! Started logfile: /image_prod/ug002_uva//J1824+0119_S_dfm.log on Thu Mar  5 03:43:04 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1824+0119_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1824+0119_S_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.907037 visibilities/baseline/integration-bin.
! Found source: J1824+0119
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 7347 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1824+0119_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.018340Jy  sigma=8.127919
! Fit after  self-cal, rms=0.832622Jy  sigma=6.661578
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.179 mas, bmaj=13.62 mas, bpa=-17.73 degrees
! Estimated noise=1.30303 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.129966 Jy
! Component: 100  -  total flux cleaned = 0.15853 Jy
! Total flux subtracted in 100 components = 0.15853 Jy
! Clean residual min=-0.007292 max=0.011236 Jy/beam
! Clean residual mean=0.000030 rms=0.002394 Jy/beam
! Combined flux in latest and established models = 0.15853 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.15853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082479Jy  sigma=0.544572
! Fit after  self-cal, rms=0.082448Jy  sigma=0.544505
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.818 mas, bmaj=13.91 mas, bpa=-17.3 degrees
! Estimated noise=1.0708 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124086 Jy
! Component: 100  -  total flux cleaned = 0.0194717 Jy
! Component: 150  -  total flux cleaned = 0.0238217 Jy
! Component: 200  -  total flux cleaned = 0.0265367 Jy
! Total flux subtracted in 200 components = 0.0265367 Jy
! Clean residual min=-0.007512 max=0.007869 Jy/beam
! Clean residual mean=-0.000002 rms=0.001790 Jy/beam
! Combined flux in latest and established models = 0.185066 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 37 components and 0.185066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080315Jy  sigma=0.527452
! Fit after  self-cal, rms=0.080325Jy  sigma=0.527345
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.818 x 13.91 at -17.3 degrees (North through East)
! Clean map  min=-0.0072598  max=0.16834 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.98     KP        0.97     
!   LA        1.24     MK        1.15     NL        1.07     OV        0.93     
!   PT        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.98     HN        0.96     KP        0.96     
!   LA        0.98     MK        1.05     NL        1.10     OV        0.98     
!   PT        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.99     KP        0.96     
!   LA        0.98     MK        0.97     NL        1.09     OV        0.94     
!   PT        0.98     
! 
! 
! Fit before self-cal, rms=0.080325Jy  sigma=0.527345
! Fit after  self-cal, rms=0.082050Jy  sigma=0.512875
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.868 mas, bmaj=13.9 mas, bpa=-17.05 degrees
! Estimated noise=1.08114 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000593839 Jy
! Component: 100  -  total flux cleaned = -0.00102606 Jy
! Component: 150  -  total flux cleaned = -0.00128741 Jy
! Component: 200  -  total flux cleaned = -0.00150104 Jy
! Total flux subtracted in 200 components = -0.00150104 Jy
! Clean residual min=-0.007917 max=0.007420 Jy/beam
! Clean residual mean=-0.000002 rms=0.001620 Jy/beam
! Combined flux in latest and established models = 0.183565 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 48 components and 0.183565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081628Jy  sigma=0.512013
! Fit after  self-cal, rms=0.081675Jy  sigma=0.511900
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081675Jy  sigma=0.511900
! Fit after  self-cal, rms=0.076754Jy  sigma=0.457732
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.886 mas, bmaj=14.07 mas, bpa=-17.18 degrees
! Estimated noise=1.09389 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115948 Jy
! Component: 100  -  total flux cleaned = 0.00105622 Jy
! Component: 150  -  total flux cleaned = 0.000919171 Jy
! Component: 200  -  total flux cleaned = 0.000805007 Jy
! Total flux subtracted in 200 components = 0.000805007 Jy
! Clean residual min=-0.002393 max=0.002481 Jy/beam
! Clean residual mean=-0.000005 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.18437 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 58 components and 0.18437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076676Jy  sigma=0.456977
! Fit after  self-cal, rms=0.076779Jy  sigma=0.456671
