! Started logfile: /image_prod/ug002_uva//J1845+3541_X_dfm.log on Thu Mar 5 03:54:33 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1845+3541_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1845+3541_X_uva.fits ! AN table 1: 81 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.662551 visibilities/baseline/integration-bin. ! Found source: J1845+3541 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 23184 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1845+3541_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.018324Jy sigma=9.160790 ! Fit after self-cal, rms=0.841921Jy sigma=7.705184 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7279 mas, bmaj=1.192 mas, bpa=-7.42 degrees ! Estimated noise=1.12395 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113325 Jy ! Component: 100 - total flux cleaned = 0.153619 Jy ! Total flux subtracted in 100 components = 0.153619 Jy ! Clean residual min=-0.017880 max=0.052857 Jy/beam ! Clean residual mean=-0.000024 rms=0.005068 Jy/beam ! Combined flux in latest and established models = 0.153619 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.153619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.156667Jy sigma=1.398288 ! Fit after self-cal, rms=0.156251Jy sigma=1.393560 ! Inverting map ! Added new window around map position (-4.2, -4.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0480594 Jy ! Component: 100 - total flux cleaned = 0.0750481 Jy ! Total flux subtracted in 100 components = 0.0750481 Jy ! Clean residual min=-0.014312 max=0.039967 Jy/beam ! Clean residual mean=-0.000017 rms=0.003892 Jy/beam ! Combined flux in latest and established models = 0.228667 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 0.228667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.135303Jy sigma=1.208779 ! Fit after self-cal, rms=0.123692Jy sigma=1.098587 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0405894 Jy ! Component: 100 - total flux cleaned = 0.0639529 Jy ! Total flux subtracted in 100 components = 0.0639529 Jy ! Clean residual min=-0.012448 max=0.023711 Jy/beam ! Clean residual mean=-0.000008 rms=0.003041 Jy/beam ! Combined flux in latest and established models = 0.29262 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.29262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102780Jy sigma=0.902151 ! Fit after self-cal, rms=0.095076Jy sigma=0.830272 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266573 Jy ! Component: 100 - total flux cleaned = 0.0443992 Jy ! Total flux subtracted in 100 components = 0.0443992 Jy ! Clean residual min=-0.011221 max=0.025405 Jy/beam ! Clean residual mean=-0.000005 rms=0.002505 Jy/beam ! Combined flux in latest and established models = 0.337019 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 37 components and 0.33702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082020Jy sigma=0.706198 ! Fit after self-cal, rms=0.080851Jy sigma=0.696264 ! Inverting map ! Added new window around map position (-1.2, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238802 Jy ! Component: 100 - total flux cleaned = 0.0385607 Jy ! Total flux subtracted in 100 components = 0.0385607 Jy ! Clean residual min=-0.009178 max=0.015744 Jy/beam ! Clean residual mean=-0.000004 rms=0.001889 Jy/beam ! Combined flux in latest and established models = 0.37558 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.37558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070089Jy sigma=0.601189 ! Fit after self-cal, rms=0.069430Jy sigma=0.595348 ! Inverting map ! Added new window around map position (1, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015465 Jy ! Component: 100 - total flux cleaned = 0.0264594 Jy ! Total flux subtracted in 100 components = 0.0264594 Jy ! Clean residual min=-0.007351 max=0.013106 Jy/beam ! Clean residual mean=-0.000005 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.40204 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.40204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063844Jy sigma=0.545059 ! Fit after self-cal, rms=0.063671Jy sigma=0.543897 ! Inverting map ! Added new window around map position (-5.4, -5.