! Started logfile: /image_prod/ug002_uva//J1938+0942_X_dfm.log on Thu Mar 5 04:18:25 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1938+0942_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1938+0942_X_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.99763 visibilities/baseline/integration-bin. ! Found source: J1938+0942 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 40404 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1938+0942_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.003036Jy sigma=10.050724 ! Fit after self-cal, rms=0.962565Jy sigma=9.637749 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6903 mas, bmaj=1.73 mas, bpa=-5.038 degrees ! Estimated noise=0.711626 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0282695 Jy ! Component: 100 - total flux cleaned = 0.0357921 Jy ! Total flux subtracted in 100 components = 0.0357921 Jy ! Clean residual min=-0.003481 max=0.010546 Jy/beam ! Clean residual mean=0.000002 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.0357921 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0357921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061855Jy sigma=0.593064 ! Fit after self-cal, rms=0.060138Jy sigma=0.575782 ! Inverting map ! Added new window around map position (6, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104981 Jy ! Component: 100 - total flux cleaned = 0.0158766 Jy ! Total flux subtracted in 100 components = 0.0158766 Jy ! Clean residual min=-0.003507 max=0.005135 Jy/beam ! Clean residual mean=0.000001 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.0516687 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.0516687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057671Jy sigma=0.547602 ! Fit after self-cal, rms=0.057080Jy sigma=0.541951 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00629604 Jy ! Component: 100 - total flux cleaned = 0.0100667 Jy ! Total flux subtracted in 100 components = 0.0100667 Jy ! Clean residual min=-0.002984 max=0.005444 Jy/beam ! Clean residual mean=-0.000000 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0617353 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 0.0617353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055938Jy sigma=0.528700 ! Fit after self-cal, rms=0.055788Jy sigma=0.527095 ! Inverting map ! Added new window around map position (7.4, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00512719 Jy ! Component: 100 - total flux cleaned = 0.0080633 Jy ! Total flux subtracted in 100 components = 0.0080633 Jy ! Clean residual min=-0.002559 max=0.004930 Jy/beam ! Clean residual mean=-0.000000 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0697986 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.0697986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055078Jy sigma=0.519393 ! Fit after self-cal, rms=0.055010Jy sigma=0.518481 ! Inverting map ! Added new window around map position (18.8, -5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00482682 Jy ! Component: 100 - total flux cleaned = 0.00798753 Jy ! Total flux subtracted in 100 components = 0.00798753 Jy ! Clean residual min=-0.002363 max=0.004299 Jy/beam ! Clean residual mean=0.000000 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.0777862 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 45 components and 0.0777862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054185Jy sigma=0.508442 ! Fit after self-cal, rms=0.054107Jy sigma=0.507684 ! Inverting map ! Added new window around map position (20.4, -4.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419361 Jy ! Component: 100 - total flux cleaned = 0.0071237 Jy ! Total flux subtracted in 100 components = 0.0071237 Jy ! Clean residual min=-0.002149 max=0.002784 Jy/beam ! Clean residual mean=0.000000 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0849099 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.0849099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053467Jy sigma=0.500036 ! Fit after self-cal, rms=0.053415Jy sigma=0.499502 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9035 mas, bmaj=2.03 mas, bpa=-4.957 degrees ! Estimated noise=0.357404 