! Started logfile: /image_prod/ug002_uva//J1903+0145_X_dfm.log on Thu Mar  5 04:01:30 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1903+0145_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1903+0145_X_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.918889 visibilities/baseline/integration-bin.
! Found source: J1903+0145
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29772 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1903+0145_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 25 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005873Jy  sigma=8.776646
! Fit after  self-cal, rms=0.922183Jy  sigma=8.028738
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6745 mas, bmaj=1.721 mas, bpa=-6.561 degrees
! Estimated noise=0.994083 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0535717 Jy
! Component: 100  -  total flux cleaned = 0.0749032 Jy
! Total flux subtracted in 100 components = 0.0749032 Jy
! Clean residual min=-0.004656 max=0.010092 Jy/beam
! Clean residual mean=0.000001 rms=0.001221 Jy/beam
! Combined flux in latest and established models = 0.0749032 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0749032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067851Jy  sigma=0.547147
! Fit after  self-cal, rms=0.067301Jy  sigma=0.542420
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126307 Jy
! Component: 100  -  total flux cleaned = 0.0199592 Jy
! Total flux subtracted in 100 components = 0.0199592 Jy
! Clean residual min=-0.003839 max=0.006672 Jy/beam
! Clean residual mean=0.000001 rms=0.000906 Jy/beam
! Combined flux in latest and established models = 0.0948624 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 0.0948624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063357Jy  sigma=0.501808
! Fit after  self-cal, rms=0.063322Jy  sigma=0.501465
! Inverting map 
! Added new window around map position (-2.4, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00671511 Jy
! Component: 100  -  total flux cleaned = 0.0112751 Jy
! Total flux subtracted in 100 components = 0.0112751 Jy
! Clean residual min=-0.003685 max=0.003878 Jy/beam
! Clean residual mean=0.000000 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.106138 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 32 components and 0.106138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061998Jy  sigma=0.487976
! Fit after  self-cal, rms=0.061940Jy  sigma=0.487433
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8478 mas, bmaj=2.006 mas, bpa=-6.12 degrees
! Estimated noise=0.479 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, -0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00826361 Jy
! Component: 100  -  total flux cleaned = 0.0135699 Jy
! Component: 150  -  total flux cleaned = 0.0174102 Jy
! Component: 200  -  total flux cleaned = 0.0202779 Jy
! Total flux subtracted in 200 components = 0.0202779 Jy
! Clean residual min=-0.003059 max=0.003588 Jy/beam
! Clean residual mean=-0.000000 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 0.126415 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 80 components and 0.126415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060720Jy  sigma=0.474414
! Fit after  self-cal, rms=0.060662Jy  sigma=0.473780
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8478 x 2.006 at -6.12 degrees (North through East)
! Clean map  min=-0.0029271  max=0.076959 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.96     HN        1.09     KP        1.05     
!   LA        0.99     MK        1.05     NL        1.07     PT        0.88     
!   SC        1.14     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.95     HN        1.04     KP        1.01     
!   LA        1.00     MK        1.01     NL        1.11     PT        0.90     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.99     HN        1.05     KP        1.01     
!   LA        0.97     MK        1.02     NL        1.08     PT        0.89     
!   SC        1.10     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.07     KP        1.04     
!   LA        0.96     MK        1.08     NL        1.05     PT        0.90     
!   SC        1.19     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.01     HN        1.08     KP        1.02     
!   LA        0.94     MK        0.98     NL        1.07     PT        0.90     
!   SC        1.06     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        1.04     KP        1.06     
!   LA        0.94     MK        0.98     NL        1.07     PT        0.87     
!   SC        1.08     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.07     KP        1.04     
!   LA        0.94     MK        1.01     NL        1.07     PT        0.86     
!   SC        1.07     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.03     KP        1.05     
!   LA        0.94     MK        1.11     NL        1.12     PT        0.88     
!   SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.08     KP        1.03     
