! Started logfile: /image_prod/ug002_uva//J1924-1549_S_b_dfm.log on Thu Mar  5 04:09:54 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1924-1549_S_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1924-1549_S_b_uva.fits
! AN table 1: 25 integrations on 36 of 36 possible baselines.
! AN table 2: 25 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.983333 visibilities/baseline/integration-bin.
! Found source: J1924-1549
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5310 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1924-1549_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.018034Jy  sigma=7.467660
! Fit after  self-cal, rms=0.871511Jy  sigma=6.369848
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.509 mas, bmaj=6.984 mas, bpa=-1.001 degrees
! Estimated noise=1.83915 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100327 Jy
! Component: 100  -  total flux cleaned = 0.127138 Jy
! Total flux subtracted in 100 components = 0.127138 Jy
! Clean residual min=-0.012688 max=0.022897 Jy/beam
! Clean residual mean=0.000011 rms=0.004264 Jy/beam
! Combined flux in latest and established models = 0.127138 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.127138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100833Jy  sigma=0.705922
! Fit after  self-cal, rms=0.100521Jy  sigma=0.704437
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.054 mas, bmaj=7.698 mas, bpa=-1.201 degrees
! Estimated noise=1.36989 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209857 Jy
! Component: 100  -  total flux cleaned = 0.0328627 Jy
! Component: 150  -  total flux cleaned = 0.0396445 Jy
! Component: 200  -  total flux cleaned = 0.0433412 Jy
! Total flux subtracted in 200 components = 0.0433412 Jy
! Clean residual min=-0.015621 max=0.029038 Jy/beam
! Clean residual mean=0.000028 rms=0.005947 Jy/beam
! Combined flux in latest and established models = 0.170479 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 18 components and 0.17048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096898Jy  sigma=0.667361
! Fit after  self-cal, rms=0.096837Jy  sigma=0.666991
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.054 x 7.698 at -1.201 degrees (North through East)
! Clean map  min=-0.015532  max=0.12268 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.58     FD        0.80     HN        1.26     LA        0.94     
!   MK        0.95     NL        1.01     OV        1.11     PT        0.80     
!   SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.28     FD        1.21     KP        0.74     LA        0.79     
!   MK        1.27     NL        1.85     OV        0.97     PT        0.66     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        3.41     FD        1.01     HN        1.33     LA        0.95     
!   MK        0.96     NL        1.03     OV        1.10     PT        0.83     
!   SC        0.91     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        3.34     FD        1.15     KP        0.76     LA        0.80     
!   MK        1.30     NL        2.09     OV        0.99     PT        0.68     
!   SC        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.94     FD        1.03     HN        1.24     LA        0.97     
!   MK        1.00     NL        1.07     OV        1.05     PT        0.83     
!   SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.24     FD        1.12     KP        0.83     LA        0.79     
!   MK        1.19     NL        2.36     OV        0.91     PT        0.67     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.096837Jy  sigma=0.666991
! Fit after  self-cal, rms=0.138001Jy  sigma=0.536372
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.111 mas, bmaj=7.856 mas, bpa=-0.4558 degrees
! Estimated noise=1.44021 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00084943 Jy
! Component: 100  -  total flux cleaned = -0.00159046 Jy
! Component: 150  -  total flux cleaned = -0.00213587 Jy
! Component: 200  -  total flux cleaned = -0.00271591 Jy
! Total flux subtracted in 200 components = -0.00271591 Jy
