! Started logfile: /image_prod/ug002_uva//J1922+0841_S_dfm.log on Thu Mar  5 04:08:44 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1922+0841_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1922+0841_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.916667 visibilities/baseline/integration-bin.
! Found source: J1922+0841
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5940 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1922+0841_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022918Jy  sigma=7.603422
! Fit after  self-cal, rms=0.777952Jy  sigma=5.666593
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.668 mas, bmaj=6.72 mas, bpa=-7.117 degrees
! Estimated noise=1.60697 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.173595 Jy
! Component: 100  -  total flux cleaned = 0.236989 Jy
! Total flux subtracted in 100 components = 0.236989 Jy
! Clean residual min=-0.016776 max=0.033529 Jy/beam
! Clean residual mean=-0.000005 rms=0.004394 Jy/beam
! Combined flux in latest and established models = 0.236989 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.236989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106028Jy  sigma=0.719431
! Fit after  self-cal, rms=0.105422Jy  sigma=0.715484
! Inverting map 
! Added new window around map position (-3, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0398441 Jy
! Component: 100  -  total flux cleaned = 0.0649721 Jy
! Total flux subtracted in 100 components = 0.0649721 Jy
! Clean residual min=-0.011195 max=0.014003 Jy/beam
! Clean residual mean=0.000002 rms=0.002609 Jy/beam
! Combined flux in latest and established models = 0.301961 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 39 components and 0.301961 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086771Jy  sigma=0.554125
! Fit after  self-cal, rms=0.086431Jy  sigma=0.551422
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0181669 Jy
! Component: 100  -  total flux cleaned = 0.0298654 Jy
! Total flux subtracted in 100 components = 0.0298654 Jy
! Clean residual min=-0.009597 max=0.008314 Jy/beam
! Clean residual mean=0.000004 rms=0.002038 Jy/beam
! Combined flux in latest and established models = 0.331826 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 53 components and 0.331826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081825Jy  sigma=0.514625
! Fit after  self-cal, rms=0.081659Jy  sigma=0.513237
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.056 mas, bmaj=7.29 mas, bpa=-5.924 degrees
! Estimated noise=1.29113 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101957 Jy
! Component: 100  -  total flux cleaned = 0.0162816 Jy
! Component: 150  -  total flux cleaned = 0.0204257 Jy
! Component: 200  -  total flux cleaned = 0.022704 Jy
! Total flux subtracted in 200 components = 0.022704 Jy
! Clean residual min=-0.008596 max=0.007732 Jy/beam
! Clean residual mean=0.000011 rms=0.001887 Jy/beam
! Combined flux in latest and established models = 0.35453 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 73 components and 0.35453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.079990Jy  sigma=0.503185
! Fit after  self-cal, rms=0.079909Jy  sigma=0.502463
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.056 x 7.29 at -5.924 degrees (North through East)
! Clean map  min=-0.0080522  max=0.22047 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        1.07     KP        1.04     
!   LA        1.04     MK        1.00     NL        1.04     OV        0.84     
!   SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.03     HN        1.10     KP        1.13     
!   LA        1.06     MK        1.00     NL        0.88     OV        0.90     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.05     HN        1.07     KP        1.09     
!   LA        1.03     MK        1.02     NL        0.93     OV        0.91     
!   SC        1.11     
! 
! 
! Fit before self-cal, rms=0.079909Jy  sigma=0.502463
! Fit after  self-cal, rms=0.076181Jy  sigma=0.462815
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.075 mas, bmaj=7.325 mas, bpa=-5.94 degrees
! Estimated noise=1.30335 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0027845 Jy
! Component: 100  -  total flux cleaned = 0.00292978 Jy
! Component: 150  -  total flux cleaned = 0.00308309 Jy
! Component: 200  -  total flux cleaned = 0.0031733 Jy
! Total flux subtracted in 200 components = 0.0031733 Jy
! Clean residual min=-0.004377 max=0.003868 Jy/beam
! Clean residual mean=-0.000010 rms=0.001057 Jy/beam
! Combined flux in latest and established models = 0.357704 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 92 components and 0.357704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076024Jy  sigma=0.462145
! Fit after  self-cal, rms=0.076043Jy  sigma=0.461799
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076043Jy  sigma=0.461799
! Fit after  self-cal, rms=0.075359Jy  sigma=0.447620
