! Started logfile: /image_prod/ug002_uva//J1845-2200_S_dfm.log on Thu Mar 5 03:54:52 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1845-2200_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1845-2200_S_uva.fits ! AN table 1: 50 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.998571 visibilities/baseline/integration-bin. ! Found source: J1845-2200 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 4194 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1845-2200_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.004910Jy sigma=6.699913 ! Fit after self-cal, rms=0.937630Jy sigma=6.238828 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=6.449 mas, bpa=-6.388 degrees ! Estimated noise=2.34431 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0514251 Jy ! Component: 100 - total flux cleaned = 0.0645672 Jy ! Total flux subtracted in 100 components = 0.0645672 Jy ! Clean residual min=-0.005769 max=0.006629 Jy/beam ! Clean residual mean=-0.000004 rms=0.001559 Jy/beam ! Combined flux in latest and established models = 0.0645672 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0645672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.074323Jy sigma=0.458810 ! Fit after self-cal, rms=0.073961Jy sigma=0.455425 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.768 mas, bmaj=7.269 mas, bpa=-5.364 degrees ! Estimated noise=1.68933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00697984 Jy ! Component: 100 - total flux cleaned = 0.0105444 Jy ! Component: 150 - total flux cleaned = 0.0125969 Jy ! Component: 200 - total flux cleaned = 0.0138227 Jy ! Total flux subtracted in 200 components = 0.0138227 Jy ! Clean residual min=-0.004099 max=0.005370 Jy/beam ! Clean residual mean=-0.000011 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.0783899 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.0783899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073381Jy sigma=0.450541 ! Fit after self-cal, rms=0.073422Jy sigma=0.450305 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.768 x 7.269 at -5.364 degrees (North through East) ! Clean map min=-0.0040089 max=0.065501 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.92 HN 0.99 KP 0.99 ! MK 0.91 NL 0.97 OV 0.89 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.85 FD 0.90 HN 1.11 KP 0.94 ! MK 1.05 NL 1.05 OV 0.95 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.93 HN 1.00 KP 0.96 ! MK 1.14 NL 0.95 OV 0.90 SC 0.85 ! ! ! Fit before self-cal, rms=0.073422Jy sigma=0.450305 ! Fit after self-cal, rms=0.076479Jy sigma=0.441693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=7.359 mas, bpa=-4.92 degrees ! Estimated noise=1.68608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649302 Jy ! Component: 100 - total flux cleaned = 0.000688215 Jy ! Component: 150 - total flux cleaned = 0.000689285 Jy ! Component: 200 - total flux cleaned = 0.000689156 Jy ! Total flux subtracted in 200 components = 0.000689156 Jy ! Clean residual min=-0.002885 max=0.002698 Jy/beam ! Clean residual mean=-0.000008 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.0790791 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 31 components and 0.0790791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076442Jy sigma=0.441494 ! Fit after self-cal, rms=0.076793Jy sigma=0.440977 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076793Jy sigma=0.440977 ! Fit after self-cal, rms=0.077787Jy sigma=0.440929 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=7.348 mas, bpa=-4.795 degrees ! Estimated noise=1.69162 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000652078 Jy ! Component: 100 - total flux cleaned = 0.000651798 Jy ! Component: 150 - total flux cleaned = 0.000651745 Jy ! Component: 200 - total flux cleaned = 0.000630168 Jy ! Total flux subtracted in 200 components = 0.000630168 Jy ! Clean residual min=-0.002872 max=0.002663 Jy/beam ! Clean residual mean=-0.000008 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.0797092 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.0797092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077765Jy sigma=0.440830 ! Fit after self-cal, rms=0.077790Jy sigma=0.440819 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.83196e-05 Jy ! Component: 100 - total flux cleaned = 1.86689e-05 Jy ! Component: 