! Clean residual min=-0.010644 max=0.016596 Jy/beam
! Clean residual mean=0.000032 rms=0.003365 Jy/beam
! Combined flux in latest and established models = 0.167764 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 22 components and 0.167764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.137650Jy  sigma=0.535354
! Fit after  self-cal, rms=0.139624Jy  sigma=0.532495
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.139624Jy  sigma=0.532495
! Fit after  self-cal, rms=0.145758Jy  sigma=0.532012
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.144 mas, bmaj=7.937 mas, bpa=-0.7072 degrees
! Estimated noise=1.45519 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000477101 Jy
! Component: 100  -  total flux cleaned = -0.00112114 Jy
! Component: 150  -  total flux cleaned = -0.00169668 Jy
! Component: 200  -  total flux cleaned = -0.00221199 Jy
! Total flux subtracted in 200 components = -0.00221199 Jy
! Clean residual min=-0.010494 max=0.016520 Jy/beam
! Clean residual mean=0.000032 rms=0.003314 Jy/beam
! Combined flux in latest and established models = 0.165552 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 26 components and 0.165552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.145472Jy  sigma=0.531542
! Fit after  self-cal, rms=0.145566Jy  sigma=0.531460
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.5, -30.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161299 Jy
! Component: 100  -  total flux cleaned = 0.021375 Jy
! Component: 150  -  total flux cleaned = 0.0219869 Jy
! Component: 200  -  total flux cleaned = 0.0225086 Jy
! Total flux subtracted in 200 components = 0.0225086 Jy
! Clean residual min=-0.009063 max=0.013267 Jy/beam
! Clean residual mean=0.000016 rms=0.002547 Jy/beam
! Combined flux in latest and established models = 0.18806 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 53 components and 0.18806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.143797Jy  sigma=0.505168
! Fit after  self-cal, rms=0.143443Jy  sigma=0.503032
! Inverting map 
! Added new window around map position (-12, -21).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119013 Jy
! Component: 100  -  total flux cleaned = 0.0134129 Jy
! Component: 150  -  total flux cleaned = 0.0136153 Jy
! Component: 200  -  total flux cleaned = 0.0141675 Jy
! Total flux subtracted in 200 components = 0.0141675 Jy
! Clean residual min=-0.007307 max=0.009740 Jy/beam
! Clean residual mean=0.000013 rms=0.002111 Jy/beam
! Combined flux in latest and established models = 0.202228 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 75 components and 0.202228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.141857Jy  sigma=0.490661
! Fit after  self-cal, rms=0.141604Jy  sigma=0.487801
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.141604Jy  sigma=0.487801
! Fit after  self-cal, rms=0.129453Jy  sigma=0.483087
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.12 mas, bmaj=7.926 mas, bpa=-0.4303 degrees
! Estimated noise=1.42111 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00692552 Jy
! Component: 100  -  total flux cleaned = 0.00871075 Jy
! Component: 150  -  total flux cleaned = 0.00915555 Jy
! Component: 200  -  total flux cleaned = 0.00941214 Jy
! Total flux subtracted in 200 components = 0.00941214 Jy
! Clean residual min=-0.006022 max=0.007812 Jy/beam
! Clean residual mean=0.000013 rms=0.001734 Jy/beam
! Combined flux in latest and established models = 0.21164 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 109 components and 0.21164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128820Jy  sigma=0.477445
! Fit after  self-cal, rms=0.128638Jy  sigma=0.476242
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00222401 Jy
! Component: 100  -  total flux cleaned = 0.00297112 Jy
! Component: 150  -  total flux cleaned = 0.00319155 Jy
! Component: 200  -  total flux cleaned = 0.00319164 Jy
! Total flux subtracted in 200 components = 0.00319164 Jy
! Clean residual min=-0.005706 max=0.007291 Jy/beam
! Clean residual mean=0.000011 rms=0.001611 Jy/beam