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000225729 Jy
! Component: 100  -  total flux cleaned = -0.000226258 Jy
! Component: 150  -  total flux cleaned = -0.000226372 Jy
! Component: 200  -  total flux cleaned = -0.000184295 Jy
! Total flux subtracted in 200 components = -0.000184295 Jy
! Clean residual min=-0.002346 max=0.002437 Jy/beam
! Clean residual mean=-0.000005 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.184186 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 71 components and 0.184186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076761Jy  sigma=0.456538
! Fit after  self-cal, rms=0.076759Jy  sigma=0.456533
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076759Jy  sigma=0.456533
! Fit after  self-cal, rms=0.077421Jy  sigma=0.453040
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.879 mas, bmaj=14.07 mas, bpa=-17.25 degrees
! Estimated noise=1.09096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115765 Jy
! Component: 100  -  total flux cleaned = 4.16403e-05 Jy
! Component: 150  -  total flux cleaned = -2.42619e-05 Jy
! Component: 200  -  total flux cleaned = -9.99427e-05 Jy
! Total flux subtracted in 200 components = -9.99427e-05 Jy
! Clean residual min=-0.001895 max=0.001793 Jy/beam
! Clean residual mean=0.000002 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.184086 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 88 components and 0.184086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077404Jy  sigma=0.452932
! Fit after  self-cal, rms=0.077411Jy  sigma=0.452904
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.98011e-05 Jy
! Component: 100  -  total flux cleaned = 4.65587e-06 Jy
! Component: 150  -  total flux cleaned = -2.43447e-05 Jy
! Component: 200  -  total flux cleaned = -2.51539e-05 Jy
! Total flux subtracted in 200 components = -2.51539e-05 Jy
! Clean residual min=-0.001871 max=0.001787 Jy/beam
! Clean residual mean=0.000002 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.184061 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 96 components and 0.184061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077402Jy  sigma=0.452866
! Fit after  self-cal, rms=0.077402Jy  sigma=0.452862
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077402Jy  sigma=0.452862
! Fit after  self-cal, rms=0.077403Jy  sigma=0.452840
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.347 mas, bmaj=14.66 mas, bpa=-10.05 degrees
! Estimated noise=1.22371 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000142487 Jy
! Component: 100  -  total flux cleaned = -0.00020555 Jy
! Component: 150  -  total flux cleaned = -0.000233466 Jy
! Component: 200  -  total flux cleaned = -0.000251003 Jy
! Total flux subtracted in 200 components = -0.000251003 Jy
! Clean residual min=-0.001854 max=0.001788 Jy/beam
! Clean residual mean=0.000004 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.18381 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 102 components and 0.18381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077401Jy  sigma=0.452823
! Fit after  self-cal, rms=0.077400Jy  sigma=0.452822
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.55621e-05 Jy
! Component: 100  -  total flux cleaned = -5.12108e-05 Jy
! Component: 150  -  total flux cleaned = -7.54298e-05 Jy
! Component: 200  -  total flux cleaned = -9.81736e-05 Jy
! Total flux subtracted in 200 components = -9.81736e-05 Jy
! Clean residual min=-0.001852 max=0.001786 Jy/beam
! Clean residual mean=0.000004 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.183712 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 105 components and 0.183712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077398Jy  sigma=0.452816
! Fit after  self-cal, rms=0.077398Jy  sigma=0.452816
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.874 mas, bmaj=14.08 mas, bpa=-17.27 degrees
! Estimated noise=1.09047 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.874 x 14.08 at -17.27 degrees (North through East)
! Clean map  min=-0.0017714  max=0.17149 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.228 mas, bmaj=13.78 mas, bpa=-17.64 degrees
! Estimated noise=1.34571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.134178 Jy
! Component: 100  -  total flux cleaned = 0.1635 Jy
! Component: 150  -  total flux cleaned = 0.1721 Jy
! Component: 200  -  total flux cleaned = 0.176909 Jy
! Total flux subtracted in 200 components = 0.176909 Jy
! Clean residual min=-0.002765 max=0.003282 Jy/beam
