! Started logfile: /image_prod/ug002_uva//J1911-2006_X_k_dfm.log on Thu Mar 5 04:04:42 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1911-2006_X_k_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1911-2006_X_k_uva.fits ! AN table 1: 34 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.879902 visibilities/baseline/integration-bin. ! Found source: J1911-2006 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 12924 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1911-2006_X_k] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.806417Jy sigma=8.140704 ! Fit after self-cal, rms=1.619752Jy sigma=4.647454 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5947 mas, bmaj=1.517 mas, bpa=-1.46 degrees ! Estimated noise=3.25736 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.96297 Jy ! Component: 100 - total flux cleaned = 2.40866 Jy ! Total flux subtracted in 100 components = 2.40866 Jy ! Clean residual min=-0.065538 max=0.161541 Jy/beam ! Clean residual mean=-0.000018 rms=0.011116 Jy/beam ! Combined flux in latest and established models = 2.40866 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 2.40866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.289739Jy sigma=0.823211 ! Fit after self-cal, rms=0.289597Jy sigma=0.823118 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.168739 Jy ! Component: 100 - total flux cleaned = 0.248507 Jy ! Total flux subtracted in 100 components = 0.248507 Jy ! Clean residual min=-0.039536 max=0.052926 Jy/beam ! Clean residual mean=-0.000002 rms=0.005730 Jy/beam ! Combined flux in latest and established models = 2.65717 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 2.65717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.142331Jy sigma=0.432702 ! Fit after self-cal, rms=0.141220Jy sigma=0.429665 ! Inverting map ! Added new window around map position (-0.8, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0503261 Jy ! Component: 100 - total flux cleaned = 0.0734725 Jy ! Total flux subtracted in 100 components = 0.0734725 Jy ! Clean residual min=-0.031608 max=0.038819 Jy/beam ! Clean residual mean=0.000003 rms=0.004903 Jy/beam ! Combined flux in latest and established models = 2.73064 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 15 components and 2.73064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125928Jy sigma=0.390881 ! Fit after self-cal, rms=0.124861Jy sigma=0.388424 ! Inverting map ! Added new window around map position (0.8, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0267902 Jy ! Component: 100 - total flux cleaned = 0.0309494 Jy ! Total flux subtracted in 100 components = 0.0309494 Jy ! Clean residual min=-0.028270 max=0.025117 Jy/beam ! Clean residual mean=0.000005 rms=0.004473 Jy/beam ! Combined flux in latest and established models = 2.76159 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 2.76159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.120250Jy sigma=0.374268 ! Fit after self-cal, rms=0.120145Jy sigma=0.373843 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7825 mas, bmaj=1.811 mas, bpa=-1.584 degrees ! Estimated noise=2.25903 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0149807 Jy ! Component: 100 - total flux cleaned = -0.018872 Jy ! Component: 150 - total flux cleaned = -0.0196351 Jy ! Component: 200 - total flux cleaned = -0.0196324 Jy ! Total flux subtracted in 200 components = -0.0196324 Jy ! Clean residual min=-0.021975 max=0.017763 Jy/beam ! Clean residual mean=0.000013 rms=0.003642 Jy/beam ! Combined flux in latest and established models = 2.74196 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 2.74196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116490Jy sigma=0.361946 ! Fit after self-cal, rms=0.116358Jy sigma=0.361436 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7825 x 1.811 at -1.584 degrees (North through East) ! Clean map min=-0.020649 max=2.5539 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 KP 0.99 LA 1.02 ! MK 1.00 NL 0.97 OV 1.01 PT 