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00635738 Jy ! Component: 100 - total flux cleaned = 0.0110977 Jy ! Component: 150 - total flux cleaned = 0.0150506 Jy ! Component: 200 - total flux cleaned = 0.018442 Jy ! Total flux subtracted in 200 components = 0.018442 Jy ! Clean residual min=-0.002824 max=0.004760 Jy/beam ! Clean residual mean=0.000002 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.103352 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 108 components and 0.103352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052342Jy sigma=0.486870 ! Fit after self-cal, rms=0.052251Jy sigma=0.485756 ! Inverting map ! Added new window around map position (2.8, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00498218 Jy ! Component: 100 - total flux cleaned = 0.00865188 Jy ! Component: 150 - total flux cleaned = 0.0118218 Jy ! Component: 200 - total flux cleaned = 0.0146005 Jy ! Total flux subtracted in 200 components = 0.0146005 Jy ! Clean residual min=-0.002084 max=0.003877 Jy/beam ! Clean residual mean=0.000002 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.117952 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 154 components and 0.117952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051556Jy sigma=0.477777 ! Fit after self-cal, rms=0.051507Jy sigma=0.477261 ! Inverting map ! Added new window around map position (16.6, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400394 Jy ! Component: 100 - total flux cleaned = 0.00681963 Jy ! Component: 150 - total flux cleaned = 0.00924068 Jy ! Component: 200 - total flux cleaned = 0.0114064 Jy ! Total flux subtracted in 200 components = 0.0114064 Jy ! Clean residual min=-0.001645 max=0.002046 Jy/beam ! Clean residual mean=0.000002 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.129359 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 210 components and 0.129359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051071Jy sigma=0.472294 ! Fit after self-cal, rms=0.051046Jy sigma=0.471953 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9035 x 2.03 at -4.957 degrees (North through East) ! Clean map min=-0.0015233 max=0.040693 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.05 KP 0.98 ! LA 0.93 MK 1.09 NL 1.06 OV 0.94 ! PT 0.86 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.99 KP 0.98 ! LA 0.92 MK 1.04 NL 1.12 OV 0.94 ! PT 0.85 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.03 KP 1.01 ! LA 0.96 MK 1.04 NL 1.09 OV 0.96 ! PT 0.84 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.07 KP 0.99 ! LA 0.93 MK 1.05 NL 1.13 OV 0.91 ! PT 0.85 SC 1.04 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.06 KP 1.02 ! LA 0.90 MK 1.03 NL 1.11 OV 0.96 ! PT 0.87 SC 1.08 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.96 HN 1.00 KP 1.02 ! LA 0.94 MK 1.09 NL 1.10 OV 0.87 ! PT 0.84 SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 1.07 KP 0.99 ! LA 0.93 MK 1.06 NL 1.11 OV 0.97 ! PT 0.86 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 1.00 KP 0.99 ! LA 0.96 MK 1.01 NL 1.06 OV 0.95 ! PT 0.85 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.98 KP 0.98 ! LA 0.93 MK 1.03 NL 1.09 OV 0.96 ! PT 0.86 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 0.93 KP 0.97 ! LA 0.97 MK 1.14 NL 1.06 OV 1.00 ! PT 0.85 SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 1.00 KP 1.04 ! LA 0.95 MK 1.01 NL 1.16 OV 0.95 ! PT 0.85 SC 0.95 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 0.97 KP 1.05 ! LA 0.91 MK 0.98 NL 1.07 OV 0.97 ! PT 0.85 SC 1.03 ! ! ! Fit before self-cal, rms=0.051046Jy sigma=0.471953 ! Fit after self-cal, rms=0.050151Jy sigma=0.467816 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9238 mas, bmaj=2.073 mas, bpa=-4.746 degrees ! Estimated noise=0.349531 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165985 Jy ! Component: 100 - total flux cleaned = 0.00251419 Jy ! Component: 150 - total flux cleaned = 0.00321774 Jy ! Component: 200 - total flux cleaned = 0.00379345 Jy ! Total flux subtracted in 200 components = 0.00379345 Jy ! Clean residual min=-0.000871 max=0.000996 Jy/beam ! Clean residual mean=-0.000000 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.133152 