! Started logfile: /image_prod/ug002_uva//J1929+0910_X_dfm.log on Thu Mar  5 04:12:24 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1929+0910_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1929+0910_X_uva.fits
! AN table 1: 75 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.930074 visibilities/baseline/integration-bin.
! Found source: J1929+0910
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 37668 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1929+0910_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002940Jy  sigma=10.036429
! Fit after  self-cal, rms=0.946397Jy  sigma=9.452337
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7165 mas, bmaj=1.999 mas, bpa=-10.79 degrees
! Estimated noise=0.728671 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0405033 Jy
! Component: 100  -  total flux cleaned = 0.0525302 Jy
! Total flux subtracted in 100 components = 0.0525302 Jy
! Clean residual min=-0.002585 max=0.005008 Jy/beam
! Clean residual mean=0.000001 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.0525302 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0525302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051915Jy  sigma=0.476957
! Fit after  self-cal, rms=0.051249Jy  sigma=0.470376
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00591444 Jy
! Component: 100  -  total flux cleaned = 0.00883234 Jy
! Total flux subtracted in 100 components = 0.00883234 Jy
! Clean residual min=-0.002225 max=0.002892 Jy/beam
! Clean residual mean=0.000000 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.0613625 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.0613625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050555Jy  sigma=0.461954
! Fit after  self-cal, rms=0.050552Jy  sigma=0.461740
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9511 mas, bmaj=2.312 mas, bpa=-10.92 degrees
! Estimated noise=0.371073 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00263145 Jy
! Component: 100  -  total flux cleaned = 0.00429199 Jy
! Component: 150  -  total flux cleaned = 0.0054793 Jy
! Component: 200  -  total flux cleaned = 0.00638831 Jy
! Total flux subtracted in 200 components = 0.00638831 Jy
! Clean residual min=-0.001451 max=0.002156 Jy/beam
! Clean residual mean=0.000001 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.0677508 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 35 components and 0.0677508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050397Jy  sigma=0.459977
! Fit after  self-cal, rms=0.050387Jy  sigma=0.459798
! Inverting map 
! Added new window around map position (1.8, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119083 Jy
! Component: 100  -  total flux cleaned = 0.00190782 Jy
! Component: 150  -  total flux cleaned = 0.00240966 Jy
! Component: 200  -  total flux cleaned = 0.00277394 Jy
! Total flux subtracted in 200 components = 0.00277394 Jy
! Clean residual min=-0.001309 max=0.001288 Jy/beam
! Clean residual mean=0.000001 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.0705248 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 53 components and 0.0705248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050311Jy  sigma=0.459067
! Fit after  self-cal, rms=0.050304Jy  sigma=0.459003
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9511 x 2.312 at -10.92 degrees (North through East)
! Clean map  min=-0.0012695  max=0.054569 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.03     KP        1.04     
!   LA        1.02     MK        1.07     NL        1.04     OV        0.92     
!   PT        0.90     SC        1.20     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.08     HN        1.02     KP        1.01     
!   LA        0.98     MK        1.01     NL        1.07     OV        0.95     
!   PT        0.90     SC        1.10     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.01     KP        1.06     
!   LA        1.02     MK        0.99     NL        1.08     OV        0.94     
!   PT        0.91     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.00     KP        1.03     
!   LA        1.01     MK        1.02     NL        1.07     OV        0.97     
!   PT        0.92     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        1.00     KP        1.03     
