! Started logfile: /image_prod/ug002_uva//J1846-0651_S_dfm.log on Thu Mar  5 03:55:21 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1846-0651_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1846-0651_S_uva.fits
! AN table 1: 90 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.729101 visibilities/baseline/integration-bin.
! Found source: J1846-0651
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4134 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1846-0651_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003512Jy  sigma=8.433546
! Fit after  self-cal, rms=0.950771Jy  sigma=7.965609
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.458 mas, bmaj=24.01 mas, bpa=-6.303 degrees
! Estimated noise=2.82517 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, -0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0371357 Jy
! Component: 100  -  total flux cleaned = 0.0504725 Jy
! Total flux subtracted in 100 components = 0.0504725 Jy
! Clean residual min=-0.004020 max=0.006822 Jy/beam
! Clean residual mean=0.000004 rms=0.001545 Jy/beam
! Combined flux in latest and established models = 0.0504725 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.0504725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060219Jy  sigma=0.468806
! Fit after  self-cal, rms=0.058833Jy  sigma=0.457084
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.07 mas, bmaj=24.25 mas, bpa=-5.564 degrees
! Estimated noise=1.33287 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108848 Jy
! Component: 100  -  total flux cleaned = 0.0163431 Jy
! Component: 150  -  total flux cleaned = 0.0195091 Jy
! Component: 200  -  total flux cleaned = 0.0215063 Jy
! Total flux subtracted in 200 components = 0.0215063 Jy
! Clean residual min=-0.002121 max=0.002106 Jy/beam
! Clean residual mean=-0.000001 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.0719788 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 83 components and 0.0719787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057030Jy  sigma=0.438417
! Fit after  self-cal, rms=0.056986Jy  sigma=0.437660
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.07 x 24.25 at -5.564 degrees (North through East)
! Clean map  min=-0.0023771  max=0.052805 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        0.83     KP        1.00     LA        0.97     
!   NL        1.07     OV        1.14     PT        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.95     HN        0.86     KP        0.97     LA        0.98     
!   NL        1.06     OV        1.03     PT        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     HN        1.03     KP        0.99     LA        0.95     
!   NL        0.97     OV        1.00     PT        0.97     
! 
! 
! Fit before self-cal, rms=0.056986Jy  sigma=0.437660
! Fit after  self-cal, rms=0.055730Jy  sigma=0.436782
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.14 mas, bmaj=24.45 mas, bpa=-6.078 degrees
! Estimated noise=1.31528 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173877 Jy
! Component: 100  -  total flux cleaned = 0.000217469 Jy
! Component: 150  -  total flux cleaned = 0.000315066 Jy
! Component: 200  -  total flux cleaned = 0.000369873 Jy
! Total flux subtracted in 200 components = 0.000369873 Jy
! Clean residual min=-0.001736 max=0.001983 Jy/beam
! Clean residual mean=-0.000005 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.0723486 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 102 components and 0.0723486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055670Jy  sigma=0.436358
! Fit after  self-cal, rms=0.055696Jy  sigma=0.436207
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055696Jy  sigma=0.436207
! Fit after  self-cal, rms=0.055086Jy  sigma=0.434889
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.02 mas, bmaj=24.52 mas, bpa=-6.422 degrees
! Estimated noise=1.31006 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000211535 Jy
! Component: 100  -  total flux cleaned = 0.000277241 Jy
! Component: 150  -  total flux cleaned = 0.000360034 Jy
! Component: 200  -  total flux cleaned = 0.000472993 Jy
! Total flux subtracted in 200 components = 0.000472993 Jy
! Clean residual min=-0.001489 max=0.001704 Jy/beam
! Clean residual mean=-0.000003 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.0728216 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 111 components and 0.0728216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055048Jy  sigma=0.434605
! Fit after  self-cal, rms=0.055054Jy  sigma=0.434437
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141299 Jy