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126378 Jy ! Component: 100 - total flux cleaned = 0.0215737 Jy ! Total flux subtracted in 100 components = 0.0215737 Jy ! Clean residual min=-0.006120 max=0.006945 Jy/beam ! Clean residual mean=-0.000003 rms=0.001239 Jy/beam ! Combined flux in latest and established models = 0.423613 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.423613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059769Jy sigma=0.506565 ! Fit after self-cal, rms=0.059597Jy sigma=0.505070 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9303 mas, bmaj=1.486 mas, bpa=-7.166 degrees ! Estimated noise=0.527101 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119982 Jy ! Component: 100 - total flux cleaned = 0.0203415 Jy ! Component: 150 - total flux cleaned = 0.0269457 Jy ! Component: 200 - total flux cleaned = 0.0322939 Jy ! Total flux subtracted in 200 components = 0.0322939 Jy ! Clean residual min=-0.005434 max=0.005388 Jy/beam ! Clean residual mean=-0.000009 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.455907 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 87 components and 0.455907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056240Jy sigma=0.474242 ! Fit after self-cal, rms=0.056059Jy sigma=0.472516 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9303 x 1.486 at -7.166 degrees (North through East) ! Clean map min=-0.0054316 max=0.13871 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.03 KP 1.03 ! LA 0.98 MK 1.04 OV 0.91 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.05 KP 1.02 ! LA 0.99 MK 1.04 OV 0.91 PT 0.91 ! SC 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.00 KP 1.03 ! LA 1.00 MK 1.02 OV 0.91 PT 0.92 ! SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.00 KP 1.02 ! LA 1.01 MK 1.06 OV 0.92 PT 0.91 ! SC 1.05 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.01 KP 1.03 ! LA 1.01 MK 1.05 OV 0.94 PT 0.89 ! SC 1.01 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.04 KP 1.02 ! LA 1.00 MK 1.06 OV 0.92 PT 0.90 ! SC 0.98 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 1.01 KP 1.04 ! LA 1.04 MK 1.05 OV 0.91 PT 0.90 ! SC 1.02 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.01 KP 1.04 ! LA 1.03 MK 1.05 OV 0.94 PT 0.92 ! SC 1.01 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.02 KP 1.04 ! LA 1.00 MK 1.01 OV 0.93 PT 0.93 ! SC 1.02 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.02 KP 1.04 ! LA 1.03 MK 1.06 OV 0.92 PT 0.91 ! SC 1.06 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.00 KP 1.06 ! LA 1.01 MK 1.08 OV 0.93 PT 0.94 ! SC 1.08 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 1.06 KP 1.05 ! LA 1.01 MK 1.12 OV 0.93 PT 0.90 ! SC 1.04 ! ! ! Fit before self-cal, rms=0.056059Jy sigma=0.472516 ! Fit after self-cal, rms=0.054875Jy sigma=0.453263 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.943 mas, bmaj=1.505 mas, bpa=-6.706 degrees ! Estimated noise=0.531723 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.6, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000798944 Jy ! Component: 100 - total flux cleaned = 0.00222606 Jy ! Component: 150 - total flux cleaned = 0.00366566 Jy ! Component: 200 - total flux cleaned = 0.00478042 Jy ! Total flux subtracted in 200 components = 0.00478042 Jy ! Clean residual min=-0.002310 max=0.002638 Jy/beam ! Clean residual mean=0.000001 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.460688 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 100 components and 0.460688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054330Jy sigma=0.447364 ! Fit after self-cal, rms=0.054304Jy sigma=0.446755 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054304Jy sigma=0.446755 ! Fit after self-cal, rms=0.053887Jy sigma=0.444632 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9407 mas, bmaj=1.507 mas, bpa=-7.218 degrees ! Estimated noise=0.528588 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128056 Jy ! Component: 100 - total flux cleaned = 0.00038038 Jy ! Component: 150 - total flux cleaned = 0.000832044 Jy ! Component: 200 - total flux cleaned = 0.00101216 Jy ! Total flux subtracted in 200 components = 0.00101216 Jy ! Clean residual