! Started logfile: /image_prod/ug002_uva//J1924+3329_S_dfm.log on Thu Mar 5 04:09:40 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1924+3329_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1924+3329_S_uva.fits ! AN table 1: 90 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.994444 visibilities/baseline/integration-bin. ! Found source: J1924+3329 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 7518 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1924+3329_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.022285Jy sigma=8.086453 ! Fit after self-cal, rms=0.885042Jy sigma=7.083803 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.662 mas, bmaj=5.044 mas, bpa=-7.404 degrees ! Estimated noise=1.44998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0960493 Jy ! Component: 100 - total flux cleaned = 0.148787 Jy ! Total flux subtracted in 100 components = 0.148787 Jy ! Clean residual min=-0.035073 max=0.044364 Jy/beam ! Clean residual mean=0.000025 rms=0.009816 Jy/beam ! Combined flux in latest and established models = 0.148787 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.148787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.231765Jy sigma=1.629437 ! Fit after self-cal, rms=0.229693Jy sigma=1.617791 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.058 mas, bmaj=5.699 mas, bpa=-7.081 degrees ! Estimated noise=1.06744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0629943 Jy ! Component: 100 - total flux cleaned = 0.104111 Jy ! Component: 150 - total flux cleaned = 0.132875 Jy ! Component: 200 - total flux cleaned = 0.153262 Jy ! Total flux subtracted in 200 components = 0.153262 Jy ! Clean residual min=-0.045979 max=0.047372 Jy/beam ! Clean residual mean=0.000051 rms=0.012534 Jy/beam ! Combined flux in latest and established models = 0.302049 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 47 components and 0.302049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.205170Jy sigma=1.458006 ! Fit after self-cal, rms=0.203316Jy sigma=1.445656 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.058 x 5.699 at -7.081 degrees (North through East) ! Clean map min=-0.04449 max=0.12743 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.88 HN 1.46 KP 0.60 ! MK 1.90 NL 1.33 OV 1.17 SC 1.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.86 HN 1.45 KP 0.67 ! MK 1.58 NL 1.22 OV 1.08 SC 2.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.76 HN 1.65 KP 0.66 ! MK 1.40 NL 1.15 OV 1.38 SC 1.93 ! ! ! Fit before self-cal, rms=0.203316Jy sigma=1.445656 ! Fit after self-cal, rms=0.271311Jy sigma=1.339591 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.585 mas, bmaj=6.401 mas, bpa=-8.695 degrees ! Estimated noise=1.31351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162909 Jy ! Component: 100 - total flux cleaned = 0.0194029 Jy ! Component: 150 - total flux cleaned = 0.021582 Jy ! Component: 200 - total flux cleaned = 0.0215527 Jy ! Total flux subtracted in 200 components = 0.0215527 Jy ! Clean residual min=-0.048626 max=0.058309 Jy/beam ! Clean residual mean=-0.000000 rms=0.014296 Jy/beam ! Combined flux in latest and established models = 0.323602 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.323602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.267691Jy sigma=1.338675 ! Fit after self-cal, rms=0.272955Jy sigma=1.318630 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.272955Jy sigma=1.318630 ! Fit after self-cal, rms=1.202004Jy sigma=1.086631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.602 mas, bmaj=7.103 mas, bpa=-4.367 degrees ! Estimated noise=1.55181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017015 Jy ! Component: 100 - total flux cleaned = 0.0193467 Jy ! Component: 150 - total flux cleaned = 0.0179792 Jy ! Component: 200 - total flux cleaned = 0.0165094 Jy ! Total flux subtracted in 200 components = 0.0165094 Jy ! Clean residual min=-0.041726 max=0.057534 Jy/beam ! Clean residual mean=-0.000040 rms=0.012696 Jy/beam ! Combined flux in latest and established models = 0.340111 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.340111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.196906Jy sigma=1.092617 ! Fit after self-cal, rms=1.202060Jy sigma=1.079692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-86.5, 53). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412129 Jy ! Component: 100 - total flux cleaned = 0.0426175 Jy ! Component: 150 - total flux cleaned = 0.0425287 Jy ! Component: 200 - total flux cleaned = 0.0439063 Jy ! Total flux subtracted in 200 components = 0.0439063 Jy ! Clean residual min=-0.044017 max=0.052711 Jy/beam ! Clean residual mean=-0.000039 rms=0.012182 Jy/beam ! Combined flux in latest and established models = 0.384017 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 84 components and 0.384018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.190529Jy sigma=1.080128 ! Fit after self-cal, rms=1.186224Jy sigma=1.058517 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.186224Jy sigma=1.058517 ! Fit after self-cal, rms=1.040663Jy sigma=1.019917 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.74 mas, bmaj=7.161 mas, bpa=-6.317 degrees ! Estimated noise=1.50221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288014 Jy ! Component: 100 - total flux cleaned = 0.0359506 Jy ! Component: 150 - total flux cleaned = 0.0425577 Jy ! Component: 200 - total flux cleaned = 0.0448848 Jy ! Total flux subtracted in 200 components = 0.0448848 Jy ! Clean residual min=-0.044829 max=0.046751 Jy/beam ! Clean residual mean=-0.000033 rms=0.011452 Jy/beam ! Combined flux in latest and established models = 0.428902 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 103 components and 0.428902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.032326Jy sigma=1.028073 ! Fit after self-cal, rms=1.032023Jy sigma=1.016299 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00803002 Jy ! Component: 100 - total flux cleaned = 0.00692645 Jy ! Component: 150 - total flux cleaned = 0.0039883 Jy ! Component: 200 - total flux cleaned = 0.00352574 Jy ! Total flux subtracted in 200 components = 0.00352574 Jy ! Clean residual min=-0.045000 max=0.048298 Jy/beam ! Clean residual mean=-0.000039 rms=0.011577 Jy/beam ! Combined flux in latest and established models = 0.432428 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 116 components and 0.432428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.026866Jy sigma=1.032172 ! Fit after self-cal, rms=1.027554Jy sigma=1.028600 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.027554Jy sigma=1.028600 ! Fit after self-cal, rms=1.285462Jy sigma=0.993145 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.257 mas, bmaj=9.096 mas, bpa=-11.65 degrees ! Estimated noise=1.51159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252283 Jy ! Component: 100 - total flux cleaned = 0.0261801 Jy ! Component: 150 - total flux cleaned = 0.0247403 Jy ! Component: 200 - total flux cleaned = 0.0247033 Jy ! Total flux subtracted in 200 components = 0.0247033 Jy ! Clean residual min=-0.056741 max=0.061820 Jy/beam ! Clean residual mean=-0.000053 rms=0.016639 Jy/beam ! Combined flux in latest and established models = 0.457131 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 130 components and 0.457131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.277107Jy sigma=1.034385 ! Fit after self-cal, rms=1.278381Jy sigma=1.026899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000984545 Jy ! Component: 100 - total flux cleaned = -0.00411996 Jy ! Component: 150 - total flux cleaned = -0.00507959 Jy ! Component: 200 - total flux cleaned = -0.00634464 Jy ! Total flux subtracted in 200 components = -0.00634464 Jy ! Clean residual min=-0.056581 max=0.062594 Jy/beam ! Clean residual mean=-0.000054 rms=0.016973 Jy/beam ! Combined flux in latest and established models = 0.450787 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 155 components and 0.450787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.273901Jy sigma=1.061470 ! Fit after self-cal, rms=1.274544Jy sigma=1.058932 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.936 mas, bmaj=7.34 mas, bpa=-6.314 degrees ! Estimated noise=1.57364 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.936 x 7.34 at -6.314 degrees (North through East) ! Clean map min=-0.052819 max=0.19071 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=6.643 mas, bpa=-7.015 degrees ! Estimated noise=2.50048 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148765 Jy ! Component: 100 - total flux cleaned = 0.239357 Jy ! Component: 150 - total flux cleaned = 0.301687 Jy ! Component: 200 - total flux cleaned = 0.342758 Jy ! Total flux subtracted in 200 components = 0.342758 Jy ! Clean residual