150 - total flux cleaned = 1.0921e-06 Jy ! Component: 200 - total flux cleaned = -2.99309e-05 Jy ! Total flux subtracted in 200 components = -2.99309e-05 Jy ! Clean residual min=-0.002898 max=0.002677 Jy/beam ! Clean residual mean=-0.000008 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.0796793 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.0796793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077782Jy sigma=0.440768 ! Fit after self-cal, rms=0.077779Jy sigma=0.440765 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077779Jy sigma=0.440765 ! Fit after self-cal, rms=0.078032Jy sigma=0.439828 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.762 mas, bmaj=7.312 mas, bpa=-4.758 degrees ! Estimated noise=1.68767 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146482 Jy ! Component: 100 - total flux cleaned = 0.000232282 Jy ! Component: 150 - total flux cleaned = 0.000243963 Jy ! Component: 200 - total flux cleaned = 0.000222831 Jy ! Total flux subtracted in 200 components = 0.000222831 Jy ! Clean residual min=-0.002534 max=0.002507 Jy/beam ! Clean residual mean=0.000001 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.0799021 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.0799021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078027Jy sigma=0.439808 ! Fit after self-cal, rms=0.078041Jy sigma=0.439765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.9167e-06 Jy ! Component: 100 - total flux cleaned = -1.30275e-05 Jy ! Component: 150 - total flux cleaned = -3.18136e-05 Jy ! Component: 200 - total flux cleaned = -4.86735e-05 Jy ! Total flux subtracted in 200 components = -4.86735e-05 Jy ! Clean residual min=-0.002539 max=0.002524 Jy/beam ! Clean residual mean=0.000000 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.0798535 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.0798535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078039Jy sigma=0.439747 ! Fit after self-cal, rms=0.078040Jy sigma=0.439746 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078040Jy sigma=0.439746 ! Fit after self-cal, rms=0.077824Jy sigma=0.439735 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.416 mas, bmaj=13.66 mas, bpa=-0.7058 degrees ! Estimated noise=2.25031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.29319e-05 Jy ! Component: 100 - total flux cleaned = -0.000172635 Jy ! Component: 150 - total flux cleaned = -0.000243243 Jy ! Component: 200 - total flux cleaned = -0.000298923 Jy ! Total flux subtracted in 200 components = -0.000298923 Jy ! Clean residual min=-0.002472 max=0.002790 Jy/beam ! Clean residual mean=0.000005 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.0795545 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 49 components and 0.0795545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077831Jy sigma=0.439772 ! Fit after self-cal, rms=0.077827Jy sigma=0.439754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.30532e-05 Jy ! Component: 100 - total flux cleaned = 2.72666e-05 Jy ! Component: 150 - total flux cleaned = -2.63083e-05 Jy ! Component: 200 - total flux cleaned = -5.90115e-05 Jy ! Total flux subtracted in 200 components = -5.90115e-05 Jy ! Clean residual min=-0.002460 max=0.002780 Jy/beam ! Clean residual mean=0.000005 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.0794955 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.0794955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077835Jy sigma=0.439817 ! Fit after self-cal, rms=0.077834Jy sigma=0.439807 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=7.293 mas, bpa=-4.7 degrees ! Estimated noise=1.68196 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.754 x 7.293 at -4.7 degrees (North through East) ! Clean map min=-0.0024817 max=0.065212 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.402 mas, bmaj=6.512 mas, bpa=-5.31 degrees ! Estimated noise=2.30365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0502831 Jy ! Component: 100 - total flux cleaned = 0.0648103 Jy ! Component: 150 - total flux cleaned = 0.071718 Jy ! Component: 200 - total flux cleaned = 0.0754571 Jy ! Total flux subtracted in 200 components = 0.0754571 Jy ! Clean residual min=-0.003416 max=0.003492 Jy/beam ! Clean residual mean=0.000000 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.075457 