! Started logfile: /image_prod/ug002_uva//J1948+3556_X_dfm.log on Thu Mar 5 04:24:21 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1948+3556_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1948+3556_X_uva.fits ! AN table 1: 90 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.982963 visibilities/baseline/integration-bin. ! Found source: J1948+3556 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 47772 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1948+3556_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011383Jy sigma=9.149758 ! Fit after self-cal, rms=0.884198Jy sigma=7.969012 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7433 mas, bmaj=1.252 mas, bpa=-10.44 degrees ! Estimated noise=0.810541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0788595 Jy ! Component: 100 - total flux cleaned = 0.110698 Jy ! Total flux subtracted in 100 components = 0.110698 Jy ! Clean residual min=-0.005087 max=0.014829 Jy/beam ! Clean residual mean=-0.000000 rms=0.001358 Jy/beam ! Combined flux in latest and established models = 0.110698 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.110698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071155Jy sigma=0.609994 ! Fit after self-cal, rms=0.071018Jy sigma=0.608840 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175833 Jy ! Component: 100 - total flux cleaned = 0.0281129 Jy ! Total flux subtracted in 100 components = 0.0281129 Jy ! Clean residual min=-0.004195 max=0.006051 Jy/beam ! Clean residual mean=0.000000 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.13881 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.13881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064112Jy sigma=0.535276 ! Fit after self-cal, rms=0.064099Jy sigma=0.535143 ! Inverting map ! Added new window around map position (2, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00762278 Jy ! Component: 100 - total flux cleaned = 0.0135376 Jy ! Total flux subtracted in 100 components = 0.0135376 Jy ! Clean residual min=-0.003902 max=0.004839 Jy/beam ! Clean residual mean=0.000001 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.152348 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 0.152348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062346Jy sigma=0.515687 ! Fit after self-cal, rms=0.062309Jy sigma=0.515315 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9904 mas, bmaj=1.567 mas, bpa=-9.459 degrees ! Estimated noise=0.364929 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00901024 Jy ! Component: 100 - total flux cleaned = 0.0149736 Jy ! Component: 150 - total flux cleaned = 0.0191399 Jy ! Component: 200 - total flux cleaned = 0.0221704 Jy ! Total flux subtracted in 200 components = 0.0221704 Jy ! Clean residual min=-0.003761 max=0.005060 Jy/beam ! Clean residual mean=0.000001 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.174518 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 63 components and 0.174518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060895Jy sigma=0.498745 ! Fit after self-cal, rms=0.060836Jy sigma=0.498026 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9904 x 1.567 at -9.459 degrees (North through East) ! Clean map min=-0.0035149 max=0.11363 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.08 KP 1.02 ! LA 1.02 MK 1.10 NL 1.16 OV 0.91 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.05 KP 1.01 ! LA 1.02 MK 1.07 NL 1.16 OV 0.92 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.02 KP 1.01 ! LA 1.05 MK 1.07 NL 1.15 OV 0.91 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.04 KP 1.03 ! LA 1.01 MK 1.11 NL 1.18 OV 0.93 ! PT 0.89 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.05 KP 1.01 ! LA 1.02 MK 1.03 NL 1.15 OV 0.93 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.03 KP 1.03 ! LA 1.02 MK 1.02 NL 1.13 OV 0.92 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 0.97 KP 1.03 ! LA 1.02 MK 1.01 NL 1.13 OV 0.94 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 1.04 KP 1.02 ! LA 1.01 MK 0.98 NL 1.16 OV 0.92 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 0.99 KP 1.02 ! LA 