min=-0.051365 max=0.053402 Jy/beam ! Clean residual mean=0.000022 rms=0.012145 Jy/beam ! Combined flux in latest and established models = 0.342758 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.342758 Jy ! Inverting map and beam ! Estimated beam: bmin=3.936 mas, bmaj=7.34 mas, bpa=-6.314 degrees ! Estimated noise=1.57364 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0343509 Jy ! Component: 100 - total flux cleaned = 0.0549279 Jy ! Component: 150 - total flux cleaned = 0.0624908 Jy ! Component: 200 - total flux cleaned = 0.0680429 Jy ! Total flux subtracted in 200 components = 0.0680429 Jy ! Clean residual min=-0.050527 max=0.047180 Jy/beam ! Clean residual mean=0.000012 rms=0.012255 Jy/beam ! Combined flux in latest and established models = 0.410801 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 48 components and 0.410801 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.257 mas, bmaj=9.096 mas, bpa=-11.65 degrees ! Estimated noise=1.51159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196359 Jy ! Component: 100 - total flux cleaned = 0.0104622 Jy ! Component: 150 - total flux cleaned = 0.0160827 Jy ! Component: 200 - total flux cleaned = 0.0215764 Jy ! Total flux subtracted in 200 components = 0.0215764 Jy ! Clean residual min=-0.058030 max=0.060754 Jy/beam ! Clean residual mean=-0.000022 rms=0.016846 Jy/beam ! Combined flux in latest and established models = 0.432377 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00643913 Jy ! Component: 100 - total flux cleaned = 0.00970201 Jy ! Component: 150 - total flux cleaned = 0.00970324 Jy ! Component: 200 - total flux cleaned = 0.00926664 Jy ! Total flux subtracted in 200 components = 0.00926664 Jy ! Clean residual min=-0.058129 max=0.061000 Jy/beam ! Clean residual mean=-0.000039 rms=0.017053 Jy/beam ! Combined flux in latest and established models = 0.441644 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 80 components and 0.441644 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.936 mas, bmaj=7.34 mas, bpa=-6.314 degrees ! Estimated noise=1.57364 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119288 Jy ! Component: 100 - total flux cleaned = 0.000525323 Jy ! Component: 150 - total flux cleaned = 0.00153485 Jy ! Component: 200 - total flux cleaned = 0.00372532 Jy ! Total flux subtracted in 200 components = 0.00372532 Jy ! Clean residual min=-0.052996 max=0.052135 Jy/beam ! Clean residual mean=-0.000035 rms=0.012346 Jy/beam ! Combined flux in latest and established models = 0.445369 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 100 components and 0.445369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.272254Jy sigma=1.066926 ! Fit after self-cal, rms=1.273113Jy sigma=1.062166 wmodel J1924+3329_S_map.mod ! Writing 100 model components to file: J1924+3329_S_map.mod wobs J1924+3329_S_uvs.fits ! Writing UV FITS file: J1924+3329_S_uvs.fits wwins J1924+3329_S_map.win ! wwins: Wrote 2 windows to J1924+3329_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00152686 Jy ! Component: 100 - total flux cleaned = -0.0054799 Jy ! Component: 150 - total flux cleaned = -0.00256907 Jy ! Component: 200 - total flux cleaned = 0.000193483 Jy ! Component: 250 - total flux cleaned = 0.00416371 Jy ! Component: 300 - total flux cleaned = 0.00732861 Jy ! Component: 350 - total flux cleaned = 0.00918779 Jy ! Component: 400 - total flux cleaned = 0.0109999 Jy ! Component: 450 - total flux cleaned = 0.0104013 Jy ! Component: 500 - total flux cleaned = 0.00866433 Jy ! Component: 550 - total flux cleaned = 0.00752548 Jy ! Component: 600 - total flux cleaned = 0.007517 Jy ! Component: 650 - total flux cleaned = 0.00588538 Jy ! Component: 700 - total flux cleaned = 0.00536038 Jy ! Component: 750 - total flux cleaned = 0.00589061 Jy ! Component: 800 - total flux cleaned = 0.00589112 Jy ! Component: 850 - total flux cleaned = 0.00742341 Jy ! Component: 900 - total flux cleaned = 0.00843247 Jy ! Component: 950 - total flux cleaned = 0.0089319 Jy ! Component: 1000 - total flux cleaned = 0.00941556 Jy ! Component: 1050 - total flux cleaned = 0.0118476 Jy ! Component: 1100 - total flux cleaned = 0.0123319 Jy ! Component: 1150 - total flux cleaned = 0.0137564 Jy ! Component: 1200 - total flux cleaned = 0.0151709 Jy ! Component: 1250 - total flux cleaned = 0.0156357 Jy ! Component: 1300 - total flux cleaned = 0.0156352 Jy ! Component: 