! Started logfile: /image_prod/ug002_uva//J1951+0134_S_dfm.log on Thu Mar 5 04:25:43 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1951+0134_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1951+0134_S_uva.fits ! AN table 1: 45 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.754321 visibilities/baseline/integration-bin. ! Found source: J1951+0134 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 3666 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1951+0134_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.034372Jy sigma=8.299364 ! Fit after self-cal, rms=0.772036Jy sigma=6.179753 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=7.5 mas, bpa=-4.733 degrees ! Estimated noise=1.91223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.182605 Jy ! Component: 100 - total flux cleaned = 0.222425 Jy ! Total flux subtracted in 100 components = 0.222425 Jy ! Clean residual min=-0.009357 max=0.014039 Jy/beam ! Clean residual mean=0.000028 rms=0.002538 Jy/beam ! Combined flux in latest and established models = 0.222425 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.222425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080266Jy sigma=0.508576 ! Fit after self-cal, rms=0.080257Jy sigma=0.508552 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.379 mas, bmaj=8.336 mas, bpa=-2.967 degrees ! Estimated noise=1.52145 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444658 Jy ! Component: 100 - total flux cleaned = 0.00357043 Jy ! Component: 150 - total flux cleaned = 0.00305319 Jy ! Component: 200 - total flux cleaned = 0.00236145 Jy ! Total flux subtracted in 200 components = 0.00236145 Jy ! Clean residual min=-0.010722 max=0.009506 Jy/beam ! Clean residual mean=0.000034 rms=0.001989 Jy/beam ! Combined flux in latest and established models = 0.224787 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.224787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078994Jy sigma=0.498270 ! Fit after self-cal, rms=0.078973Jy sigma=0.498225 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.379 x 8.336 at -2.967 degrees (North through East) ! Clean map min=-0.010524 max=0.2334 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.00 KP 0.98 ! LA 1.06 MK 1.03 OV 0.82 PT 1.04 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 0.98 KP 1.04 ! LA 1.07 MK 1.03 OV 0.88 PT 1.02 ! SC 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.00 KP 1.04 ! LA 0.99 MK 0.96 OV 0.92 PT 1.04 ! SC 1.01 ! ! ! Fit before self-cal, rms=0.078973Jy sigma=0.498225 ! Fit after self-cal, rms=0.074375Jy sigma=0.470799 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=8.278 mas, bpa=-2.358 degrees ! Estimated noise=1.50136 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00232994 Jy ! Component: 100 - total flux cleaned = -0.00301492 Jy ! Component: 150 - total flux cleaned = -0.00332225 Jy ! Component: 200 - total flux cleaned = -0.00339013 Jy ! Total flux subtracted in 200 components = -0.00339013 Jy ! Clean residual min=-0.005871 max=0.006270 Jy/beam ! Clean residual mean=0.000002 rms=0.001466 Jy/beam ! Combined flux in latest and established models = 0.221396 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 0.221396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074058Jy sigma=0.468760 ! Fit after self-cal, rms=0.074054Jy sigma=0.468543 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074054Jy sigma=0.468543 ! Fit after self-cal, rms=0.075357Jy sigma=0.446468 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=8.276 mas, bpa=-2.002 degrees ! Estimated noise=1.50456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129218 Jy ! Component: 100 - total flux cleaned = 0.00135748 Jy ! Component: 150 - total flux cleaned = 0.00130115 Jy ! Component: 200 - total flux cleaned = 0.00125144 Jy ! Total flux subtracted in 200 components = 0.00125144 Jy ! Clean residual min=-0.002890 max=0.003661 Jy/beam ! Clean residual mean=-0.000000 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.222648 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 27 components and 0.222648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075226Jy sigma=0.445736 ! Fit after self-cal, rms=0.075378Jy sigma=0.445661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, 26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257084 