! Started logfile: /image_prod/ug002_uva//J1819+3845_S_dfm.log on Thu Mar  5 03:41:27 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1819+3845_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1819+3845_S_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.785926 visibilities/baseline/integration-bin.
! Found source: J1819+3845
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6366 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1819+3845_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013793Jy  sigma=8.950754
! Fit after  self-cal, rms=0.876574Jy  sigma=7.696321
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.061 mas, bmaj=5.409 mas, bpa=-17.01 degrees
! Estimated noise=1.64253 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101555 Jy
! Component: 100  -  total flux cleaned = 0.123864 Jy
! Total flux subtracted in 100 components = 0.123864 Jy
! Clean residual min=-0.006305 max=0.007151 Jy/beam
! Clean residual mean=0.000009 rms=0.001721 Jy/beam
! Combined flux in latest and established models = 0.123864 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.123864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090324Jy  sigma=0.512681
! Fit after  self-cal, rms=0.090237Jy  sigma=0.512367
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.659 mas, bmaj=6.082 mas, bpa=-15.82 degrees
! Estimated noise=1.05973 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00555164 Jy
! Component: 100  -  total flux cleaned = 0.00555473 Jy
! Component: 150  -  total flux cleaned = 0.00555372 Jy
! Component: 200  -  total flux cleaned = 0.00564347 Jy
! Total flux subtracted in 200 components = 0.00564347 Jy
! Clean residual min=-0.006166 max=0.005164 Jy/beam
! Clean residual mean=-0.000002 rms=0.001377 Jy/beam
! Combined flux in latest and established models = 0.129508 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 16 components and 0.129508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089680Jy  sigma=0.505088
! Fit after  self-cal, rms=0.089639Jy  sigma=0.504977
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.659 x 6.082 at -15.82 degrees (North through East)
! Clean map  min=-0.0059225  max=0.12912 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.04     KP        1.03     
!   LA        1.00     MK        1.04     NL        1.03     OV        0.85     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.00     HN        0.99     KP        0.99     
!   LA        0.97     MK        0.95     NL        0.92     OV        1.19     
!   PT        1.01     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.01     KP        1.01     
!   LA        1.04     MK        0.99     NL        0.90     OV        0.77     
!   PT        1.02     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.089639Jy  sigma=0.504977
! Fit after  self-cal, rms=0.085095Jy  sigma=0.494550
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.662 mas, bmaj=6.046 mas, bpa=-15.47 degrees
! Estimated noise=1.03599 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00161616 Jy
! Component: 100  -  total flux cleaned = -0.00190358 Jy
! Component: 150  -  total flux cleaned = -0.00217944 Jy
! Component: 200  -  total flux cleaned = -0.0023565 Jy
! Total flux subtracted in 200 components = -0.0023565 Jy
! Clean residual min=-0.005592 max=0.005064 Jy/beam
! Clean residual mean=0.000002 rms=0.001291 Jy/beam
! Combined flux in latest and established models = 0.127151 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 26 components and 0.127151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084948Jy  sigma=0.494167
! Fit after  self-cal, rms=0.084984Jy  sigma=0.493975
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084984Jy  sigma=0.493975
! Fit after  self-cal, rms=0.187080Jy  sigma=0.464494
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.648 mas, bmaj=6.049 mas, bpa=-15.31 degrees
! Estimated noise=1.03844 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000169191 Jy
! Component: 100  -  total flux cleaned = -0.000116212 Jy
! Component: 150  -  total flux cleaned = -9.61433e-05 Jy
! Component: 200  -  total flux cleaned = -6.09117e-05 Jy
! Total flux subtracted in 200 components = -6.09117e-05 Jy
! Clean residual min=-0.001980 max=0.002138 Jy/beam
! Clean residual mean=0.000007 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.127091 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 33 components and 0.12709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.187069Jy  sigma=0.464334