0.99 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 KP 1.00 LA 1.03 ! MK 1.00 NL 0.97 OV 1.00 PT 0.99 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 KP 1.00 LA 1.02 ! MK 1.01 NL 1.02 OV 1.00 PT 0.98 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 KP 0.99 LA 1.03 ! MK 1.02 NL 0.96 OV 1.01 PT 0.99 ! SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 KP 0.99 LA 1.03 ! MK 0.99 NL 0.97 OV 1.00 PT 1.00 ! SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 KP 1.01 LA 1.02 ! MK 0.99 NL 0.99 OV 1.02 PT 1.00 ! SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 KP 1.00 LA 1.03 ! MK 1.01 NL 1.00 OV 1.00 PT 1.00 ! SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 KP 0.99 LA 1.02 ! MK 1.02 NL 1.03 OV 0.96 PT 1.01 ! SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 KP 1.00 LA 1.00 ! MK 1.03 NL 0.99 OV 0.99 PT 1.03 ! SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 KP 0.99 LA 1.03 ! MK 1.00 NL 0.96 OV 1.02 PT 1.00 ! SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 KP 0.99 LA 1.01 ! MK 0.99 NL 1.03 OV 0.99 PT 1.01 ! SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 KP 1.00 LA 1.02 ! MK 1.00 NL 1.01 OV 1.01 PT 0.98 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.116358Jy sigma=0.361436 ! Fit after self-cal, rms=0.100877Jy sigma=0.305905 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7822 mas, bmaj=1.81 mas, bpa=-1.502 degrees ! Estimated noise=2.25934 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012183 Jy ! Component: 100 - total flux cleaned = 0.013823 Jy ! Component: 150 - total flux cleaned = 0.0155905 Jy ! Component: 200 - total flux cleaned = 0.0178334 Jy ! Total flux subtracted in 200 components = 0.0178334 Jy ! Clean residual min=-0.017690 max=0.013982 Jy/beam ! Clean residual mean=-0.000001 rms=0.002826 Jy/beam ! Combined flux in latest and established models = 2.75979 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 48 components and 2.75979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095929Jy sigma=0.288445 ! Fit after self-cal, rms=0.095658Jy sigma=0.287433 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095658Jy sigma=0.287433 ! Fit after self-cal, rms=0.086160Jy sigma=0.258338 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7824 mas, bmaj=1.814 mas, bpa=-1.54 degrees ! Estimated noise=2.26123 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00809505 Jy ! Component: 100 - total flux cleaned = 0.00923734 Jy ! Component: 150 - total flux cleaned = 0.00999961 Jy ! Component: 200 - total flux cleaned = 0.010447 Jy ! Total flux subtracted in 200 components = 0.010447 Jy ! Clean residual min=-0.012141 max=0.009694 Jy/beam ! Clean residual mean=-0.000011 rms=0.002016 Jy/beam ! Combined flux in latest and established models = 2.77024 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 2.77024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084337Jy sigma=0.252407 ! Fit after self-cal, rms=0.084324Jy sigma=0.252207 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000971114 Jy ! Component: 100 - total flux cleaned = 0.00157082 Jy ! Component: 150 - total flux cleaned = 0.00194382 Jy ! Component: 200 - total flux cleaned = 0.0024514 Jy ! Total flux subtracted in 200 components = 0.0024514 Jy ! Clean residual min=-0.012119 max=0.009344 Jy/beam ! Clean residual mean=-0.000010 rms=0.001964 Jy/beam ! Combined flux in latest and established models = 2.77269 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 2.77269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083638Jy sigma=0.249918 ! Fit after self-cal, rms=0.083637Jy sigma=0.249840 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083637Jy sigma=0.249840 ! Fit after self-cal, rms=0.076164Jy sigma=0.228529 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7827 mas, bmaj=1.816 mas, bpa=-1.539 degrees ! Estimated noise=2.26228 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168952 Jy ! Component: 100 - total flux cleaned = 0.00206645 Jy ! Component: 150 - total flux