! Started logfile: /image_prod/ug002_uva//J1804+0101_S_dfm.log on Thu Mar  5 03:37:37 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1804+0101_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1804+0101_S_uva.fits
! AN table 1: 90 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.901543 visibilities/baseline/integration-bin.
! Found source: J1804+0101
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 8763 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1804+0101_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.109027Jy  sigma=7.706422
! Fit after  self-cal, rms=0.716921Jy  sigma=5.233797
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.304 mas, bmaj=13.43 mas, bpa=-17.61 degrees
! Estimated noise=1.37146 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.250499 Jy
! Component: 100  -  total flux cleaned = 0.391923 Jy
! Total flux subtracted in 100 components = 0.391923 Jy
! Clean residual min=-0.035079 max=0.077739 Jy/beam
! Clean residual mean=0.000196 rms=0.011703 Jy/beam
! Combined flux in latest and established models = 0.391923 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 52 components and 0.391923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.276145Jy  sigma=1.792172
! Fit after  self-cal, rms=0.275614Jy  sigma=1.788675
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101519 Jy
! Component: 100  -  total flux cleaned = 0.17879 Jy
! Total flux subtracted in 100 components = 0.17879 Jy
! Clean residual min=-0.021870 max=0.046825 Jy/beam
! Clean residual mean=0.000115 rms=0.007713 Jy/beam
! Combined flux in latest and established models = 0.570713 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 100 components and 0.570712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.194122Jy  sigma=1.252475
! Fit after  self-cal, rms=0.193871Jy  sigma=1.250638
! Inverting map 
! Added new window around map position (-5.5, 2.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0614789 Jy
! Component: 100  -  total flux cleaned = 0.11021 Jy
! Total flux subtracted in 100 components = 0.11021 Jy
! Clean residual min=-0.016233 max=0.030415 Jy/beam
! Clean residual mean=0.000072 rms=0.005560 Jy/beam
! Combined flux in latest and established models = 0.680923 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 153 components and 0.680923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.149758Jy  sigma=0.962503
! Fit after  self-cal, rms=0.149629Jy  sigma=0.961527
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.932 mas, bmaj=13.64 mas, bpa=-16.88 degrees
! Estimated noise=1.09298 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0666167 Jy
! Component: 100  -  total flux cleaned = 0.116474 Jy
! Component: 150  -  total flux cleaned = 0.155505 Jy
! Component: 200  -  total flux cleaned = 0.186748 Jy
! Total flux subtracted in 200 components = 0.186748 Jy
! Clean residual min=-0.014252 max=0.026957 Jy/beam
! Clean residual mean=0.000026 rms=0.004773 Jy/beam
! Combined flux in latest and established models = 0.867671 Jy
! Performing phase self-cal
! Adding 124 model components to the UV plane model.
! The established model now contains 258 components and 0.867671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092895Jy  sigma=0.596129
! Fit after  self-cal, rms=0.092597Jy  sigma=0.594273
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.932 x 13.64 at -16.88 degrees (North through East)
! Clean map  min=-0.013595  max=0.30956 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.22     FD        1.04     HN        1.09     KP        0.92     
!   LA        0.94     MK        1.16     NL        1.05     OV        1.08     
!   PT        0.91     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.97     HN        1.06     KP        0.92     
!   LA        0.95     MK        0.99     NL        1.02     OV        1.04     
!   PT        0.91     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.00     HN        1.02     KP        0.91     
!   LA        0.94     MK        1.03     NL        0.99     OV        1.06     
!   PT        0.91     
! 
! 