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.068 mas, bmaj=7.295 mas, bpa=-5.772 degrees
! Estimated noise=1.30281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146573 Jy
! Component: 100  -  total flux cleaned = 0.00135927 Jy
! Component: 150  -  total flux cleaned = 0.00121754 Jy
! Component: 200  -  total flux cleaned = 0.00112871 Jy
! Total flux subtracted in 200 components = 0.00112871 Jy
! Clean residual min=-0.003719 max=0.002788 Jy/beam
! Clean residual mean=-0.000002 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.358833 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 101 components and 0.358832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075264Jy  sigma=0.447088
! Fit after  self-cal, rms=0.075230Jy  sigma=0.446963
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.8323e-05 Jy
! Component: 100  -  total flux cleaned = 6.49404e-06 Jy
! Component: 150  -  total flux cleaned = -7.60366e-05 Jy
! Component: 200  -  total flux cleaned = -0.000151786 Jy
! Total flux subtracted in 200 components = -0.000151786 Jy
! Clean residual min=-0.003434 max=0.002700 Jy/beam
! Clean residual mean=-0.000002 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.358681 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 103 components and 0.358681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075166Jy  sigma=0.446609
! Fit after  self-cal, rms=0.075145Jy  sigma=0.446521
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075145Jy  sigma=0.446521
! Fit after  self-cal, rms=0.075090Jy  sigma=0.446311
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.066 mas, bmaj=7.285 mas, bpa=-5.704 degrees
! Estimated noise=1.30122 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000597091 Jy
! Component: 100  -  total flux cleaned = 0.00064072 Jy
! Component: 150  -  total flux cleaned = 0.000601844 Jy
! Component: 200  -  total flux cleaned = 0.000529452 Jy
! Total flux subtracted in 200 components = 0.000529452 Jy
! Clean residual min=-0.003355 max=0.002667 Jy/beam
! Clean residual mean=-0.000002 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.35921 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 106 components and 0.35921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075028Jy  sigma=0.446010
! Fit after  self-cal, rms=0.075010Jy  sigma=0.445939
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.78525e-05 Jy
! Component: 100  -  total flux cleaned = 2.83516e-05 Jy
! Component: 150  -  total flux cleaned = -4.37204e-05 Jy
! Component: 200  -  total flux cleaned = -7.7041e-05 Jy
! Total flux subtracted in 200 components = -7.7041e-05 Jy
! Clean residual min=-0.003151 max=0.002611 Jy/beam
! Clean residual mean=-0.000002 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.359133 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 107 components and 0.359133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074963Jy  sigma=0.445689
! Fit after  self-cal, rms=0.074948Jy  sigma=0.445624
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074948Jy  sigma=0.445624
! Fit after  self-cal, rms=0.074683Jy  sigma=0.445606
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.9 mas, bmaj=10.56 mas, bpa=-2.491 degrees
! Estimated noise=1.66234 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.8874e-06 Jy
! Component: 100  -  total flux cleaned = -9.60986e-05 Jy
! Component: 150  -  total flux cleaned = -0.000222225 Jy
! Component: 200  -  total flux cleaned = -0.000362688 Jy
! Total flux subtracted in 200 components = -0.000362688 Jy
! Clean residual min=-0.002440 max=0.002369 Jy/beam
! Clean residual mean=-0.000002 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.35877 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 109 components and 0.35877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074690Jy  sigma=0.445538
! Fit after  self-cal, rms=0.074672Jy  sigma=0.445507
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.34831e-05 Jy
! Component: 100  -  total flux cleaned = -8.775e-05 Jy
! Component: 150  -  total flux cleaned = -0.000180506 Jy
! Component: 200  -  total flux cleaned = -0.000263073 Jy
! Total flux subtracted in 200 components = -0.000263073 Jy
! Clean residual min=-0.002332 max=0.002417 Jy/beam
! Clean residual mean=-0.000002 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.358507 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 116 components and 0.358507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074685Jy  sigma=0.445510
! Fit after  self-cal, rms=0.074673Jy  sigma=0.445489
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.063 mas, bmaj=7.276 mas, bpa=-5.642 degrees
! Estimated noise=1.29958 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.063 x 7.276 at -5.642 degrees (North through East)
! Clean map  min=-0.0025729  max=0.21945 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.675 mas, bmaj=6.699 mas, bpa=-6.81 degrees
! Estimated noise=1.6238 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.177611 Jy