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.075457 Jy ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=7.293 mas, bpa=-4.7 degrees ! Estimated noise=1.68196 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231495 Jy ! Component: 100 - total flux cleaned = 0.00350409 Jy ! Component: 150 - total flux cleaned = 0.00415163 Jy ! Component: 200 - total flux cleaned = 0.0043208 Jy ! Total flux subtracted in 200 components = 0.0043208 Jy ! Clean residual min=-0.002544 max=0.002476 Jy/beam ! Clean residual mean=0.000001 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.0797778 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.0797779 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.416 mas, bmaj=13.66 mas, bpa=-0.7058 degrees ! Estimated noise=2.25031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155067 Jy ! Component: 100 - total flux cleaned = -0.000249087 Jy ! Component: 150 - total flux cleaned = -0.000338874 Jy ! Component: 200 - total flux cleaned = -0.000393889 Jy ! Total flux subtracted in 200 components = -0.000393889 Jy ! Clean residual min=-0.002461 max=0.002793 Jy/beam ! Clean residual mean=0.000005 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.079384 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.28839e-05 Jy ! Component: 100 - total flux cleaned = -3.25175e-05 Jy ! Component: 150 - total flux cleaned = -3.26933e-05 Jy ! Component: 200 - total flux cleaned = -3.30356e-05 Jy ! Total flux subtracted in 200 components = -3.30356e-05 Jy ! Clean residual min=-0.002466 max=0.002777 Jy/beam ! Clean residual mean=0.000005 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.0793509 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 41 components and 0.0793509 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=7.293 mas, bpa=-4.7 degrees ! Estimated noise=1.68196 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000180387 Jy ! Component: 100 - total flux cleaned = -4.13195e-05 Jy ! Component: 150 - total flux cleaned = 1.50429e-05 Jy ! Component: 200 - total flux cleaned = 4.33322e-05 Jy ! Total flux subtracted in 200 components = 4.33322e-05 Jy ! Clean residual min=-0.002589 max=0.002473 Jy/beam ! Clean residual mean=0.000001 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.0793943 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.0793943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077825Jy sigma=0.439732 ! Fit after self-cal, rms=0.077817Jy sigma=0.439720 wmodel J1845-2200_S_map.mod ! Writing 52 model components to file: J1845-2200_S_map.mod wobs J1845-2200_S_uvs.fits ! Writing UV FITS file: J1845-2200_S_uvs.fits wwins J1845-2200_S_map.win ! wwins: Wrote 1 windows to J1845-2200_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000483801 Jy ! Component: 100 - total flux cleaned = -0.000730759 Jy ! Component: 150 - total flux cleaned = -0.000924298 Jy ! Component: 200 - total flux cleaned = -0.00110873 Jy ! Component: 250 - total flux cleaned = -0.00146086 Jy ! Component: 300 - total flux cleaned = -0.00179714 Jy ! Component: 350 - total flux cleaned = -0.00202455 Jy ! Component: 400 - total flux cleaned = -0.00215084 Jy ! Component: 450 - total flux cleaned = -0.0023953 Jy ! Component: 500 - total flux cleaned = -0.00257284 Jy ! Component: 550 - total flux cleaned = -0.00268784 Jy ! Component: 600 - total flux cleaned = -0.00285695 Jy ! Component: 650 - total flux cleaned = -0.00302154 Jy ! Component: 700 - total flux cleaned = -0.00318277 Jy ! Component: 750 - total flux cleaned = -0.00336703 Jy ! Component: 800 - total flux cleaned = -0.00349643 Jy ! Component: 850 - total flux cleaned = -0.0036488 Jy ! Component: 900 - total flux cleaned = -0.00364909 Jy ! Component: 950 - total flux cleaned = -0.0038216 Jy ! Component: 1000 - total flux cleaned = -0.00389356 Jy ! Component: 1050 - total flux cleaned = -0.00396496 Jy ! Component: 1100 - total flux cleaned = -0.0040815 Jy ! Component: 1150 - total flux cleaned = -0.00405853 Jy ! Component: 1200 - total flux cleaned = -0.00414935 Jy ! Component: 1250 - total flux cleaned = -0.00414962 Jy ! Component: 1300 - total flux cleaned = -0.00421562 Jy ! Component: 1350 - total flux cleaned = -0.00415045 Jy ! Component: 1400 - total flux cleaned = -0.0042147 Jy ! Component: 1450 - total flux