! Clean residual mean=0.000009 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.176909 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.176909 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.874 mas, bmaj=14.08 mas, bpa=-17.27 degrees
! Estimated noise=1.09047 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00345764 Jy
! Component: 100  -  total flux cleaned = 0.00551653 Jy
! Component: 150  -  total flux cleaned = 0.00635072 Jy
! Component: 200  -  total flux cleaned = 0.00660878 Jy
! Total flux subtracted in 200 components = 0.00660878 Jy
! Clean residual min=-0.002112 max=0.001869 Jy/beam
! Clean residual mean=0.000003 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.183517 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 49 components and 0.183517 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.347 mas, bmaj=14.66 mas, bpa=-10.05 degrees
! Estimated noise=1.22371 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000540305 Jy
! Component: 100  -  total flux cleaned = 0.000557898 Jy
! Component: 150  -  total flux cleaned = 0.000544557 Jy
! Component: 200  -  total flux cleaned = 0.000520946 Jy
! Total flux subtracted in 200 components = 0.000520946 Jy
! Clean residual min=-0.001805 max=0.001860 Jy/beam
! Clean residual mean=0.000004 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.184038 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.20935e-05 Jy
! Component: 100  -  total flux cleaned = -5.27016e-05 Jy
! Component: 150  -  total flux cleaned = -7.23816e-05 Jy
! Component: 200  -  total flux cleaned = -9.11098e-05 Jy
! Total flux subtracted in 200 components = -9.11098e-05 Jy
! Clean residual min=-0.001809 max=0.001855 Jy/beam
! Clean residual mean=0.000004 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.183947 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 74 components and 0.183947 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.874 mas, bmaj=14.08 mas, bpa=-17.27 degrees
! Estimated noise=1.09047 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.89786e-05 Jy
! Component: 100  -  total flux cleaned = 0.000156183 Jy
! Component: 150  -  total flux cleaned = 0.000180892 Jy
! Component: 200  -  total flux cleaned = 0.000203029 Jy
! Total flux subtracted in 200 components = 0.000203029 Jy
! Clean residual min=-0.002017 max=0.001830 Jy/beam
! Clean residual mean=0.000003 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.18415 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 86 components and 0.18415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077402Jy  sigma=0.452944
! Fit after  self-cal, rms=0.077402Jy  sigma=0.452918
wmodel J1824+0119_S_map.mod
! Writing 86 model components to file: J1824+0119_S_map.mod
wobs   J1824+0119_S_uvs.fits
! Writing UV FITS file: J1824+0119_S_uvs.fits
wwins  J1824+0119_S_map.win
! wwins: Wrote 1 windows to J1824+0119_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -1.52761e-05 Jy
! Component: 100  -  total flux cleaned = 0.000143062 Jy
! Component: 150  -  total flux cleaned = 0.00014365 Jy
! Component: 200  -  total flux cleaned = 0.000172387 Jy
! Component: 250  -  total flux cleaned = 0.000144695 Jy
! Component: 300  -  total flux cleaned = 0.000117869 Jy
! Component: 350  -  total flux cleaned = 9.11874e-05 Jy
! Component: 400  -  total flux cleaned = 9.10534e-05 Jy
! Component: 450  -  total flux cleaned = -9.60327e-06 Jy
! Component: 500  -  total flux cleaned = -3.37123e-05 Jy
! Component: 550  -  total flux cleaned = -8.20278e-05 Jy
! Component: 600  -  total flux cleaned = -0.000128628 Jy
! Component: 650  -  total flux cleaned = -0.000197716 Jy
! Component: 700  -  total flux cleaned = -0.00019823 Jy
! Component: 750  -  total flux cleaned = -0.000220485 Jy
! Component: 800  -  total flux cleaned = -0.000199344 Jy
! Component: 850  -  total flux cleaned = -0.000284805 Jy
! Component: 900  -  total flux cleaned = -0.000284665 Jy
! Component: 950  -  total flux cleaned = -0.000305222 Jy
! Component: 1000  -  total flux cleaned = -0.000305096 Jy
! Component: 1050  -  total flux cleaned = -0.000265195 Jy
! Component: 1100  -  total flux cleaned = -0.000304712 Jy
! Component: 1150  -  total flux cleaned = -0.000266234 Jy
! Component: 1200  -  total flux cleaned = -0.000285403 Jy
! Component: 1250  -  total flux cleaned = -0.000266863 Jy
! Component: 1300  -  total flux cleaned = -0.00026669 Jy
! Component: 1350  -  total flux cleaned = -0.000230148 Jy
! Component: 1400  -  total flux cleaned = -0.000230198 Jy
