! Started logfile: /image_prod/ug002_uva//J1800+7828_X_k_dfm.log on Thu Mar 5 03:36:35 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1800+7828_X_k_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1800+7828_X_k_uva.fits ! AN table 1: 14 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.84127 visibilities/baseline/integration-bin. ! Found source: J1800+7828 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 5088 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1800+7828_X_k] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.212769Jy sigma=7.919950 ! Fit after self-cal, rms=0.972125Jy sigma=3.387180 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5663 mas, bmaj=2.273 mas, bpa=-47.87 degrees ! Estimated noise=4.28384 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.41226 Jy ! Component: 100 - total flux cleaned = 1.7483 Jy ! Total flux subtracted in 100 components = 1.7483 Jy ! Clean residual min=-0.070454 max=0.136360 Jy/beam ! Clean residual mean=-0.000098 rms=0.015867 Jy/beam ! Combined flux in latest and established models = 1.7483 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.7483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.358329Jy sigma=1.208839 ! Fit after self-cal, rms=0.357988Jy sigma=1.207780 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.16526 Jy ! Component: 100 - total flux cleaned = 0.267847 Jy ! Total flux subtracted in 100 components = 0.267847 Jy ! Clean residual min=-0.054529 max=0.064025 Jy/beam ! Clean residual mean=-0.000029 rms=0.010319 Jy/beam ! Combined flux in latest and established models = 2.01614 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 2.01614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.219731Jy sigma=0.747685 ! Fit after self-cal, rms=0.213809Jy sigma=0.725750 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0737819 Jy ! Component: 100 - total flux cleaned = 0.0823625 Jy ! Total flux subtracted in 100 components = 0.0823625 Jy ! Clean residual min=-0.045341 max=0.045592 Jy/beam ! Clean residual mean=-0.000007 rms=0.008225 Jy/beam ! Combined flux in latest and established models = 2.09851 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 2.09851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.171368Jy sigma=0.588178 ! Fit after self-cal, rms=0.169421Jy sigma=0.581059 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7174 mas, bmaj=2.43 mas, bpa=-49.21 degrees ! Estimated noise=2.90481 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.054109 Jy ! Component: 100 - total flux cleaned = 0.0647823 Jy ! Component: 150 - total flux cleaned = 0.0657746 Jy ! Component: 200 - total flux cleaned = 0.0665843 Jy ! Total flux subtracted in 200 components = 0.0665843 Jy ! Clean residual min=-0.038217 max=0.036430 Jy/beam ! Clean residual mean=0.000008 rms=0.007751 Jy/beam ! Combined flux in latest and established models = 2.16509 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 31 components and 2.16509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.143691Jy sigma=0.502688 ! Fit after self-cal, rms=0.142099Jy sigma=0.497004 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7174 x 2.43 at -49.21 degrees (North through East) ! Clean map min=-0.038681 max=1.8817 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 0.95 KP 1.04 ! LA 1.04 MK 1.01 OV 0.94 PT 0.95 ! SC 1.04 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 0.93 KP 1.02 ! LA 1.03 MK 1.02 OV 0.94 PT 0.96 ! SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 0.92 KP 1.03 ! LA 1.03 MK 1.02 OV 0.95 PT 0.96 ! SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 0.94 KP 1.02 ! LA 1.03 MK 1.02 OV 0.94 PT 0.94 ! SC 1.02 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.94 KP 1.03 ! LA 1.05 MK 1.01 OV 0.95 PT 0.98 ! SC 1.04 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.94 KP 1.03 ! LA 1.04 MK 1.01 OV 0.93 PT 0.96 ! SC 1.02 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.93 KP 1.04 ! LA 1.04 MK 1.02 OV 0.94 PT 0.96 ! SC 1.02 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.93 KP 1.03 ! LA 1.04 MK 1.01 OV 0.95 PT 0.96 ! SC 1.03 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 0.92 KP 1.02 ! LA 1.04 MK 1.00 OV 0.95 PT 0.94 ! SC 1.04 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 0.95 KP 1.02 ! LA 1.02 MK 1.00 OV 0.95 PT 0.96 ! SC 1.03 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.93 KP 1.01 ! LA 1.05 MK 1.00 OV 0.94 PT 0.96 ! SC 1.03 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.94 KP 1.03 ! LA 1.03 MK 1.00 OV 0.95 PT 0.98 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.142099Jy sigma=0.497004 ! Fit after self-cal, rms=0.093855Jy sigma=0.319676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7197 mas, bmaj=2.441 mas, bpa=-49.64 degrees ! Estimated noise=2.89935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0301542 Jy ! Component: 