! Component: 100  -  total flux cleaned = -0.000118478 Jy
! Component: 150  -  total flux cleaned = -4.29067e-05 Jy
! Component: 200  -  total flux cleaned = 3.84223e-05 Jy
! Total flux subtracted in 200 components = 3.84223e-05 Jy
! Clean residual min=-0.001499 max=0.001738 Jy/beam
! Clean residual mean=-0.000003 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.07286 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 133 components and 0.07286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055036Jy  sigma=0.434317
! Fit after  self-cal, rms=0.055040Jy  sigma=0.434290
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055040Jy  sigma=0.434290
! Fit after  self-cal, rms=0.053995Jy  sigma=0.434135
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.85 mas, bmaj=24.52 mas, bpa=-7.031 degrees
! Estimated noise=1.29429 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000231477 Jy
! Component: 100  -  total flux cleaned = 0.000330873 Jy
! Component: 150  -  total flux cleaned = 0.000413141 Jy
! Component: 200  -  total flux cleaned = 0.00048218 Jy
! Total flux subtracted in 200 components = 0.00048218 Jy
! Clean residual min=-0.001390 max=0.001649 Jy/beam
! Clean residual mean=-0.000004 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.0733422 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 144 components and 0.0733422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053973Jy  sigma=0.433974
! Fit after  self-cal, rms=0.053969Jy  sigma=0.433939
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.94398e-05 Jy
! Component: 100  -  total flux cleaned = -6.26154e-05 Jy
! Component: 150  -  total flux cleaned = -3.05442e-05 Jy
! Component: 200  -  total flux cleaned = -1.75984e-05 Jy
! Total flux subtracted in 200 components = -1.75984e-05 Jy
! Clean residual min=-0.001434 max=0.001642 Jy/beam
! Clean residual mean=-0.000004 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.0733246 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 157 components and 0.0733246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053957Jy  sigma=0.433864
! Fit after  self-cal, rms=0.053950Jy  sigma=0.433848
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053950Jy  sigma=0.433848
! Fit after  self-cal, rms=0.053123Jy  sigma=0.433767
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.96 mas, bmaj=24.98 mas, bpa=-6.813 degrees
! Estimated noise=1.28618 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000360852 Jy
! Component: 100  -  total flux cleaned = 0.000415576 Jy
! Component: 150  -  total flux cleaned = 0.000416723 Jy
! Component: 200  -  total flux cleaned = 0.000416845 Jy
! Total flux subtracted in 200 components = 0.000416845 Jy
! Clean residual min=-0.001327 max=0.001596 Jy/beam
! Clean residual mean=-0.000004 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.0737415 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 171 components and 0.0737415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053107Jy  sigma=0.433667
! Fit after  self-cal, rms=0.053098Jy  sigma=0.433650
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.67825e-07 Jy
! Component: 100  -  total flux cleaned = 1.41102e-05 Jy
! Component: 150  -  total flux cleaned = 3.66941e-05 Jy
! Component: 200  -  total flux cleaned = 5.70703e-05 Jy
! Total flux subtracted in 200 components = 5.70703e-05 Jy
! Clean residual min=-0.001373 max=0.001593 Jy/beam
! Clean residual mean=-0.000005 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.0737985 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 187 components and 0.0737985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053091Jy  sigma=0.433601
! Fit after  self-cal, rms=0.053082Jy  sigma=0.433558
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=10.71 mas, bmaj=24.51 mas, bpa=-7.57 degrees
! Estimated noise=1.28052 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.71 x 24.51 at -7.57 degrees (North through East)
! Clean map  min=-0.0023043  max=0.049913 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.174 mas, bmaj=24.37 mas, bpa=-7.921 degrees
! Estimated noise=2.68742 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0367992 Jy
! Component: 100  -  total flux cleaned = 0.0522071 Jy
! Component: 150  -  total flux cleaned = 0.0604589 Jy
! Component: 200  -  total flux cleaned = 0.0642947 Jy
! Total flux subtracted in 200 components = 0.0642947 Jy
! Clean residual min=-0.003420 max=0.003823 Jy/beam
! Clean residual mean=-0.000002 rms=0.000967 Jy/beam
! Combined flux in latest and established models = 0.0642947 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 43 model components to the UV plane model.