1.02 MK 1.01 NL 1.13 OV 0.92 ! PT 0.88 SC 0.92 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.02 KP 0.99 ! LA 1.01 MK 0.99 NL 1.15 OV 0.92 ! PT 0.89 SC 0.92 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.92 HN 0.99 KP 1.01 ! LA 1.03 MK 0.96 NL 1.14 OV 0.94 ! PT 0.89 SC 0.94 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.89 HN 1.02 KP 1.00 ! LA 1.04 MK 0.93 NL 1.15 OV 0.94 ! PT 0.94 SC 0.94 ! ! ! Fit before self-cal, rms=0.060836Jy sigma=0.498026 ! Fit after self-cal, rms=0.058229Jy sigma=0.485742 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9972 mas, bmaj=1.573 mas, bpa=-8.503 degrees ! Estimated noise=0.362766 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000976966 Jy ! Component: 100 - total flux cleaned = -0.00097853 Jy ! Component: 150 - total flux cleaned = -0.000925086 Jy ! Component: 200 - total flux cleaned = -0.000877991 Jy ! Total flux subtracted in 200 components = -0.000877991 Jy ! Clean residual min=-0.002789 max=0.003306 Jy/beam ! Clean residual mean=0.000004 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.17364 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 0.17364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058191Jy sigma=0.485461 ! Fit after self-cal, rms=0.058195Jy sigma=0.485352 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058195Jy sigma=0.485352 ! Fit after self-cal, rms=0.059189Jy sigma=0.474745 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9899 mas, bmaj=1.579 mas, bpa=-8.348 degrees ! Estimated noise=0.362374 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121525 Jy ! Component: 100 - total flux cleaned = -8.81867e-05 Jy ! Component: 150 - total flux cleaned = -8.81532e-05 Jy ! Component: 200 - total flux cleaned = -6.65691e-05 Jy ! Total flux subtracted in 200 components = -6.65691e-05 Jy ! Clean residual min=-0.001170 max=0.002842 Jy/beam ! Clean residual mean=0.000002 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.173574 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 76 components and 0.173574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059156Jy sigma=0.474480 ! Fit after self-cal, rms=0.059219Jy sigma=0.474386 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221637 Jy ! Component: 100 - total flux cleaned = 0.00235371 Jy ! Component: 150 - total flux cleaned = 0.0023204 Jy ! Component: 200 - total flux cleaned = 0.00229253 Jy ! Total flux subtracted in 200 components = 0.00229253 Jy ! Clean residual min=-0.001086 max=0.001687 Jy/beam ! Clean residual mean=0.000002 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.175866 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 96 components and 0.175866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059125Jy sigma=0.473496 ! Fit after self-cal, rms=0.059115Jy sigma=0.473435 ! Inverting map ! Added new window around map position (36.4, -15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164277 Jy ! Component: 100 - total flux cleaned = 0.00267986 Jy ! Component: 150 - total flux cleaned = 0.00347132 Jy ! Component: 200 - total flux cleaned = 0.00396554 Jy ! Total flux subtracted in 200 components = 0.00396554 Jy ! Clean residual min=-0.001028 max=0.001196 Jy/beam ! Clean residual mean=0.000001 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.179832 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 120 components and 0.179832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059062Jy sigma=0.472817 ! Fit after self-cal, rms=0.059057Jy sigma=0.472772 ! Inverting map ! Added new window around map position (-0.8, -7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000622664 Jy ! Component: 100 - total flux cleaned = 0.00077042 Jy ! Component: 150 - total flux cleaned = 0.00101284 Jy ! Component: 200 - total flux cleaned = 0.00127859 Jy ! Total flux subtracted in 200 components = 0.00127859 Jy ! Clean residual min=-0.000952 max=0.001060 Jy/beam ! Clean residual mean=0.000001 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.181111 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 135 components and 0.181111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059024Jy