! Started logfile: /image_prod/ug002_uva//J1938+664A_S_b_dfm.log on Thu Mar  5 04:19:04 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1938+664A_S_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1938+664A_S_b_uva.fits
! AN table 1: 110 integrations on 15 of 15 possible baselines.
! AN table 2: 110 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.498182 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1938+664A
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4110 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1938+664A_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 360 telescope corrections were flagged in sub-array 1.
!  A total of 300 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 360 telescope corrections were flagged in sub-array 1.
!  A total of 300 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 360 telescope corrections were flagged in sub-array 1.
!  A total of 300 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.006060Jy  sigma=8.704978
! Fit after  self-cal, rms=0.954487Jy  sigma=8.320702
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.84 mas, bmaj=16.59 mas, bpa=27.87 degrees
! Estimated noise=2.95493 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0362011 Jy
! Component: 100  -  total flux cleaned = 0.0486369 Jy
! Total flux subtracted in 100 components = 0.0486369 Jy
! Clean residual min=-0.010508 max=0.010478 Jy/beam
! Clean residual mean=-0.000131 rms=0.005768 Jy/beam
! Combined flux in latest and established models = 0.0486369 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 50 components and 0.0486369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068287Jy  sigma=0.584629
! Fit after  self-cal, rms=0.066959Jy  sigma=0.574115
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.033 mas, bmaj=16.1 mas, bpa=28 degrees
! Estimated noise=1.3488 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013043 Jy
! Component: 100  -  total flux cleaned = 0.0182981 Jy
! Component: 150  -  total flux cleaned = 0.0187982 Jy
! Component: 200  -  total flux cleaned = 0.0179963 Jy
! Total flux subtracted in 200 components = 0.0179963 Jy
! Clean residual min=-0.006644 max=0.006617 Jy/beam
! Clean residual mean=-0.000101 rms=0.004138 Jy/beam
! Combined flux in latest and established models = 0.0666332 Jy
! Performing phase self-cal
! Adding 161 model components to the UV plane model.
! The established model now contains 209 components and 0.0666332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059459Jy  sigma=0.497745
! Fit after  self-cal, rms=0.058870Jy  sigma=0.493510
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.033 x 16.1 at 28 degrees (North through East)
! Clean map  min=-0.010913  max=0.045392 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.09     KP        0.66     NL        1.17     
!   OV        1.33     PT        0.64     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.10     FD        1.12     KP        0.96     LA        0.85     
!   OV        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.58     HN        0.93     KP        0.75     NL        1.18     
!   OV        1.13     PT        0.63     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.07     FD        0.94     KP        1.00     LA        1.09     
!   OV        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.38     HN        0.86     KP        0.72     NL        1.20     
!   OV        1.42     PT        0.67     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.98     KP        0.94     LA        0.90     
!   OV        1.13     
! 
! 
! Fit before self-cal, rms=0.058870Jy  sigma=0.493510
! Fit after  self-cal, rms=0.056915Jy  sigma=0.425924
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.963 mas, bmaj=17.58 mas, bpa=27.17 degrees
! Estimated noise=1.22853 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00570553 Jy
! Component: 100  -  total flux cleaned = 0.00782162 Jy
! Component: 150  -  total flux cleaned = 0.00845444 Jy
! Component: 200  -  total flux cleaned = 0.00958913 Jy
! Total flux subtracted in 200 components = 0.00958913 Jy
! Clean residual min=-0.001361 max=0.001362 Jy/beam
! Clean residual mean=0.000007 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.0762223 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 269 components and 0.0762223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056082Jy  sigma=0.418493
! Fit after  self-cal, rms=0.056301Jy  sigma=0.416619
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056301Jy  sigma=0.416619
! Fit after  self-cal, rms=0.055129Jy  sigma=0.416205
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.867 mas, bmaj=17.59 mas, bpa=27.34 degrees
! Estimated noise=1.19268 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162848 Jy
! Component: 100  -  total flux cleaned = 0.0025912 Jy
! Component: 150  -  total flux cleaned = 0.00353204 Jy