! Combined flux in latest and established models = 0.214831 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 128 components and 0.214832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128337Jy  sigma=0.474059
! Fit after  self-cal, rms=0.128321Jy  sigma=0.473689
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.128321Jy  sigma=0.473689
! Fit after  self-cal, rms=0.124386Jy  sigma=0.472490
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.257 mas, bmaj=17.65 mas, bpa=7.845 degrees
! Estimated noise=1.69463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00390969 Jy
! Component: 100  -  total flux cleaned = 0.00572287 Jy
! Component: 150  -  total flux cleaned = 0.00694778 Jy
! Component: 200  -  total flux cleaned = 0.00744024 Jy
! Total flux subtracted in 200 components = 0.00744024 Jy
! Clean residual min=-0.005857 max=0.007880 Jy/beam
! Clean residual mean=0.000015 rms=0.002304 Jy/beam
! Combined flux in latest and established models = 0.222272 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 147 components and 0.222272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124167Jy  sigma=0.471297
! Fit after  self-cal, rms=0.124101Jy  sigma=0.470230
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123311 Jy
! Component: 100  -  total flux cleaned = 0.00206236 Jy
! Component: 150  -  total flux cleaned = 0.00240556 Jy
! Component: 200  -  total flux cleaned = 0.00270917 Jy
! Total flux subtracted in 200 components = 0.00270917 Jy
! Clean residual min=-0.005758 max=0.007328 Jy/beam
! Clean residual mean=0.000013 rms=0.002140 Jy/beam
! Combined flux in latest and established models = 0.224981 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 157 components and 0.224981 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124030Jy  sigma=0.470361
! Fit after  self-cal, rms=0.124068Jy  sigma=0.470001
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.114 mas, bmaj=7.943 mas, bpa=-0.4067 degrees
! Estimated noise=1.40946 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.114 x 7.943 at -0.4067 degrees (North through East)
! Clean map  min=-0.0047136  max=0.13367 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.538 mas, bmaj=7.112 mas, bpa=-0.148 degrees
! Estimated noise=1.91807 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103637 Jy
! Component: 100  -  total flux cleaned = 0.133637 Jy
! Component: 150  -  total flux cleaned = 0.152238 Jy
! Component: 200  -  total flux cleaned = 0.165867 Jy
! Total flux subtracted in 200 components = 0.165867 Jy
! Clean residual min=-0.007872 max=0.009132 Jy/beam
! Clean residual mean=0.000014 rms=0.002169 Jy/beam
! Combined flux in latest and established models = 0.165867 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.165867 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.114 mas, bmaj=7.943 mas, bpa=-0.4067 degrees
! Estimated noise=1.40946 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0150995 Jy
! Component: 100  -  total flux cleaned = 0.0263889 Jy
! Component: 150  -  total flux cleaned = 0.0350967 Jy
! Component: 200  -  total flux cleaned = 0.0418758 Jy
! Total flux subtracted in 200 components = 0.0418758 Jy
! Clean residual min=-0.006131 max=0.007857 Jy/beam
! Clean residual mean=0.000010 rms=0.001762 Jy/beam
! Combined flux in latest and established models = 0.207743 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 75 components and 0.207743 Jy
! Inverting map 
! Added new window around map position (-14.5, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00734756 Jy
! Component: 100  -  total flux cleaned = 0.0112115 Jy
! Component: 150  -  total flux cleaned = 0.0136294 Jy
! Component: 200  -  total flux cleaned = 0.015147 Jy
! Total flux subtracted in 200 components = 0.015147 Jy
! Clean residual min=-0.005184 max=0.005205 Jy/beam
! Clean residual mean=0.000004 rms=0.001376 Jy/beam
! Combined flux in latest and established models = 0.22289 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 108 components and 0.22289 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.257 mas, bmaj=17.65 mas, bpa=7.845 degrees