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 249 components and 0.133152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050077Jy sigma=0.466892 ! Fit after self-cal, rms=0.050101Jy sigma=0.466692 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050101Jy sigma=0.466692 ! Fit after self-cal, rms=0.050280Jy sigma=0.465980 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9223 mas, bmaj=2.069 mas, bpa=-4.891 degrees ! Estimated noise=0.349447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000841807 Jy ! Component: 100 - total flux cleaned = 0.00135633 Jy ! Component: 150 - total flux cleaned = 0.00175552 Jy ! Component: 200 - total flux cleaned = 0.00210827 Jy ! Total flux subtracted in 200 components = 0.00210827 Jy ! Clean residual min=-0.000768 max=0.000760 Jy/beam ! Clean residual mean=-0.000001 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.135261 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 270 components and 0.13526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050255Jy sigma=0.465674 ! Fit after self-cal, rms=0.050260Jy sigma=0.465633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00034443 Jy ! Component: 100 - total flux cleaned = 0.000640952 Jy ! Component: 150 - total flux cleaned = 0.000872205 Jy ! Component: 200 - total flux cleaned = 0.00106856 Jy ! Total flux subtracted in 200 components = 0.00106856 Jy ! Clean residual min=-0.000740 max=0.000740 Jy/beam ! Clean residual mean=-0.000001 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.136329 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 281 components and 0.136329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050248Jy sigma=0.465490 ! Fit after self-cal, rms=0.050247Jy sigma=0.465484 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050247Jy sigma=0.465484 ! Fit after self-cal, rms=0.050249Jy sigma=0.465390 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.921 mas, bmaj=2.068 mas, bpa=-4.962 degrees ! Estimated noise=0.348612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000437752 Jy ! Component: 100 - total flux cleaned = 0.000744839 Jy ! Component: 150 - total flux cleaned = 0.000988131 Jy ! Component: 200 - total flux cleaned = 0.00112899 Jy ! Total flux subtracted in 200 components = 0.00112899 Jy ! Clean residual min=-0.000692 max=0.000700 Jy/beam ! Clean residual mean=-0.000000 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.137458 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 294 components and 0.137458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050240Jy sigma=0.465287 ! Fit after self-cal, rms=0.050243Jy sigma=0.465278 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000197992 Jy ! Component: 100 - total flux cleaned = 0.000301893 Jy ! Component: 150 - total flux cleaned = 0.000363841 Jy ! Component: 200 - total flux cleaned = 0.000446318 Jy ! Total flux subtracted in 200 components = 0.000446318 Jy ! Clean residual min=-0.000685 max=0.000680 Jy/beam ! Clean residual mean=-0.000000 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.137904 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 302 components and 0.137904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050237Jy sigma=0.465218 ! Fit after self-cal, rms=0.050237Jy sigma=0.465217 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050237Jy sigma=0.465217 ! Fit after self-cal, rms=0.050145Jy sigma=0.465204 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.223 mas, bmaj=3.122 mas, bpa=-0.3973 degrees ! Estimated noise=0.413727 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000640351 Jy ! Component: 100 - total flux cleaned = 0.00109832 Jy ! Component: 150 - total flux cleaned = 0.0014748 Jy ! Component: 200 - total flux cleaned = 0.00165731 Jy ! Total flux subtracted in 200 components = 0.00165731 Jy ! Clean residual min=-0.000902 max=0.000864 Jy/beam ! Clean residual mean=-0.000001 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.139562 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 312 components and 0.139562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050143Jy sigma=0.465150 ! Fit after self-cal, rms=0.050143Jy