!   LA        0.98     MK        1.01     NL        1.02     PT        0.88     
!   SC        1.09     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.13     KP        1.02     
!   LA        0.96     MK        0.98     NL        1.08     PT        0.87     
!   SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.98     HN        1.08     KP        1.05     
!   LA        0.99     MK        0.96     NL        1.06     PT        0.87     
!   SC        1.10     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        0.90     HN        1.03     KP        1.05     
!   LA        0.97     MK        0.95     NL        1.10     PT        0.88     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.060662Jy  sigma=0.473780
! Fit after  self-cal, rms=0.059949Jy  sigma=0.467617
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8618 mas, bmaj=2.028 mas, bpa=-6.253 degrees
! Estimated noise=0.475942 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.28533e-05 Jy
! Component: 100  -  total flux cleaned = 4.51333e-05 Jy
! Component: 150  -  total flux cleaned = 1.10139e-05 Jy
! Component: 200  -  total flux cleaned = -3.94962e-05 Jy
! Total flux subtracted in 200 components = -3.94962e-05 Jy
! Clean residual min=-0.001784 max=0.001990 Jy/beam
! Clean residual mean=0.000001 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.126376 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 90 components and 0.126376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059899Jy  sigma=0.467246
! Fit after  self-cal, rms=0.059923Jy  sigma=0.467089
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059923Jy  sigma=0.467089
! Fit after  self-cal, rms=0.063326Jy  sigma=0.464894
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8578 mas, bmaj=2.03 mas, bpa=-6.414 degrees
! Estimated noise=0.47386 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000177407 Jy
! Component: 100  -  total flux cleaned = 0.000154901 Jy
! Component: 150  -  total flux cleaned = 0.000155779 Jy
! Component: 200  -  total flux cleaned = 0.000122097 Jy
! Total flux subtracted in 200 components = 0.000122097 Jy
! Clean residual min=-0.001429 max=0.001624 Jy/beam
! Clean residual mean=0.000001 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.126498 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 105 components and 0.126498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063312Jy  sigma=0.464743
! Fit after  self-cal, rms=0.063358Jy  sigma=0.464694
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001477 Jy
! Component: 100  -  total flux cleaned = 0.00215904 Jy
! Component: 150  -  total flux cleaned = 0.00252948 Jy
! Component: 200  -  total flux cleaned = 0.0028031 Jy
! Total flux subtracted in 200 components = 0.0028031 Jy
! Clean residual min=-0.001302 max=0.001414 Jy/beam
! Clean residual mean=0.000000 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.129301 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 122 components and 0.129301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063319Jy  sigma=0.464287
! Fit after  self-cal, rms=0.063313Jy  sigma=0.464252
! Inverting map 
! Added new window around map position (-0.6, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146241 Jy
! Component: 100  -  total flux cleaned = 0.0023906 Jy
! Component: 150  -  total flux cleaned = 0.0030594 Jy
! Component: 200  -  total flux cleaned = 0.00361019 Jy
! Total flux subtracted in 200 components = 0.00361019 Jy
! Clean residual min=-0.001168 max=0.001067 Jy/beam
! Clean residual mean=0.000000 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.132911 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 152 components and 0.132911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063272Jy  sigma=0.463827
! Fit after  self-cal, rms=0.063269Jy  sigma=0.463800
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063269Jy  sigma=0.463800
! Fit after  self-cal, rms=0.063729Jy  sigma=0.463721
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8581 mas, bmaj=2.03 mas, bpa=-6.385 degrees
! Estimated noise=0.472213 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000636863 Jy
! Component: 100  -  total flux cleaned = 0.00103254 Jy
! Component: 150  -  total flux cleaned = 0.00135375 Jy
! Component: 200  -  total flux cleaned = 0.00147428 Jy
! Total flux subtracted in 200 components = 0.00147428 Jy
! Clean residual min=-0.001087 max=0.000978 Jy/beam
! Clean residual mean=0.000000 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.134386 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 170 components and 0.134386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063715Jy  sigma=0.463595
! Fit after  self-cal, rms=0.063718Jy  sigma=0.463586
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000273084 Jy
! Component: 100  -  total flux cleaned = 0.000369366 Jy
! Component: 150  -  total flux cleaned = 0.000474138 Jy
! Component: 200  -  total flux cleaned = 0.000572105 Jy
! Total flux subtracted in 200 components = 0.000572105 Jy