cleaned = 0.00240786 Jy ! Component: 200 - total flux cleaned = 0.00240733 Jy ! Total flux subtracted in 200 components = 0.00240733 Jy ! Clean residual min=-0.006658 max=0.008262 Jy/beam ! Clean residual mean=-0.000009 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 2.7751 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 73 components and 2.7751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075315Jy sigma=0.225822 ! Fit after self-cal, rms=0.075287Jy sigma=0.225694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.6, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00777223 Jy ! Component: 100 - total flux cleaned = 0.0113266 Jy ! Component: 150 - total flux cleaned = 0.0131162 Jy ! Component: 200 - total flux cleaned = 0.0140363 Jy ! Total flux subtracted in 200 components = 0.0140363 Jy ! Clean residual min=-0.006276 max=0.006534 Jy/beam ! Clean residual mean=-0.000009 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 2.78914 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 87 components and 2.78914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074191Jy sigma=0.223251 ! Fit after self-cal, rms=0.074120Jy sigma=0.223118 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074120Jy sigma=0.223118 ! Fit after self-cal, rms=0.073895Jy sigma=0.222554 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.252 mas, bmaj=4.348 mas, bpa=-0.05962 degrees ! Estimated noise=3.2472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332917 Jy ! Component: 100 - total flux cleaned = 0.00488145 Jy ! Component: 150 - total flux cleaned = 0.00584965 Jy ! Component: 200 - total flux cleaned = 0.00654975 Jy ! Total flux subtracted in 200 components = 0.00654975 Jy ! Clean residual min=-0.006620 max=0.009110 Jy/beam ! Clean residual mean=-0.000021 rms=0.001720 Jy/beam ! Combined flux in latest and established models = 2.79569 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 90 components and 2.79569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073670Jy sigma=0.222118 ! Fit after self-cal, rms=0.073639Jy sigma=0.222011 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.6, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00809187 Jy ! Component: 100 - total flux cleaned = 0.0124063 Jy ! Component: 150 - total flux cleaned = 0.0144227 Jy ! Component: 200 - total flux cleaned = 0.015812 Jy ! Total flux subtracted in 200 components = 0.015812 Jy ! Clean residual min=-0.005285 max=0.006070 Jy/beam ! Clean residual mean=-0.000014 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 2.8115 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 123 components and 2.8115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073179Jy sigma=0.221312 ! Fit after self-cal, rms=0.073143Jy sigma=0.221199 ! Inverting map ! Added new window around map position (22.2, -23.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049904 Jy ! Component: 100 - total flux cleaned = 0.0062272 Jy ! Component: 150 - total flux cleaned = 0.00655632 Jy ! Component: 200 - total flux cleaned = 0.00664803 Jy ! Total flux subtracted in 200 components = 0.00664803 Jy ! Clean residual min=-0.004586 max=0.005650 Jy/beam ! Clean residual mean=-0.000011 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 2.81815 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 148 components and 2.81815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072789Jy sigma=0.220348 ! Fit after self-cal, rms=0.072773Jy sigma=0.220303 ! Inverting map ! Added new window around map position (13.4, 15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00292978 Jy ! Component: 100 - total flux cleaned = 0.00360646 Jy ! Component: 150 - total flux cleaned = 0.00457995 Jy ! Component: 200 - total flux cleaned = 0.00527592 Jy ! Total flux subtracted in 200 components = 0.00527592 Jy ! Clean residual min=-0.003606 max=0.004225 Jy/beam ! Clean residual mean=-0.000011 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 2.82342 