! Component: 100  -  total flux cleaned = 0.244486 Jy
! Component: 150  -  total flux cleaned = 0.281325 Jy
! Component: 200  -  total flux cleaned = 0.304737 Jy
! Total flux subtracted in 200 components = 0.304737 Jy
! Clean residual min=-0.006908 max=0.012564 Jy/beam
! Clean residual mean=-0.000005 rms=0.001818 Jy/beam
! Combined flux in latest and established models = 0.304737 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 0.304737 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.063 mas, bmaj=7.276 mas, bpa=-5.642 degrees
! Estimated noise=1.29958 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0186648 Jy
! Component: 100  -  total flux cleaned = 0.030286 Jy
! Component: 150  -  total flux cleaned = 0.0377773 Jy
! Component: 200  -  total flux cleaned = 0.0427737 Jy
! Total flux subtracted in 200 components = 0.0427737 Jy
! Clean residual min=-0.003146 max=0.003477 Jy/beam
! Clean residual mean=-0.000003 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.347511 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 74 components and 0.347511 Jy
! Inverting map 
! Added new window around map position (3.5, -2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00369259 Jy
! Component: 100  -  total flux cleaned = 0.00528884 Jy
! Component: 150  -  total flux cleaned = 0.00648307 Jy
! Component: 200  -  total flux cleaned = 0.00723782 Jy
! Total flux subtracted in 200 components = 0.00723782 Jy
! Clean residual min=-0.002869 max=0.002542 Jy/beam
! Clean residual mean=-0.000002 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 0.354749 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 95 components and 0.354749 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.9 mas, bmaj=10.56 mas, bpa=-2.491 degrees
! Estimated noise=1.66234 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00177862 Jy
! Component: 100  -  total flux cleaned = 0.00279763 Jy
! Component: 150  -  total flux cleaned = 0.00320884 Jy
! Component: 200  -  total flux cleaned = 0.00337236 Jy
! Total flux subtracted in 200 components = 0.00337236 Jy
! Clean residual min=-0.002090 max=0.002152 Jy/beam
! Clean residual mean=-0.000001 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.358121 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000208943 Jy
! Component: 100  -  total flux cleaned = 0.000375264 Jy
! Component: 150  -  total flux cleaned = 0.000554458 Jy
! Component: 200  -  total flux cleaned = 0.000697233 Jy
! Total flux subtracted in 200 components = 0.000697233 Jy
! Clean residual min=-0.002055 max=0.002084 Jy/beam
! Clean residual mean=-0.000001 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.358818 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 115 components and 0.358818 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.063 mas, bmaj=7.276 mas, bpa=-5.642 degrees
! Estimated noise=1.29958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00149531 Jy
! Component: 100  -  total flux cleaned = -0.00168396 Jy
! Component: 150  -  total flux cleaned = -0.00174409 Jy
! Component: 200  -  total flux cleaned = -0.00185256 Jy
! Total flux subtracted in 200 components = -0.00185256 Jy
! Clean residual min=-0.002580 max=0.002525 Jy/beam
! Clean residual mean=-0.000001 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.356966 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 124 components and 0.356966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074528Jy  sigma=0.444851
! Fit after  self-cal, rms=0.074491Jy  sigma=0.444555
wmodel J1922+0841_S_map.mod
! Writing 124 model components to file: J1922+0841_S_map.mod
wobs   J1922+0841_S_uvs.fits
! Writing UV FITS file: J1922+0841_S_uvs.fits
wwins  J1922+0841_S_map.win
! wwins: Wrote 3 windows to J1922+0841_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000421892 Jy
! Component: 100  -  total flux cleaned = -0.000593086 Jy
! Component: 150  -  total flux cleaned = -0.000510945 Jy
! Component: 200  -  total flux cleaned = -0.000586538 Jy
! Component: 250  -  total flux cleaned = -0.000512372 Jy
! Component: 300  -  total flux cleaned = -0.00058419 Jy
! Component: 350  -  total flux cleaned = -0.00068817 Jy
! Component: 400  -  total flux cleaned = -0.000620334 Jy
! Component: 450  -  total flux cleaned = -0.000652912 Jy
! Component: 500  -  total flux cleaned = -0.000684278 Jy
! Component: 550  -  total flux cleaned = -0.000683745 Jy
! Component: 600  -  total flux cleaned = -0.000683892 Jy
! Component: 650  -  total flux cleaned = -0.000744446 Jy
! Component: 700  -  total flux cleaned = -0.000833082 Jy
! Component: 750  -  total flux cleaned = -0.00100701 Jy
! Component: 800  -  total flux cleaned = -0.000978327 Jy
! Component: 850  -  total flux cleaned = -0.00103429 Jy
! Component: 900  -  total flux cleaned = -0.00111668 Jy
! Component: 950  -  total flux cleaned = -0.00127798 Jy
! Component: 1000  -  total flux cleaned = -0.00135621 Jy