! Estimated noise=1.69463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00437623 Jy
! Component: 100  -  total flux cleaned = 0.00581927 Jy
! Component: 150  -  total flux cleaned = 0.00677155 Jy
! Component: 200  -  total flux cleaned = 0.00738929 Jy
! Total flux subtracted in 200 components = 0.00738929 Jy
! Clean residual min=-0.005169 max=0.006923 Jy/beam
! Clean residual mean=0.000002 rms=0.001846 Jy/beam
! Combined flux in latest and established models = 0.230279 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00034063 Jy
! Component: 100  -  total flux cleaned = 0.000554997 Jy
! Component: 150  -  total flux cleaned = 0.000759388 Jy
! Component: 200  -  total flux cleaned = 0.000951707 Jy
! Total flux subtracted in 200 components = 0.000951707 Jy
! Clean residual min=-0.004934 max=0.006502 Jy/beam
! Clean residual mean=0.000001 rms=0.001761 Jy/beam
! Combined flux in latest and established models = 0.231231 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 162 components and 0.231231 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.114 mas, bmaj=7.943 mas, bpa=-0.4067 degrees
! Estimated noise=1.40946 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000290139 Jy
! Component: 100  -  total flux cleaned = 0.000302178 Jy
! Component: 150  -  total flux cleaned = 0.000210355 Jy
! Component: 200  -  total flux cleaned = 0.00021251 Jy
! Total flux subtracted in 200 components = 0.00021251 Jy
! Clean residual min=-0.004285 max=0.004383 Jy/beam
! Clean residual mean=0.000002 rms=0.001177 Jy/beam
! Combined flux in latest and established models = 0.231443 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 187 components and 0.231443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123721Jy  sigma=0.464671
! Fit after  self-cal, rms=0.123737Jy  sigma=0.463882
wmodel J1924-1549_S_b_map.mod
! Writing 187 model components to file: J1924-1549_S_b_map.mod
wobs   J1924-1549_S_b_uvs.fits
! Writing UV FITS file: J1924-1549_S_b_uvs.fits
wwins  J1924-1549_S_b_map.win
! wwins: Wrote 4 windows to J1924-1549_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000485243 Jy
! Component: 100  -  total flux cleaned = 0.000706793 Jy
! Component: 150  -  total flux cleaned = 0.000497421 Jy
! Component: 200  -  total flux cleaned = 0.000365373 Jy
! Component: 250  -  total flux cleaned = 0.000365566 Jy
! Component: 300  -  total flux cleaned = 0.0002437 Jy
! Component: 350  -  total flux cleaned = 0.000243774 Jy
! Component: 400  -  total flux cleaned = 0.000127546 Jy
! Component: 450  -  total flux cleaned = 7.17911e-05 Jy
! Component: 500  -  total flux cleaned = 1.54883e-05 Jy
! Component: 550  -  total flux cleaned = -0.00030564 Jy
! Component: 600  -  total flux cleaned = -0.000409236 Jy
! Component: 650  -  total flux cleaned = -0.000562916 Jy
! Component: 700  -  total flux cleaned = -0.000911544 Jy
! Component: 750  -  total flux cleaned = -0.00110576 Jy
! Component: 800  -  total flux cleaned = -0.00143855 Jy
! Component: 850  -  total flux cleaned = -0.00153259 Jy
! Component: 900  -  total flux cleaned = -0.00185357 Jy
! Component: 950  -  total flux cleaned = -0.00198825 Jy
! Component: 1000  -  total flux cleaned = -0.00225281 Jy
! Component: 1050  -  total flux cleaned = -0.00250986 Jy
! Component: 1100  -  total flux cleaned = -0.00259354 Jy
! Component: 1150  -  total flux cleaned = -0.00271821 Jy
! Component: 1200  -  total flux cleaned = -0.00288144 Jy
! Component: 1250  -  total flux cleaned = -0.0029218 Jy
! Component: 1300  -  total flux cleaned = -0.00307949 Jy
! Component: 1350  -  total flux cleaned = -0.00315678 Jy
! Component: 1400  -  total flux cleaned = -0.00330913 Jy
! Component: 1450  -  total flux cleaned = -0.00345902 Jy
! Component: 1500  -  total flux cleaned = -0.00356965 Jy
! Component: 1550  -  total flux cleaned = -0.00367859 Jy
! Component: 1600  -  total flux cleaned = -0.00389367 Jy
! Component: 1650  -  total flux cleaned = -0.00396332 Jy
! Component: 1700  -  total flux cleaned = -0.00413744 Jy
! Component: 1750  -  total flux cleaned = -0.00427439 Jy