sigma=0.472488 ! Fit after self-cal, rms=0.059022Jy sigma=0.472480 ! Inverting map ! Added new window around map position (-9.6, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000693335 Jy ! Component: 100 - total flux cleaned = 0.0010743 Jy ! Component: 150 - total flux cleaned = 0.00134684 Jy ! Component: 200 - total flux cleaned = 0.00155969 Jy ! Total flux subtracted in 200 components = 0.00155969 Jy ! Clean residual min=-0.000847 max=0.000962 Jy/beam ! Clean residual mean=0.000001 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.18267 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 150 components and 0.18267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058998Jy sigma=0.472255 ! Fit after self-cal, rms=0.058996Jy sigma=0.472246 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058996Jy sigma=0.472246 ! Fit after self-cal, rms=0.059016Jy sigma=0.472074 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9899 mas, bmaj=1.577 mas, bpa=-7.846 degrees ! Estimated noise=0.362026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000460101 Jy ! Component: 100 - total flux cleaned = 0.000767284 Jy ! Component: 150 - total flux cleaned = 0.00102365 Jy ! Component: 200 - total flux cleaned = 0.0011032 Jy ! Total flux subtracted in 200 components = 0.0011032 Jy ! Clean residual min=-0.000810 max=0.000951 Jy/beam ! Clean residual mean=0.000001 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.183773 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 165 components and 0.183773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059000Jy sigma=0.471921 ! Fit after self-cal, rms=0.059002Jy sigma=0.471912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20.6, -43.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102977 Jy ! Component: 100 - total flux cleaned = 0.00166502 Jy ! Component: 150 - total flux cleaned = 0.00193772 Jy ! Component: 200 - total flux cleaned = 0.00216661 Jy ! Total flux subtracted in 200 components = 0.00216661 Jy ! Clean residual min=-0.000736 max=0.000828 Jy/beam ! Clean residual mean=0.000001 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.18594 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 184 components and 0.18594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058979Jy sigma=0.471675 ! Fit after self-cal, rms=0.058977Jy sigma=0.471663 ! Inverting map ! Added new window around map position (38.8, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000744603 Jy ! Component: 100 - total flux cleaned = 0.000962553 Jy ! Component: 150 - total flux cleaned = 0.00103445 Jy ! Component: 200 - total flux cleaned = 0.0010681 Jy ! Total flux subtracted in 200 components = 0.0010681 Jy ! Clean residual min=-0.000773 max=0.000749 Jy/beam ! Clean residual mean=0.000001 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.187008 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 198 components and 0.187008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058963Jy sigma=0.471527 ! Fit after self-cal, rms=0.058961Jy sigma=0.471523 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058961Jy sigma=0.471523 ! Fit after self-cal, rms=0.059044Jy sigma=0.471499 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.251 mas, bmaj=2.604 mas, bpa=-0.2832 degrees ! Estimated noise=0.442847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000638511 Jy ! Component: 100 - total flux cleaned = 0.00105888 Jy ! Component: 150 - total flux cleaned = 0.0014128 Jy ! Component: 200 - total flux cleaned = 0.00172578 Jy ! Total flux subtracted in 200 components = 0.00172578 Jy ! Clean residual min=-0.000843 max=0.000740 Jy/beam ! Clean residual mean=0.000002 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.188734 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 214 components and 0.188734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059039Jy sigma=0.471444 ! Fit after self-cal, rms=0.059040Jy sigma=0.471441 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261753 Jy ! Component: 100 - total flux cleaned = 0.0004546 Jy ! Component: 150 - total flux cleaned = 0.000548464 Jy ! Component: 200 - total flux cleaned = 0.000645981 Jy ! Total flux subtracted in 200 components = 0.000645981 Jy ! Clean residual min=-0.000825 max=0.000720 Jy/beam ! Clean residual mean=0.000001 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.18938 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 229 components and 0.18938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059038Jy sigma=0.471422 ! Fit after self-cal, rms=0.059038Jy sigma=0.471421 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9893 mas, bmaj=1.577 mas, bpa=-7.669 degrees ! Estimated noise=0.362162 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9893 x 1.577 at -7.669 degrees (North through East) ! Clean map min=-0.00071504 max=0.11234 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7397 mas, bmaj=1.26 mas, bpa=-8.771 degrees ! Estimated noise=0.805743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0784581 Jy ! Component: 100 - total flux cleaned = 0.110713 Jy ! Component: 150 - total flux cleaned = 0.127988 Jy ! Component: 200 - total flux cleaned = 0.138377 Jy ! Total flux subtracted in 200 components = 0.138377 Jy ! Clean residual min=-0.002681 max=0.005363 Jy/beam ! Clean residual mean=0.000000 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.138377 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.138377 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9893 mas, bmaj=1.577 mas, bpa=-7.669 degrees ! Estimated noise=0.362162 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116979 Jy ! Component: 100 - total flux cleaned = 0.0192935 Jy ! Component: 150 - total flux cleaned = 0.0245874 Jy ! Component: 200 - total flux cleaned = 0.0283442 Jy ! Total flux subtracted in 200 components = 0.0283442 Jy ! Clean residual min=-0.001417 max=0.002449 Jy/beam ! Clean residual mean=0.000000 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.166721 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 53 components and 0.166721 Jy ! Inverting map ! Added new window around map position (1, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285194 Jy ! Component: 100 - total flux cleaned = 0.00505003 Jy ! Component: 150 - total flux cleaned = 0.0068805 Jy ! Component: 200 - total flux cleaned = 0.00846177 Jy ! Total flux subtracted in 200 components = 0.00846177 Jy ! Clean residual min=-0.001080 max=0.001530 Jy/beam ! Clean residual mean=0.000001 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.175183 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 89 components and 0.175183 Jy ! Inverting map ! Added new window around map position (-1, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156567 Jy ! Component: 100 - total flux cleaned = 0.00284412 Jy ! Component: 150 - total flux cleaned = 0.00399395 Jy ! Component: 200 - total flux cleaned = 0.00504409 Jy ! Total flux subtracted in 200 components = 0.00504409 Jy ! Clean residual min=-0.000966 max=0.001038 Jy/beam ! Clean residual mean=0.000001 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.180227 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 118 components and 0.180227 Jy ! Inverting map ! Added new window around map position (28.2, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103966 Jy ! Component: 100 - total flux cleaned = 0.00180246 Jy ! Component: 150 - total flux cleaned = 0.00250658 Jy ! Component: 200 - total flux cleaned = 0.00309952 Jy ! Total flux subtracted in 200 components = 0.00309952 Jy ! Clean residual min=-0.000871 max=0.000882 Jy/beam ! Clean residual mean=0.000001 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.183327 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 136 components and 0.183327 Jy ! Inverting map ! Added new window around map position (22, -40). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000859438 Jy ! Component: 100 - total flux cleaned = 0.00139735 Jy ! Component: 150 - total flux cleaned = 0.00187493 Jy ! Component: 200 - total flux cleaned = 0.00222566 Jy ! Total flux subtracted in 200 components = 0.00222566 Jy ! Clean residual min=-0.000794 max=0.000751 Jy/beam ! Clean residual mean=0.000001 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.185552 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 160 components and 0.185552 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.251 mas, bmaj=2.604 mas, bpa=-0.2832 degrees ! Estimated noise=0.442847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000920422 Jy ! Component: 100 - total flux cleaned = 0.00143681 Jy ! Component: 150 - total flux cleaned = 0.00197785 Jy ! Component: 200 - total flux cleaned = 0.00245597 Jy ! Total flux subtracted in 200 components = 0.00245597 Jy ! Clean residual min=-0.000843 max=0.000778 Jy/beam ! Clean residual mean=0.000001 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.188008 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000389873 Jy ! Component: 100 - total flux cleaned = 0.000688193 Jy ! Component: 150 - total flux cleaned = 0.000927345 Jy ! Component: 200 - total flux cleaned = 0.0010742 Jy ! Total flux subtracted in 200 components = 0.0010742 Jy ! Clean residual min=-0.000746 max=0.000756 Jy/beam ! Clean residual mean=0.000001 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.189082 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 221 components and 0.189082 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9893 mas, bmaj=1.577 mas, bpa=-7.669 degrees ! Estimated noise=0.362162 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110261 Jy ! Component: 100 - total flux cleaned = -0.000110178 Jy ! Component: 150 - total flux cleaned = -0.00011157 Jy ! Component: 200 - total flux cleaned = -0.000111858 Jy ! Total flux subtracted in 200 components = -0.000111858 Jy ! Clean residual min=-0.000705 max=0.000709 Jy/beam ! Clean residual mean=0.000000 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.188971 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 241 components and 0.188971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059026Jy sigma=0.471313 ! Fit after self-cal, rms=0.059020Jy sigma=0.471273 wmodel J1948+3556_X_map.mod ! Writing 241 model components to file: J1948+3556_X_map.mod wobs J1948+3556_X_uvs.fits ! Writing UV FITS file: J1948+3556_X_uvs.fits wwins J1948+3556_X_map.win ! wwins: Wrote 12 windows to J1948+3556_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138938 Jy ! Component: 100 - total flux cleaned = -0.000246494 Jy ! Component: 150 - total flux cleaned = -0.000281061 Jy ! Component: 200 - total flux cleaned = -0.000292385 Jy ! Component: 250 - total flux cleaned = -0.000325254 Jy ! Component: 300 - total flux cleaned = -0.000303533 Jy ! Component: 350 - total flux cleaned = -0.000313885 Jy ! Component: 400 - total flux cleaned = -0.000282657 Jy ! Component: 450 - total flux cleaned = -0.000282667 Jy ! Component: 500 - total flux cleaned = -0.000332756 Jy ! Component: 550 - total flux cleaned = -0.000372161 Jy ! Component: 600 - total flux cleaned = -0.000391588 Jy ! Component: 650 - total flux cleaned = -0.000430347 Jy ! Component: 700 - total flux cleaned = -0.000458922 Jy ! Component: 750 - total flux cleaned = -0.000468366 Jy ! Component: 800 - total flux cleaned = -0.000487044 Jy ! Component: 850 - total flux cleaned = -0.00049617 Jy ! Component: 900 - total flux cleaned = -0.000532736 Jy ! Component: 950 - total flux cleaned = -0.000523687 Jy ! Component: 1000 - total flux cleaned = -0.000550758 Jy ! Component: 1050 - total flux cleaned = -0.000550917 Jy ! Component: 1100 - total flux cleaned = -0.00054221 Jy ! Component: 1150 - total flux cleaned = -0.000585877 Jy ! Component: 1200 - total flux cleaned = -0.000568553 Jy ! Component: 1250 - total flux cleaned = -0.000620138 Jy ! Component: 1300 - total flux cleaned = -0.000611611 Jy ! Component: 1350 - total flux cleaned = -0.000577813 Jy ! Component: 1400 - total flux cleaned = -0.000636522 Jy ! Component: 1450 - total flux cleaned = -0.000628084 Jy ! Component: 1500 - total flux cleaned = -0.000611539 Jy ! Component: 1550 - total flux cleaned = -0.000603489 Jy ! Component: 1600 - total flux cleaned = -0.000611629 Jy ! Component: 1650 - total flux cleaned = -0.000595382 Jy ! Component: 1700 - total flux cleaned = -0.000619367 Jy ! Component: 1750 - total flux cleaned = -0.000611379 Jy ! Component: 1800 - total flux cleaned = -0.00060349 Jy ! Component: 1850 - total flux cleaned = -0.00061914 Jy ! Component: 1900 - total flux cleaned = -0.000619135 Jy ! Component: 1950 - total flux cleaned = -0.000626852 Jy ! Component: 2000 - total flux cleaned = -0.000619058 Jy ! Component: 2050 - total flux cleaned = -0.000634259 Jy ! Component: 2100 - total flux cleaned = -0.000634212 Jy ! Component: 2150 - total flux cleaned = -0.00064932 Jy ! Component: 2200 - total flux cleaned = -0.00065679 Jy ! Component: 2250 - total flux cleaned = -0.00063447 Jy ! Component: 2300 - total flux cleaned = -0.000619653 Jy ! Component: 2350 - total flux cleaned = -0.000627066 Jy ! Component: 2400 - total flux cleaned = -0.000641658 Jy ! Component: 2450 - total flux cleaned = -0.000619852 Jy ! Component: 2500 - total flux cleaned = -0.000619881 Jy ! Component: 2550 - total flux cleaned = -0.000612703 Jy ! Component: 2600 - total flux cleaned = -0.000612637 Jy ! Component: 2650 - total flux cleaned = -0.000591279 Jy ! Component: 2700 - total flux cleaned = -0.000591235 Jy ! Component: 2750 - total flux cleaned = -0.000605311 Jy ! Component: 2800 - total flux cleaned = -0.000591304 Jy ! Component: 2850 - total flux cleaned = -0.000577401 Jy ! Component: 2900 - total flux cleaned = -0.000570489 Jy ! Component: 2950 - total flux cleaned = -0.000556718 Jy ! Component: 3000 - total flux cleaned = -0.000542973 Jy ! Component: 3050 - total flux cleaned = -0.000529372 Jy ! Component: 3100 - total flux cleaned = -0.000509114 Jy ! Component: 3150 - total flux cleaned = -0.000509102 Jy ! Component: 3200 - total flux cleaned = -0.00050246 Jy ! Component: 3250 - total flux cleaned = -0.000502478 Jy ! Component: 3300 - total flux cleaned = -0.000522373 Jy ! Component: 3350 - total flux cleaned = -0.000495931 Jy ! Component: 3400 - total flux cleaned = -0.000463111 Jy ! Component: 3450 - total flux cleaned = -0.00047614 Jy ! Component: 3500 - total flux cleaned = -0.000476073 Jy ! Component: 3550 - total flux cleaned = -0.000456753 Jy ! Component: 3600 - total flux cleaned = -0.000424599 Jy ! Component: 3650 - total flux cleaned = -0.000443849 Jy ! Component: 3700 - total flux cleaned = -0.000450218 Jy ! Component: 3750 - total flux cleaned = -0.000437549 Jy ! Component: 3800 - total flux cleaned = -0.00043752 Jy ! Component: 3850 - total flux cleaned = -0.000431219 Jy ! Component: 3900 - total flux cleaned = -0.000437524 Jy ! Component: 3950 - total flux cleaned = -0.000431307 Jy ! Component: 4000 - total flux cleaned = -0.000387884 Jy ! Component: 4050 - total flux cleaned = -0.000394045 Jy ! Total flux subtracted in 4096 components = -0.000406378 Jy ! Clean residual min=-0.000355 max=0.000368 Jy/beam ! Clean residual mean=-0.000000 rms=0.000106 Jy/beam ! Combined flux in latest and established models = 0.188564 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 563 components and 0.188564 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1948+3556_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9893 x 1.577 at -7.669 degrees (North through East) ! Clean map min=-0.0005277 max=0.11261 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1948+3556_X_map.fits wmodel /image_prod/ug002_uva//J1948+3556_X_map.mod ! Writing 563 model components to file: /image_prod/ug002_uva//J1948+3556_X_map.mod wobs /image_prod/ug002_uva//J1948+3556_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1948+3556_X_uvs.fits wwins /image_prod/ug002_uva//J1948+3556_X_map.win ! wwins: Wrote 13 windows to /image_prod/ug002_uva//J1948+3556_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.112609 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000105747 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.28172 0.28172 0.563441 1.12688 2.25376 4.50753 9.01506 18.0301 36.0602 72.1204 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.112 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1064.89 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1948+3556_X_dfm.log closed on Thu Mar 5 04:24:28 2020