! Started logfile: /image_prod/ug002_uva//J1858-2510_S_dfm.log on Thu Mar 5 04:00:18 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1858-2510_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1858-2510_S_uva.fits ! AN table 1: 50 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.802222 visibilities/baseline/integration-bin. ! Found source: J1858-2510 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5415 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1858-2510_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.017118Jy sigma=6.477522 ! Fit after self-cal, rms=0.890241Jy sigma=5.608775 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=6.304 mas, bpa=-2.416 degrees ! Estimated noise=2.51067 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0863397 Jy ! Component: 100 - total flux cleaned = 0.107763 Jy ! Total flux subtracted in 100 components = 0.107763 Jy ! Clean residual min=-0.008179 max=0.011526 Jy/beam ! Clean residual mean=0.000001 rms=0.002325 Jy/beam ! Combined flux in latest and established models = 0.107763 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.107763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089617Jy sigma=0.509498 ! Fit after self-cal, rms=0.089552Jy sigma=0.509087 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=7.829 mas, bpa=-0.3347 degrees ! Estimated noise=1.56716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153869 Jy ! Component: 100 - total flux cleaned = 0.0237454 Jy ! Component: 150 - total flux cleaned = 0.0286078 Jy ! Component: 200 - total flux cleaned = 0.0301965 Jy ! Total flux subtracted in 200 components = 0.0301965 Jy ! Clean residual min=-0.007083 max=0.008395 Jy/beam ! Clean residual mean=0.000000 rms=0.001813 Jy/beam ! Combined flux in latest and established models = 0.137959 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 44 components and 0.137959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.087302Jy sigma=0.487542 ! Fit after self-cal, rms=0.087268Jy sigma=0.486900 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.504 x 7.829 at -0.3347 degrees (North through East) ! Clean map min=-0.0067568 max=0.1109 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.88 HN 1.17 KP 0.95 ! LA 1.01 MK 1.00 NL 0.95 OV 0.84 ! PT 1.23 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.65 FD 0.89 HN 1.20 KP 0.99 ! LA 0.96 MK 1.01 NL 0.92 OV 0.84 ! PT 1.24 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.91 HN 1.21 KP 0.99 ! LA 1.01 MK 1.02 NL 0.95 OV 0.86 ! PT 1.22 SC 0.94 ! ! ! Fit before self-cal, rms=0.087268Jy sigma=0.486900 ! Fit after self-cal, rms=0.093653Jy sigma=0.466618 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=7.866 mas, bpa=0.6172 degrees ! Estimated noise=1.55856 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000705534 Jy ! Component: 100 - total flux cleaned = 0.000811314 Jy ! Component: 150 - total flux cleaned = 0.000462687 Jy ! Component: 200 - total flux cleaned = 0.000414003 Jy ! Total flux subtracted in 200 components = 0.000414003 Jy ! Clean residual min=-0.003261 max=0.003615 Jy/beam ! Clean residual mean=0.000006 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.138373 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 65 components and 0.138373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093492Jy sigma=0.465681 ! Fit after self-cal, rms=0.093828Jy sigma=0.465112 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.093828Jy sigma=0.465112 ! Fit after self-cal, rms=0.100815Jy sigma=0.462050 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.506 mas, bmaj=7.871 mas, bpa=0.478 degrees ! Estimated noise=1.55451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000615731 Jy ! Component: 100 - total flux cleaned = 0.000616068 Jy ! Component: 150 - total flux cleaned = 0.00066624 Jy ! Component: 200 - total flux cleaned = 0.00071213 Jy ! Total flux subtracted in 200 components = 0.00071213 Jy ! Clean residual min=-0.002749 max=0.002743 Jy/beam ! Clean residual mean=0.000006 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.139085 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.139085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100756Jy sigma=0.461651 ! Fit after self-cal, rms=0.100875Jy sigma=0.461575 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190484 Jy ! Component: 100 - total flux