!   LA        0.99     MK        0.98     NL        1.10     OV        0.95     
!   PT        0.95     SC        1.10     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        0.97     KP        1.02     
!   LA        0.97     MK        1.02     NL        1.08     OV        0.90     
!   PT        0.92     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.04     KP        0.99     
!   LA        1.01     MK        1.00     NL        1.05     OV        0.96     
!   PT        0.95     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.95     KP        1.04     
!   LA        1.01     MK        0.98     NL        1.08     OV        0.94     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.05     HN        0.93     KP        1.02     
!   LA        0.98     MK        1.09     NL        1.09     OV        0.97     
!   PT        0.91     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.97     KP        1.03     
!   LA        1.00     MK        1.01     NL        1.01     OV        0.96     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.05     HN        0.96     KP        1.03     
!   LA        0.99     MK        1.01     NL        1.02     OV        0.95     
!   PT        0.96     SC        0.92     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.98     KP        1.01     
!   LA        1.06     MK        0.96     NL        1.07     OV        0.97     
!   PT        0.91     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.050304Jy  sigma=0.459003
! Fit after  self-cal, rms=0.050027Jy  sigma=0.457377
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9553 mas, bmaj=2.323 mas, bpa=-10.91 degrees
! Estimated noise=0.371314 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000225746 Jy
! Component: 100  -  total flux cleaned = 6.94087e-05 Jy
! Component: 150  -  total flux cleaned = 1.29984e-06 Jy
! Component: 200  -  total flux cleaned = -3.81628e-05 Jy
! Total flux subtracted in 200 components = -3.81628e-05 Jy
! Clean residual min=-0.000968 max=0.000869 Jy/beam
! Clean residual mean=0.000000 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.0704866 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 78 components and 0.0704866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050002Jy  sigma=0.457133
! Fit after  self-cal, rms=0.050006Jy  sigma=0.457046
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050006Jy  sigma=0.457046
! Fit after  self-cal, rms=0.050657Jy  sigma=0.456072
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9544 mas, bmaj=2.319 mas, bpa=-10.84 degrees
! Estimated noise=0.371459 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000194872 Jy
! Component: 100  -  total flux cleaned = 0.000247077 Jy
! Component: 150  -  total flux cleaned = 0.000231238 Jy
! Component: 200  -  total flux cleaned = 0.000243569 Jy
! Total flux subtracted in 200 components = 0.000243569 Jy
! Clean residual min=-0.000867 max=0.000798 Jy/beam
! Clean residual mean=0.000000 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.0707302 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 91 components and 0.0707302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050646Jy  sigma=0.455960
! Fit after  self-cal, rms=0.050659Jy  sigma=0.455928
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.37785e-05 Jy
! Component: 100  -  total flux cleaned = 1.89802e-05 Jy
! Component: 150  -  total flux cleaned = 8.05483e-06 Jy
! Component: 200  -  total flux cleaned = 8.21616e-06 Jy
! Total flux subtracted in 200 components = 8.21616e-06 Jy
! Clean residual min=-0.000851 max=0.000785 Jy/beam
! Clean residual mean=0.000000 rms=0.000177 Jy/beam
! Combined flux in latest and established models = 0.0707384 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 103 components and 0.0707384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050653Jy  sigma=0.455885
! Fit after  self-cal, rms=0.050652Jy  sigma=0.455883
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.050652Jy  sigma=0.455883
! Fit after  self-cal, rms=0.051404Jy  sigma=0.455748
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9545 mas, bmaj=2.316 mas, bpa=-10.74 degrees