100 - total flux cleaned = 0.0459286 Jy ! Component: 150 - total flux cleaned = 0.0566697 Jy ! Component: 200 - total flux cleaned = 0.061677 Jy ! Total flux subtracted in 200 components = 0.061677 Jy ! Clean residual min=-0.015086 max=0.016498 Jy/beam ! Clean residual mean=-0.000026 rms=0.003430 Jy/beam ! Combined flux in latest and established models = 2.22677 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 50 components and 2.22677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081996Jy sigma=0.281379 ! Fit after self-cal, rms=0.081171Jy sigma=0.278179 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081171Jy sigma=0.278179 ! Fit after self-cal, rms=0.068447Jy sigma=0.237368 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7194 mas, bmaj=2.443 mas, bpa=-49.64 degrees ! Estimated noise=2.90192 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00724773 Jy ! Component: 100 - total flux cleaned = 0.0117433 Jy ! Component: 150 - total flux cleaned = 0.0154047 Jy ! Component: 200 - total flux cleaned = 0.0180599 Jy ! Total flux subtracted in 200 components = 0.0180599 Jy ! Clean residual min=-0.007226 max=0.010669 Jy/beam ! Clean residual mean=-0.000012 rms=0.001786 Jy/beam ! Combined flux in latest and established models = 2.24483 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 71 components and 2.24483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066227Jy sigma=0.230689 ! Fit after self-cal, rms=0.066060Jy sigma=0.230030 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.4, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00977343 Jy ! Component: 100 - total flux cleaned = 0.0127966 Jy ! Component: 150 - total flux cleaned = 0.0147294 Jy ! Component: 200 - total flux cleaned = 0.0154934 Jy ! Total flux subtracted in 200 components = 0.0154934 Jy ! Clean residual min=-0.006416 max=0.007678 Jy/beam ! Clean residual mean=-0.000010 rms=0.001554 Jy/beam ! Combined flux in latest and established models = 2.26032 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 89 components and 2.26032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064363Jy sigma=0.223800 ! Fit after self-cal, rms=0.064311Jy sigma=0.223549 ! Inverting map ! Added new window around map position (-12.4, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00587919 Jy ! Component: 100 - total flux cleaned = 0.00736328 Jy ! Component: 150 - total flux cleaned = 0.00841276 Jy ! Component: 200 - total flux cleaned = 0.00972866 Jy ! Total flux subtracted in 200 components = 0.00972866 Jy ! Clean residual min=-0.005828 max=0.006413 Jy/beam ! Clean residual mean=-0.000010 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 2.27005 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 116 components and 2.27005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063195Jy sigma=0.219883 ! Fit after self-cal, rms=0.063137Jy sigma=0.219683 ! Inverting map ! Added new window around map position (7.4, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00614286 Jy ! Component: 100 - total flux cleaned = 0.0075411 Jy ! Component: 150 - total flux cleaned = 0.00830706 Jy ! Component: 200 - total flux cleaned = 0.00877031 Jy ! Total flux subtracted in 200 components = 0.00877031 Jy ! Clean residual min=-0.005498 max=0.006156 Jy/beam ! Clean residual mean=-0.000012 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 2.27882 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 138 components and 2.27882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062330Jy sigma=0.217003 ! Fit after self-cal, rms=0.062308Jy sigma=0.216918 ! Inverting map ! Added new window around map position (-2.8, -10.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418082 Jy ! Component: 100 - total flux cleaned = 0.00614137 Jy ! Component: 150 - total flux cleaned = 0.00773605 Jy ! Component: 200 - total flux cleaned = 0.00817304 Jy ! Total flux subtracted in 200 components = 0.00817304 Jy ! Clean residual min=-0.004387 max=0.004815 Jy/beam ! Clean residual mean=-0.000013 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 2.28699 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 163 components and 2.287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061528Jy sigma=0.214223 ! Fit after self-cal, rms=0.061474Jy sigma=0.214087 ! Inverting map ! Added new window around map position (14.4, -12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214714 Jy ! Component: 100 - total flux cleaned = 0.00237958 Jy ! Component: 150 - total flux cleaned = 0.00280696 Jy ! Component: 200 - total flux cleaned = 0.00330697 Jy ! Total flux subtracted in 200 components = 0.00330697 Jy ! Clean residual min=-0.004035 max=0.003832 Jy/beam ! Clean residual mean=-0.000014 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 2.2903 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 193 components