! Started logfile: /image_prod/ug002_uva//J1856+0610_S_dfm.log on Thu Mar  5 03:59:26 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1856+0610_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1856+0610_S_uva.fits
! AN table 1: 113 integrations on 15 of 15 possible baselines.
! AN table 2: 35 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.679769 visibilities/baseline/integration-bin.
! Found source: J1856+0610
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3528 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1856+0610_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 122 telescope corrections were flagged in sub-array 1.
!  A total of 70 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 122 telescope corrections were flagged in sub-array 1.
!  A total of 70 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 122 telescope corrections were flagged in sub-array 1.
!  A total of 70 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.006801Jy  sigma=9.066425
! Fit after  self-cal, rms=0.932136Jy  sigma=8.370624
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.647 mas, bmaj=16.96 mas, bpa=36.95 degrees
! Estimated noise=2.6938 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0536229 Jy
! Component: 100  -  total flux cleaned = 0.0767722 Jy
! Total flux subtracted in 100 components = 0.0767722 Jy
! Clean residual min=-0.014216 max=0.015153 Jy/beam
! Clean residual mean=-0.000031 rms=0.004476 Jy/beam
! Combined flux in latest and established models = 0.0767722 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 47 components and 0.0767722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063833Jy  sigma=0.562213
! Fit after  self-cal, rms=0.062538Jy  sigma=0.553199
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.441 mas, bmaj=18.43 mas, bpa=36.62 degrees
! Estimated noise=1.36976 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209823 Jy
! Component: 100  -  total flux cleaned = 0.034895 Jy
! Component: 150  -  total flux cleaned = 0.0453921 Jy
! Component: 200  -  total flux cleaned = 0.0536879 Jy
! Total flux subtracted in 200 components = 0.0536879 Jy
! Clean residual min=-0.007001 max=0.007803 Jy/beam
! Clean residual mean=-0.000019 rms=0.002335 Jy/beam
! Combined flux in latest and established models = 0.13046 Jy
! Performing phase self-cal
! Adding 126 model components to the UV plane model.
! The established model now contains 166 components and 0.13046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054506Jy  sigma=0.454566
! Fit after  self-cal, rms=0.054136Jy  sigma=0.451361
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.441 x 18.43 at 36.62 degrees (North through East)
! Clean map  min=-0.0071515  max=0.075621 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.91     KP        0.90     LA        0.98     
!   NL        1.62     OV        1.17     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.22     FD        0.92     KP        0.91     LA        0.92     
!   NL        1.37     OV        1.11     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.93     KP        0.89     LA        0.94     
!   NL        1.30     OV        1.14     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
! 
! Fit before self-cal, rms=0.054136Jy  sigma=0.451361
! Fit after  self-cal, rms=0.059646Jy  sigma=0.433639
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.646 mas, bmaj=19.73 mas, bpa=37.23 degrees
! Estimated noise=1.37505 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00435526 Jy
! Component: 100  -  total flux cleaned = 0.00694753 Jy
! Component: 150  -  total flux cleaned = 0.00787583 Jy
! Component: 200  -  total flux cleaned = 0.0086405 Jy
! Total flux subtracted in 200 components = 0.0086405 Jy
! Clean residual min=-0.004310 max=0.004125 Jy/beam
! Clean residual mean=-0.000014 rms=0.001262 Jy/beam
! Combined flux in latest and established models = 0.139101 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 189 components and 0.139101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059332Jy  sigma=0.428836
! Fit after  self-cal, rms=0.059457Jy  sigma=0.428218
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059457Jy  sigma=0.428218
! Fit after  self-cal, rms=0.056565Jy  sigma=0.425229
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.465 mas, bmaj=19.86 mas, bpa=36.76 degrees
! Estimated noise=1.36175 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00222527 Jy
! Component: 100  -  total flux cleaned = 0.00290162 Jy
! Component: 150  -  total flux cleaned = 0.00323678 Jy
! Component: 200  -  total flux cleaned = 0.00366348 Jy
! Total flux subtracted in 200 components = 0.00366348 Jy
! Clean residual min=-0.003317 max=0.003407 Jy/beam
! Clean residual mean=-0.000006 rms=0.000953 Jy/beam