! Fit after  self-cal, rms=0.187820Jy  sigma=0.463728
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-49.5, -42).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000801037 Jy
! Component: 100  -  total flux cleaned = 0.000708567 Jy
! Component: 150  -  total flux cleaned = 0.000637706 Jy
! Component: 200  -  total flux cleaned = 0.000512185 Jy
! Total flux subtracted in 200 components = 0.000512185 Jy
! Clean residual min=-0.001801 max=0.001649 Jy/beam
! Clean residual mean=0.000007 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.127603 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 59 components and 0.127603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.187769Jy  sigma=0.463047
! Fit after  self-cal, rms=0.187868Jy  sigma=0.463016
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.187868Jy  sigma=0.463016
! Fit after  self-cal, rms=0.195260Jy  sigma=0.462934
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.644 mas, bmaj=6.042 mas, bpa=-15.17 degrees
! Estimated noise=1.03786 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.2975e-05 Jy
! Component: 100  -  total flux cleaned = -1.24501e-05 Jy
! Component: 150  -  total flux cleaned = -6.25541e-05 Jy
! Component: 200  -  total flux cleaned = -6.18455e-05 Jy
! Total flux subtracted in 200 components = -6.18455e-05 Jy
! Clean residual min=-0.001741 max=0.001633 Jy/beam
! Clean residual mean=0.000007 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.127541 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 64 components and 0.127541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.195247Jy  sigma=0.462733
! Fit after  self-cal, rms=0.195320Jy  sigma=0.462726
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.62701e-05 Jy
! Component: 100  -  total flux cleaned = -7.60757e-05 Jy
! Component: 150  -  total flux cleaned = -9.62765e-05 Jy
! Component: 200  -  total flux cleaned = -9.5278e-05 Jy
! Total flux subtracted in 200 components = -9.5278e-05 Jy
! Clean residual min=-0.001731 max=0.001625 Jy/beam
! Clean residual mean=0.000007 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.127446 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 70 components and 0.127446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.195311Jy  sigma=0.462620
! Fit after  self-cal, rms=0.195337Jy  sigma=0.462617
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.195337Jy  sigma=0.462617
! Fit after  self-cal, rms=0.195336Jy  sigma=0.462601
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.141 mas, bmaj=9.354 mas, bpa=-24.2 degrees
! Estimated noise=1.2457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000216261 Jy
! Component: 100  -  total flux cleaned = 0.000252038 Jy
! Component: 150  -  total flux cleaned = 0.000296838 Jy
! Component: 200  -  total flux cleaned = 0.000309649 Jy
! Total flux subtracted in 200 components = 0.000309649 Jy
! Clean residual min=-0.001808 max=0.001774 Jy/beam
! Clean residual mean=0.000013 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.127755 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 81 components and 0.127755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.195338Jy  sigma=0.462548
! Fit after  self-cal, rms=0.195349Jy  sigma=0.462540
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.94569e-05 Jy
! Component: 100  -  total flux cleaned = 6.22366e-06 Jy
! Component: 150  -  total flux cleaned = 6.39446e-06 Jy
! Component: 200  -  total flux cleaned = -3.43505e-06 Jy
! Total flux subtracted in 200 components = -3.43505e-06 Jy
! Clean residual min=-0.001789 max=0.001751 Jy/beam
! Clean residual mean=0.000013 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.127752 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 84 components and 0.127752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.195351Jy  sigma=0.462538
! Fit after  self-cal, rms=0.195351Jy  sigma=0.462535
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.641 mas, bmaj=6.04 mas, bpa=-15.15 degrees
! Estimated noise=1.03773 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.641 x 6.04 at -15.15 degrees (North through East)
! Clean map  min=-0.0017065  max=0.12691 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.055 mas, bmaj=5.383 mas, bpa=-16.47 degrees
! Estimated noise=1.59301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0983945 Jy
! Component: 100  -  total flux cleaned = 0.120102 Jy
! Component: 150  -  total flux cleaned = 0.127048 Jy
! Component: 200  -  total flux cleaned = 0.127735 Jy
! Total flux subtracted in 200 components = 0.127735 Jy