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 175 components and 2.82342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072580Jy sigma=0.219872 ! Fit after self-cal, rms=0.072566Jy sigma=0.219800 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7829 mas, bmaj=1.818 mas, bpa=-1.522 degrees ! Estimated noise=2.26283 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7829 x 1.818 at -1.522 degrees (North through East) ! Clean map min=-0.0057256 max=2.5537 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072566Jy sigma=0.219800 ! Fit after self-cal, rms=0.066380Jy sigma=0.188003 ! Inverting map and beam ! Estimated beam: bmin=0.7832 mas, bmaj=1.818 mas, bpa=-1.5 degrees ! Estimated noise=2.26313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00201858 Jy ! Component: 100 - total flux cleaned = -0.00201926 Jy ! Component: 150 - total flux cleaned = -0.00105736 Jy ! Component: 200 - total flux cleaned = -0.000926854 Jy ! Total flux subtracted in 200 components = -0.000926854 Jy ! Clean residual min=-0.005307 max=0.005283 Jy/beam ! Clean residual mean=-0.000004 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 2.82249 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 202 components and 2.82249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065833Jy sigma=0.186275 ! Fit after self-cal, rms=0.065817Jy sigma=0.186249 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000622118 Jy ! Component: 100 - total flux cleaned = 0.000631508 Jy ! Component: 150 - total flux cleaned = 0.00142047 Jy ! Component: 200 - total flux cleaned = 0.00163601 Jy ! Total flux subtracted in 200 components = 0.00163601 Jy ! Clean residual min=-0.004984 max=0.004963 Jy/beam ! Clean residual mean=-0.000004 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 2.82413 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 219 components and 2.82413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065486Jy sigma=0.185213 ! Fit after self-cal, rms=0.065483Jy sigma=0.185201 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065483Jy sigma=0.185201 ! Fit after self-cal, rms=0.065380Jy sigma=0.185097 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5958 mas, bmaj=1.523 mas, bpa=-1.476 degrees ! Estimated noise=3.26482 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.96739 Jy ! Component: 100 - total flux cleaned = 2.41174 Jy ! Component: 150 - total flux cleaned = 2.57826 Jy ! Component: 200 - total flux cleaned = 2.65689 Jy ! Total flux subtracted in 200 components = 2.65689 Jy ! Clean residual min=-0.037859 max=0.038866 Jy/beam ! Clean residual mean=-0.000009 rms=0.004225 Jy/beam ! Combined flux in latest and established models = 2.6569 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 2.6569 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7832 mas, bmaj=1.818 mas, bpa=-1.498 degrees ! Estimated noise=2.2631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.053552 Jy ! Component: 100 - total flux cleaned = 0.0831589 Jy ! Component: 150 - total flux cleaned = 0.0910655 Jy ! Component: 200 - total flux cleaned = 0.0975216 Jy ! Total flux subtracted in 200 components = 0.0975216 Jy ! Clean residual min=-0.011244 max=0.015617 Jy/beam ! Clean residual mean=-0.000015 rms=0.002053 Jy/beam ! Combined flux in latest and established models = 2.75442 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 34 components and 2.75442 Jy ! Inverting map ! Added new window around map position (-2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118457 Jy ! Component: 100 - total flux cleaned = 0.0195969 Jy ! Component: 150 - total flux cleaned = 0.0253688 Jy ! Component: 200 - total flux cleaned = 0.0296915 Jy ! Total flux subtracted in 200 components = 0.0296915 Jy ! Clean residual min=-0.009676 max=0.008997 Jy/beam ! Clean residual mean=-0.000009 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 2.78411 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 61 components and 2.78411 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.252 