! Started logfile: /image_prod/ug002_uva//J1847-1623_S_dfm.log on Thu Mar  5 03:55:42 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1847-1623_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1847-1623_S_uva.fits
! AN table 1: 100 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.989 visibilities/baseline/integration-bin.
! Found source: J1847-1623
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 2967 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1847-1623_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001080Jy  sigma=8.966261
! Fit after  self-cal, rms=0.965629Jy  sigma=8.650251
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.71 mas, bmaj=45.05 mas, bpa=13.8 degrees
! Estimated noise=1.78417 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0287435 Jy
! Component: 100  -  total flux cleaned = 0.0350854 Jy
! Total flux subtracted in 100 components = 0.0350854 Jy
! Clean residual min=-0.002392 max=0.002456 Jy/beam
! Clean residual mean=0.000007 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.0350854 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0350854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.045828Jy  sigma=0.400017
! Fit after  self-cal, rms=0.044416Jy  sigma=0.387295
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=13.47 mas, bmaj=44.69 mas, bpa=14.49 degrees
! Estimated noise=1.462 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182123 Jy
! Component: 100  -  total flux cleaned = 0.00258864 Jy
! Component: 150  -  total flux cleaned = 0.0034514 Jy
! Component: 200  -  total flux cleaned = 0.00417746 Jy
! Total flux subtracted in 200 components = 0.00417746 Jy
! Clean residual min=-0.000752 max=0.000751 Jy/beam
! Clean residual mean=0.000002 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.0392628 Jy
! Performing phase self-cal
! Adding 91 model components to the UV plane model.
! The established model now contains 96 components and 0.0392628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.044198Jy  sigma=0.385140
! Fit after  self-cal, rms=0.044152Jy  sigma=0.384817
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 13.47 x 44.69 at 14.49 degrees (North through East)
! Clean map  min=-0.0016652  max=0.036998 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     KP        1.01     LA        0.97     OV        1.02     
!   PT        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     KP        0.95     LA        0.99     OV        0.94     
!   PT        1.06     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     KP        1.04     LA        0.99     OV        0.93     
!   PT        1.03     
! 
! 
! Fit before self-cal, rms=0.044152Jy  sigma=0.384817
! Fit after  self-cal, rms=0.043064Jy  sigma=0.384601
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=13.29 mas, bmaj=44.74 mas, bpa=14.69 degrees
! Estimated noise=1.42895 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000641808 Jy
! Component: 100  -  total flux cleaned = 0.00101795 Jy
! Component: 150  -  total flux cleaned = 0.00111612 Jy
! Component: 200  -  total flux cleaned = 0.00101031 Jy
! Total flux subtracted in 200 components = 0.00101031 Jy
! Clean residual min=-0.000429 max=0.000426 Jy/beam
! Clean residual mean=0.000001 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.0402731 Jy
! Performing phase self-cal
! Adding 98 model components to the UV plane model.
! The established model now contains 194 components and 0.0402731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.042998Jy  sigma=0.383963
! Fit after  self-cal, rms=0.042987Jy  sigma=0.383652
! Inverting map 
! Added new window around map position (94.5, -97).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000846386 Jy
! Component: 100  -  total flux cleaned = 0.00109133 Jy
! Component: 150  -  total flux cleaned = 0.00117945 Jy
! Component: 200  -  total flux cleaned = 0.00123791 Jy
! Total flux subtracted in 200 components = 0.00123791 Jy
! Clean residual min=-0.000653 max=0.000808 Jy/beam
! Clean residual mean=0.000002 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.041511 Jy
! Performing phase self-cal
! Adding 87 model components to the UV plane model.
! The established model now contains 274 components and 0.041511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.042963Jy  sigma=0.383391
! Fit after  self-cal, rms=0.042951Jy  sigma=0.383307
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.042951Jy  sigma=0.383307
! Fit after  self-cal, rms=0.042438Jy  sigma=0.382771
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.23 mas, bmaj=44.82 mas, bpa=14.74 degrees
! Estimated noise=1.41742 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000641411 Jy
! Component: 100  -  total flux cleaned = 0.000894314 Jy
! Component: 150  -  total flux cleaned = 0.00107438 Jy
! Component: 200  -  total flux cleaned = 0.00113275 Jy
! Total flux subtracted in 200 components = 0.00113275 Jy
! Clean residual min=-0.000650 max=0.000742 Jy/beam
! Clean residual mean=-0.000000 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.0426438 Jy
selfcal
! Performing phase self-cal
! Adding 93 model components to the UV plane model.