! The established model now contains 43 components and 0.0642947 Jy
! Inverting map and beam 
! Estimated beam: bmin=10.71 mas, bmaj=24.51 mas, bpa=-7.57 degrees
! Estimated noise=1.28052 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00462002 Jy
! Component: 100  -  total flux cleaned = 0.0059619 Jy
! Component: 150  -  total flux cleaned = 0.00699449 Jy
! Component: 200  -  total flux cleaned = 0.0077093 Jy
! Total flux subtracted in 200 components = 0.0077093 Jy
! Clean residual min=-0.001819 max=0.001689 Jy/beam
! Clean residual mean=-0.000003 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.072004 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 107 components and 0.0720039 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.96 mas, bmaj=24.98 mas, bpa=-6.813 degrees
! Estimated noise=1.28618 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103378 Jy
! Component: 100  -  total flux cleaned = 0.00117983 Jy
! Component: 150  -  total flux cleaned = 0.00133794 Jy
! Component: 200  -  total flux cleaned = 0.00144787 Jy
! Total flux subtracted in 200 components = 0.00144787 Jy
! Clean residual min=-0.001396 max=0.001687 Jy/beam
! Clean residual mean=-0.000004 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.0734518 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.75359e-05 Jy
! Component: 100  -  total flux cleaned = 0.000184031 Jy
! Component: 150  -  total flux cleaned = 0.000242643 Jy
! Component: 200  -  total flux cleaned = 0.000313953 Jy
! Total flux subtracted in 200 components = 0.000313953 Jy
! Clean residual min=-0.001364 max=0.001656 Jy/beam
! Clean residual mean=-0.000004 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.0737658 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 170 components and 0.0737658 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=10.71 mas, bmaj=24.51 mas, bpa=-7.57 degrees
! Estimated noise=1.28052 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.60996e-05 Jy
! Component: 100  -  total flux cleaned = -3.31841e-05 Jy
! Component: 150  -  total flux cleaned = -1.72564e-05 Jy
! Component: 200  -  total flux cleaned = 1.40211e-05 Jy
! Total flux subtracted in 200 components = 1.40211e-05 Jy
! Clean residual min=-0.001466 max=0.001671 Jy/beam
! Clean residual mean=-0.000003 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.0737798 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 183 components and 0.0737798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053075Jy  sigma=0.433599
! Fit after  self-cal, rms=0.053051Jy  sigma=0.433432
wmodel J1846-0651_S_map.mod
! Writing 183 model components to file: J1846-0651_S_map.mod
wobs   J1846-0651_S_uvs.fits
! Writing UV FITS file: J1846-0651_S_uvs.fits
wwins  J1846-0651_S_map.win
! wwins: Wrote 1 windows to J1846-0651_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 1.72287e-05 Jy
! Component: 100  -  total flux cleaned = -3.52793e-05 Jy
! Component: 150  -  total flux cleaned = -3.55412e-05 Jy
! Component: 200  -  total flux cleaned = 2.76181e-05 Jy
! Component: 250  -  total flux cleaned = 0.000107762 Jy
! Component: 300  -  total flux cleaned = 0.000203312 Jy
! Component: 350  -  total flux cleaned = 0.000148324 Jy
! Component: 400  -  total flux cleaned = 9.5105e-05 Jy
! Component: 450  -  total flux cleaned = 1.01276e-05 Jy
! Component: 500  -  total flux cleaned = 1.02636e-05 Jy
! Component: 550  -  total flux cleaned = -2.15122e-05 Jy
! Component: 600  -  total flux cleaned = -6.76396e-05 Jy
! Component: 650  -  total flux cleaned = -0.000127629 Jy
! Component: 700  -  total flux cleaned = -0.000200589 Jy
! Component: 750  -  total flux cleaned = -0.000186276 Jy
! Component: 800  -  total flux cleaned = -0.000200245 Jy
! Component: 850  -  total flux cleaned = -0.000227223 Jy
! Component: 900  -  total flux cleaned = -0.000266608 Jy
! Component: 950  -  total flux cleaned = -0.000292405 Jy
! Component: 1000  -  total flux cleaned = -0.000305397 Jy
! Component: 1050  -  total flux cleaned = -0.000392589 Jy
! Component: 1100  -  total flux cleaned = -0.000453436 Jy
! Component: 1150  -  total flux cleaned = -0.000477312 Jy
! Component: 1200  -  total flux cleaned = -0.00050057 Jy
! Component: 1250  -  total flux cleaned = -0.000523457 Jy
! Component: 1300  -  total flux cleaned = -0.000545852 Jy
! Component: 1350  -  total flux cleaned = -0.000556931 Jy
! Component: 1400  -  total flux cleaned = -0.000556947 Jy