cleaned = 0.000231997 Jy ! Component: 150 - total flux cleaned = 0.00023037 Jy ! Component: 200 - total flux cleaned = 0.00019523 Jy ! Total flux subtracted in 200 components = 0.00019523 Jy ! Clean residual min=-0.002707 max=0.002711 Jy/beam ! Clean residual mean=0.000006 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.13928 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 82 components and 0.13928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100843Jy sigma=0.461362 ! Fit after self-cal, rms=0.100842Jy sigma=0.461345 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100842Jy sigma=0.461345 ! Fit after self-cal, rms=0.102737Jy sigma=0.461258 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=7.858 mas, bpa=0.443 degrees ! Estimated noise=1.54866 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.66177e-07 Jy ! Component: 100 - total flux cleaned = 3.92925e-05 Jy ! Component: 150 - total flux cleaned = 3.93718e-05 Jy ! Component: 200 - total flux cleaned = 3.91805e-05 Jy ! Total flux subtracted in 200 components = 3.91805e-05 Jy ! Clean residual min=-0.002612 max=0.002580 Jy/beam ! Clean residual mean=0.000005 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.13932 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 84 components and 0.13932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102712Jy sigma=0.461081 ! Fit after self-cal, rms=0.102725Jy sigma=0.461067 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.44573e-05 Jy ! Component: 100 - total flux cleaned = 4.26342e-05 Jy ! Component: 150 - total flux cleaned = 1.55956e-05 Jy ! Component: 200 - total flux cleaned = -3.16539e-05 Jy ! Total flux subtracted in 200 components = -3.16539e-05 Jy ! Clean residual min=-0.002622 max=0.002567 Jy/beam ! Clean residual mean=0.000005 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.139288 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 0.139288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102709Jy sigma=0.460967 ! Fit after self-cal, rms=0.102706Jy sigma=0.460958 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102706Jy sigma=0.460958 ! Fit after self-cal, rms=0.103325Jy sigma=0.460940 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.836 mas, bmaj=18.32 mas, bpa=2.938 degrees ! Estimated noise=1.81253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203407 Jy ! Component: 100 - total flux cleaned = 0.000176137 Jy ! Component: 150 - total flux cleaned = 0.00021727 Jy ! Component: 200 - total flux cleaned = 0.000235995 Jy ! Total flux subtracted in 200 components = 0.000235995 Jy ! Clean residual min=-0.002477 max=0.002750 Jy/beam ! Clean residual mean=0.000010 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.139524 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 95 components and 0.139524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103316Jy sigma=0.460928 ! Fit after self-cal, rms=0.103312Jy sigma=0.460922 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.87073e-05 Jy ! Component: 100 - total flux cleaned = 8.34819e-05 Jy ! Component: 150 - total flux cleaned = 9.99966e-05 Jy ! Component: 200 - total flux cleaned = 0.000129363 Jy ! Total flux subtracted in 200 components = 0.000129363 Jy ! Clean residual min=-0.002437 max=0.002736 Jy/beam ! Clean residual mean=0.000009 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.139653 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 98 components and 0.139653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103308Jy sigma=0.460926 ! Fit after self-cal, rms=0.103303Jy sigma=0.460923 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=7.85 mas, bpa=0.4062 degrees ! Estimated noise=1.54562 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.49 x 7.85 at 0.4062 degrees (North through East) ! Clean map min=-0.0024983 max=0.11048 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.759 mas, bmaj=6.278 mas, bpa=-1.437 degrees ! Estimated noise=2.50231 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0854865 Jy ! Component: 100 - total flux cleaned = 0.108699 Jy ! Component: 150 - total flux cleaned = 0.120218 Jy ! Component: 200 - total flux cleaned = 0.127036 Jy ! Total flux subtracted in 200 components = 0.127036 Jy ! Clean residual min=-0.005603 max=0.004949 Jy/beam ! Clean residual mean=0.000002 rms=0.001356 Jy/beam ! Combined