! Component: 200  -  total flux cleaned = 0.00450257 Jy
! Total flux subtracted in 200 components = 0.00450257 Jy
! Clean residual min=-0.000945 max=0.000950 Jy/beam
! Clean residual mean=0.000003 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.0807249 Jy
selfcal
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 323 components and 0.0807249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054868Jy  sigma=0.414028
! Fit after  self-cal, rms=0.054779Jy  sigma=0.413265
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000743463 Jy
! Component: 100  -  total flux cleaned = 0.00160226 Jy
! Component: 150  -  total flux cleaned = 0.00239602 Jy
! Component: 200  -  total flux cleaned = 0.00326627 Jy
! Total flux subtracted in 200 components = 0.00326627 Jy
! Clean residual min=-0.000866 max=0.000870 Jy/beam
! Clean residual mean=0.000004 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.0839911 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 371 components and 0.0839911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054552Jy  sigma=0.411670
! Fit after  self-cal, rms=0.054498Jy  sigma=0.411179
! Inverting map 
! Added new window around map position (-122.5, 13.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00026998 Jy
! Component: 100  -  total flux cleaned = 3.18914e-05 Jy
! Component: 150  -  total flux cleaned = -4.64693e-05 Jy
! Component: 200  -  total flux cleaned = -8.18191e-05 Jy
! Total flux subtracted in 200 components = -8.18191e-05 Jy
! Clean residual min=-0.001343 max=0.001513 Jy/beam
! Clean residual mean=0.000003 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.0839093 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 395 components and 0.0839093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054367Jy  sigma=0.410617
! Fit after  self-cal, rms=0.054348Jy  sigma=0.410418
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054348Jy  sigma=0.410418
! Fit after  self-cal, rms=0.054062Jy  sigma=0.410232
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.838 mas, bmaj=17.61 mas, bpa=27.33 degrees
! Estimated noise=1.17265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.53903e-05 Jy
! Component: 100  -  total flux cleaned = -0.000211303 Jy
! Component: 150  -  total flux cleaned = -0.000214143 Jy
! Component: 200  -  total flux cleaned = -0.000186852 Jy
! Total flux subtracted in 200 components = -0.000186852 Jy
! Clean residual min=-0.001272 max=0.001549 Jy/beam
! Clean residual mean=0.000002 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.0837224 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 415 components and 0.0837224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053968Jy  sigma=0.409863
! Fit after  self-cal, rms=0.053997Jy  sigma=0.409643
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000131143 Jy
! Component: 100  -  total flux cleaned = -0.00012818 Jy
! Component: 150  -  total flux cleaned = -0.000153353 Jy
! Component: 200  -  total flux cleaned = -8.47785e-05 Jy
! Total flux subtracted in 200 components = -8.47785e-05 Jy
! Clean residual min=-0.001360 max=0.001640 Jy/beam
! Clean residual mean=0.000003 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.0836377 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 429 components and 0.0836377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053940Jy  sigma=0.409448
! Fit after  self-cal, rms=0.053934Jy  sigma=0.409385
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053934Jy  sigma=0.409385
! Fit after  self-cal, rms=0.054310Jy  sigma=0.409257
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.809 mas, bmaj=17.02 mas, bpa=26.63 degrees
! Estimated noise=1.25792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000402311 Jy
! Component: 100  -  total flux cleaned = -0.000402698 Jy
! Component: 150  -  total flux cleaned = -0.000270836 Jy
! Component: 200  -  total flux cleaned = -0.000158467 Jy
! Total flux subtracted in 200 components = -0.000158467 Jy
! Clean residual min=-0.001214 max=0.001605 Jy/beam
! Clean residual mean=0.000001 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.0834792 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 453 components and 0.0834792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054256Jy  sigma=0.409114
! Fit after  self-cal, rms=0.054286Jy  sigma=0.409044
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000175199 Jy
! Component: 100  -  total flux cleaned = -0.000151695 Jy
! Component: 150  -  total flux cleaned = -0.000129573 Jy
! Component: 200  -  total flux cleaned = -0.000109302 Jy
! Total flux subtracted in 200 components = -0.000109302 Jy
! Clean residual min=-0.001312 max=0.001624 Jy/beam
! Clean residual mean=0.000003 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.0833699 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 469 components and 0.0833699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054254Jy  sigma=0.408979