sigma=0.465140 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000197954 Jy ! Component: 100 - total flux cleaned = 0.000314493 Jy ! Component: 150 - total flux cleaned = 0.000407863 Jy ! Component: 200 - total flux cleaned = 0.000474141 Jy ! Total flux subtracted in 200 components = 0.000474141 Jy ! Clean residual min=-0.000869 max=0.000812 Jy/beam ! Clean residual mean=-0.000001 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.140036 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 317 components and 0.140036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050143Jy sigma=0.465126 ! Fit after self-cal, rms=0.050142Jy sigma=0.465122 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9201 mas, bmaj=2.067 mas, bpa=-4.989 degrees ! Estimated noise=0.348025 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9201 x 2.067 at -4.989 degrees (North through East) ! Clean map min=-0.00061491 max=0.039567 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.698 mas, bmaj=1.748 mas, bpa=-5.135 degrees ! Estimated noise=0.704878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0306534 Jy ! Component: 100 - total flux cleaned = 0.0446982 Jy ! Component: 150 - total flux cleaned = 0.0536174 Jy ! Component: 200 - total flux cleaned = 0.0606269 Jy ! Total flux subtracted in 200 components = 0.0606269 Jy ! Clean residual min=-0.002544 max=0.004215 Jy/beam ! Clean residual mean=0.000001 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.0606269 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0606269 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9201 mas, bmaj=2.067 mas, bpa=-4.989 degrees ! Estimated noise=0.348025 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105014 Jy ! Component: 100 - total flux cleaned = 0.0182807 Jy ! Component: 150 - total flux cleaned = 0.0248007 Jy ! Component: 200 - total flux cleaned = 0.0304176 Jy ! Total flux subtracted in 200 components = 0.0304176 Jy ! Clean residual min=-0.002630 max=0.003824 Jy/beam ! Clean residual mean=0.000002 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.0910445 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 71 components and 0.0910445 Jy ! Inverting map ! Added new window around map position (1, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00491301 Jy ! Component: 100 - total flux cleaned = 0.00917191 Jy ! Component: 150 - total flux cleaned = 0.0129169 Jy ! Component: 200 - total flux cleaned = 0.0162342 Jy ! Total flux subtracted in 200 components = 0.0162342 Jy ! Clean residual min=-0.001814 max=0.002237 Jy/beam ! Clean residual mean=0.000001 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.107279 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 120 components and 0.107279 Jy ! Inverting map ! Added new window around map position (15, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297847 Jy ! Component: 100 - total flux cleaned = 0.00564316 Jy ! Component: 150 - total flux cleaned = 0.00804062 Jy ! Component: 200 - total flux cleaned = 0.0102002 Jy ! Total flux subtracted in 200 components = 0.0102002 Jy ! Clean residual min=-0.001375 max=0.001641 Jy/beam ! Clean residual mean=0.000001 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.117479 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 159 components and 0.117479 Jy ! Inverting map ! Added new window around map position (4.8, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200318 Jy ! Component: 100 - total flux cleaned = 0.00378095 Jy ! Component: 150 - total flux cleaned = 0.00538994 Jy ! Component: 200 - total flux cleaned = 0.00685274 Jy ! Total flux subtracted in 200 components = 0.00685274 Jy ! Clean residual min=-0.001137 max=0.001207 Jy/beam ! Clean residual mean=0.000000 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.124332 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 201 components and 0.124332 Jy ! Inverting map ! Added new window around map position (25.2, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139643 Jy ! Component: 100 - total flux cleaned = 0.00261538 Jy ! Component: 150 - total flux cleaned = 0.0037258 Jy ! Component: 200 - total flux cleaned = 