flux in latest and established models = 0.127036 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.127036 Jy ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=7.85 mas, bpa=0.4062 degrees ! Estimated noise=1.54562 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00502639 Jy ! Component: 100 - total flux cleaned = 0.00799799 Jy ! Component: 150 - total flux cleaned = 0.00983337 Jy ! Component: 200 - total flux cleaned = 0.010438 Jy ! Total flux subtracted in 200 components = 0.010438 Jy ! Clean residual min=-0.002846 max=0.002716 Jy/beam ! Clean residual mean=0.000006 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.137474 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 41 components and 0.137474 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.836 mas, bmaj=18.32 mas, bpa=2.938 degrees ! Estimated noise=1.81253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162331 Jy ! Component: 100 - total flux cleaned = 0.00188995 Jy ! Component: 150 - total flux cleaned = 0.00200629 Jy ! Component: 200 - total flux cleaned = 0.00205118 Jy ! Total flux subtracted in 200 components = 0.00205118 Jy ! Clean residual min=-0.002466 max=0.002765 Jy/beam ! Clean residual mean=0.000010 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.139525 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.99745e-05 Jy ! Component: 100 - total flux cleaned = 1.96881e-05 Jy ! Component: 150 - total flux cleaned = 3.71839e-05 Jy ! Component: 200 - total flux cleaned = 5.33643e-05 Jy ! Total flux subtracted in 200 components = 5.33643e-05 Jy ! Clean residual min=-0.002389 max=0.002731 Jy/beam ! Clean residual mean=0.000010 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.139578 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 58 components and 0.139578 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.49 mas, bmaj=7.85 mas, bpa=0.4062 degrees ! Estimated noise=1.54562 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000187542 Jy ! Component: 100 - total flux cleaned = -0.000268771 Jy ! Component: 150 - total flux cleaned = -0.000268276 Jy ! Component: 200 - total flux cleaned = -0.000299815 Jy ! Total flux subtracted in 200 components = -0.000299815 Jy ! Clean residual min=-0.002576 max=0.002598 Jy/beam ! Clean residual mean=0.000005 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.139278 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 68 components and 0.139278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103329Jy sigma=0.461025 ! Fit after self-cal, rms=0.103326Jy sigma=0.460974 wmodel J1858-2510_S_map.mod ! Writing 68 model components to file: J1858-2510_S_map.mod wobs J1858-2510_S_uvs.fits ! Writing UV FITS file: J1858-2510_S_uvs.fits wwins J1858-2510_S_map.win ! wwins: Wrote 2 windows to J1858-2510_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.30985e-05 Jy ! Component: 100 - total flux cleaned = -8.06389e-05 Jy ! Component: 150 - total flux cleaned = 4.32559e-05 Jy ! Component: 200 - total flux cleaned = 0.000201672 Jy ! Component: 250 - total flux cleaned = 0.000427238 Jy ! Component: 300 - total flux cleaned = 0.000571563 Jy ! Component: 350 - total flux cleaned = 0.000676522 Jy ! Component: 400 - total flux cleaned = 0.000709264 Jy ! Component: 450 - total flux cleaned = 0.0006425 Jy ! Component: 500 - total flux cleaned = 0.000675008 Jy ! Component: 550 - total flux cleaned = 0.000705971 Jy ! Component: 600 - total flux cleaned = 0.000583795 Jy ! Component: 650 - total flux cleaned = 0.000553984 Jy ! Component: 700 - total flux cleaned = 0.000524549 Jy ! Component: 750 - total flux cleaned = 0.00043897 Jy ! Component: 800 - total flux cleaned = 0.000438855 Jy ! Component: 850 - total flux cleaned = 0.000439184 Jy ! Component: 900 - total flux cleaned = 0.000466396 Jy ! Component: 950 - total flux cleaned = 0.000466638 Jy ! Component: 1000 - total flux cleaned = 0.000493227 Jy ! Component: 1050 - total flux cleaned = 0.000622944 Jy ! Component: 1100 - total flux cleaned = 0.000724882 Jy ! Component: 1150 - total flux cleaned = 0.000800922 Jy ! Component: 1200 - total flux cleaned = 0.000949957 Jy ! Component: 1250 - total flux cleaned = 0.00107217 Jy ! Component: 1300 - total flux cleaned = 0.00121756 Jy ! Component: 1350 - total flux cleaned = 0.00131283 Jy ! Component: 1400 - total flux cleaned = 0.00143079 Jy ! Component: 1450 - total flux cleaned = 0.00154719 Jy ! Component: 1500 - total flux cleaned = 0.00170799 Jy ! Component: 1550 - total flux cleaned = 0.00179891 Jy ! Component: 1600 - total flux cleaned = 0.00188855 Jy ! Component: 1650 - total flux cleaned = 0.00193302 Jy ! Component: 1700 - total flux cleaned = 0.00208651 Jy ! Component: 1750 - total flux cleaned = 0.00223784 Jy ! Component: 1800 - total flux cleaned = 0.00232342 Jy ! Component: 1850 - total flux cleaned = 0.00236608 Jy ! Component: 1900 - total flux cleaned = 0.00257546 Jy ! Component: 1950 - total flux cleaned = 0.00267891 Jy ! Component: 2000 - total flux cleaned = 0.00282213 Jy ! Component: 2050 - total flux cleaned = 0.00296369 Jy ! Component: 2100 - total flux cleaned = 0.00312368 Jy ! Component: 2150 - total flux cleaned = 0.00324215 Jy ! Component: 2200 - total flux cleaned = 0.00337953 Jy ! Component: 2250 - total flux cleaned = 0.00341848 Jy ! Component: 2300 - total flux cleaned = 0.0035723 Jy ! Component: 2350 - total flux cleaned = 0.00366747 Jy ! Component: 2400 - total flux cleaned = 0.00376147 Jy ! Component: 2450 - total flux cleaned = 0.00385464 Jy ! Component: 2500 - total flux cleaned = 0.00394685 Jy ! Component: 2550 - total flux cleaned = 0.00405624 Jy ! Component: 2600 - total flux cleaned = 0.00412876 Jy ! Component: 2650 - total flux cleaned = 0.00420018 Jy ! Component: 2700 - total flux cleaned = 0.00425322 Jy ! Component: 2750 - total flux cleaned = 0.00427093 Jy ! Component: 2800 - total flux cleaned = 0.00430572 Jy ! Component: 2850 - total flux cleaned = 0.00440933 Jy ! Component: 2900 - total flux cleaned = 0.00446029 Jy ! Component: 2950 - total flux cleaned = 0.00452812 Jy ! Component: 3000 - total flux cleaned = 0.00454496 Jy ! Component: 3050 - total flux cleaned = 0.00459492 Jy ! Component: 3100 - total flux cleaned = 0.00459488 Jy ! Component: 3150 - total flux cleaned = 0.00464392 Jy ! Component: 3200 - total flux cleaned = 0.00467648 Jy ! Component: 3250 - total flux cleaned = 0.00470869 Jy ! Component: 3300 - total flux cleaned = 0.00470865 Jy ! Component: 3350 - total flux cleaned = 0.00470873 Jy ! Component: 3400 - total flux cleaned = 0.00469307 Jy ! Component: 3450 - total flux cleaned = 0.00472442 Jy ! Component: 3500 - total flux cleaned = 0.00475532 Jy ! Component: 3550 - total flux cleaned = 0.0047093 Jy ! Component: 3600 - total flux cleaned = 0.00477036 Jy ! Component: 3650 - total flux cleaned = 0.00478572 Jy ! Component: 3700 - total flux cleaned = 0.00483094 Jy ! Component: 3750 - total flux cleaned = 0.00486083 Jy ! Component: 3800 - total flux cleaned = 0.00487576 Jy ! Component: 3850 - total flux cleaned = 0.00489047 Jy ! Component: 3900 - total flux cleaned = 0.00491978 Jy ! Component: 3950 - total flux cleaned = 0.00493429 Jy ! Component: 4000 - total flux cleaned = 0.00499213 Jy ! Component: 4050 - total flux cleaned = 0.00503505 Jy ! Total flux subtracted in 4096 components = 0.00503515 Jy ! Clean residual min=-0.000848 max=0.000814 Jy/beam ! Clean residual mean=0.000004 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.144314 Jy keep ! Adding 233 model components to the UV plane model. ! The established model now contains 301 components and 0.144314 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1858-2510_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.49 x 7.85 at 0.4062 degrees (North through East) ! Clean map min=-0.0021271 max=0.11083 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1858-2510_S_map.fits wmodel /image_prod/ug002_uva//J1858-2510_S_map.mod ! Writing 301 model components to file: /image_prod/ug002_uva//J1858-2510_S_map.mod wobs /image_prod/ug002_uva//J1858-2510_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1858-2510_S_uvs.fits wwins /image_prod/ug002_uva//J1858-2510_S_map.win ! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1858-2510_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.110827 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000252816 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.684353 0.684353 1.36871 2.73741 5.47482 10.9496 21.8993 43.7986 87.5971 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.11 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 438.37 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1858-2510_S_dfm.log closed on Thu Mar 5 04:00:22 2020