! Fit before self-cal, rms=0.092597Jy  sigma=0.594273
! Fit after  self-cal, rms=0.081780Jy  sigma=0.488693
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.014 mas, bmaj=14.1 mas, bpa=-16.99 degrees
! Estimated noise=1.09599 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00839579 Jy
! Component: 100  -  total flux cleaned = 0.0115737 Jy
! Component: 150  -  total flux cleaned = 0.0132583 Jy
! Component: 200  -  total flux cleaned = 0.013967 Jy
! Total flux subtracted in 200 components = 0.013967 Jy
! Clean residual min=-0.008823 max=0.010812 Jy/beam
! Clean residual mean=0.000023 rms=0.002324 Jy/beam
! Combined flux in latest and established models = 0.881638 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 276 components and 0.881638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080613Jy  sigma=0.480625
! Fit after  self-cal, rms=0.080581Jy  sigma=0.479964
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080581Jy  sigma=0.479964
! Fit after  self-cal, rms=0.072977Jy  sigma=0.465647
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.097 mas, bmaj=13.88 mas, bpa=-16.84 degrees
! Estimated noise=1.09784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00422878 Jy
! Component: 100  -  total flux cleaned = 0.00534895 Jy
! Component: 150  -  total flux cleaned = 0.00628869 Jy
! Component: 200  -  total flux cleaned = 0.0072448 Jy
! Total flux subtracted in 200 components = 0.0072448 Jy
! Clean residual min=-0.006744 max=0.008891 Jy/beam
! Clean residual mean=0.000000 rms=0.001993 Jy/beam
! Combined flux in latest and established models = 0.888883 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 284 components and 0.888882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072275Jy  sigma=0.461260
! Fit after  self-cal, rms=0.072226Jy  sigma=0.461006
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8, -6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00286053 Jy
! Component: 100  -  total flux cleaned = 0.00136626 Jy
! Component: 150  -  total flux cleaned = 0.000764954 Jy
! Component: 200  -  total flux cleaned = 0.000947817 Jy
! Total flux subtracted in 200 components = 0.000947817 Jy
! Clean residual min=-0.005793 max=0.008137 Jy/beam
! Clean residual mean=-0.000003 rms=0.001709 Jy/beam
! Combined flux in latest and established models = 0.88983 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 319 components and 0.88983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070607Jy  sigma=0.449866
! Fit after  self-cal, rms=0.070457Jy  sigma=0.449034
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.070457Jy  sigma=0.449034
! Fit after  self-cal, rms=0.067840Jy  sigma=0.447126
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.091 mas, bmaj=13.69 mas, bpa=-16.88 degrees
! Estimated noise=1.08243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00548872 Jy
! Component: 100  -  total flux cleaned = 0.00757412 Jy
! Component: 150  -  total flux cleaned = 0.00831883 Jy
! Component: 200  -  total flux cleaned = 0.00858894 Jy
! Total flux subtracted in 200 components = 0.00858894 Jy
! Clean residual min=-0.005001 max=0.007150 Jy/beam
! Clean residual mean=-0.000006 rms=0.001463 Jy/beam
! Combined flux in latest and established models = 0.898419 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 345 components and 0.898419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067007Jy  sigma=0.442002
! Fit after  self-cal, rms=0.066964Jy  sigma=0.441824
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.5, 20).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00499769 Jy
! Component: 100  -  total flux cleaned = 0.00743715 Jy
! Component: 150  -  total flux cleaned = 0.00812692 Jy
! Component: 200  -  total flux cleaned = 0.00873521 Jy
! Total flux subtracted in 200 components = 0.00873521 Jy
! Clean residual min=-0.004503 max=0.005741 Jy/beam
! Clean residual mean=-0.000002 rms=0.001302 Jy/beam
! Combined flux in latest and established models = 0.907154 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 373 components and 0.907154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066049Jy  sigma=0.436843
! Fit after  self-cal, rms=0.066024Jy  sigma=0.436685
! Inverting map 
! Added new window around map position (-41, 25.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00548632 Jy
! Component: 100  -  total flux cleaned = 0.00816527 Jy
! Component: 150  -  total flux cleaned = 0.00933434 Jy
! Component: 200  -  total flux cleaned = 0.00986001 Jy
! Total flux subtracted in 200 components = 0.00986001 Jy
! Clean residual min=-0.004064 max=0.004434 Jy/beam
! Clean residual mean=0.000005 rms=0.001136 Jy/beam
! Combined flux in latest and established models = 0.917014 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 398 components and 0.917014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065335Jy  sigma=0.432761
! Fit after  self-cal, rms=0.065306Jy  sigma=0.432582