! Clean residual min=-0.003134 max=0.003452 Jy/beam
! Clean residual mean=0.000004 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.127735 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.127735 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.641 mas, bmaj=6.04 mas, bpa=-15.15 degrees
! Estimated noise=1.03773 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-113.5, -87.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171191 Jy
! Component: 100  -  total flux cleaned = 0.00231638 Jy
! Component: 150  -  total flux cleaned = 0.00231847 Jy
! Component: 200  -  total flux cleaned = 0.00219038 Jy
! Total flux subtracted in 200 components = 0.00219038 Jy
! Clean residual min=-0.001817 max=0.001820 Jy/beam
! Clean residual mean=0.000008 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.129925 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 22 components and 0.129925 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.141 mas, bmaj=9.354 mas, bpa=-24.2 degrees
! Estimated noise=1.2457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000560243 Jy
! Component: 100  -  total flux cleaned = -0.00080268 Jy
! Component: 150  -  total flux cleaned = -0.000888263 Jy
! Component: 200  -  total flux cleaned = -0.00101412 Jy
! Total flux subtracted in 200 components = -0.00101412 Jy
! Clean residual min=-0.001735 max=0.001646 Jy/beam
! Clean residual mean=0.000012 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.128911 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.48613e-05 Jy
! Component: 100  -  total flux cleaned = -8.49016e-05 Jy
! Component: 150  -  total flux cleaned = -0.000104284 Jy
! Component: 200  -  total flux cleaned = -0.00017406 Jy
! Total flux subtracted in 200 components = -0.00017406 Jy
! Clean residual min=-0.001693 max=0.001623 Jy/beam
! Clean residual mean=0.000013 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.128737 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 55 components and 0.128737 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.641 mas, bmaj=6.04 mas, bpa=-15.15 degrees
! Estimated noise=1.03773 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000225037 Jy
! Component: 100  -  total flux cleaned = -0.00045775 Jy
! Component: 150  -  total flux cleaned = -0.000538918 Jy
! Component: 200  -  total flux cleaned = -0.000614408 Jy
! Total flux subtracted in 200 components = -0.000614408 Jy
! Clean residual min=-0.001705 max=0.001646 Jy/beam
! Clean residual mean=0.000007 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.128123 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 71 components and 0.128123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.195341Jy  sigma=0.462826
! Fit after  self-cal, rms=0.195330Jy  sigma=0.462769
wmodel J1819+3845_S_map.mod
! Writing 71 model components to file: J1819+3845_S_map.mod
wobs   J1819+3845_S_uvs.fits
! Writing UV FITS file: J1819+3845_S_uvs.fits
wwins  J1819+3845_S_map.win
! wwins: Wrote 3 windows to J1819+3845_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000381329 Jy
! Component: 100  -  total flux cleaned = -0.000613142 Jy
! Component: 150  -  total flux cleaned = -0.000862681 Jy
! Component: 200  -  total flux cleaned = -0.00102302 Jy
! Component: 250  -  total flux cleaned = -0.00115193 Jy
! Component: 300  -  total flux cleaned = -0.00130348 Jy
! Component: 350  -  total flux cleaned = -0.00147626 Jy
! Component: 400  -  total flux cleaned = -0.00162143 Jy
! Component: 450  -  total flux cleaned = -0.00171636 Jy
! Component: 500  -  total flux cleaned = -0.00185606 Jy
! Component: 550  -  total flux cleaned = -0.00194726 Jy
! Component: 600  -  total flux cleaned = -0.00203739 Jy
! Component: 650  -  total flux cleaned = -0.00210394 Jy
! Component: 700  -  total flux cleaned = -0.00223406 Jy
! Component: 750  -  total flux cleaned = -0.00219085 Jy
! Component: 800  -  total flux cleaned = -0.00223281 Jy
! Component: 850  -  total flux cleaned = -0.00223295 Jy
! Component: 900  -  total flux cleaned = -0.00229424 Jy
! Component: 950  -  total flux cleaned = -0.00229432 Jy
! Component: 1000  -  total flux cleaned = -0.00235411 Jy
! Component: 1050  -  total flux cleaned = -0.00245253 Jy
! Component: 1100  -  total flux cleaned = -0.00252989 Jy
! Component: 1150  -  total flux cleaned = -0.00260656 Jy
! Component: 1200  -  total flux cleaned = -0.00264456 Jy
! Component: 1250  -  total flux cleaned = -0.00273758 Jy
! Component: 1300  -  total flux cleaned = -0.0027924 Jy
! Component: 1350  -  total flux cleaned = -0.00284709 Jy