! Fit after  self-cal, rms=0.054257Jy  sigma=0.408942
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.811 mas, bmaj=17.63 mas, bpa=27.38 degrees
! Estimated noise=1.16227 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.811 x 17.63 at 27.38 degrees (North through East)
! Clean map  min=-0.0045463  max=0.038745 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.669 mas, bmaj=18.5 mas, bpa=27.15 degrees
! Estimated noise=2.49169 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.90881e-05 Jy
! Component: 100  -  total flux cleaned = -9.27128e-05 Jy
! Component: 150  -  total flux cleaned = -9.11635e-05 Jy
! Component: 200  -  total flux cleaned = 0.000475989 Jy
! Total flux subtracted in 200 components = 0.000475989 Jy
! Clean residual min=-0.017215 max=0.028718 Jy/beam
! Clean residual mean=-0.000137 rms=0.006664 Jy/beam
! Combined flux in latest and established models = 0.00047599 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.00047599 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.811 mas, bmaj=17.63 mas, bpa=27.38 degrees
! Estimated noise=1.16227 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0310544 Jy
! Component: 100  -  total flux cleaned = 0.0461306 Jy
! Component: 150  -  total flux cleaned = 0.0573116 Jy
! Component: 200  -  total flux cleaned = 0.0660509 Jy
! Total flux subtracted in 200 components = 0.0660509 Jy
! Clean residual min=-0.009506 max=0.009807 Jy/beam
! Clean residual mean=-0.000052 rms=0.003337 Jy/beam
! Combined flux in latest and established models = 0.0665269 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 105 components and 0.0665269 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.809 mas, bmaj=17.02 mas, bpa=26.63 degrees
! Estimated noise=1.25792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00893666 Jy
! Component: 100  -  total flux cleaned = 0.0138876 Jy
! Component: 150  -  total flux cleaned = 0.0185763 Jy
! Component: 200  -  total flux cleaned = 0.0223872 Jy
! Total flux subtracted in 200 components = 0.0223872 Jy
! Clean residual min=-0.007815 max=0.009226 Jy/beam
! Clean residual mean=-0.000041 rms=0.002911 Jy/beam
! Combined flux in latest and established models = 0.0889141 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00336087 Jy
! Component: 100  -  total flux cleaned = 0.00651386 Jy
! Component: 150  -  total flux cleaned = 0.00902465 Jy
! Component: 200  -  total flux cleaned = 0.0115811 Jy
! Total flux subtracted in 200 components = 0.0115811 Jy
! Clean residual min=-0.006810 max=0.007801 Jy/beam
! Clean residual mean=-0.000028 rms=0.002380 Jy/beam
! Combined flux in latest and established models = 0.100495 Jy
! Adding 170 model components to the UV plane model.
! The established model now contains 266 components and 0.100495 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.811 mas, bmaj=17.63 mas, bpa=27.38 degrees
! Estimated noise=1.16227 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137268 Jy
! Component: 100  -  total flux cleaned = 0.00302545 Jy
! Component: 150  -  total flux cleaned = 0.00483341 Jy
! Component: 200  -  total flux cleaned = 0.00640462 Jy
! Total flux subtracted in 200 components = 0.00640462 Jy
! Clean residual min=-0.005288 max=0.006324 Jy/beam
! Clean residual mean=-0.000014 rms=0.001766 Jy/beam
! Combined flux in latest and established models = 0.1069 Jy
selfcal
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 318 components and 0.1069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056123Jy  sigma=0.432049
! Fit after  self-cal, rms=0.055837Jy  sigma=0.425792
wmodel J1938+664A_S_b_map.mod
! Writing 318 model components to file: J1938+664A_S_b_map.mod
wobs   J1938+664A_S_b_uvs.fits
! Writing UV FITS file: J1938+664A_S_b_uvs.fits
wwins  J1938+664A_S_b_map.win
! wwins: Wrote 2 windows to J1938+664A_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212974 Jy
! Component: 100  -  total flux cleaned = 0.00313397 Jy
! Component: 150  -  total flux cleaned = 0.00375494 Jy
! Component: 200  -  total flux cleaned = 0.00397723 Jy
! Component: 250  -  total flux cleaned = 0.00428153 Jy
! Component: 300  -  total flux cleaned = 0.00447371 Jy
! Component: 350  -  total flux cleaned = 0.0046091 Jy
! Component: 400  -  total flux cleaned = 0.00473567 Jy
! Component: 450  -  total flux cleaned = 0.00481465 Jy
! Component: 500  -  total flux cleaned = 0.00481365 Jy
! Component: 550  -  total flux cleaned = 0.00474365 Jy
! Component: 600  -  total flux cleaned = 0.00477653 Jy
! Component: 650  -  total flux cleaned = 0.00490176 Jy
! Component: 700  -  total flux cleaned = 0.00505111 Jy
! Component: 750  -  total flux cleaned = 0.00519355 Jy
! Component: 800  -  total flux cleaned = 0.00535796 Jy
! Component: 850  -  total flux cleaned = 0.00556691 Jy
! Component: 900  -  total flux cleaned = 0.00564268 Jy
! Component: 950  -  total flux cleaned = 0.00586115 Jy
! Component: 1000  -  total flux cleaned = 0.00600087 Jy