! Component: 1450  -  total flux cleaned = -0.000266104 Jy
! Component: 1500  -  total flux cleaned = -0.000248395 Jy
! Component: 1550  -  total flux cleaned = -0.000248261 Jy
! Component: 1600  -  total flux cleaned = -0.000162973 Jy
! Component: 1650  -  total flux cleaned = -0.000214069 Jy
! Component: 1700  -  total flux cleaned = -0.000247416 Jy
! Component: 1750  -  total flux cleaned = -0.000214434 Jy
! Component: 1800  -  total flux cleaned = -0.000263356 Jy
! Component: 1850  -  total flux cleaned = -0.000262962 Jy
! Component: 1900  -  total flux cleaned = -0.000215146 Jy
! Component: 1950  -  total flux cleaned = -0.000167934 Jy
! Component: 2000  -  total flux cleaned = -0.000136797 Jy
! Component: 2050  -  total flux cleaned = -9.05371e-05 Jy
! Component: 2100  -  total flux cleaned = -4.49765e-05 Jy
! Component: 2150  -  total flux cleaned = -1.4628e-05 Jy
! Component: 2200  -  total flux cleaned = 0.000104943 Jy
! Component: 2250  -  total flux cleaned = 0.00017872 Jy
! Component: 2300  -  total flux cleaned = 0.000251807 Jy
! Component: 2350  -  total flux cleaned = 0.000295184 Jy
! Component: 2400  -  total flux cleaned = 0.000395484 Jy
! Component: 2450  -  total flux cleaned = 0.000452436 Jy
! Component: 2500  -  total flux cleaned = 0.000550675 Jy
! Component: 2550  -  total flux cleaned = 0.000606191 Jy
! Component: 2600  -  total flux cleaned = 0.000661475 Jy
! Component: 2650  -  total flux cleaned = 0.000770857 Jy
! Component: 2700  -  total flux cleaned = 0.000851847 Jy
! Component: 2750  -  total flux cleaned = 0.000891861 Jy
! Component: 2800  -  total flux cleaned = 0.00095806 Jy
! Component: 2850  -  total flux cleaned = 0.000997362 Jy
! Component: 2900  -  total flux cleaned = 0.00104967 Jy
! Component: 2950  -  total flux cleaned = 0.00114024 Jy
! Component: 3000  -  total flux cleaned = 0.00121695 Jy
! Component: 3050  -  total flux cleaned = 0.00126774 Jy
! Component: 3100  -  total flux cleaned = 0.00134325 Jy
! Component: 3150  -  total flux cleaned = 0.00145548 Jy
! Component: 3200  -  total flux cleaned = 0.0015048 Jy
! Component: 3250  -  total flux cleaned = 0.00162735 Jy
! Component: 3300  -  total flux cleaned = 0.00171241 Jy
! Component: 3350  -  total flux cleaned = 0.00180889 Jy
! Component: 3400  -  total flux cleaned = 0.00190462 Jy
! Component: 3450  -  total flux cleaned = 0.00201143 Jy
! Component: 3500  -  total flux cleaned = 0.00212927 Jy
! Component: 3550  -  total flux cleaned = 0.00221099 Jy
! Component: 3600  -  total flux cleaned = 0.00229219 Jy
! Component: 3650  -  total flux cleaned = 0.00240742 Jy
! Component: 3700  -  total flux cleaned = 0.00249897 Jy
! Component: 3750  -  total flux cleaned = 0.00258992 Jy
! Component: 3800  -  total flux cleaned = 0.00270271 Jy
! Component: 3850  -  total flux cleaned = 0.00279242 Jy
! Component: 3900  -  total flux cleaned = 0.00290354 Jy
! Component: 3950  -  total flux cleaned = 0.00295879 Jy
! Component: 4000  -  total flux cleaned = 0.0030356 Jy
! Component: 4050  -  total flux cleaned = 0.00310096 Jy
! Total flux subtracted in 4096 components = 0.00319841 Jy
! Clean residual min=-0.000619 max=0.000591 Jy/beam
! Clean residual mean=0.000001 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.187349 Jy
keep
! Adding 278 model components to the UV plane model.
! The established model now contains 364 components and 0.187349 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1824+0119_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.874 x 14.08 at -17.27 degrees (North through East)
! Clean map  min=-0.0014392  max=0.17159 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1824+0119_S_map.fits
wmodel /image_prod/ug002_uva//J1824+0119_S_map.mod
! Writing 364 model components to file: /image_prod/ug002_uva//J1824+0119_S_map.mod
wobs   /image_prod/ug002_uva//J1824+0119_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1824+0119_S_uvs.fits
wwins  /image_prod/ug002_uva//J1824+0119_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1824+0119_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.171585 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000209738 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.366707 0.366707 0.733413 1.46683 2.93365 5.86731 11.7346 23.4692 46.9384 93.8769
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.171 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  818.092 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1824+0119_S_dfm.log closed on Thu Mar  5 03:43:08 2020