! Clean residual min=-0.001055 max=0.000969 Jy/beam
! Clean residual mean=0.000000 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.134958 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 172 components and 0.134958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063711Jy  sigma=0.463525
! Fit after  self-cal, rms=0.063710Jy  sigma=0.463521
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063710Jy  sigma=0.463521
! Fit after  self-cal, rms=0.063880Jy  sigma=0.463506
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.247 mas, bmaj=3.17 mas, bpa=-2.563 degrees
! Estimated noise=0.609288 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000574186 Jy
! Component: 100  -  total flux cleaned = 0.000744329 Jy
! Component: 150  -  total flux cleaned = 0.000892021 Jy
! Component: 200  -  total flux cleaned = 0.00097979 Jy
! Total flux subtracted in 200 components = 0.00097979 Jy
! Clean residual min=-0.000939 max=0.001147 Jy/beam
! Clean residual mean=0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.135937 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 188 components and 0.135937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063875Jy  sigma=0.463466
! Fit after  self-cal, rms=0.063876Jy  sigma=0.463461
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173667 Jy
! Component: 100  -  total flux cleaned = 0.000254467 Jy
! Component: 150  -  total flux cleaned = 0.000316228 Jy
! Component: 200  -  total flux cleaned = 0.000372879 Jy
! Total flux subtracted in 200 components = 0.000372879 Jy
! Clean residual min=-0.000926 max=0.001156 Jy/beam
! Clean residual mean=0.000001 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.13631 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 192 components and 0.13631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063875Jy  sigma=0.463448
! Fit after  self-cal, rms=0.063875Jy  sigma=0.463446
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8581 mas, bmaj=2.029 mas, bpa=-6.36 degrees
! Estimated noise=0.471971 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8581 x 2.029 at -6.36 degrees (North through East)
! Clean map  min=-0.00090491  max=0.07597 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6802 mas, bmaj=1.733 mas, bpa=-6.713 degrees
! Estimated noise=0.991774 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0534123 Jy
! Component: 100  -  total flux cleaned = 0.0754028 Jy
! Component: 150  -  total flux cleaned = 0.0874847 Jy
! Component: 200  -  total flux cleaned = 0.0955259 Jy
! Total flux subtracted in 200 components = 0.0955259 Jy
! Clean residual min=-0.002961 max=0.004534 Jy/beam
! Clean residual mean=0.000001 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.0955259 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0955259 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8581 mas, bmaj=2.029 mas, bpa=-6.36 degrees
! Estimated noise=0.471971 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010116 Jy
! Component: 100  -  total flux cleaned = 0.0161981 Jy
! Component: 150  -  total flux cleaned = 0.0201756 Jy
! Component: 200  -  total flux cleaned = 0.0230155 Jy
! Total flux subtracted in 200 components = 0.0230155 Jy
! Clean residual min=-0.001864 max=0.001864 Jy/beam
! Clean residual mean=-0.000000 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.118541 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 60 components and 0.118541 Jy
! Inverting map 
! Added new window around map position (-4, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00229342 Jy
! Component: 100  -  total flux cleaned = 0.00418445 Jy
! Component: 150  -  total flux cleaned = 0.00580707 Jy
! Component: 200  -  total flux cleaned = 0.00721888 Jy
! Total flux subtracted in 200 components = 0.00721888 Jy
! Clean residual min=-0.001476 max=0.001112 Jy/beam
! Clean residual mean=0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.12576 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 98 components and 0.12576 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.247 mas, bmaj=3.17 mas, bpa=-2.563 degrees
! Estimated noise=0.609288 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00226917 Jy
! Component: 100  -  total flux cleaned = 0.00398409 Jy
! Component: 150  -  total flux cleaned = 0.00533698 Jy
! Component: 200  -  total flux cleaned = 0.0064239 Jy
! Total flux subtracted in 200 components = 0.0064239 Jy
! Clean residual min=-0.001250 max=0.001207 Jy/beam
! Clean residual mean=0.000000 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.132184 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000887195 Jy
! Component: 100  -  total flux cleaned = 0.0016159 Jy
! Component: 150  -  total flux cleaned = 0.00221746 Jy
! Component: 200  -  total flux cleaned = 0.00271555 Jy
! Total flux subtracted in 200 components = 0.00271555 Jy
! Clean residual min=-0.001037 max=0.001158 Jy/beam
! Clean residual mean=0.000000 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.1349 Jy
! Adding 92 model components to the UV plane model.