! Combined flux in latest and established models = 0.142764 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 202 components and 0.142764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056467Jy  sigma=0.423863
! Fit after  self-cal, rms=0.056419Jy  sigma=0.423656
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000732908 Jy
! Component: 100  -  total flux cleaned = 0.000730425 Jy
! Component: 150  -  total flux cleaned = 0.000912565 Jy
! Component: 200  -  total flux cleaned = 0.00111295 Jy
! Total flux subtracted in 200 components = 0.00111295 Jy
! Clean residual min=-0.003209 max=0.003092 Jy/beam
! Clean residual mean=-0.000006 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.143877 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 212 components and 0.143877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056378Jy  sigma=0.422965
! Fit after  self-cal, rms=0.056343Jy  sigma=0.422886
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056343Jy  sigma=0.422886
! Fit after  self-cal, rms=0.054545Jy  sigma=0.422559
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.391 mas, bmaj=19.76 mas, bpa=36.66 degrees
! Estimated noise=1.34445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139944 Jy
! Component: 100  -  total flux cleaned = 0.00198729 Jy
! Component: 150  -  total flux cleaned = 0.0024465 Jy
! Component: 200  -  total flux cleaned = 0.00282588 Jy
! Total flux subtracted in 200 components = 0.00282588 Jy
! Clean residual min=-0.002934 max=0.002806 Jy/beam
! Clean residual mean=-0.000006 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.146703 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 227 components and 0.146703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054482Jy  sigma=0.421905
! Fit after  self-cal, rms=0.054435Jy  sigma=0.421825
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000660814 Jy
! Component: 100  -  total flux cleaned = 0.00100134 Jy
! Component: 150  -  total flux cleaned = 0.00127635 Jy
! Component: 200  -  total flux cleaned = 0.00150078 Jy
! Total flux subtracted in 200 components = 0.00150078 Jy
! Clean residual min=-0.002878 max=0.002715 Jy/beam
! Clean residual mean=-0.000006 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.148204 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 235 components and 0.148204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054399Jy  sigma=0.421526
! Fit after  self-cal, rms=0.054376Jy  sigma=0.421490
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054376Jy  sigma=0.421490
! Fit after  self-cal, rms=0.052889Jy  sigma=0.421278
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.52 mas, bmaj=19.95 mas, bpa=35.03 degrees
! Estimated noise=1.31427 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102782 Jy
! Component: 100  -  total flux cleaned = 0.00150513 Jy
! Component: 150  -  total flux cleaned = 0.00189657 Jy
! Component: 200  -  total flux cleaned = 0.00224575 Jy
! Total flux subtracted in 200 components = 0.00224575 Jy
! Clean residual min=-0.002494 max=0.002413 Jy/beam
! Clean residual mean=-0.000006 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.150449 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 255 components and 0.150449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052849Jy  sigma=0.420913
! Fit after  self-cal, rms=0.052820Jy  sigma=0.420874
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000426643 Jy
! Component: 100  -  total flux cleaned = 0.000682159 Jy
! Component: 150  -  total flux cleaned = 0.000931655 Jy
! Component: 200  -  total flux cleaned = 0.0011598 Jy
! Total flux subtracted in 200 components = 0.0011598 Jy
! Clean residual min=-0.002441 max=0.002368 Jy/beam
! Clean residual mean=-0.000006 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.151609 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 261 components and 0.151609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052796Jy  sigma=0.420701
! Fit after  self-cal, rms=0.052778Jy  sigma=0.420679
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.35 mas, bmaj=19.63 mas, bpa=36.61 degrees
! Estimated noise=1.33031 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.35 x 19.63 at 36.61 degrees (North through East)
! Clean map  min=-0.0026968  max=0.073285 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.503 mas, bmaj=18.32 mas, bpa=37.02 degrees
! Estimated noise=2.97329 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0523447 Jy
! Component: 100  -  total flux cleaned = 0.0765578 Jy
! Component: 150  -  total flux cleaned = 0.0922249 Jy
! Component: 200  -  total flux cleaned = 0.103455 Jy
! Total flux subtracted in 200 components = 0.103455 Jy
! Clean residual min=-0.009593 max=0.008264 Jy/beam
! Clean residual mean=-0.000016 rms=0.002622 Jy/beam
! Combined flux in latest and established models = 0.103455 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 92 model components to the UV plane model.