1350 - total flux cleaned = 0.0174794 Jy ! Component: 1400 - total flux cleaned = 0.0202068 Jy ! Component: 1450 - total flux cleaned = 0.0211087 Jy ! Component: 1500 - total flux cleaned = 0.022897 Jy ! Component: 1550 - total flux cleaned = 0.0237812 Jy ! Component: 1600 - total flux cleaned = 0.0242224 Jy ! Component: 1650 - total flux cleaned = 0.0246622 Jy ! Component: 1700 - total flux cleaned = 0.0250982 Jy ! Component: 1750 - total flux cleaned = 0.0263934 Jy ! Component: 1800 - total flux cleaned = 0.0280991 Jy ! Component: 1850 - total flux cleaned = 0.0289442 Jy ! Component: 1900 - total flux cleaned = 0.030206 Jy ! Component: 1950 - total flux cleaned = 0.0306253 Jy ! Component: 2000 - total flux cleaned = 0.0310382 Jy ! Component: 2050 - total flux cleaned = 0.0326856 Jy ! Component: 2100 - total flux cleaned = 0.0326835 Jy ! Component: 2150 - total flux cleaned = 0.033093 Jy ! Component: 2200 - total flux cleaned = 0.0343043 Jy ! Component: 2250 - total flux cleaned = 0.0359101 Jy ! Component: 2300 - total flux cleaned = 0.035909 Jy ! Component: 2350 - total flux cleaned = 0.0363079 Jy ! Component: 2400 - total flux cleaned = 0.0378883 Jy ! Component: 2450 - total flux cleaned = 0.0394585 Jy ! Component: 2500 - total flux cleaned = 0.0406286 Jy ! Component: 2550 - total flux cleaned = 0.0417884 Jy ! Component: 2600 - total flux cleaned = 0.0425556 Jy ! Component: 2650 - total flux cleaned = 0.0429418 Jy ! Component: 2700 - total flux cleaned = 0.0429426 Jy ! Component: 2750 - total flux cleaned = 0.0440771 Jy ! Component: 2800 - total flux cleaned = 0.0455791 Jy ! Component: 2850 - total flux cleaned = 0.046328 Jy ! Component: 2900 - total flux cleaned = 0.0470724 Jy ! Component: 2950 - total flux cleaned = 0.0485507 Jy ! Component: 3000 - total flux cleaned = 0.0492851 Jy ! Component: 3050 - total flux cleaned = 0.0500133 Jy ! Component: 3100 - total flux cleaned = 0.0514648 Jy ! Component: 3150 - total flux cleaned = 0.0521869 Jy ! Component: 3200 - total flux cleaned = 0.0532652 Jy ! Component: 3250 - total flux cleaned = 0.0546928 Jy ! Component: 3300 - total flux cleaned = 0.0561144 Jy ! Component: 3350 - total flux cleaned = 0.0568224 Jy ! Component: 3400 - total flux cleaned = 0.0578766 Jy ! Component: 3450 - total flux cleaned = 0.0592755 Jy ! Component: 3500 - total flux cleaned = 0.0603192 Jy ! Component: 3550 - total flux cleaned = 0.0617002 Jy ! Component: 3600 - total flux cleaned = 0.063075 Jy ! Component: 3650 - total flux cleaned = 0.0640978 Jy ! Component: 3700 - total flux cleaned = 0.0651176 Jy ! Component: 3750 - total flux cleaned = 0.066813 Jy ! Component: 3800 - total flux cleaned = 0.0681621 Jy ! Component: 3850 - total flux cleaned = 0.0708457 Jy ! Component: 3900 - total flux cleaned = 0.071512 Jy ! Component: 3950 - total flux cleaned = 0.0725091 Jy ! Component: 4000 - total flux cleaned = 0.0741624 Jy ! Component: 4050 - total flux cleaned = 0.0751479 Jy ! Total flux subtracted in 4096 components = 0.0767842 Jy ! Clean residual min=-0.021255 max=0.016337 Jy/beam ! Clean residual mean=-0.000022 rms=0.006657 Jy/beam ! Combined flux in latest and established models = 0.522153 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 373 components and 0.522153 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1924+3329_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.936 x 7.34 at -6.314 degrees (North through East) ! Clean map min=-0.051461 max=0.19636 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1924+3329_S_map.fits wmodel /image_prod/ug002_uva//J1924+3329_S_map.mod ! Writing 373 model components to file: /image_prod/ug002_uva//J1924+3329_S_map.mod wobs /image_prod/ug002_uva//J1924+3329_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1924+3329_S_uvs.fits wwins /image_prod/ug002_uva//J1924+3329_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1924+3329_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.196361 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00664452 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -10.1515 10.1515 20.3029 40.6059 81.2117 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0199 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.196 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 29.552 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1924+3329_S_dfm.log closed on Thu Mar 5 04:09:43 2020