Jy ! Component: 100 - total flux cleaned = 0.00270625 Jy ! Component: 150 - total flux cleaned = 0.00288712 Jy ! Component: 200 - total flux cleaned = 0.00310657 Jy ! Total flux subtracted in 200 components = 0.00310657 Jy ! Clean residual min=-0.002584 max=0.002885 Jy/beam ! Clean residual mean=0.000001 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.225754 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 0.225754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075214Jy sigma=0.444078 ! Fit after self-cal, rms=0.075210Jy sigma=0.444002 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075210Jy sigma=0.444002 ! Fit after self-cal, rms=0.075173Jy sigma=0.442323 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=8.262 mas, bpa=-1.919 degrees ! Estimated noise=1.50462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105118 Jy ! Component: 100 - total flux cleaned = 0.00133062 Jy ! Component: 150 - total flux cleaned = 0.00133157 Jy ! Component: 200 - total flux cleaned = 0.00133466 Jy ! Total flux subtracted in 200 components = 0.00133466 Jy ! Clean residual min=-0.002502 max=0.002639 Jy/beam ! Clean residual mean=0.000004 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.227089 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.227089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075089Jy sigma=0.441698 ! Fit after self-cal, rms=0.075097Jy sigma=0.441683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194594 Jy ! Component: 100 - total flux cleaned = 0.00019403 Jy ! Component: 150 - total flux cleaned = 0.000155083 Jy ! Component: 200 - total flux cleaned = 0.000190914 Jy ! Total flux subtracted in 200 components = 0.000190914 Jy ! Clean residual min=-0.002464 max=0.002507 Jy/beam ! Clean residual mean=0.000004 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.22728 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 0.22728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075049Jy sigma=0.441405 ! Fit after self-cal, rms=0.075049Jy sigma=0.441401 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075049Jy sigma=0.441401 ! Fit after self-cal, rms=0.075268Jy sigma=0.441352 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.339 mas, bmaj=13.46 mas, bpa=7.053 degrees ! Estimated noise=1.87427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126948 Jy ! Component: 100 - total flux cleaned = 0.00154618 Jy ! Component: 150 - total flux cleaned = 0.00163083 Jy ! Component: 200 - total flux cleaned = 0.00170942 Jy ! Total flux subtracted in 200 components = 0.00170942 Jy ! Clean residual min=-0.002545 max=0.002338 Jy/beam ! Clean residual mean=0.000011 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.228989 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 0.228989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075278Jy sigma=0.441393 ! Fit after self-cal, rms=0.075279Jy sigma=0.441359 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.06735e-05 Jy ! Component: 100 - total flux cleaned = 0.000160039 Jy ! Component: 150 - total flux cleaned = 0.000180272 Jy ! Component: 200 - total flux cleaned = 0.000197432 Jy ! Total flux subtracted in 200 components = 0.000197432 Jy ! Clean residual min=-0.002531 max=0.002316 Jy/beam ! Clean residual mean=0.000011 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.229187 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.229187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075287Jy sigma=0.441376 ! Fit after self-cal, rms=0.075285Jy sigma=0.441362 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=8.254 mas, bpa=-1.915 degrees ! Estimated noise=1.50605 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.338 x 8.254 at -1.915 degrees (North through East) ! Clean map min=-0.0023626 max=0.23109 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.827 mas, bmaj=7.391 mas, bpa=-3.595 degrees ! Estimated noise=1.88662 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.180146 Jy ! Component: 100 - total flux cleaned = 0.219429 Jy ! Component: 150 - total flux cleaned = 0.226843 Jy ! Component: 200 - total flux cleaned = 0.228097 Jy ! Total flux subtracted in 200 components = 0.228097 Jy ! Clean residual min=-0.003808 max=0.004421 Jy/beam ! Clean residual mean=0.000006 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.228097 