! The established model now contains 92 components and 0.103455 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.35 mas, bmaj=19.63 mas, bpa=36.61 degrees
! Estimated noise=1.33031 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109391 Jy
! Component: 100  -  total flux cleaned = 0.0185541 Jy
! Component: 150  -  total flux cleaned = 0.0244174 Jy
! Component: 200  -  total flux cleaned = 0.0290586 Jy
! Total flux subtracted in 200 components = 0.0290586 Jy
! Clean residual min=-0.005122 max=0.004118 Jy/beam
! Clean residual mean=-0.000007 rms=0.001320 Jy/beam
! Combined flux in latest and established models = 0.132513 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 163 components and 0.132513 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.52 mas, bmaj=19.95 mas, bpa=35.03 degrees
! Estimated noise=1.31427 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00390837 Jy
! Component: 100  -  total flux cleaned = 0.00691818 Jy
! Component: 150  -  total flux cleaned = 0.00934275 Jy
! Component: 200  -  total flux cleaned = 0.0113354 Jy
! Total flux subtracted in 200 components = 0.0113354 Jy
! Clean residual min=-0.003295 max=0.003078 Jy/beam
! Clean residual mean=-0.000006 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.143849 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00165818 Jy
! Component: 100  -  total flux cleaned = 0.00304885 Jy
! Component: 150  -  total flux cleaned = 0.00404274 Jy
! Component: 200  -  total flux cleaned = 0.00477649 Jy
! Total flux subtracted in 200 components = 0.00477649 Jy
! Clean residual min=-0.002784 max=0.002721 Jy/beam
! Clean residual mean=-0.000006 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.148625 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 239 components and 0.148625 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.35 mas, bmaj=19.63 mas, bpa=36.61 degrees
! Estimated noise=1.33031 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000498389 Jy
! Component: 100  -  total flux cleaned = 0.000850166 Jy
! Component: 150  -  total flux cleaned = 0.00109332 Jy
! Component: 200  -  total flux cleaned = 0.00131784 Jy
! Total flux subtracted in 200 components = 0.00131784 Jy
! Clean residual min=-0.002841 max=0.002670 Jy/beam
! Clean residual mean=-0.000005 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.149943 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 251 components and 0.149943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052880Jy  sigma=0.421528
! Fit after  self-cal, rms=0.052833Jy  sigma=0.421336
wmodel J1856+0610_S_map.mod
! Writing 251 model components to file: J1856+0610_S_map.mod
wobs   J1856+0610_S_uvs.fits
! Writing UV FITS file: J1856+0610_S_uvs.fits
wwins  J1856+0610_S_map.win
! wwins: Wrote 1 windows to J1856+0610_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00072605 Jy
! Component: 100  -  total flux cleaned = -0.000481743 Jy
! Component: 150  -  total flux cleaned = -0.000296234 Jy
! Component: 200  -  total flux cleaned = -0.000262276 Jy
! Component: 250  -  total flux cleaned = -0.000167397 Jy
! Component: 300  -  total flux cleaned = -0.000109137 Jy
! Component: 350  -  total flux cleaned = -0.000164212 Jy
! Component: 400  -  total flux cleaned = -0.000241319 Jy
! Component: 450  -  total flux cleaned = -0.000240399 Jy
! Component: 500  -  total flux cleaned = -0.000194273 Jy
! Component: 550  -  total flux cleaned = -0.000194171 Jy
! Component: 600  -  total flux cleaned = -0.000152029 Jy
! Component: 650  -  total flux cleaned = -0.000233176 Jy
! Component: 700  -  total flux cleaned = -0.000252985 Jy
! Component: 750  -  total flux cleaned = -0.00029071 Jy
! Component: 800  -  total flux cleaned = -0.000362459 Jy
! Component: 850  -  total flux cleaned = -0.000431798 Jy
! Component: 900  -  total flux cleaned = -0.000498127 Jy
! Component: 950  -  total flux cleaned = -0.000546182 Jy
! Component: 1000  -  total flux cleaned = -0.000592447 Jy
! Component: 1050  -  total flux cleaned = -0.000637226 Jy
! Component: 1100  -  total flux cleaned = -0.000665603 Jy
! Component: 1150  -  total flux cleaned = -0.000707476 Jy
! Component: 1200  -  total flux cleaned = -0.000748187 Jy
! Component: 1250  -  total flux cleaned = -0.000748169 Jy
! Component: 1300  -  total flux cleaned = -0.000799629 Jy
! Component: 1350  -  total flux cleaned = -0.00081188 Jy
! Component: 1400  -  total flux cleaned = -0.000848652 Jy
! Component: 1450  -  total flux cleaned = -0.000872361 Jy