! Estimated noise=0.37122 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000143383 Jy
! Component: 100  -  total flux cleaned = 0.000209722 Jy
! Component: 150  -  total flux cleaned = 0.000232501 Jy
! Component: 200  -  total flux cleaned = 0.000253016 Jy
! Total flux subtracted in 200 components = 0.000253016 Jy
! Clean residual min=-0.000742 max=0.000766 Jy/beam
! Clean residual mean=0.000000 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.0709914 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 112 components and 0.0709914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051398Jy  sigma=0.455684
! Fit after  self-cal, rms=0.051406Jy  sigma=0.455677
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, -7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000548059 Jy
! Component: 100  -  total flux cleaned = 0.000629622 Jy
! Component: 150  -  total flux cleaned = 0.000721112 Jy
! Component: 200  -  total flux cleaned = 0.0007831 Jy
! Total flux subtracted in 200 components = 0.0007831 Jy
! Clean residual min=-0.000690 max=0.000668 Jy/beam
! Clean residual mean=0.000000 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.0717745 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 131 components and 0.0717745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051395Jy  sigma=0.455578
! Fit after  self-cal, rms=0.051394Jy  sigma=0.455570
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051394Jy  sigma=0.455570
! Fit after  self-cal, rms=0.051493Jy  sigma=0.455558
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.226 mas, bmaj=3.162 mas, bpa=-1.517 degrees
! Estimated noise=0.437889 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000191388 Jy
! Component: 100  -  total flux cleaned = 0.000236698 Jy
! Component: 150  -  total flux cleaned = 0.000271592 Jy
! Component: 200  -  total flux cleaned = 0.000279101 Jy
! Total flux subtracted in 200 components = 0.000279101 Jy
! Clean residual min=-0.000691 max=0.000729 Jy/beam
! Clean residual mean=0.000000 rms=0.000179 Jy/beam
! Combined flux in latest and established models = 0.0720536 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 153 components and 0.0720536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051493Jy  sigma=0.455532
! Fit after  self-cal, rms=0.051495Jy  sigma=0.455528
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.52093e-05 Jy
! Component: 100  -  total flux cleaned = 9.56244e-06 Jy
! Component: 150  -  total flux cleaned = 9.67556e-06 Jy
! Component: 200  -  total flux cleaned = 1.45308e-05 Jy
! Total flux subtracted in 200 components = 1.45308e-05 Jy
! Clean residual min=-0.000675 max=0.000715 Jy/beam
! Clean residual mean=0.000000 rms=0.000177 Jy/beam
! Combined flux in latest and established models = 0.0720682 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 158 components and 0.0720682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051494Jy  sigma=0.455523
! Fit after  self-cal, rms=0.051493Jy  sigma=0.455522
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9549 mas, bmaj=2.316 mas, bpa=-10.71 degrees
! Estimated noise=0.370682 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9549 x 2.316 at -10.71 degrees (North through East)
! Clean map  min=-0.00061523  max=0.054641 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7162 mas, bmaj=1.994 mas, bpa=-10.58 degrees
! Estimated noise=0.73113 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0408666 Jy
! Component: 100  -  total flux cleaned = 0.0536464 Jy
! Component: 150  -  total flux cleaned = 0.0592855 Jy
! Component: 200  -  total flux cleaned = 0.0625002 Jy
! Total flux subtracted in 200 components = 0.0625002 Jy
! Clean residual min=-0.001882 max=0.002037 Jy/beam
! Clean residual mean=0.000001 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.0625002 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0625002 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9549 mas, bmaj=2.316 mas, bpa=-10.71 degrees
! Estimated noise=0.370682 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00255882 Jy
! Component: 100  -  total flux cleaned = 0.00414477 Jy
! Component: 150  -  total flux cleaned = 0.00530393 Jy
! Component: 200  -  total flux cleaned = 0.00623316 Jy