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.228097 Jy ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=8.254 mas, bpa=-1.915 degrees ! Estimated noise=1.50605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178794 Jy ! Component: 100 - total flux cleaned = 0.00246985 Jy ! Component: 150 - total flux cleaned = 0.00295735 Jy ! Component: 200 - total flux cleaned = 0.00330146 Jy ! Total flux subtracted in 200 components = 0.00330146 Jy ! Clean residual min=-0.002532 max=0.002565 Jy/beam ! Clean residual mean=0.000009 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.231399 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 34 components and 0.231399 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.339 mas, bmaj=13.46 mas, bpa=7.053 degrees ! Estimated noise=1.87427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.72388e-07 Jy ! Component: 100 - total flux cleaned = 4.59651e-05 Jy ! Component: 150 - total flux cleaned = 0.000131275 Jy ! Component: 200 - total flux cleaned = 0.000245126 Jy ! Total flux subtracted in 200 components = 0.000245126 Jy ! Clean residual min=-0.002607 max=0.002363 Jy/beam ! Clean residual mean=0.000017 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.231644 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137449 Jy ! Component: 100 - total flux cleaned = 0.000170522 Jy ! Component: 150 - total flux cleaned = 0.000261297 Jy ! Component: 200 - total flux cleaned = 0.000317367 Jy ! Total flux subtracted in 200 components = 0.000317367 Jy ! Clean residual min=-0.002628 max=0.002330 Jy/beam ! Clean residual mean=0.000017 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.231961 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 63 components and 0.231961 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=8.254 mas, bpa=-1.915 degrees ! Estimated noise=1.50605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198054 Jy ! Component: 100 - total flux cleaned = -0.000318593 Jy ! Component: 150 - total flux cleaned = -0.000374893 Jy ! Component: 200 - total flux cleaned = -0.000326536 Jy ! Total flux subtracted in 200 components = -0.000326536 Jy ! Clean residual min=-0.002473 max=0.002332 Jy/beam ! Clean residual mean=0.000008 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.231635 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.231635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075199Jy sigma=0.440935 ! Fit after self-cal, rms=0.075199Jy sigma=0.440869 wmodel J1951+0134_S_map.mod ! Writing 78 model components to file: J1951+0134_S_map.mod wobs J1951+0134_S_uvs.fits ! Writing UV FITS file: J1951+0134_S_uvs.fits wwins J1951+0134_S_map.win ! wwins: Wrote 3 windows to J1951+0134_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00045826 Jy ! Component: 100 - total flux cleaned = -0.000748001 Jy ! Component: 150 - total flux cleaned = -0.00110189 Jy ! Component: 200 - total flux cleaned = -0.00140194 Jy ! Component: 250 - total flux cleaned = -0.00151029 Jy ! Component: 300 - total flux cleaned = -0.00157991 Jy ! Component: 350 - total flux cleaned = -0.00164701 Jy ! Component: 400 - total flux cleaned = -0.00158138 Jy ! Component: 450 - total flux cleaned = -0.00158165 Jy ! Component: 500 - total flux cleaned = -0.0016431 Jy ! Component: 550 - total flux cleaned = -0.0016723 Jy ! Component: 600 - total flux cleaned = -0.00178912 Jy ! Component: 650 - total flux cleaned = -0.0018742 Jy ! Component: 700 - total flux cleaned = -0.00190261 Jy ! Component: 750 - total flux cleaned = -0.00198509 Jy ! Component: 800 - total flux cleaned = -0.00209232 Jy ! Component: 850 - total flux cleaned = -0.00209207 Jy ! Component: 900 - total flux cleaned = -0.00219487 Jy ! Component: 950 - total flux cleaned = -0.00219416 Jy ! Component: 1000 - total flux cleaned = -0.00211921 Jy ! Component: 1050 - total flux cleaned = -0.00214407 Jy ! Component: 1100 - total flux cleaned = -0.00221671 Jy ! Component: 1150 - total flux cleaned = -0.00224044 Jy ! Component: 1200 - total flux cleaned = -0.00235743 Jy ! Component: 1250 - total flux cleaned = -0.00238065 Jy ! Component: 1300 - total flux cleaned = -0.0024488 Jy ! Component: 1350 - total flux cleaned = -0.00253844 Jy ! Component: 1400 - total flux cleaned = -0.00256045 Jy ! Component: 1450 - total flux cleaned = -0.00262591 