! Component: 1800  -  total flux cleaned = -0.00430828 Jy
! Component: 1850  -  total flux cleaned = -0.0044759 Jy
! Component: 1900  -  total flux cleaned = -0.00464024 Jy
! Component: 1950  -  total flux cleaned = -0.00470449 Jy
! Component: 2000  -  total flux cleaned = -0.00476886 Jy
! Component: 2050  -  total flux cleaned = -0.00480055 Jy
! Component: 2100  -  total flux cleaned = -0.00483183 Jy
! Component: 2150  -  total flux cleaned = -0.00486261 Jy
! Component: 2200  -  total flux cleaned = -0.00489369 Jy
! Component: 2250  -  total flux cleaned = -0.00501403 Jy
! Component: 2300  -  total flux cleaned = -0.00501415 Jy
! Component: 2350  -  total flux cleaned = -0.0051307 Jy
! Component: 2400  -  total flux cleaned = -0.00510194 Jy
! Component: 2450  -  total flux cleaned = -0.00513104 Jy
! Component: 2500  -  total flux cleaned = -0.0051879 Jy
! Component: 2550  -  total flux cleaned = -0.0053549 Jy
! Component: 2600  -  total flux cleaned = -0.00535449 Jy
! Component: 2650  -  total flux cleaned = -0.00540882 Jy
! Component: 2700  -  total flux cleaned = -0.00546224 Jy
! Component: 2750  -  total flux cleaned = -0.00554227 Jy
! Component: 2800  -  total flux cleaned = -0.00554255 Jy
! Component: 2850  -  total flux cleaned = -0.00556873 Jy
! Component: 2900  -  total flux cleaned = -0.00559502 Jy
! Component: 2950  -  total flux cleaned = -0.00567169 Jy
! Component: 3000  -  total flux cleaned = -0.00572259 Jy
! Component: 3050  -  total flux cleaned = -0.00579726 Jy
! Component: 3100  -  total flux cleaned = -0.0058719 Jy
! Component: 3150  -  total flux cleaned = -0.00592067 Jy
! Component: 3200  -  total flux cleaned = -0.00592048 Jy
! Component: 3250  -  total flux cleaned = -0.00592079 Jy
! Component: 3300  -  total flux cleaned = -0.00601567 Jy
! Component: 3350  -  total flux cleaned = -0.00596823 Jy
! Component: 3400  -  total flux cleaned = -0.00594457 Jy
! Component: 3450  -  total flux cleaned = -0.00594499 Jy
! Component: 3500  -  total flux cleaned = -0.00601383 Jy
! Component: 3550  -  total flux cleaned = -0.00605947 Jy
! Component: 3600  -  total flux cleaned = -0.00610434 Jy
! Component: 3650  -  total flux cleaned = -0.00603754 Jy
! Component: 3700  -  total flux cleaned = -0.00605955 Jy
! Component: 3750  -  total flux cleaned = -0.00605954 Jy
! Component: 3800  -  total flux cleaned = -0.00603806 Jy
! Component: 3850  -  total flux cleaned = -0.00601662 Jy
! Component: 3900  -  total flux cleaned = -0.00603808 Jy
! Component: 3950  -  total flux cleaned = -0.0060381 Jy
! Component: 4000  -  total flux cleaned = -0.00599596 Jy
! Component: 4050  -  total flux cleaned = -0.00603779 Jy
! Total flux subtracted in 4096 components = -0.00603794 Jy
! Clean residual min=-0.001139 max=0.001165 Jy/beam
! Clean residual mean=0.000000 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.225405 Jy
keep
! Adding 328 model components to the UV plane model.
! The established model now contains 515 components and 0.225405 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1924-1549_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.114 x 7.943 at -0.4067 degrees (North through East)
! Clean map  min=-0.0040939  max=0.13324 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1924-1549_S_b_map.fits
wmodel /image_prod/ug002_uva//J1924-1549_S_b_map.mod
! Writing 515 model components to file: /image_prod/ug002_uva//J1924-1549_S_b_map.mod
wobs   /image_prod/ug002_uva//J1924-1549_S_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1924-1549_S_b_uvs.fits
wwins  /image_prod/ug002_uva//J1924-1549_S_b_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J1924-1549_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.133236 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000387259 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.871966 0.871966 1.74393 3.48787 6.97573 13.9515 27.9029 55.8058
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.133 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  344.049 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1924-1549_S_b_dfm.log closed on Thu Mar  5 04:09:58 2020