! The established model now contains 183 components and 0.1349 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8581 mas, bmaj=2.029 mas, bpa=-6.36 degrees
! Estimated noise=0.471971 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000375322 Jy
! Component: 100  -  total flux cleaned = 0.00063276 Jy
! Component: 150  -  total flux cleaned = 0.000805101 Jy
! Component: 200  -  total flux cleaned = 0.000926848 Jy
! Total flux subtracted in 200 components = 0.000926848 Jy
! Clean residual min=-0.000922 max=0.000900 Jy/beam
! Clean residual mean=0.000000 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.135827 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 202 components and 0.135827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063878Jy  sigma=0.463399
! Fit after  self-cal, rms=0.063872Jy  sigma=0.463346
wmodel J1903+0145_X_map.mod
! Writing 202 model components to file: J1903+0145_X_map.mod
wobs   J1903+0145_X_uvs.fits
! Writing UV FITS file: J1903+0145_X_uvs.fits
wwins  J1903+0145_X_map.win
! wwins: Wrote 6 windows to J1903+0145_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102589 Jy
! Component: 100  -  total flux cleaned = 0.00014978 Jy
! Component: 150  -  total flux cleaned = 0.000164937 Jy
! Component: 200  -  total flux cleaned = 0.000193506 Jy
! Component: 250  -  total flux cleaned = 0.000220977 Jy
! Component: 300  -  total flux cleaned = 0.000180265 Jy
! Component: 350  -  total flux cleaned = 0.000127393 Jy
! Component: 400  -  total flux cleaned = 0.000127429 Jy
! Component: 450  -  total flux cleaned = 0.000127375 Jy
! Component: 500  -  total flux cleaned = 0.000139763 Jy
! Component: 550  -  total flux cleaned = 0.000163952 Jy
! Component: 600  -  total flux cleaned = 0.000175802 Jy
! Component: 650  -  total flux cleaned = 0.000163958 Jy
! Component: 700  -  total flux cleaned = 0.000175537 Jy
! Component: 750  -  total flux cleaned = 0.000163941 Jy
! Component: 800  -  total flux cleaned = 0.000130387 Jy
! Component: 850  -  total flux cleaned = 0.000141541 Jy
! Component: 900  -  total flux cleaned = 0.000119671 Jy
! Component: 950  -  total flux cleaned = 0.000119652 Jy
! Component: 1000  -  total flux cleaned = 7.70787e-05 Jy
! Component: 1050  -  total flux cleaned = 0.000108556 Jy
! Component: 1100  -  total flux cleaned = 9.8057e-05 Jy
! Component: 1150  -  total flux cleaned = 8.80262e-05 Jy
! Component: 1200  -  total flux cleaned = 0.000108285 Jy
! Component: 1250  -  total flux cleaned = 0.000118099 Jy
! Component: 1300  -  total flux cleaned = 8.85285e-05 Jy
! Component: 1350  -  total flux cleaned = 7.8816e-05 Jy
! Component: 1400  -  total flux cleaned = 8.84103e-05 Jy
! Component: 1450  -  total flux cleaned = 6.94012e-05 Jy
! Component: 1500  -  total flux cleaned = 1.28797e-05 Jy
! Component: 1550  -  total flux cleaned = 5.02611e-05 Jy
! Component: 1600  -  total flux cleaned = 1.3083e-05 Jy
! Component: 1650  -  total flux cleaned = 1.31381e-05 Jy
! Component: 1700  -  total flux cleaned = 4.04352e-05 Jy
! Component: 1750  -  total flux cleaned = 5.83146e-05 Jy
! Component: 1800  -  total flux cleaned = 4.9448e-05 Jy
! Component: 1850  -  total flux cleaned = 5.82498e-05 Jy
! Component: 1900  -  total flux cleaned = 4.07131e-05 Jy
! Component: 1950  -  total flux cleaned = 7.5477e-05 Jy
! Component: 2000  -  total flux cleaned = 6.68577e-05 Jy
! Component: 2050  -  total flux cleaned = 4.98468e-05 Jy
! Component: 2100  -  total flux cleaned = 4.97539e-05 Jy
! Component: 2150  -  total flux cleaned = 2.45269e-05 Jy
! Component: 2200  -  total flux cleaned = 2.45231e-05 Jy