mas, bmaj=4.348 mas, bpa=-0.03377 degrees ! Estimated noise=3.24621 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116016 Jy ! Component: 100 - total flux cleaned = 0.019778 Jy ! Component: 150 - total flux cleaned = 0.0250102 Jy ! Component: 200 - total flux cleaned = 0.0292589 Jy ! Total flux subtracted in 200 components = 0.0292589 Jy ! Clean residual min=-0.005176 max=0.005358 Jy/beam ! Clean residual mean=-0.000011 rms=0.001474 Jy/beam ! Combined flux in latest and established models = 2.81337 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388604 Jy ! Component: 100 - total flux cleaned = 0.00727681 Jy ! Component: 150 - total flux cleaned = 0.00967199 Jy ! Component: 200 - total flux cleaned = 0.0114204 Jy ! Total flux subtracted in 200 components = 0.0114204 Jy ! Clean residual min=-0.004262 max=0.004057 Jy/beam ! Clean residual mean=-0.000007 rms=0.001215 Jy/beam ! Combined flux in latest and established models = 2.82479 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 131 components and 2.82479 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7832 mas, bmaj=1.818 mas, bpa=-1.498 degrees ! Estimated noise=2.2631 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.29894e-05 Jy ! Component: 100 - total flux cleaned = 0.00117473 Jy ! Component: 150 - total flux cleaned = 0.00141896 Jy ! Component: 200 - total flux cleaned = 0.00231255 Jy ! Total flux subtracted in 200 components = 0.00231255 Jy ! Clean residual min=-0.006636 max=0.005545 Jy/beam ! Clean residual mean=-0.000003 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 2.8271 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 156 components and 2.8271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067585Jy sigma=0.193491 ! Fit after self-cal, rms=0.067290Jy sigma=0.192088 wmodel J1911-2006_X_k_map.mod ! Writing 156 model components to file: J1911-2006_X_k_map.mod wobs J1911-2006_X_k_uvs.fits ! Writing UV FITS file: J1911-2006_X_k_uvs.fits wwins J1911-2006_X_k_map.win ! wwins: Wrote 9 windows to J1911-2006_X_k_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129128 Jy ! Component: 100 - total flux cleaned = -0.00254731 Jy ! Component: 150 - total flux cleaned = -0.00345468 Jy ! Component: 200 - total flux cleaned = -0.0041435 Jy ! Component: 250 - total flux cleaned = -0.004801 Jy ! Component: 300 - total flux cleaned = -0.0051156 Jy ! Component: 350 - total flux cleaned = -0.00541759 Jy ! Component: 400 - total flux cleaned = -0.00548964 Jy ! Component: 450 - total flux cleaned = -0.00570276 Jy ! Component: 500 - total flux cleaned = -0.00570175 Jy ! Component: 550 - total flux cleaned = -0.00563571 Jy ! Component: 600 - total flux cleaned = -0.00577069 Jy ! Component: 650 - total flux cleaned = -0.00583524 Jy ! Component: 700 - total flux cleaned = -0.00577156 Jy ! Component: 750 - total flux cleaned = -0.00570861 Jy ! Component: 800 - total flux cleaned = -0.00552464 Jy ! Component: 850 - total flux cleaned = -0.00534459 Jy ! Component: 900 - total flux cleaned = -0.00528557 Jy ! Component: 950 - total flux cleaned = -0.00505451 Jy ! Component: 1000 - total flux cleaned = -0.00499921 Jy ! Component: 1050 - total flux cleaned = -0.00488778 Jy ! Component: 1100 - total flux cleaned = -0.00477688 Jy ! Component: 1150 - total flux cleaned = -0.00445171 Jy ! Component: 1200 - total flux cleaned = -0.00445189 Jy ! Component: 1250 - total flux cleaned = -0.00424069 Jy ! Component: 1300 - total flux cleaned = -0.0041372 Jy ! Component: 1350 - total flux cleaned = -0.00393201 Jy ! Component: 1400 - total flux cleaned = -0.00373035 Jy ! Component: 1450 - total flux cleaned = -0.00353164 Jy ! Component: 1500 - total flux cleaned = -0.00333542 Jy ! Component: 1550 - total flux cleaned = -0.00328758 Jy ! Component: 1600 - total flux cleaned = -0.00309566 Jy ! Component: 1650 - total flux cleaned = -0.00286044 Jy ! Component: 1700 - total flux cleaned = -0.00262909 Jy ! Component: 1750 - total flux cleaned = -0.00240099 Jy ! Component: 