0.0047406 Jy ! Total flux subtracted in 200 components = 0.0047406 Jy ! Clean residual min=-0.000967 max=0.000936 Jy/beam ! Clean residual mean=0.000000 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.129072 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 229 components and 0.129072 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.223 mas, bmaj=3.122 mas, bpa=-0.3973 degrees ! Estimated noise=0.413727 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169552 Jy ! Component: 100 - total flux cleaned = 0.00304124 Jy ! Component: 150 - total flux cleaned = 0.00416692 Jy ! Component: 200 - total flux cleaned = 0.00512164 Jy ! Total flux subtracted in 200 components = 0.00512164 Jy ! Clean residual min=-0.001217 max=0.000965 Jy/beam ! Clean residual mean=0.000000 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.134194 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000820355 Jy ! Component: 100 - total flux cleaned = 0.00153452 Jy ! Component: 150 - total flux cleaned = 0.00216285 Jy ! Component: 200 - total flux cleaned = 0.00271717 Jy ! Total flux subtracted in 200 components = 0.00271717 Jy ! Clean residual min=-0.001032 max=0.000836 Jy/beam ! Clean residual mean=-0.000000 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.136911 Jy ! Adding 126 model components to the UV plane model. ! The established model now contains 332 components and 0.136911 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9201 mas, bmaj=2.067 mas, bpa=-4.989 degrees ! Estimated noise=0.348025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000270561 Jy ! Component: 100 - total flux cleaned = 0.0006046 Jy ! Component: 150 - total flux cleaned = 0.000812182 Jy ! Component: 200 - total flux cleaned = 0.000959349 Jy ! Total flux subtracted in 200 components = 0.000959349 Jy ! Clean residual min=-0.000671 max=0.000646 Jy/beam ! Clean residual mean=-0.000000 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.13787 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 357 components and 0.13787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050135Jy sigma=0.465067 ! Fit after self-cal, rms=0.050121Jy sigma=0.464998 wmodel J1938+0942_X_map.mod ! Writing 357 model components to file: J1938+0942_X_map.mod wobs J1938+0942_X_uvs.fits ! Writing UV FITS file: J1938+0942_X_uvs.fits wwins J1938+0942_X_map.win ! wwins: Wrote 12 windows to J1938+0942_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000306022 Jy ! Component: 100 - total flux cleaned = -0.000512072 Jy ! Component: 150 - total flux cleaned = -0.000677715 Jy ! Component: 200 - total flux cleaned = -0.000806188 Jy ! Component: 250 - total flux cleaned = -0.000921166 Jy ! Component: 300 - total flux cleaned = -0.00106445 Jy ! Component: 350 - total flux cleaned = -0.00119491 Jy ! Component: 400 - total flux cleaned = -0.00132272 Jy ! Component: 450 - total flux cleaned = -0.00139996 Jy ! Component: 500 - total flux cleaned = -0.00146666 Jy ! Component: 550 - total flux cleaned = -0.00151367 Jy ! Component: 600 - total flux cleaned = -0.00159683 Jy ! Component: 650 - total flux cleaned = -0.00164216 Jy ! Component: 700 - total flux cleaned = -0.00168704 Jy ! Component: 750 - total flux cleaned = -0.0017226 Jy ! Component: 800 - total flux cleaned = -0.00179273 Jy ! Component: 850 - total flux cleaned = -0.00185316 Jy ! Component: 900 - total flux cleaned = -0.00190431 Jy ! Component: 950 - total flux cleaned = -0.00193807 Jy ! Component: 1000 - total flux cleaned = -0.00201301 Jy ! Component: 1050 - total flux cleaned = -0.00203768 Jy ! Component: 1100 - total flux cleaned = -0.0020621 Jy ! Component: 1150 - total flux cleaned = -0.00209442 Jy ! Component: 1200 - total flux cleaned = -0.00211046 Jy ! Component: 1250 - total flux cleaned = -0.00215805 Jy ! Component: 1300 - total flux cleaned = -0.00217385 Jy ! Component: 1350 - total flux cleaned = -0.00222052 Jy ! Component: 1400 - total flux cleaned = -0.00222052 Jy ! Component: 1450 - total flux cleaned = -0.00222048 Jy ! Component: 1500 - total flux cleaned = -0.00228116 Jy ! Component: 1550 - total flux cleaned = -0.00227363 Jy ! Component: 1600 - total flux cleaned = -0.00231089 