! Component: 1500  -  total flux cleaned = -0.000918851 Jy
! Component: 1550  -  total flux cleaned = -0.000918888 Jy
! Component: 1600  -  total flux cleaned = -0.000907831 Jy
! Component: 1650  -  total flux cleaned = -0.000941221 Jy
! Component: 1700  -  total flux cleaned = -0.000941165 Jy
! Component: 1750  -  total flux cleaned = -0.00094125 Jy
! Component: 1800  -  total flux cleaned = -0.00093068 Jy
! Component: 1850  -  total flux cleaned = -0.00090993 Jy
! Component: 1900  -  total flux cleaned = -0.000858931 Jy
! Component: 1950  -  total flux cleaned = -0.000818819 Jy
! Component: 2000  -  total flux cleaned = -0.000799163 Jy
! Component: 2050  -  total flux cleaned = -0.000789454 Jy
! Component: 2100  -  total flux cleaned = -0.000779873 Jy
! Component: 2150  -  total flux cleaned = -0.000741766 Jy
! Component: 2200  -  total flux cleaned = -0.000751056 Jy
! Component: 2250  -  total flux cleaned = -0.000723247 Jy
! Component: 2300  -  total flux cleaned = -0.000741571 Jy
! Component: 2350  -  total flux cleaned = -0.000723387 Jy
! Component: 2400  -  total flux cleaned = -0.000678487 Jy
! Component: 2450  -  total flux cleaned = -0.000669544 Jy
! Component: 2500  -  total flux cleaned = -0.000651886 Jy
! Component: 2550  -  total flux cleaned = -0.000642994 Jy
! Component: 2600  -  total flux cleaned = -0.00061682 Jy
! Component: 2650  -  total flux cleaned = -0.000565134 Jy
! Component: 2700  -  total flux cleaned = -0.000548067 Jy
! Component: 2750  -  total flux cleaned = -0.000514135 Jy
! Component: 2800  -  total flux cleaned = -0.000463512 Jy
! Component: 2850  -  total flux cleaned = -0.000413153 Jy
! Component: 2900  -  total flux cleaned = -0.000363067 Jy
! Component: 2950  -  total flux cleaned = -0.000321506 Jy
! Component: 3000  -  total flux cleaned = -0.000255441 Jy
! Component: 3050  -  total flux cleaned = -0.000189717 Jy
! Component: 3100  -  total flux cleaned = -0.00014058 Jy
! Component: 3150  -  total flux cleaned = -9.16603e-05 Jy
! Component: 3200  -  total flux cleaned = -1.85312e-05 Jy
! Component: 3250  -  total flux cleaned = 5.42684e-05 Jy
! Component: 3300  -  total flux cleaned = 0.00010259 Jy
! Component: 3350  -  total flux cleaned = 0.000166874 Jy
! Component: 3400  -  total flux cleaned = 0.000182914 Jy
! Component: 3450  -  total flux cleaned = 0.000238927 Jy
! Component: 3500  -  total flux cleaned = 0.00026288 Jy
! Component: 3550  -  total flux cleaned = 0.000318596 Jy
! Component: 3600  -  total flux cleaned = 0.000350341 Jy
! Component: 3650  -  total flux cleaned = 0.000405761 Jy
! Component: 3700  -  total flux cleaned = 0.000429465 Jy
! Component: 3750  -  total flux cleaned = 0.000468952 Jy
! Component: 3800  -  total flux cleaned = 0.000524274 Jy
! Component: 3850  -  total flux cleaned = 0.000579543 Jy
! Component: 3900  -  total flux cleaned = 0.000619011 Jy
! Component: 3950  -  total flux cleaned = 0.000666423 Jy
! Component: 4000  -  total flux cleaned = 0.000729619 Jy
! Component: 4050  -  total flux cleaned = 0.000777068 Jy
! Total flux subtracted in 4096 components = 0.000840386 Jy
! Clean residual min=-0.000407 max=0.000481 Jy/beam
! Clean residual mean=0.000001 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.150783 Jy
keep
! Adding 293 model components to the UV plane model.
! The established model now contains 544 components and 0.150783 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1856+0610_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.35 x 19.63 at 36.61 degrees (North through East)
! Clean map  min=-0.0013362  max=0.072657 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1856+0610_S_map.fits
wmodel /image_prod/ug002_uva//J1856+0610_S_map.mod
! Writing 544 model components to file: /image_prod/ug002_uva//J1856+0610_S_map.mod
wobs   /image_prod/ug002_uva//J1856+0610_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1856+0610_S_uvs.fits
wwins  /image_prod/ug002_uva//J1856+0610_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1856+0610_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0726569 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000151062 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.623736 0.623736 1.24747 2.49494 4.98989 9.97977 19.9595 39.9191 79.8382
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.072 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  480.972 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1856+0610_S_dfm.log closed on Thu Mar  5 03:59:30 2020