! Component: 1450  -  total flux cleaned = -0.000578829 Jy
! Component: 1500  -  total flux cleaned = -0.000600352 Jy
! Component: 1550  -  total flux cleaned = -0.000558014 Jy
! Component: 1600  -  total flux cleaned = -0.0005163 Jy
! Component: 1650  -  total flux cleaned = -0.000475264 Jy
! Component: 1700  -  total flux cleaned = -0.00045505 Jy
! Component: 1750  -  total flux cleaned = -0.000414927 Jy
! Component: 1800  -  total flux cleaned = -0.000355277 Jy
! Component: 1850  -  total flux cleaned = -0.000325846 Jy
! Component: 1900  -  total flux cleaned = -0.00026732 Jy
! Component: 1950  -  total flux cleaned = -0.000219045 Jy
! Component: 2000  -  total flux cleaned = -0.000161664 Jy
! Component: 2050  -  total flux cleaned = -0.000104765 Jy
! Component: 2100  -  total flux cleaned = -5.78559e-05 Jy
! Component: 2150  -  total flux cleaned = 7.28242e-06 Jy
! Component: 2200  -  total flux cleaned = 4.41396e-05 Jy
! Component: 2250  -  total flux cleaned = 9.0048e-05 Jy
! Component: 2300  -  total flux cleaned = 0.000135685 Jy
! Component: 2350  -  total flux cleaned = 0.000190162 Jy
! Component: 2400  -  total flux cleaned = 0.000271377 Jy
! Component: 2450  -  total flux cleaned = 0.000316263 Jy
! Component: 2500  -  total flux cleaned = 0.000378666 Jy
! Component: 2550  -  total flux cleaned = 0.000432028 Jy
! Component: 2600  -  total flux cleaned = 0.000520497 Jy
! Component: 2650  -  total flux cleaned = 0.000564513 Jy
! Component: 2700  -  total flux cleaned = 0.000582096 Jy
! Component: 2750  -  total flux cleaned = 0.000634669 Jy
! Component: 2800  -  total flux cleaned = 0.000660874 Jy
! Component: 2850  -  total flux cleaned = 0.000687021 Jy
! Component: 2900  -  total flux cleaned = 0.000756646 Jy
! Component: 2950  -  total flux cleaned = 0.00076527 Jy
! Component: 3000  -  total flux cleaned = 0.000808631 Jy
! Component: 3050  -  total flux cleaned = 0.000860501 Jy
! Component: 3100  -  total flux cleaned = 0.00089507 Jy
! Component: 3150  -  total flux cleaned = 0.000929554 Jy
! Component: 3200  -  total flux cleaned = 0.000989804 Jy
! Component: 3250  -  total flux cleaned = 0.00104135 Jy
! Component: 3300  -  total flux cleaned = 0.00111001 Jy
! Component: 3350  -  total flux cleaned = 0.00114435 Jy
! Component: 3400  -  total flux cleaned = 0.0012129 Jy
! Component: 3450  -  total flux cleaned = 0.0012557 Jy
! Component: 3500  -  total flux cleaned = 0.0013242 Jy
! Component: 3550  -  total flux cleaned = 0.00137546 Jy
! Component: 3600  -  total flux cleaned = 0.00144385 Jy
! Component: 3650  -  total flux cleaned = 0.00147798 Jy
! Component: 3700  -  total flux cleaned = 0.0015463 Jy
! Component: 3750  -  total flux cleaned = 0.00158047 Jy
! Component: 3800  -  total flux cleaned = 0.00164018 Jy
! Component: 3850  -  total flux cleaned = 0.00169133 Jy
! Component: 3900  -  total flux cleaned = 0.00175101 Jy
! Component: 3950  -  total flux cleaned = 0.0017936 Jy
! Component: 4000  -  total flux cleaned = 0.00181917 Jy
! Component: 4050  -  total flux cleaned = 0.00187033 Jy
! Total flux subtracted in 4096 components = 0.00192147 Jy
! Clean residual min=-0.000516 max=0.000515 Jy/beam
! Clean residual mean=0.000000 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.0757013 Jy
keep
! Adding 451 model components to the UV plane model.
! The established model now contains 634 components and 0.0757013 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1846-0651_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.71 x 24.51 at -7.57 degrees (North through East)
! Clean map  min=-0.0017443  max=0.049495 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1846-0651_S_map.fits
wmodel /image_prod/ug002_uva//J1846-0651_S_map.mod
! Writing 634 model components to file: /image_prod/ug002_uva//J1846-0651_S_map.mod
wobs   /image_prod/ug002_uva//J1846-0651_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1846-0651_S_uvs.fits
wwins  /image_prod/ug002_uva//J1846-0651_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1846-0651_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0494947 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000182724 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.10754 1.10754 2.21507 4.43015 8.8603 17.7206 35.4412 70.8824
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.049 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  270.871 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1846-0651_S_dfm.log closed on Thu Mar  5 03:55:25 2020