Jy ! Component: 1650 - total flux cleaned = -0.00231078 Jy ! Component: 1700 - total flux cleaned = -0.00233283 Jy ! Component: 1750 - total flux cleaned = -0.00234744 Jy ! Component: 1800 - total flux cleaned = -0.00234748 Jy ! Component: 1850 - total flux cleaned = -0.00236908 Jy ! Component: 1900 - total flux cleaned = -0.00236905 Jy ! Component: 1950 - total flux cleaned = -0.00237618 Jy ! Component: 2000 - total flux cleaned = -0.00240428 Jy ! Component: 2050 - total flux cleaned = -0.00239038 Jy ! Component: 2100 - total flux cleaned = -0.00239728 Jy ! Component: 2150 - total flux cleaned = -0.00236971 Jy ! Component: 2200 - total flux cleaned = -0.00234925 Jy ! Component: 2250 - total flux cleaned = -0.00235607 Jy ! Component: 2300 - total flux cleaned = -0.00234934 Jy ! Component: 2350 - total flux cleaned = -0.00232929 Jy ! Component: 2400 - total flux cleaned = -0.00233594 Jy ! Component: 2450 - total flux cleaned = -0.00230282 Jy ! Component: 2500 - total flux cleaned = -0.00228963 Jy ! Component: 2550 - total flux cleaned = -0.00230924 Jy ! Component: 2600 - total flux cleaned = -0.00228971 Jy ! Component: 2650 - total flux cleaned = -0.0022768 Jy ! Component: 2700 - total flux cleaned = -0.00227679 Jy ! Component: 2750 - total flux cleaned = -0.00226397 Jy ! Component: 2800 - total flux cleaned = -0.00223856 Jy ! Component: 2850 - total flux cleaned = -0.00223224 Jy ! Component: 2900 - total flux cleaned = -0.00222597 Jy ! Component: 2950 - total flux cleaned = -0.00220726 Jy ! Component: 3000 - total flux cleaned = -0.00221346 Jy ! Component: 3050 - total flux cleaned = -0.00219493 Jy ! Component: 3100 - total flux cleaned = -0.0021766 Jy ! Component: 3150 - total flux cleaned = -0.00220097 Jy ! Component: 3200 - total flux cleaned = -0.00218272 Jy ! Component: 3250 - total flux cleaned = -0.00217671 Jy ! Component: 3300 - total flux cleaned = -0.00215866 Jy ! Component: 3350 - total flux cleaned = -0.0021408 Jy ! Component: 3400 - total flux cleaned = -0.0021171 Jy ! Component: 3450 - total flux cleaned = -0.00211708 Jy ! Component: 3500 - total flux cleaned = -0.00209363 Jy ! Component: 3550 - total flux cleaned = -0.00207032 Jy ! Component: 3600 - total flux cleaned = -0.00208191 Jy ! Component: 3650 - total flux cleaned = -0.00206462 Jy ! Component: 3700 - total flux cleaned = -0.00205313 Jy ! Component: 3750 - total flux cleaned = -0.00202454 Jy ! Component: 3800 - total flux cleaned = -0.00204726 Jy ! Component: 3850 - total flux cleaned = -0.00203033 Jy ! Component: 3900 - total flux cleaned = -0.00205283 Jy ! Component: 3950 - total flux cleaned = -0.0020248 Jy ! Component: 4000 - total flux cleaned = -0.00202481 Jy ! Component: 4050 - total flux cleaned = -0.00200817 Jy ! Total flux subtracted in 4096 components = -0.00198056 Jy ! Clean residual min=-0.000329 max=0.000350 Jy/beam ! Clean residual mean=-0.000000 rms=0.000098 Jy/beam ! Combined flux in latest and established models = 0.13589 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 689 components and 0.13589 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1938+0942_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9201 x 2.067 at -4.989 degrees (North through East) ! Clean map min=-0.00051564 max=0.039523 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1938+0942_X_map.fits wmodel /image_prod/ug002_uva//J1938+0942_X_map.mod ! Writing 689 model components to file: /image_prod/ug002_uva//J1938+0942_X_map.mod wobs /image_prod/ug002_uva//J1938+0942_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1938+0942_X_uvs.fits wwins /image_prod/ug002_uva//J1938+0942_X_map.win ! wwins: Wrote 13 windows to /image_prod/ug002_uva//J1938+0942_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0395232 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.80073e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.743922 0.743922 1.48784 2.97569 5.95138 11.9028 23.8055 47.611 95.2221 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.039 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 403.267 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1938+0942_X_dfm.log closed on Thu Mar 5 04:18:32 2020