1800 - total flux cleaned = -0.00235633 Jy ! Component: 1850 - total flux cleaned = -0.00222236 Jy ! Component: 1900 - total flux cleaned = -0.00217804 Jy ! Component: 1950 - total flux cleaned = -0.00208993 Jy ! Component: 2000 - total flux cleaned = -0.00187391 Jy ! Component: 2050 - total flux cleaned = -0.00174679 Jy ! Component: 2100 - total flux cleaned = -0.00153632 Jy ! Component: 2150 - total flux cleaned = -0.00153652 Jy ! Component: 2200 - total flux cleaned = -0.00149454 Jy ! Component: 2250 - total flux cleaned = -0.00141326 Jy ! Component: 2300 - total flux cleaned = -0.00125198 Jy ! Component: 2350 - total flux cleaned = -0.0010915 Jy ! Component: 2400 - total flux cleaned = -0.000973414 Jy ! Component: 2450 - total flux cleaned = -0.000816194 Jy ! Component: 2500 - total flux cleaned = -0.00066136 Jy ! Component: 2550 - total flux cleaned = -0.000584285 Jy ! Component: 2600 - total flux cleaned = -0.000317843 Jy ! Component: 2650 - total flux cleaned = -0.000167625 Jy ! Component: 2700 - total flux cleaned = -5.57649e-05 Jy ! Component: 2750 - total flux cleaned = 0.000166422 Jy ! Component: 2800 - total flux cleaned = 0.000276551 Jy ! Component: 2850 - total flux cleaned = 0.000421748 Jy ! Component: 2900 - total flux cleaned = 0.000493659 Jy ! Component: 2950 - total flux cleaned = 0.000743295 Jy ! Component: 3000 - total flux cleaned = 0.000919901 Jy ! Component: 3050 - total flux cleaned = 0.000955497 Jy ! Component: 3100 - total flux cleaned = 0.00112906 Jy ! Component: 3150 - total flux cleaned = 0.0011979 Jy ! Component: 3200 - total flux cleaned = 0.00143691 Jy ! Component: 3250 - total flux cleaned = 0.00153843 Jy ! Component: 3300 - total flux cleaned = 0.00167272 Jy ! Component: 3350 - total flux cleaned = 0.00183905 Jy ! Component: 3400 - total flux cleaned = 0.00203703 Jy ! Component: 3450 - total flux cleaned = 0.00213495 Jy ! Component: 3500 - total flux cleaned = 0.00229725 Jy ! Component: 3550 - total flux cleaned = 0.00249036 Jy ! Component: 3600 - total flux cleaned = 0.00258625 Jy ! Component: 3650 - total flux cleaned = 0.00271283 Jy ! Component: 3700 - total flux cleaned = 0.00280713 Jy ! Component: 3750 - total flux cleaned = 0.00302528 Jy ! Component: 3800 - total flux cleaned = 0.00305635 Jy ! Component: 3850 - total flux cleaned = 0.00317914 Jy ! Component: 3900 - total flux cleaned = 0.00333186 Jy ! Component: 3950 - total flux cleaned = 0.00342221 Jy ! Component: 4000 - total flux cleaned = 0.00351218 Jy ! Component: 4050 - total flux cleaned = 0.00363121 Jy ! Total flux subtracted in 4096 components = 0.0038383 Jy ! Clean residual min=-0.001722 max=0.001472 Jy/beam ! Clean residual mean=-0.000003 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 2.83094 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 426 components and 2.83094 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1911-2006_X_k_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7832 x 1.818 at -1.498 degrees (North through East) ! Clean map min=-0.0034207 max=2.5493 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1911-2006_X_k_map.fits wmodel /image_prod/ug002_uva//J1911-2006_X_k_map.mod ! Writing 426 model components to file: /image_prod/ug002_uva//J1911-2006_X_k_map.mod wobs /image_prod/ug002_uva//J1911-2006_X_k_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1911-2006_X_k_uvs.fits wwins /image_prod/ug002_uva//J1911-2006_X_k_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J1911-2006_X_k_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 2.54927 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000480925 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0565955 0.0565955 0.113191 0.226382 0.452764 0.905529 1.81106 3.62211 7.24423 14.4885 28.9769 57.9538 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.549 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 5300.77 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1911-2006_X_k_dfm.log closed on Thu Mar 5 04:04:47 2020