! Component: 1400  -  total flux cleaned = -0.0029009 Jy
! Component: 1450  -  total flux cleaned = -0.00298953 Jy
! Component: 1500  -  total flux cleaned = -0.00304205 Jy
! Component: 1550  -  total flux cleaned = -0.00312885 Jy
! Component: 1600  -  total flux cleaned = -0.00314601 Jy
! Component: 1650  -  total flux cleaned = -0.00316302 Jy
! Component: 1700  -  total flux cleaned = -0.00321369 Jy
! Component: 1750  -  total flux cleaned = -0.00324715 Jy
! Component: 1800  -  total flux cleaned = -0.00326368 Jy
! Component: 1850  -  total flux cleaned = -0.00326377 Jy
! Component: 1900  -  total flux cleaned = -0.00329633 Jy
! Component: 1950  -  total flux cleaned = -0.00331237 Jy
! Component: 2000  -  total flux cleaned = -0.00336013 Jy
! Component: 2050  -  total flux cleaned = -0.00336003 Jy
! Component: 2100  -  total flux cleaned = -0.00332907 Jy
! Component: 2150  -  total flux cleaned = -0.00332908 Jy
! Component: 2200  -  total flux cleaned = -0.0033293 Jy
! Component: 2250  -  total flux cleaned = -0.00335988 Jy
! Component: 2300  -  total flux cleaned = -0.00335983 Jy
! Component: 2350  -  total flux cleaned = -0.00337495 Jy
! Component: 2400  -  total flux cleaned = -0.00337501 Jy
! Component: 2450  -  total flux cleaned = -0.00338962 Jy
! Component: 2500  -  total flux cleaned = -0.0033019 Jy
! Component: 2550  -  total flux cleaned = -0.00336 Jy
! Component: 2600  -  total flux cleaned = -0.00331685 Jy
! Component: 2650  -  total flux cleaned = -0.00330255 Jy
! Component: 2700  -  total flux cleaned = -0.00331693 Jy
! Component: 2750  -  total flux cleaned = -0.00334502 Jy
! Component: 2800  -  total flux cleaned = -0.003275 Jy
! Component: 2850  -  total flux cleaned = -0.00330287 Jy
! Component: 2900  -  total flux cleaned = -0.00327538 Jy
! Component: 2950  -  total flux cleaned = -0.00324798 Jy
! Component: 3000  -  total flux cleaned = -0.00324789 Jy
! Component: 3050  -  total flux cleaned = -0.00319376 Jy
! Component: 3100  -  total flux cleaned = -0.00318035 Jy
! Component: 3150  -  total flux cleaned = -0.00322052 Jy
! Component: 3200  -  total flux cleaned = -0.00316741 Jy
! Component: 3250  -  total flux cleaned = -0.00318067 Jy
! Component: 3300  -  total flux cleaned = -0.00316747 Jy
! Component: 3350  -  total flux cleaned = -0.00311519 Jy
! Component: 3400  -  total flux cleaned = -0.00308928 Jy
! Component: 3450  -  total flux cleaned = -0.00310225 Jy
! Component: 3500  -  total flux cleaned = -0.00308934 Jy
! Component: 3550  -  total flux cleaned = -0.00305101 Jy
! Component: 3600  -  total flux cleaned = -0.00305091 Jy
! Component: 3650  -  total flux cleaned = -0.00300048 Jy
! Component: 3700  -  total flux cleaned = -0.00296286 Jy
! Component: 3750  -  total flux cleaned = -0.00295039 Jy
! Component: 3800  -  total flux cleaned = -0.00293791 Jy
! Component: 3850  -  total flux cleaned = -0.00286371 Jy
! Component: 3900  -  total flux cleaned = -0.00285132 Jy
! Component: 3950  -  total flux cleaned = -0.00281474 Jy
! Component: 4000  -  total flux cleaned = -0.00279034 Jy
! Component: 4050  -  total flux cleaned = -0.00272978 Jy
! Total flux subtracted in 4096 components = -0.00266963 Jy
! Clean residual min=-0.000705 max=0.000851 Jy/beam
! Clean residual mean=0.000003 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.125453 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 367 components and 0.125453 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1819+3845_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.641 x 6.04 at -15.15 degrees (North through East)
! Clean map  min=-0.001316  max=0.12596 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1819+3845_S_map.fits
wmodel /image_prod/ug002_uva//J1819+3845_S_map.mod
! Writing 367 model components to file: /image_prod/ug002_uva//J1819+3845_S_map.mod
wobs   /image_prod/ug002_uva//J1819+3845_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1819+3845_S_uvs.fits
wwins  /image_prod/ug002_uva//J1819+3845_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1819+3845_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.125961 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000213873 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.509381 0.509381 1.01876 2.03753 4.07505 8.1501 16.3002 32.6004 65.2008
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.125 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  588.949 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1819+3845_S_dfm.log closed on Thu Mar  5 03:41:31 2020