! The established model now contains 359 components and 0.0426438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.042425Jy  sigma=0.382648
! Fit after  self-cal, rms=0.042424Jy  sigma=0.382493
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000399818 Jy
! Component: 100  -  total flux cleaned = 0.000545838 Jy
! Component: 150  -  total flux cleaned = 0.000595831 Jy
! Component: 200  -  total flux cleaned = 0.000628515 Jy
! Total flux subtracted in 200 components = 0.000628515 Jy
! Clean residual min=-0.000654 max=0.000688 Jy/beam
! Clean residual mean=-0.000001 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.0432723 Jy
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 418 components and 0.0432723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.042417Jy  sigma=0.382427
! Fit after  self-cal, rms=0.042415Jy  sigma=0.382406
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.042415Jy  sigma=0.382406
! Fit after  self-cal, rms=0.042144Jy  sigma=0.382304
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.2 mas, bmaj=44.9 mas, bpa=14.74 degrees
! Estimated noise=1.40748 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000313607 Jy
! Component: 100  -  total flux cleaned = 0.00047505 Jy
! Component: 150  -  total flux cleaned = 0.000457909 Jy
! Component: 200  -  total flux cleaned = 0.000441734 Jy
! Total flux subtracted in 200 components = 0.000441734 Jy
! Clean residual min=-0.000629 max=0.000659 Jy/beam
! Clean residual mean=-0.000000 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.043714 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 456 components and 0.043714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.042137Jy  sigma=0.382258
! Fit after  self-cal, rms=0.042145Jy  sigma=0.382234
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000129637 Jy
! Component: 100  -  total flux cleaned = 0.000197842 Jy
! Component: 150  -  total flux cleaned = 0.000178125 Jy
! Component: 200  -  total flux cleaned = 0.000136147 Jy
! Total flux subtracted in 200 components = 0.000136147 Jy
! Clean residual min=-0.000673 max=0.000689 Jy/beam
! Clean residual mean=-0.000000 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.0438502 Jy
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 504 components and 0.0438502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.042142Jy  sigma=0.382213
! Fit after  self-cal, rms=0.042140Jy  sigma=0.382200
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.042140Jy  sigma=0.382200
! Fit after  self-cal, rms=0.042106Jy  sigma=0.382177
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.84 mas, bmaj=44.37 mas, bpa=14.4 degrees
! Estimated noise=1.41206 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000138927 Jy
! Component: 100  -  total flux cleaned = 0.000139093 Jy
! Component: 150  -  total flux cleaned = 0.000131375 Jy
! Component: 200  -  total flux cleaned = 0.000124359 Jy
! Total flux subtracted in 200 components = 0.000124359 Jy
! Clean residual min=-0.000694 max=0.000718 Jy/beam
! Clean residual mean=0.000000 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.0439745 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 539 components and 0.0439745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.042101Jy  sigma=0.382149
! Fit after  self-cal, rms=0.042102Jy  sigma=0.382047
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.58215e-05 Jy
! Component: 100  -  total flux cleaned = -4.1268e-05 Jy
! Component: 150  -  total flux cleaned = -4.07786e-05 Jy
! Component: 200  -  total flux cleaned = -6.24856e-05 Jy
! Total flux subtracted in 200 components = -6.24856e-05 Jy
! Clean residual min=-0.000751 max=0.000687 Jy/beam
! Clean residual mean=-0.000001 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.043912 Jy
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 593 components and 0.043912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.042100Jy  sigma=0.382030
! Fit after  self-cal, rms=0.042100Jy  sigma=0.382023
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=13.17 mas, bmaj=44.97 mas, bpa=14.73 degrees
! Estimated noise=1.40434 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 13.17 x 44.97 at 14.73 degrees (North through East)
! Clean map  min=-0.0012762  max=0.036074 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.43 mas, bmaj=45.46 mas, bpa=13.93 degrees
! Estimated noise=1.68469 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00616494 Jy
! Component: 100  -  total flux cleaned = 0.00942195 Jy
! Component: 150  -  total flux cleaned = 0.0109865 Jy
! Component: 200  -  total flux cleaned = 0.0124912 Jy
! Total flux subtracted in 200 components = 0.0124912 Jy
! Clean residual min=-0.009983 max=0.025503 Jy/beam
! Clean residual mean=-0.000012 rms=0.004436 Jy/beam
! Combined flux in latest and established models = 0.0124912 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 51 model components to the UV plane model.