! Component: 1050  -  total flux cleaned = 0.00615808 Jy
! Component: 1100  -  total flux cleaned = 0.00624546 Jy
! Component: 1150  -  total flux cleaned = 0.00641418 Jy
! Component: 1200  -  total flux cleaned = 0.0065565 Jy
! Component: 1250  -  total flux cleaned = 0.00669413 Jy
! Component: 1300  -  total flux cleaned = 0.00684706 Jy
! Component: 1350  -  total flux cleaned = 0.00697695 Jy
! Component: 1400  -  total flux cleaned = 0.00706742 Jy
! Component: 1450  -  total flux cleaned = 0.00712069 Jy
! Component: 1500  -  total flux cleaned = 0.00712076 Jy
! Component: 1550  -  total flux cleaned = 0.00713816 Jy
! Component: 1600  -  total flux cleaned = 0.00717193 Jy
! Component: 1650  -  total flux cleaned = 0.0072546 Jy
! Component: 1700  -  total flux cleaned = 0.00727089 Jy
! Component: 1750  -  total flux cleaned = 0.00731917 Jy
! Component: 1800  -  total flux cleaned = 0.00733518 Jy
! Component: 1850  -  total flux cleaned = 0.00738215 Jy
! Component: 1900  -  total flux cleaned = 0.00738216 Jy
! Component: 1950  -  total flux cleaned = 0.00736682 Jy
! Component: 2000  -  total flux cleaned = 0.00736699 Jy
! Component: 2050  -  total flux cleaned = 0.00742701 Jy
! Component: 2100  -  total flux cleaned = 0.00738211 Jy
! Component: 2150  -  total flux cleaned = 0.00736743 Jy
! Component: 2200  -  total flux cleaned = 0.00741154 Jy
! Component: 2250  -  total flux cleaned = 0.00744074 Jy
! Component: 2300  -  total flux cleaned = 0.00746991 Jy
! Component: 2350  -  total flux cleaned = 0.00755679 Jy
! Component: 2400  -  total flux cleaned = 0.00761462 Jy
! Component: 2450  -  total flux cleaned = 0.00770112 Jy
! Component: 2500  -  total flux cleaned = 0.007773 Jy
! Component: 2550  -  total flux cleaned = 0.0077729 Jy
! Component: 2600  -  total flux cleaned = 0.00783026 Jy
! Component: 2650  -  total flux cleaned = 0.00790197 Jy
! Component: 2700  -  total flux cleaned = 0.00794496 Jy
! Component: 2750  -  total flux cleaned = 0.00801654 Jy
! Component: 2800  -  total flux cleaned = 0.00808832 Jy
! Component: 2850  -  total flux cleaned = 0.00813152 Jy
! Component: 2900  -  total flux cleaned = 0.0082034 Jy
! Component: 2950  -  total flux cleaned = 0.00823214 Jy
! Component: 3000  -  total flux cleaned = 0.00824656 Jy
! Component: 3050  -  total flux cleaned = 0.00823206 Jy
! Component: 3100  -  total flux cleaned = 0.00824663 Jy
! Component: 3150  -  total flux cleaned = 0.0082613 Jy
! Component: 3200  -  total flux cleaned = 0.00830611 Jy
! Component: 3250  -  total flux cleaned = 0.00836681 Jy
! Component: 3300  -  total flux cleaned = 0.00842844 Jy
! Component: 3350  -  total flux cleaned = 0.00850705 Jy
! Component: 3400  -  total flux cleaned = 0.00853895 Jy
! Component: 3450  -  total flux cleaned = 0.00858717 Jy
! Component: 3500  -  total flux cleaned = 0.00865267 Jy
! Component: 3550  -  total flux cleaned = 0.00871946 Jy
! Component: 3600  -  total flux cleaned = 0.00880412 Jy
! Component: 3650  -  total flux cleaned = 0.00887334 Jy
! Component: 3700  -  total flux cleaned = 0.00890845 Jy
! Component: 3750  -  total flux cleaned = 0.00899783 Jy
! Component: 3800  -  total flux cleaned = 0.00907041 Jy
! Component: 3850  -  total flux cleaned = 0.00916313 Jy
! Component: 3900  -  total flux cleaned = 0.00921968 Jy
! Component: 3950  -  total flux cleaned = 0.00927697 Jy
! Component: 4000  -  total flux cleaned = 0.0093744 Jy
! Component: 4050  -  total flux cleaned = 0.0094338 Jy
! Total flux subtracted in 4096 components = 0.00955484 Jy
! Clean residual min=-0.001283 max=0.001322 Jy/beam
! Clean residual mean=0.000017 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.116455 Jy
keep
! Adding 356 model components to the UV plane model.
! The established model now contains 674 components and 0.116455 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1938+664A_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.811 x 17.63 at 27.38 degrees (North through East)
! Clean map  min=-0.0033304  max=0.038129 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1938+664A_S_b_map.fits
wmodel /image_prod/ug002_uva//J1938+664A_S_b_map.mod
! Writing 674 model components to file: /image_prod/ug002_uva//J1938+664A_S_b_map.mod
wobs   /image_prod/ug002_uva//J1938+664A_S_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1938+664A_S_b_uvs.fits
wwins  /image_prod/ug002_uva//J1938+664A_S_b_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1938+664A_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0381287 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000324979 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.55696 2.55696 5.11393 10.2279 20.4557 40.9114 81.8228
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.038 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  117.326 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1938+664A_S_b_dfm.log closed on Thu Mar  5 04:19:08 2020