! Component: 1050  -  total flux cleaned = -0.00135608 Jy
! Component: 1100  -  total flux cleaned = -0.00143328 Jy
! Component: 1150  -  total flux cleaned = -0.00145778 Jy
! Component: 1200  -  total flux cleaned = -0.00145749 Jy
! Component: 1250  -  total flux cleaned = -0.00145745 Jy
! Component: 1300  -  total flux cleaned = -0.00143309 Jy
! Component: 1350  -  total flux cleaned = -0.00150477 Jy
! Component: 1400  -  total flux cleaned = -0.00152796 Jy
! Component: 1450  -  total flux cleaned = -0.00159665 Jy
! Component: 1500  -  total flux cleaned = -0.00152765 Jy
! Component: 1550  -  total flux cleaned = -0.00148244 Jy
! Component: 1600  -  total flux cleaned = -0.00159384 Jy
! Component: 1650  -  total flux cleaned = -0.00161571 Jy
! Component: 1700  -  total flux cleaned = -0.00170322 Jy
! Component: 1750  -  total flux cleaned = -0.00174637 Jy
! Component: 1800  -  total flux cleaned = -0.00183148 Jy
! Component: 1850  -  total flux cleaned = -0.00197826 Jy
! Component: 1900  -  total flux cleaned = -0.00199893 Jy
! Component: 1950  -  total flux cleaned = -0.00208071 Jy
! Component: 2000  -  total flux cleaned = -0.00210122 Jy
! Component: 2050  -  total flux cleaned = -0.00216172 Jy
! Component: 2100  -  total flux cleaned = -0.00224098 Jy
! Component: 2150  -  total flux cleaned = -0.00233912 Jy
! Component: 2200  -  total flux cleaned = -0.0023584 Jy
! Component: 2250  -  total flux cleaned = -0.002416 Jy
! Component: 2300  -  total flux cleaned = -0.00245427 Jy
! Component: 2350  -  total flux cleaned = -0.00256707 Jy
! Component: 2400  -  total flux cleaned = -0.00258567 Jy
! Component: 2450  -  total flux cleaned = -0.00264099 Jy
! Component: 2500  -  total flux cleaned = -0.00269575 Jy
! Component: 2550  -  total flux cleaned = -0.0027682 Jy
! Component: 2600  -  total flux cleaned = -0.00284008 Jy
! Component: 2650  -  total flux cleaned = -0.00291113 Jy
! Component: 2700  -  total flux cleaned = -0.00299904 Jy
! Component: 2750  -  total flux cleaned = -0.00313835 Jy
! Component: 2800  -  total flux cleaned = -0.00319018 Jy
! Component: 2850  -  total flux cleaned = -0.0032415 Jy
! Component: 2900  -  total flux cleaned = -0.00322474 Jy
! Component: 2950  -  total flux cleaned = -0.00325845 Jy
! Component: 3000  -  total flux cleaned = -0.00337539 Jy
! Component: 3050  -  total flux cleaned = -0.00340848 Jy
! Component: 3100  -  total flux cleaned = -0.00345751 Jy
! Component: 3150  -  total flux cleaned = -0.00350645 Jy
! Component: 3200  -  total flux cleaned = -0.00357077 Jy
! Component: 3250  -  total flux cleaned = -0.00360243 Jy
! Component: 3300  -  total flux cleaned = -0.00363405 Jy
! Component: 3350  -  total flux cleaned = -0.00369666 Jy
! Component: 3400  -  total flux cleaned = -0.00368108 Jy
! Component: 3450  -  total flux cleaned = -0.00374297 Jy
! Component: 3500  -  total flux cleaned = -0.00380425 Jy
! Component: 3550  -  total flux cleaned = -0.00385016 Jy
! Component: 3600  -  total flux cleaned = -0.00394085 Jy
! Component: 3650  -  total flux cleaned = -0.00389611 Jy
! Component: 3700  -  total flux cleaned = -0.00397056 Jy
! Component: 3750  -  total flux cleaned = -0.00401515 Jy
! Component: 3800  -  total flux cleaned = -0.00395653 Jy
! Component: 3850  -  total flux cleaned = -0.0041023 Jy
! Component: 3900  -  total flux cleaned = -0.00414564 Jy
! Component: 3950  -  total flux cleaned = -0.00417415 Jy
! Component: 4000  -  total flux cleaned = -0.00420271 Jy
! Component: 4050  -  total flux cleaned = -0.00421688 Jy
! Total flux subtracted in 4096 components = -0.00424498 Jy
! Clean residual min=-0.000909 max=0.000937 Jy/beam
! Clean residual mean=-0.000001 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.352721 Jy
keep
! Adding 267 model components to the UV plane model.
! The established model now contains 391 components and 0.352721 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1922+0841_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.063 x 7.276 at -5.642 degrees (North through East)
! Clean map  min=-0.0019123  max=0.22104 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1922+0841_S_map.fits
wmodel /image_prod/ug002_uva//J1922+0841_S_map.mod
! Writing 391 model components to file: /image_prod/ug002_uva//J1922+0841_S_map.mod
wobs   /image_prod/ug002_uva//J1922+0841_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1922+0841_S_uvs.fits
wwins  /image_prod/ug002_uva//J1922+0841_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1922+0841_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.22104 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00024428 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.331542 0.331542 0.663085 1.32617 2.65234 5.30468 10.6094 21.2187 42.4374 84.8748
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.221 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  904.861 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1922+0841_S_dfm.log closed on Thu Mar  5 04:08:48 2020