min=-0.002038 max=0.002242 Jy/beam ! Clean residual mean=0.000001 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.4617 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 110 components and 0.4617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053709Jy sigma=0.442988 ! Fit after self-cal, rms=0.053716Jy sigma=0.442856 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.8, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126871 Jy ! Component: 100 - total flux cleaned = 0.00152853 Jy ! Component: 150 - total flux cleaned = 0.00158533 Jy ! Component: 200 - total flux cleaned = 0.00153386 Jy ! Total flux subtracted in 200 components = 0.00153386 Jy ! Clean residual min=-0.001827 max=0.001856 Jy/beam ! Clean residual mean=0.000001 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.463234 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 120 components and 0.463234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053577Jy sigma=0.441657 ! Fit after self-cal, rms=0.053573Jy sigma=0.441582 ! Inverting map ! Added new window around map position (19.6, 26.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100731 Jy ! Component: 100 - total flux cleaned = 0.00125585 Jy ! Component: 150 - total flux cleaned = 0.00134489 Jy ! Component: 200 - total flux cleaned = 0.00138589 Jy ! Total flux subtracted in 200 components = 0.00138589 Jy ! Clean residual min=-0.001676 max=0.001551 Jy/beam ! Clean residual mean=0.000001 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.464619 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 129 components and 0.46462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053481Jy sigma=0.440813 ! Fit after self-cal, rms=0.053480Jy sigma=0.440778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053480Jy sigma=0.440778 ! Fit after self-cal, rms=0.053397Jy sigma=0.440714 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9401 mas, bmaj=1.505 mas, bpa=-7.299 degrees ! Estimated noise=0.527736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177272 Jy ! Component: 100 - total flux cleaned = 0.000177738 Jy ! Component: 150 - total flux cleaned = 0.000254786 Jy ! Component: 200 - total flux cleaned = 0.000291531 Jy ! Total flux subtracted in 200 components = 0.000291531 Jy ! Clean residual min=-0.001542 max=0.001433 Jy/beam ! Clean residual mean=0.000001 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.464911 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 137 components and 0.464911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053339Jy sigma=0.440255 ! Fit after self-cal, rms=0.053340Jy sigma=0.440239 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.20754e-05 Jy ! Component: 100 - total flux cleaned = 6.49537e-05 Jy ! Component: 150 - total flux cleaned = 6.57076e-05 Jy ! Component: 200 - total flux cleaned = 0.000128941 Jy ! Total flux subtracted in 200 components = 0.000128941 Jy ! Clean residual min=-0.001430 max=0.001376 Jy/beam ! Clean residual mean=0.000001 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.46504 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 142 components and 0.46504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053298Jy sigma=0.439918 ! Fit after self-cal, rms=0.053299Jy sigma=0.439904 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053299Jy sigma=0.439904 ! Fit after self-cal, rms=0.053245Jy sigma=0.439894 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.22 mas, bmaj=2.655 mas, bpa=10.96 degrees ! Estimated noise=0.663945 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.74437e-05 Jy ! Component: 100 - total flux cleaned = 0.000257723 Jy ! Component: 150 - total flux cleaned = 0.000258297 Jy ! Component: 200 - total flux cleaned = 0.000238023 Jy ! Total flux subtracted in 200 components = 0.000238023 Jy ! Clean residual min=-0.001175 max=0.001346 Jy/beam ! Clean residual mean=0.000001 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.465278 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 155 components and 0.465278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053229Jy sigma=0.439758 ! Fit after self-cal, rms=0.053227Jy sigma=0.439735 