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065306Jy  sigma=0.432582
! Fit after  self-cal, rms=0.063906Jy  sigma=0.430689
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.764 mas, bmaj=13.93 mas, bpa=-12.2 degrees
! Estimated noise=1.24637 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00407896 Jy
! Component: 100  -  total flux cleaned = 0.00705651 Jy
! Component: 150  -  total flux cleaned = 0.00895278 Jy
! Component: 200  -  total flux cleaned = 0.00974845 Jy
! Total flux subtracted in 200 components = 0.00974845 Jy
! Clean residual min=-0.003968 max=0.004324 Jy/beam
! Clean residual mean=0.000004 rms=0.001194 Jy/beam
! Combined flux in latest and established models = 0.926763 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 426 components and 0.926763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063561Jy  sigma=0.428855
! Fit after  self-cal, rms=0.063529Jy  sigma=0.428748
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00025373 Jy
! Component: 100  -  total flux cleaned = 0.000793772 Jy
! Component: 150  -  total flux cleaned = 0.00128962 Jy
! Component: 200  -  total flux cleaned = 0.00174858 Jy
! Total flux subtracted in 200 components = 0.00174858 Jy
! Clean residual min=-0.003707 max=0.004201 Jy/beam
! Clean residual mean=0.000005 rms=0.001143 Jy/beam
! Combined flux in latest and established models = 0.928511 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 447 components and 0.928511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063389Jy  sigma=0.428046
! Fit after  self-cal, rms=0.063381Jy  sigma=0.427993
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.076 mas, bmaj=13.61 mas, bpa=-16.84 degrees
! Estimated noise=1.07284 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.076 x 13.61 at -16.84 degrees (North through East)
! Clean map  min=-0.0065184  max=0.29918 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.421 mas, bmaj=13.38 mas, bpa=-17.58 degrees
! Estimated noise=1.37234 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.247569 Jy
! Component: 100  -  total flux cleaned = 0.386304 Jy
! Component: 150  -  total flux cleaned = 0.484955 Jy
! Component: 200  -  total flux cleaned = 0.55899 Jy
! Total flux subtracted in 200 components = 0.55899 Jy
! Clean residual min=-0.021339 max=0.042857 Jy/beam
! Clean residual mean=0.000106 rms=0.007170 Jy/beam
! Combined flux in latest and established models = 0.558989 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 90 model components to the UV plane model.
! The established model now contains 90 components and 0.558989 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.076 mas, bmaj=13.61 mas, bpa=-16.84 degrees
! Estimated noise=1.07284 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0864801 Jy
! Component: 100  -  total flux cleaned = 0.146909 Jy
! Component: 150  -  total flux cleaned = 0.191492 Jy
! Component: 200  -  total flux cleaned = 0.225773 Jy
! Total flux subtracted in 200 components = 0.225773 Jy
! Clean residual min=-0.014274 max=0.020872 Jy/beam
! Clean residual mean=0.000030 rms=0.004439 Jy/beam
! Combined flux in latest and established models = 0.784763 Jy
! Adding 131 model components to the UV plane model.
! The established model now contains 207 components and 0.784762 Jy
! Inverting map 
! Added new window around map position (-1.5, -15).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.027283 Jy
! Component: 100  -  total flux cleaned = 0.0491292 Jy
! Component: 150  -  total flux cleaned = 0.0667725 Jy
! Component: 200  -  total flux cleaned = 0.0811869 Jy
! Total flux subtracted in 200 components = 0.0811869 Jy
! Clean residual min=-0.008593 max=0.008694 Jy/beam
! Clean residual mean=0.000010 rms=0.002238 Jy/beam
! Combined flux in latest and established models = 0.865949 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 273 components and 0.865949 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.764 mas, bmaj=13.93 mas, bpa=-12.2 degrees
! Estimated noise=1.24637 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169504 Jy
! Component: 100  -  total flux cleaned = 0.0291139 Jy
! Component: 150  -  total flux cleaned = 0.0362301 Jy
! Component: 200  -  total flux cleaned = 0.0412772 Jy
! Total flux subtracted in 200 components = 0.0412772 Jy
! Clean residual min=-0.006758 max=0.005203 Jy/beam
! Clean residual mean=0.000006 rms=0.001776 Jy/beam
! Combined flux in latest and established models = 0.907226 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00398803 Jy
! Component: 100  -  total flux cleaned = 0.00614052 Jy
! Component: 150  -  total flux cleaned = 0.00729039 Jy
! Component: 200  -  total flux cleaned = 0.00898311 Jy
! Total flux subtracted in 200 components = 0.00898311 Jy
! Clean residual min=-0.005455 max=0.004471 Jy/beam
! Clean residual mean=0.000006 rms=0.001439 Jy/beam
! Combined flux in latest and established models = 0.916209 Jy
! Adding 138 model components to the UV plane model.