Jy ! Component: 1500 - total flux cleaned = -0.00262582 Jy ! Component: 1550 - total flux cleaned = -0.00269007 Jy ! Component: 1600 - total flux cleaned = -0.0027321 Jy ! Component: 1650 - total flux cleaned = -0.0027529 Jy ! Component: 1700 - total flux cleaned = -0.00285467 Jy ! Component: 1750 - total flux cleaned = -0.00289493 Jy ! Component: 1800 - total flux cleaned = -0.00289498 Jy ! Component: 1850 - total flux cleaned = -0.00301279 Jy ! Component: 1900 - total flux cleaned = -0.00301254 Jy ! Component: 1950 - total flux cleaned = -0.00310836 Jy ! Component: 2000 - total flux cleaned = -0.00314625 Jy ! Component: 2050 - total flux cleaned = -0.00316514 Jy ! Component: 2100 - total flux cleaned = -0.00323976 Jy ! Component: 2150 - total flux cleaned = -0.00329492 Jy ! Component: 2200 - total flux cleaned = -0.0033311 Jy ! Component: 2250 - total flux cleaned = -0.00336705 Jy ! Component: 2300 - total flux cleaned = -0.00334933 Jy ! Component: 2350 - total flux cleaned = -0.00343714 Jy ! Component: 2400 - total flux cleaned = -0.00338475 Jy ! Component: 2450 - total flux cleaned = -0.00343669 Jy ! Component: 2500 - total flux cleaned = -0.00343672 Jy ! Component: 2550 - total flux cleaned = -0.00348743 Jy ! Component: 2600 - total flux cleaned = -0.00357128 Jy ! Component: 2650 - total flux cleaned = -0.00353798 Jy ! Component: 2700 - total flux cleaned = -0.00353827 Jy ! Component: 2750 - total flux cleaned = -0.00365269 Jy ! Component: 2800 - total flux cleaned = -0.00370128 Jy ! Component: 2850 - total flux cleaned = -0.00371731 Jy ! Component: 2900 - total flux cleaned = -0.00378107 Jy ! Component: 2950 - total flux cleaned = -0.00382843 Jy ! Component: 3000 - total flux cleaned = -0.00390656 Jy ! Component: 3050 - total flux cleaned = -0.00390649 Jy ! Component: 3100 - total flux cleaned = -0.00398343 Jy ! Component: 3150 - total flux cleaned = -0.00401391 Jy ! Component: 3200 - total flux cleaned = -0.00407454 Jy ! Component: 3250 - total flux cleaned = -0.00411947 Jy ! Component: 3300 - total flux cleaned = -0.00411926 Jy ! Component: 3350 - total flux cleaned = -0.0041339 Jy ! Component: 3400 - total flux cleaned = -0.00411929 Jy ! Component: 3450 - total flux cleaned = -0.00413395 Jy ! Component: 3500 - total flux cleaned = -0.00417741 Jy ! Component: 3550 - total flux cleaned = -0.00422044 Jy ! Component: 3600 - total flux cleaned = -0.00422044 Jy ! Component: 3650 - total flux cleaned = -0.00423452 Jy ! Component: 3700 - total flux cleaned = -0.00423471 Jy ! Component: 3750 - total flux cleaned = -0.0043324 Jy ! Component: 3800 - total flux cleaned = -0.00431853 Jy ! Component: 3850 - total flux cleaned = -0.00435972 Jy ! Component: 3900 - total flux cleaned = -0.00438698 Jy ! Component: 3950 - total flux cleaned = -0.00441399 Jy ! Component: 4000 - total flux cleaned = -0.00442748 Jy ! Component: 4050 - total flux cleaned = -0.00441412 Jy ! Total flux subtracted in 4096 components = -0.00442754 Jy ! Clean residual min=-0.000847 max=0.000701 Jy/beam ! Clean residual mean=0.000000 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.227207 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 352 components and 0.227207 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1951+0134_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.338 x 8.254 at -1.915 degrees (North through East) ! Clean map min=-0.0018754 max=0.22968 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1951+0134_S_map.fits wmodel /image_prod/ug002_uva//J1951+0134_S_map.mod ! Writing 352 model components to file: /image_prod/ug002_uva//J1951+0134_S_map.mod wobs /image_prod/ug002_uva//J1951+0134_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1951+0134_S_uvs.fits wwins /image_prod/ug002_uva//J1951+0134_S_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1951+0134_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.229681 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000236816 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.30932 0.30932 0.618641 1.23728 2.47456 4.94912 9.89825 19.7965 39.593 79.186 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.229 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 969.868 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1951+0134_S_dfm.log closed on Thu Mar 5 04:25:46 2020