! The established model now contains 51 components and 0.0124912 Jy
! Inverting map and beam 
! Estimated beam: bmin=13.17 mas, bmaj=44.97 mas, bpa=14.73 degrees
! Estimated noise=1.40434 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.5, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0203809 Jy
! Component: 100  -  total flux cleaned = 0.0200534 Jy
! Component: 150  -  total flux cleaned = 0.0190788 Jy
! Component: 200  -  total flux cleaned = 0.0202652 Jy
! Total flux subtracted in 200 components = 0.0202652 Jy
! Clean residual min=-0.003836 max=0.002971 Jy/beam
! Clean residual mean=0.000023 rms=0.001041 Jy/beam
! Combined flux in latest and established models = 0.0327564 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 101 components and 0.0327564 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.84 mas, bmaj=44.37 mas, bpa=14.4 degrees
! Estimated noise=1.41206 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000851711 Jy
! Component: 100  -  total flux cleaned = 0.00158737 Jy
! Component: 150  -  total flux cleaned = 0.00190082 Jy
! Component: 200  -  total flux cleaned = 0.00224435 Jy
! Total flux subtracted in 200 components = 0.00224435 Jy
! Clean residual min=-0.002573 max=0.001824 Jy/beam
! Clean residual mean=0.000014 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.0350007 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181569 Jy
! Component: 100  -  total flux cleaned = 0.000350151 Jy
! Component: 150  -  total flux cleaned = 0.000293014 Jy
! Component: 200  -  total flux cleaned = 0.000244381 Jy
! Total flux subtracted in 200 components = 0.000244381 Jy
! Clean residual min=-0.001862 max=0.001437 Jy/beam
! Clean residual mean=0.000009 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.0352451 Jy
! Adding 86 model components to the UV plane model.
! The established model now contains 179 components and 0.0352451 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=13.17 mas, bmaj=44.97 mas, bpa=14.73 degrees
! Estimated noise=1.40434 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000341372 Jy
! Component: 100  -  total flux cleaned = -0.000500666 Jy
! Component: 150  -  total flux cleaned = -0.000571183 Jy
! Component: 200  -  total flux cleaned = -0.000574283 Jy
! Total flux subtracted in 200 components = -0.000574283 Jy
! Clean residual min=-0.001363 max=0.001369 Jy/beam
! Clean residual mean=0.000008 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.0346708 Jy
selfcal
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 225 components and 0.0346708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.042274Jy  sigma=0.383779
! Fit after  self-cal, rms=0.042170Jy  sigma=0.382710
wmodel J1847-1623_S_map.mod
! Writing 225 model components to file: J1847-1623_S_map.mod
wobs   J1847-1623_S_uvs.fits
! Writing UV FITS file: J1847-1623_S_uvs.fits
wwins  J1847-1623_S_map.win
! wwins: Wrote 2 windows to J1847-1623_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -8.42549e-05 Jy
! Component: 100  -  total flux cleaned = -0.000188802 Jy
! Component: 150  -  total flux cleaned = -0.000241637 Jy
! Component: 200  -  total flux cleaned = -0.000231902 Jy
! Component: 250  -  total flux cleaned = -0.000248514 Jy
! Component: 300  -  total flux cleaned = -0.000279889 Jy
! Component: 350  -  total flux cleaned = -0.000294372 Jy
! Component: 400  -  total flux cleaned = -0.000287403 Jy
! Component: 450  -  total flux cleaned = -0.000299974 Jy
! Component: 500  -  total flux cleaned = -0.000324047 Jy
! Component: 550  -  total flux cleaned = -0.000358802 Jy
! Component: 600  -  total flux cleaned = -0.000408884 Jy
! Component: 650  -  total flux cleaned = -0.000462826 Jy
! Component: 700  -  total flux cleaned = -0.000509926 Jy
! Component: 750  -  total flux cleaned = -0.000555817 Jy
! Component: 800  -  total flux cleaned = -0.00059552 Jy
! Component: 850  -  total flux cleaned = -0.000600458 Jy
! Component: 900  -  total flux cleaned = -0.000610001 Jy
! Component: 950  -  total flux cleaned = -0.000600702 Jy
! Component: 1000  -  total flux cleaned = -0.000582398 Jy
! Component: 1050  -  total flux cleaned = -0.000564385 Jy
! Component: 1100  -  total flux cleaned = -0.000546647 Jy
! Component: 1150  -  total flux cleaned = -0.000529191 Jy
! Component: 1200  -  total flux cleaned = -0.000529243 Jy
! Component: 1250  -  total flux cleaned = -0.000524964 Jy
! Component: 1300  -  total flux cleaned = -0.000529114 Jy
! Component: 1350  -  total flux cleaned = -0.000508279 Jy
! Component: 1400  -  total flux cleaned = -0.000504148 Jy