! The established model now contains 388 components and 0.91621 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.076 mas, bmaj=13.61 mas, bpa=-16.84 degrees
! Estimated noise=1.07284 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000853908 Jy
! Component: 100  -  total flux cleaned = 0.00277958 Jy
! Component: 150  -  total flux cleaned = 0.0041337 Jy
! Component: 200  -  total flux cleaned = 0.00536598 Jy
! Total flux subtracted in 200 components = 0.00536598 Jy
! Clean residual min=-0.003906 max=0.004037 Jy/beam
! Clean residual mean=0.000003 rms=0.001042 Jy/beam
! Combined flux in latest and established models = 0.921576 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 420 components and 0.921576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063862Jy  sigma=0.430678
! Fit after  self-cal, rms=0.063712Jy  sigma=0.429346
wmodel J1804+0101_S_map.mod
! Writing 420 model components to file: J1804+0101_S_map.mod
wobs   J1804+0101_S_uvs.fits
! Writing UV FITS file: J1804+0101_S_uvs.fits
wwins  J1804+0101_S_map.win
! wwins: Wrote 6 windows to J1804+0101_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 4.23434e-06 Jy
! Component: 100  -  total flux cleaned = -0.000583204 Jy
! Component: 150  -  total flux cleaned = -0.000889196 Jy
! Component: 200  -  total flux cleaned = -0.000716701 Jy
! Component: 250  -  total flux cleaned = -0.000661166 Jy
! Component: 300  -  total flux cleaned = -0.000555327 Jy
! Component: 350  -  total flux cleaned = -0.000554463 Jy
! Component: 400  -  total flux cleaned = -0.000504085 Jy
! Component: 450  -  total flux cleaned = -0.000456709 Jy
! Component: 500  -  total flux cleaned = -0.000365453 Jy
! Component: 550  -  total flux cleaned = -0.000409912 Jy
! Component: 600  -  total flux cleaned = -0.000452969 Jy
! Component: 650  -  total flux cleaned = -0.000580194 Jy
! Component: 700  -  total flux cleaned = -0.000662756 Jy
! Component: 750  -  total flux cleaned = -0.000743975 Jy
! Component: 800  -  total flux cleaned = -0.000901577 Jy
! Component: 850  -  total flux cleaned = -0.00101822 Jy
! Component: 900  -  total flux cleaned = -0.00124692 Jy
! Component: 950  -  total flux cleaned = -0.00147142 Jy
! Component: 1000  -  total flux cleaned = -0.00161874 Jy
! Component: 1050  -  total flux cleaned = -0.00187116 Jy
! Component: 1100  -  total flux cleaned = -0.00201202 Jy
! Component: 1150  -  total flux cleaned = -0.00218597 Jy
! Component: 1200  -  total flux cleaned = -0.00232258 Jy
! Component: 1250  -  total flux cleaned = -0.00242431 Jy
! Component: 1300  -  total flux cleaned = -0.0025566 Jy
! Component: 1350  -  total flux cleaned = -0.00271942 Jy
! Component: 1400  -  total flux cleaned = -0.00278361 Jy
! Component: 1450  -  total flux cleaned = -0.00291064 Jy
! Component: 1500  -  total flux cleaned = -0.00303556 Jy
! Component: 1550  -  total flux cleaned = -0.00321926 Jy
! Component: 1600  -  total flux cleaned = -0.00330948 Jy
! Component: 1650  -  total flux cleaned = -0.00345726 Jy
! Component: 1700  -  total flux cleaned = -0.00351577 Jy
! Component: 1750  -  total flux cleaned = -0.00366025 Jy
! Component: 1800  -  total flux cleaned = -0.00368922 Jy
! Component: 1850  -  total flux cleaned = -0.00377392 Jy
! Component: 1900  -  total flux cleaned = -0.00396854 Jy
! Component: 1950  -  total flux cleaned = -0.00396804 Jy
! Component: 2000  -  total flux cleaned = -0.00404949 Jy
! Component: 2050  -  total flux cleaned = -0.00410322 Jy
! Component: 2100  -  total flux cleaned = -0.00420835 Jy
! Component: 2150  -  total flux cleaned = -0.00425991 Jy
! Component: 2200  -  total flux cleaned = -0.00431115 Jy