cleaned = -0.00419357 Jy ! Component: 1500 - total flux cleaned = -0.00423532 Jy ! Component: 1550 - total flux cleaned = -0.0042558 Jy ! Component: 1600 - total flux cleaned = -0.00425542 Jy ! Component: 1650 - total flux cleaned = -0.00421509 Jy ! Component: 1700 - total flux cleaned = -0.00423483 Jy ! Component: 1750 - total flux cleaned = -0.00423495 Jy ! Component: 1800 - total flux cleaned = -0.0041962 Jy ! Component: 1850 - total flux cleaned = -0.00417721 Jy ! Component: 1900 - total flux cleaned = -0.00419603 Jy ! Component: 1950 - total flux cleaned = -0.00413981 Jy ! Component: 2000 - total flux cleaned = -0.00417707 Jy ! Component: 2050 - total flux cleaned = -0.00417729 Jy ! Component: 2100 - total flux cleaned = -0.00414097 Jy ! Component: 2150 - total flux cleaned = -0.004105 Jy ! Component: 2200 - total flux cleaned = -0.00405143 Jy ! Component: 2250 - total flux cleaned = -0.00403378 Jy ! Component: 2300 - total flux cleaned = -0.00401627 Jy ! Component: 2350 - total flux cleaned = -0.00399909 Jy ! Component: 2400 - total flux cleaned = -0.00394757 Jy ! Component: 2450 - total flux cleaned = -0.00396468 Jy ! Component: 2500 - total flux cleaned = -0.00393098 Jy ! Component: 2550 - total flux cleaned = -0.00391416 Jy ! Component: 2600 - total flux cleaned = -0.00394751 Jy ! Component: 2650 - total flux cleaned = -0.00391465 Jy ! Component: 2700 - total flux cleaned = -0.00389859 Jy ! Component: 2750 - total flux cleaned = -0.00389881 Jy ! Component: 2800 - total flux cleaned = -0.00389891 Jy ! Component: 2850 - total flux cleaned = -0.003899 Jy ! Component: 2900 - total flux cleaned = -0.00389886 Jy ! Component: 2950 - total flux cleaned = -0.00389894 Jy ! Component: 3000 - total flux cleaned = -0.00386744 Jy ! Component: 3050 - total flux cleaned = -0.00389882 Jy ! Component: 3100 - total flux cleaned = -0.00383629 Jy ! Component: 3150 - total flux cleaned = -0.00385186 Jy ! Component: 3200 - total flux cleaned = -0.00379002 Jy ! Component: 3250 - total flux cleaned = -0.00380541 Jy ! Component: 3300 - total flux cleaned = -0.00375955 Jy ! Component: 3350 - total flux cleaned = -0.00379005 Jy ! Component: 3400 - total flux cleaned = -0.00377491 Jy ! Component: 3450 - total flux cleaned = -0.00378989 Jy ! Component: 3500 - total flux cleaned = -0.00374477 Jy ! Component: 3550 - total flux cleaned = -0.00371496 Jy ! Component: 3600 - total flux cleaned = -0.00371503 Jy ! Component: 3650 - total flux cleaned = -0.00372995 Jy ! Component: 3700 - total flux cleaned = -0.00370029 Jy ! Component: 3750 - total flux cleaned = -0.00368545 Jy ! Component: 3800 - total flux cleaned = -0.00370011 Jy ! Component: 3850 - total flux cleaned = -0.00367079 Jy ! Component: 3900 - total flux cleaned = -0.00365622 Jy ! Component: 3950 - total flux cleaned = -0.00365626 Jy ! Component: 4000 - total flux cleaned = -0.00367087 Jy ! Component: 4050 - total flux cleaned = -0.00365652 Jy ! Total flux subtracted in 4096 components = -0.00365658 Jy ! Clean residual min=-0.000878 max=0.000917 Jy/beam ! Clean residual mean=0.000003 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.0757377 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 323 components and 0.0757377 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1845-2200_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.754 x 7.293 at -4.7 degrees (North through East) ! Clean map min=-0.0016489 max=0.065484 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1845-2200_S_map.fits wmodel /image_prod/ug002_uva//J1845-2200_S_map.mod ! Writing 323 model components to file: /image_prod/ug002_uva//J1845-2200_S_map.mod wobs /image_prod/ug002_uva//J1845-2200_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1845-2200_S_uvs.fits wwins /image_prod/ug002_uva//J1845-2200_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1845-2200_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.065484 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000227906 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0441 1.0441 2.0882 4.17639 8.35278 16.7056 33.4111 66.8223 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.065 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 287.329 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1845-2200_S_dfm.log closed on Thu Mar 5 03:54:55 2020