! Component: 1450  -  total flux cleaned = -0.000483778 Jy
! Component: 1500  -  total flux cleaned = -0.000479779 Jy
! Component: 1550  -  total flux cleaned = -0.000463822 Jy
! Component: 1600  -  total flux cleaned = -0.000455919 Jy
! Component: 1650  -  total flux cleaned = -0.000432314 Jy
! Component: 1700  -  total flux cleaned = -0.000412723 Jy
! Component: 1750  -  total flux cleaned = -0.000385418 Jy
! Component: 1800  -  total flux cleaned = -0.000365993 Jy
! Component: 1850  -  total flux cleaned = -0.00034663 Jy
! Component: 1900  -  total flux cleaned = -0.000323479 Jy
! Component: 1950  -  total flux cleaned = -0.000292716 Jy
! Component: 2000  -  total flux cleaned = -0.000281184 Jy
! Component: 2050  -  total flux cleaned = -0.000262011 Jy
! Component: 2100  -  total flux cleaned = -0.000242863 Jy
! Component: 2150  -  total flux cleaned = -0.00022754 Jy
! Component: 2200  -  total flux cleaned = -0.000208414 Jy
! Component: 2250  -  total flux cleaned = -0.00020461 Jy
! Component: 2300  -  total flux cleaned = -0.000219996 Jy
! Component: 2350  -  total flux cleaned = -0.000220023 Jy
! Component: 2400  -  total flux cleaned = -0.000231678 Jy
! Component: 2450  -  total flux cleaned = -0.000239528 Jy
! Component: 2500  -  total flux cleaned = -0.00025529 Jy
! Component: 2550  -  total flux cleaned = -0.000275205 Jy
! Component: 2600  -  total flux cleaned = -0.000291288 Jy
! Component: 2650  -  total flux cleaned = -0.000311584 Jy
! Component: 2700  -  total flux cleaned = -0.000327976 Jy
! Component: 2750  -  total flux cleaned = -0.00034873 Jy
! Component: 2800  -  total flux cleaned = -0.000365517 Jy
! Component: 2850  -  total flux cleaned = -0.000382475 Jy
! Component: 2900  -  total flux cleaned = -0.000403895 Jy
! Component: 2950  -  total flux cleaned = -0.000421264 Jy
! Component: 3000  -  total flux cleaned = -0.000438875 Jy
! Component: 3050  -  total flux cleaned = -0.000461179 Jy
! Component: 3100  -  total flux cleaned = -0.000474779 Jy
! Component: 3150  -  total flux cleaned = -0.000488477 Jy
! Component: 3200  -  total flux cleaned = -0.000502284 Jy
! Component: 3250  -  total flux cleaned = -0.000520977 Jy
! Component: 3300  -  total flux cleaned = -0.000544739 Jy
! Component: 3350  -  total flux cleaned = -0.000559207 Jy
! Component: 3400  -  total flux cleaned = -0.000578696 Jy
! Component: 3450  -  total flux cleaned = -0.00059349 Jy
! Component: 3500  -  total flux cleaned = -0.000613562 Jy
! Component: 3550  -  total flux cleaned = -0.000633951 Jy
! Component: 3600  -  total flux cleaned = -0.000644174 Jy
! Component: 3650  -  total flux cleaned = -0.000659894 Jy
! Component: 3700  -  total flux cleaned = -0.000659862 Jy
! Component: 3750  -  total flux cleaned = -0.000665299 Jy
! Component: 3800  -  total flux cleaned = -0.000670877 Jy
! Component: 3850  -  total flux cleaned = -0.000670902 Jy
! Component: 3900  -  total flux cleaned = -0.000665079 Jy
! Component: 3950  -  total flux cleaned = -0.000676639 Jy
! Component: 4000  -  total flux cleaned = -0.000682579 Jy
! Component: 4050  -  total flux cleaned = -0.000682512 Jy
! Total flux subtracted in 4096 components = -0.000694807 Jy
! Clean residual min=-0.000328 max=0.000326 Jy/beam
! Clean residual mean=-0.000001 rms=0.000126 Jy/beam
! Combined flux in latest and established models = 0.033976 Jy
keep
! Adding 419 model components to the UV plane model.
! The established model now contains 644 components and 0.033976 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1847-1623_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 13.17 x 44.97 at 14.73 degrees (North through East)
! Clean map  min=-0.007742  max=0.025354 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1847-1623_S_map.fits
wmodel /image_prod/ug002_uva//J1847-1623_S_map.mod
! Writing 644 model components to file: /image_prod/ug002_uva//J1847-1623_S_map.mod
wobs   /image_prod/ug002_uva//J1847-1623_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1847-1623_S_uvs.fits
wwins  /image_prod/ug002_uva//J1847-1623_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1847-1623_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0253536 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000132144 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.56361 1.56361 3.12722 6.25445 12.5089 25.0178 50.0356
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.025 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  191.863 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1847-1623_S_dfm.log closed on Thu Mar  5 03:55:47 2020