! Component: 2250  -  total flux cleaned = -0.00438675 Jy
! Component: 2300  -  total flux cleaned = -0.00448652 Jy
! Component: 2350  -  total flux cleaned = -0.004462 Jy
! Component: 2400  -  total flux cleaned = -0.00460911 Jy
! Component: 2450  -  total flux cleaned = -0.00463313 Jy
! Component: 2500  -  total flux cleaned = -0.00468118 Jy
! Component: 2550  -  total flux cleaned = -0.00479929 Jy
! Component: 2600  -  total flux cleaned = -0.00484654 Jy
! Component: 2650  -  total flux cleaned = -0.00496255 Jy
! Component: 2700  -  total flux cleaned = -0.00505404 Jy
! Component: 2750  -  total flux cleaned = -0.00514427 Jy
! Component: 2800  -  total flux cleaned = -0.00516659 Jy
! Component: 2850  -  total flux cleaned = -0.00529971 Jy
! Component: 2900  -  total flux cleaned = -0.0053217 Jy
! Component: 2950  -  total flux cleaned = -0.00538699 Jy
! Component: 3000  -  total flux cleaned = -0.00542995 Jy
! Component: 3050  -  total flux cleaned = -0.00553632 Jy
! Component: 3100  -  total flux cleaned = -0.00562058 Jy
! Component: 3150  -  total flux cleaned = -0.00566221 Jy
! Component: 3200  -  total flux cleaned = -0.00570382 Jy
! Component: 3250  -  total flux cleaned = -0.00580572 Jy
! Component: 3300  -  total flux cleaned = -0.00578531 Jy
! Component: 3350  -  total flux cleaned = -0.00586546 Jy
! Component: 3400  -  total flux cleaned = -0.00586555 Jy
! Component: 3450  -  total flux cleaned = -0.00594416 Jy
! Component: 3500  -  total flux cleaned = -0.00594422 Jy
! Component: 3550  -  total flux cleaned = -0.00602149 Jy
! Component: 3600  -  total flux cleaned = -0.00602146 Jy
! Component: 3650  -  total flux cleaned = -0.00605971 Jy
! Component: 3700  -  total flux cleaned = -0.00611607 Jy
! Component: 3750  -  total flux cleaned = -0.00613469 Jy
! Component: 3800  -  total flux cleaned = -0.00622682 Jy
! Component: 3850  -  total flux cleaned = -0.00624493 Jy
! Component: 3900  -  total flux cleaned = -0.00635348 Jy
! Component: 3950  -  total flux cleaned = -0.00635384 Jy
! Component: 4000  -  total flux cleaned = -0.00644272 Jy
! Component: 4050  -  total flux cleaned = -0.00651314 Jy
! Total flux subtracted in 4096 components = -0.006583 Jy
! Clean residual min=-0.000955 max=0.001013 Jy/beam
! Clean residual mean=-0.000003 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.914993 Jy
keep
! Adding 368 model components to the UV plane model.
! The established model now contains 788 components and 0.914993 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1804+0101_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.076 x 13.61 at -16.84 degrees (North through East)
! Clean map  min=-0.0048436  max=0.29925 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1804+0101_S_map.fits
wmodel /image_prod/ug002_uva//J1804+0101_S_map.mod
! Writing 788 model components to file: /image_prod/ug002_uva//J1804+0101_S_map.mod
wobs   /image_prod/ug002_uva//J1804+0101_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1804+0101_S_uvs.fits
wwins  /image_prod/ug002_uva//J1804+0101_S_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J1804+0101_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.299247 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000373755 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.374696 0.374696 0.749391 1.49878 2.99756 5.99513 11.9903 23.9805 47.961 95.9221
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.299 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  800.65 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1804+0101_S_dfm.log closed on Thu Mar  5 03:37:42 2020