! Total flux subtracted in 200 components = 0.00623316 Jy
! Clean residual min=-0.000834 max=0.000743 Jy/beam
! Clean residual mean=0.000001 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.0687334 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 34 components and 0.0687334 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.226 mas, bmaj=3.162 mas, bpa=-1.517 degrees
! Estimated noise=0.437889 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000964269 Jy
! Component: 100  -  total flux cleaned = 0.00162589 Jy
! Component: 150  -  total flux cleaned = 0.00213991 Jy
! Component: 200  -  total flux cleaned = 0.0023957 Jy
! Total flux subtracted in 200 components = 0.0023957 Jy
! Clean residual min=-0.000772 max=0.000756 Jy/beam
! Clean residual mean=0.000001 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.0711291 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000103545 Jy
! Component: 100  -  total flux cleaned = 0.00020972 Jy
! Component: 150  -  total flux cleaned = 0.000315471 Jy
! Component: 200  -  total flux cleaned = 0.000388903 Jy
! Total flux subtracted in 200 components = 0.000388903 Jy
! Clean residual min=-0.000717 max=0.000722 Jy/beam
! Clean residual mean=0.000001 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.071518 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 86 components and 0.071518 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9549 mas, bmaj=2.316 mas, bpa=-10.71 degrees
! Estimated noise=0.370682 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000132347 Jy
! Component: 100  -  total flux cleaned = 0.000190792 Jy
! Component: 150  -  total flux cleaned = 0.000225967 Jy
! Component: 200  -  total flux cleaned = 0.000242575 Jy
! Total flux subtracted in 200 components = 0.000242575 Jy
! Clean residual min=-0.000653 max=0.000705 Jy/beam
! Clean residual mean=0.000000 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.0717606 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 103 components and 0.0717606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.051513Jy  sigma=0.455642
! Fit after  self-cal, rms=0.051505Jy  sigma=0.455625
wmodel J1929+0910_X_map.mod
! Writing 103 model components to file: J1929+0910_X_map.mod
wobs   J1929+0910_X_uvs.fits
! Writing UV FITS file: J1929+0910_X_uvs.fits
wwins  J1929+0910_X_map.win
! wwins: Wrote 4 windows to J1929+0910_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 8.72735e-05 Jy
! Component: 100  -  total flux cleaned = 0.000145766 Jy
! Component: 150  -  total flux cleaned = 0.000211841 Jy
! Component: 200  -  total flux cleaned = 0.000329063 Jy
! Component: 250  -  total flux cleaned = 0.000411773 Jy
! Component: 300  -  total flux cleaned = 0.000492619 Jy
! Component: 350  -  total flux cleaned = 0.000552151 Jy
! Component: 400  -  total flux cleaned = 0.00061047 Jy
! Component: 450  -  total flux cleaned = 0.000629676 Jy
! Component: 500  -  total flux cleaned = 0.000667329 Jy
! Component: 550  -  total flux cleaned = 0.000667308 Jy
! Component: 600  -  total flux cleaned = 0.000667153 Jy
! Component: 650  -  total flux cleaned = 0.000676179 Jy
! Component: 700  -  total flux cleaned = 0.000667241 Jy
! Component: 750  -  total flux cleaned = 0.000711575 Jy
! Component: 800  -  total flux cleaned = 0.000702863 Jy
! Component: 850  -  total flux cleaned = 0.000711516 Jy
! Component: 900  -  total flux cleaned = 0.000720317 Jy
! Component: 950  -  total flux cleaned = 0.000762848 Jy
! Component: 1000  -  total flux cleaned = 0.0007797 Jy
! Component: 1050  -  total flux cleaned = 0.000771301 Jy
! Component: 1100  -  total flux cleaned = 0.000787807 Jy
! Component: 1150  -  total flux cleaned = 0.000812299 Jy
! Component: 1200  -  total flux cleaned = 0.000812264 Jy
! Component: 1250  -  total flux cleaned = 0.00079609 Jy
! Component: 1300  -  total flux cleaned = 0.000812196 Jy
! Component: 1350  -  total flux cleaned = 0.000836093 Jy
! Component: 1400  -  total flux cleaned = 0.000828205 Jy
! Component: 1450  -  total flux cleaned = 0.000859536 Jy
! Component: 1500  -  total flux cleaned = 0.00091392 Jy
! Component: 1550  -  total flux cleaned = 0.000913899 Jy
! Component: 1600  -  total flux cleaned = 0.000936928 Jy