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.85162e-05 Jy ! Component: 100 - total flux cleaned = 8.91616e-05 Jy ! Component: 150 - total flux cleaned = 0.000143948 Jy ! Component: 200 - total flux cleaned = 0.000193598 Jy ! Total flux subtracted in 200 components = 0.000193598 Jy ! Clean residual min=-0.001161 max=0.001330 Jy/beam ! Clean residual mean=0.000001 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.465472 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 159 components and 0.465472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053219Jy sigma=0.439666 ! Fit after self-cal, rms=0.053218Jy sigma=0.439653 ! Inverting map ! Added new window around map position (8.2, 47.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118169 Jy ! Component: 100 - total flux cleaned = 0.0013496 Jy ! Component: 150 - total flux cleaned = 0.00143386 Jy ! Component: 200 - total flux cleaned = 0.00153116 Jy ! Total flux subtracted in 200 components = 0.00153116 Jy ! Clean residual min=-0.001074 max=0.001008 Jy/beam ! Clean residual mean=0.000001 rms=0.000276 Jy/beam ! Combined flux in latest and established models = 0.467003 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 182 components and 0.467003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053192Jy sigma=0.439415 ! Fit after self-cal, rms=0.053189Jy sigma=0.439398 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9398 mas, bmaj=1.504 mas, bpa=-7.315 degrees ! Estimated noise=0.527306 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9398 x 1.504 at -7.315 degrees (North through East) ! Clean map min=-0.001431 max=0.13613 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7342 mas, bmaj=1.204 mas, bpa=-7.503 degrees ! Estimated noise=1.13872 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130164 Jy ! Component: 100 - total flux cleaned = 0.19547 Jy ! Component: 150 - total flux cleaned = 0.239281 Jy ! Component: 200 - total flux cleaned = 0.273224 Jy ! Total flux subtracted in 200 components = 0.273224 Jy ! Clean residual min=-0.011106 max=0.020108 Jy/beam ! Clean residual mean=-0.000010 rms=0.002928 Jy/beam ! Combined flux in latest and established models = 0.273224 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.273224 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9398 mas, bmaj=1.504 mas, bpa=-7.315 degrees ! Estimated noise=0.527306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433939 Jy ! Component: 100 - total flux cleaned = 0.0747461 Jy ! Component: 150 - total flux cleaned = 0.0980864 Jy ! Component: 200 - total flux cleaned = 0.115653 Jy ! Total flux subtracted in 200 components = 0.115653 Jy ! Clean residual min=-0.005321 max=0.010166 Jy/beam ! Clean residual mean=-0.000015 rms=0.001771 Jy/beam ! Combined flux in latest and established models = 0.388876 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 50 components and 0.388876 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134221 Jy ! Component: 100 - total flux cleaned = 0.0238904 Jy ! Component: 150 - total flux cleaned = 0.0321736 Jy ! Component: 200 - total flux cleaned = 0.03883 Jy ! Total flux subtracted in 200 components = 0.03883 Jy ! Clean residual min=-0.002741 max=0.004159 Jy/beam ! Clean residual mean=-0.000006 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.427706 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 78 components and 0.427706 Jy ! Inverting map ! Added new window around map position (-2, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00544912 Jy ! Component: 100 - total flux cleaned = 0.00991271 Jy ! Component: 150 - total flux cleaned = 0.0136127 Jy ! Component: 200 - total flux cleaned = 0.0167168 Jy ! Total flux subtracted in 200 components = 0.0167168 Jy ! Clean residual min=-0.001726 max=0.002162 Jy/beam ! Clean residual mean=-0.000003 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.444423 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 105 components and 0.444423 Jy ! Inverting map ! Added new window around map position (-0.2, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268612 Jy ! Component: 100 - total flux cleaned = 0.00496028 Jy ! Component: 150 - total flux cleaned = 0.00694272 Jy ! Component: 200 - total flux cleaned = 0.00869142 Jy ! Total flux subtracted in 200 components = 0.00869142 Jy ! Clean residual min=-0.001442 max=0.001512 Jy/beam ! Clean residual mean=-0.000002 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.453115 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 128 components and 0.453115 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.22 mas, bmaj=2.655 mas, bpa=10.96 degrees ! Estimated noise=0.663945 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254746 Jy ! Component: 100 - total flux cleaned = 0.00443498 Jy ! Component: 150 - total flux cleaned = 0.00599942 Jy ! Component: 200 - total flux cleaned = 0.00732411 Jy ! Total flux subtracted in 200 components = 0.00732411 Jy ! Clean residual min=-0.001380 max=0.001336 Jy/beam ! Clean residual mean=-0.000002 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.460439 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011381 Jy ! Component: 100 - total flux cleaned = 0.00212461 Jy ! Component: 150 - total flux cleaned = 0.00299202 Jy ! Component: 200 - total flux cleaned = 0.00376509 Jy ! Total flux subtracted in 200 components = 0.00376509 Jy ! Clean residual min=-0.001246 max=0.001086 Jy/beam ! Clean residual mean=-0.000001 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.464204 Jy ! Adding 101 model components to the UV plane model. ! The established model now contains 211 components and 0.464204 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9398 mas, bmaj=1.504 mas, bpa=-7.315 degrees ! Estimated noise=0.527306 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.66979e-05 Jy ! Component: 100 - total flux cleaned = 0.000273961 Jy ! Component: 150 - total flux cleaned = 0.000548248 Jy ! Component: 200 - total flux cleaned = 0.000737317 Jy ! Total flux subtracted in 200 components = 0.000737317 Jy ! Clean residual min=-0.001267 max=0.001097 Jy/beam ! Clean residual mean=-0.000000 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.464941 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 231 components and 0.464941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053148Jy sigma=0.439152 ! Fit after self-cal, rms=0.053097Jy sigma=0.438787 wmodel J1845+3541_X_map.mod ! Writing 231 model components to file: J1845+3541_X_map.mod wobs J1845+3541_X_uvs.fits ! Writing UV FITS file: J1845+3541_X_uvs.fits wwins J1845+3541_X_map.win ! wwins: Wrote 11 windows to J1845+3541_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000301335 Jy ! Component: 100 - total flux cleaned = 0.000539184 Jy ! Component: 150 - total flux cleaned = 0.00072492 Jy ! Component: 200 - total flux cleaned = 0.000866125 Jy ! Component: 250 - total flux cleaned = 0.000968552 Jy ! Component: 300 - total flux cleaned = 0.00100166 Jy ! Component: 350 - total flux cleaned = 0.00106662 Jy ! Component: 400 - total flux cleaned = 0.00112989 Jy ! Component: 450 - total flux cleaned = 0.00119181 Jy ! Component: 500 - total flux cleaned = 0.00119166 Jy ! Component: 550 - total flux cleaned = 0.00122172 Jy ! Component: 600 - total flux cleaned = 0.00125124 Jy ! Component: 650 - total flux cleaned = 0.00122209 Jy ! Component: 700 - total flux cleaned = 0.0012652 Jy ! Component: 750 - total flux cleaned = 0.00125109 Jy ! Component: 800 - total flux cleaned = 0.00125082 Jy ! Component: 850 - total flux cleaned = 0.00118196 Jy ! Component: 900 - total flux cleaned = 0.00118203 Jy ! Component: 950 - total flux cleaned = 0.00116856 Jy ! Component: 1000 - total flux cleaned = 0.00115553 Jy ! Component: 1050 - total flux cleaned = 0.00118196 Jy ! Component: 1100 - total flux cleaned = 0.00115594 Jy ! Component: 1150 - total flux cleaned = 0.00118187 Jy ! Component: 1200 - total flux cleaned = 0.00118206 Jy ! Component: 1250 - total flux cleaned = 0.00120721 Jy ! Component: 1300 - total flux cleaned = 0.00123221 Jy ! Component: 1350 - total flux cleaned = 0.001232 Jy ! Component: 1400 - total flux cleaned = 0.00123191 Jy ! Component: 1450 - total flux cleaned = 0.00123195 Jy ! Component: 1500 - total flux cleaned = 0.00126777 Jy ! Component: 1550 - total flux cleaned = 0.00120858 Jy ! Component: 1600 - total flux cleaned = 0.00120875 Jy ! Component: 1650 - total flux cleaned = 0.00124375 Jy ! Component: 1700 - total flux cleaned = 0.00125523 Jy ! Component: 1750 - total flux cleaned = 0.00126675 Jy ! Component: 1800 - total flux cleaned = 0.00126675 Jy ! Component: 1850 - total flux cleaned = 0.00124431 Jy ! Component: 1900 - total flux cleaned = 0.00128893 Jy ! Component: 1950 - total flux cleaned = 0.00131099 Jy ! Component: 2000 - total flux cleaned = 0.00127827 Jy ! Component: 2050 - total flux cleaned = 0.00128902 Jy ! Component: 2100 - total flux cleaned = 0.00125668 Jy ! Component: 2150 - total flux cleaned = 0.00125673 Jy ! Component: 2200 - total flux cleaned = 0.00128869 Jy ! Component: 2250 - total flux cleaned = 0.00124662 Jy ! Component: 2300 - total flux cleaned = 0.00121514 Jy ! Component: 2350 - total flux cleaned = 0.0012463 Jy ! Component: 2400 - total flux cleaned = 0.00126687 Jy ! Component: 2450 - total flux cleaned = 0.00125664 Jy ! Component: 2500 - total flux cleaned = 0.00120572 Jy ! Component: 2550 - total flux cleaned = 0.00120567 Jy ! Component: 2600 - total flux cleaned = 0.00115528 Jy ! Component: 2650 - total flux cleaned = 0.0011354 Jy ! Component: 2700 - total flux cleaned = 0.00114526 Jy ! Component: 2750 - total flux cleaned = 0.00113544 Jy ! Component: 2800 - total flux cleaned = 0.00116476 Jy ! Component: 2850 - total flux cleaned = 0.00113554 Jy ! Component: 2900 - total flux cleaned = 0.00115491 Jy ! Component: 2950 - total flux cleaned = 0.00120274 Jy ! Component: 3000 - total flux cleaned = 0.0011742 Jy ! Component: 3050 - total flux cleaned = 0.00117418 Jy ! Component: 3100 - total flux cleaned = 0.00120237 Jy ! Component: 3150 - total flux cleaned = 0.00117429 Jy ! Component: 3200 - total flux cleaned = 0.00119299 Jy ! Component: 3250 - total flux cleaned = 0.00122992 Jy ! Component: 3300 - total flux cleaned = 0.00121158 Jy ! Component: 3350 - total flux cleaned = 0.00122067 Jy ! Component: 3400 - total flux cleaned = 0.00118436 Jy ! Component: 3450 - total flux cleaned = 0.00117527 Jy ! Component: 3500 - total flux cleaned = 0.00122015 Jy ! Component: 3550 - total flux cleaned = 0.00122011 Jy ! Component: 3600 - total flux cleaned = 0.00114892 Jy ! Component: 3650 - total flux cleaned = 0.00118436 Jy ! Component: 3700 - total flux cleaned = 0.00114921 Jy ! Component: 3750 - total flux cleaned = 0.00115793 Jy ! Component: 3800 - total flux cleaned = 0.00114061 Jy ! Component: 3850 - total flux cleaned = 0.00109744 Jy ! Component: 3900 - total flux cleaned = 0.00110604 Jy ! Component: 3950 - total flux cleaned = 0.00110599 Jy ! Component: 4000 - total flux cleaned = 0.00108909 Jy ! Component: 4050 - total flux cleaned = 0.00105525 Jy ! Total flux subtracted in 4096 components = 0.00108055 Jy ! Clean residual min=-0.000455 max=0.000581 Jy/beam ! Clean residual mean=-0.000000 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.466022 Jy keep ! Adding 320 model components to the UV plane model. ! The established model now contains 551 components and 0.466022 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1845+3541_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9398 x 1.504 at -7.315 degrees (North through East) ! Clean map min=-0.00079815 max=0.13554 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1845+3541_X_map.fits wmodel /image_prod/ug002_uva//J1845+3541_X_map.mod ! Writing 551 model components to file: /image_prod/ug002_uva//J1845+3541_X_map.mod wobs /image_prod/ug002_uva//J1845+3541_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1845+3541_X_uvs.fits wwins /image_prod/ug002_uva//J1845+3541_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J1845+3541_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.135544 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000139537 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.308838 0.308838 0.617675 1.23535 2.4707 4.9414 9.88281 19.7656 39.5312 79.0624 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.135 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 971.384 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1845+3541_X_dfm.log closed on Thu Mar 5 03:54:38 2020