! Component: 2250  -  total flux cleaned = -8.59402e-06 Jy
! Component: 2300  -  total flux cleaned = -3.78741e-07 Jy
! Component: 2350  -  total flux cleaned = -2.48676e-05 Jy
! Component: 2400  -  total flux cleaned = -6.49226e-07 Jy
! Component: 2450  -  total flux cleaned = -8.70497e-06 Jy
! Component: 2500  -  total flux cleaned = -4.86532e-05 Jy
! Component: 2550  -  total flux cleaned = -7.24038e-05 Jy
! Component: 2600  -  total flux cleaned = -6.44842e-05 Jy
! Component: 2650  -  total flux cleaned = -7.22601e-05 Jy
! Component: 2700  -  total flux cleaned = -5.67565e-05 Jy
! Component: 2750  -  total flux cleaned = -6.45331e-05 Jy
! Component: 2800  -  total flux cleaned = -5.68836e-05 Jy
! Component: 2850  -  total flux cleaned = -4.93785e-05 Jy
! Component: 2900  -  total flux cleaned = -7.20629e-05 Jy
! Component: 2950  -  total flux cleaned = -7.96104e-05 Jy
! Component: 3000  -  total flux cleaned = -9.46088e-05 Jy
! Component: 3050  -  total flux cleaned = -7.96938e-05 Jy
! Component: 3100  -  total flux cleaned = -7.23252e-05 Jy
! Component: 3150  -  total flux cleaned = -0.000138374 Jy
! Component: 3200  -  total flux cleaned = -0.000116472 Jy
! Component: 3250  -  total flux cleaned = -0.000109192 Jy
! Component: 3300  -  total flux cleaned = -0.000138097 Jy
! Component: 3350  -  total flux cleaned = -0.00015954 Jy
! Component: 3400  -  total flux cleaned = -0.000152356 Jy
! Component: 3450  -  total flux cleaned = -0.000173636 Jy
! Component: 3500  -  total flux cleaned = -0.00015252 Jy
! Component: 3550  -  total flux cleaned = -0.000173668 Jy
! Component: 3600  -  total flux cleaned = -0.000201504 Jy
! Component: 3650  -  total flux cleaned = -0.000180712 Jy
! Component: 3700  -  total flux cleaned = -0.000194557 Jy
! Component: 3750  -  total flux cleaned = -0.000201449 Jy
! Component: 3800  -  total flux cleaned = -0.000180977 Jy
! Component: 3850  -  total flux cleaned = -0.000167369 Jy
! Component: 3900  -  total flux cleaned = -0.000180949 Jy
! Component: 3950  -  total flux cleaned = -0.000201097 Jy
! Component: 4000  -  total flux cleaned = -0.000180993 Jy
! Component: 4050  -  total flux cleaned = -0.000187627 Jy
! Total flux subtracted in 4096 components = -0.00018767 Jy
! Clean residual min=-0.000418 max=0.000415 Jy/beam
! Clean residual mean=0.000000 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.135639 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 508 components and 0.135639 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1903+0145_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8581 x 2.029 at -6.36 degrees (North through East)
! Clean map  min=-0.00064128  max=0.076101 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1903+0145_X_map.fits
wmodel /image_prod/ug002_uva//J1903+0145_X_map.mod
! Writing 508 model components to file: /image_prod/ug002_uva//J1903+0145_X_map.mod
wobs   /image_prod/ug002_uva//J1903+0145_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1903+0145_X_uvs.fits
wwins  /image_prod/ug002_uva//J1903+0145_X_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J1903+0145_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0761011 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000112799 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.444668 0.444668 0.889337 1.77867 3.55735 7.11469 14.2294 28.4588 56.9175
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.076 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  674.66 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1903+0145_X_dfm.log closed on Thu Mar  5 04:01:35 2020