! Component: 1650  -  total flux cleaned = 0.00094443 Jy
! Component: 1700  -  total flux cleaned = 0.000951873 Jy
! Component: 1750  -  total flux cleaned = 0.000959383 Jy
! Component: 1800  -  total flux cleaned = 0.000944553 Jy
! Component: 1850  -  total flux cleaned = 0.000996176 Jy
! Component: 1900  -  total flux cleaned = 0.00102537 Jy
! Component: 1950  -  total flux cleaned = 0.00102528 Jy
! Component: 2000  -  total flux cleaned = 0.00101799 Jy
! Component: 2050  -  total flux cleaned = 0.00101076 Jy
! Component: 2100  -  total flux cleaned = 0.00103919 Jy
! Component: 2150  -  total flux cleaned = 0.00105326 Jy
! Component: 2200  -  total flux cleaned = 0.00104618 Jy
! Component: 2250  -  total flux cleaned = 0.00105325 Jy
! Component: 2300  -  total flux cleaned = 0.00106719 Jy
! Component: 2350  -  total flux cleaned = 0.00110855 Jy
! Component: 2400  -  total flux cleaned = 0.00108808 Jy
! Component: 2450  -  total flux cleaned = 0.00111524 Jy
! Component: 2500  -  total flux cleaned = 0.00111522 Jy
! Component: 2550  -  total flux cleaned = 0.00111522 Jy
! Component: 2600  -  total flux cleaned = 0.00113527 Jy
! Component: 2650  -  total flux cleaned = 0.00114854 Jy
! Component: 2700  -  total flux cleaned = 0.00112229 Jy
! Component: 2750  -  total flux cleaned = 0.00112241 Jy
! Component: 2800  -  total flux cleaned = 0.00114845 Jy
! Component: 2850  -  total flux cleaned = 0.00113551 Jy
! Component: 2900  -  total flux cleaned = 0.00114198 Jy
! Component: 2950  -  total flux cleaned = 0.00114204 Jy
! Component: 3000  -  total flux cleaned = 0.00114835 Jy
! Component: 3050  -  total flux cleaned = 0.00116086 Jy
! Component: 3100  -  total flux cleaned = 0.00114204 Jy
! Component: 3150  -  total flux cleaned = 0.00114829 Jy
! Component: 3200  -  total flux cleaned = 0.00114824 Jy
! Component: 3250  -  total flux cleaned = 0.00115441 Jy
! Component: 3300  -  total flux cleaned = 0.0011544 Jy
! Component: 3350  -  total flux cleaned = 0.00111777 Jy
! Component: 3400  -  total flux cleaned = 0.00109338 Jy
! Component: 3450  -  total flux cleaned = 0.00109339 Jy
! Component: 3500  -  total flux cleaned = 0.00109344 Jy
! Component: 3550  -  total flux cleaned = 0.00111742 Jy
! Component: 3600  -  total flux cleaned = 0.00109362 Jy
! Component: 3650  -  total flux cleaned = 0.00111137 Jy
! Component: 3700  -  total flux cleaned = 0.00110551 Jy
! Component: 3750  -  total flux cleaned = 0.00108791 Jy
! Component: 3800  -  total flux cleaned = 0.00107628 Jy
! Component: 3850  -  total flux cleaned = 0.00106465 Jy
! Component: 3900  -  total flux cleaned = 0.00100694 Jy
! Component: 3950  -  total flux cleaned = 0.00100692 Jy
! Component: 4000  -  total flux cleaned = 0.000989744 Jy
! Component: 4050  -  total flux cleaned = 0.000983998 Jy
! Total flux subtracted in 4096 components = 0.000955633 Jy
! Clean residual min=-0.000304 max=0.000382 Jy/beam
! Clean residual mean=0.000000 rms=0.000100 Jy/beam
! Combined flux in latest and established models = 0.0727162 Jy
keep
! Adding 307 model components to the UV plane model.
! The established model now contains 410 components and 0.0727162 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1929+0910_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9549 x 2.316 at -10.71 degrees (North through East)
! Clean map  min=-0.00045484  max=0.054744 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1929+0910_X_map.fits
wmodel /image_prod/ug002_uva//J1929+0910_X_map.mod
! Writing 410 model components to file: /image_prod/ug002_uva//J1929+0910_X_map.mod
wobs   /image_prod/ug002_uva//J1929+0910_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1929+0910_X_uvs.fits
wwins  /image_prod/ug002_uva//J1929+0910_X_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J1929+0910_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.054744 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.92859e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.544092 0.544092 1.08818 2.17637 4.35274 8.70547 17.4109 34.8219 69.6438
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.054 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  551.377 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1929+0910_X_dfm.log closed on Thu Mar  5 04:12:29 2020