and 2.2903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060988Jy sigma=0.212530 ! Fit after self-cal, rms=0.060982Jy sigma=0.212493 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060982Jy sigma=0.212493 ! Fit after self-cal, rms=0.060414Jy sigma=0.211210 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7195 mas, bmaj=2.443 mas, bpa=-49.66 degrees ! Estimated noise=2.90139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000923415 Jy ! Component: 100 - total flux cleaned = 0.00217993 Jy ! Component: 150 - total flux cleaned = 0.00278989 Jy ! Component: 200 - total flux cleaned = 0.00336064 Jy ! Total flux subtracted in 200 components = 0.00336064 Jy ! Clean residual min=-0.003449 max=0.003548 Jy/beam ! Clean residual mean=-0.000012 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 2.29366 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 212 components and 2.29366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060141Jy sigma=0.210295 ! Fit after self-cal, rms=0.060137Jy sigma=0.210274 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019972 Jy ! Component: 100 - total flux cleaned = 0.000642977 Jy ! Component: 150 - total flux cleaned = 0.00113269 Jy ! Component: 200 - total flux cleaned = 0.00146234 Jy ! Total flux subtracted in 200 components = 0.00146234 Jy ! Clean residual min=-0.003281 max=0.003464 Jy/beam ! Clean residual mean=-0.000012 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 2.29512 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 227 components and 2.29512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059986Jy sigma=0.209773 ! Fit after self-cal, rms=0.059985Jy sigma=0.209765 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059985Jy sigma=0.209765 ! Fit after self-cal, rms=0.059936Jy sigma=0.209678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.109 mas, bmaj=3.561 mas, bpa=-42.42 degrees ! Estimated noise=4.37255 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186159 Jy ! Component: 100 - total flux cleaned = 0.00285774 Jy ! Component: 150 - total flux cleaned = 0.00401146 Jy ! Component: 200 - total flux cleaned = 0.00481851 Jy ! Total flux subtracted in 200 components = 0.00481851 Jy ! Clean residual min=-0.004286 max=0.004910 Jy/beam ! Clean residual mean=-0.000029 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 2.29994 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 253 components and 2.29994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059824Jy sigma=0.209363 ! Fit after self-cal, rms=0.059828Jy sigma=0.209333 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010508 Jy ! Component: 100 - total flux cleaned = 0.00163615 Jy ! Component: 150 - total flux cleaned = 0.00218281 Jy ! Component: 200 - total flux cleaned = 0.00263267 Jy ! Total flux subtracted in 200 components = 0.00263267 Jy ! Clean residual min=-0.003933 max=0.004757 Jy/beam ! Clean residual mean=-0.000027 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 2.30258 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 268 components and 2.30258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059785Jy sigma=0.209235 ! Fit after self-cal, rms=0.059788Jy sigma=0.209217 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7196 mas, bmaj=2.442 mas, bpa=-49.66 degrees ! Estimated noise=2.90141 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7196 x 2.442 at -49.66 degrees (North through East) ! Clean map min=-0.015859 max=1.8719 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059788Jy sigma=0.209217 ! Fit after self-cal, rms=0.055514Jy sigma=0.186577 ! Inverting map and beam ! Estimated beam: bmin=0.7195 mas, bmaj=2.442 mas, bpa=-49.66 degrees ! Estimated noise=2.90174 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011464 Jy ! Component: 100 - total flux cleaned = 0.0014705 Jy ! Component: 150 - total flux cleaned = 0.00170228 Jy ! Component: 200 - total flux cleaned = 0.00181043 Jy ! Total flux subtracted in 200 components = 0.00181043 Jy ! Clean residual min=-0.002594 max=0.002933 Jy/beam ! Clean residual mean=-0.000009 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 2.30439 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 286 components and 2.30439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055382Jy sigma=0.186151 ! Fit after self-cal, rms=0.055383Jy sigma=0.186145 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208036 Jy ! Component: 100 - total flux cleaned = 0.000255448 Jy ! Component: 150 - total flux cleaned = 0.000348193 Jy ! Component: 200 - total flux cleaned = 0.000347862 Jy ! Total flux subtracted in 200 components = 0.000347862 Jy ! Clean residual min=-0.002573 max=0.002841 Jy/beam ! Clean residual mean=-0.000009 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 2.30473 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 302 components and 2.30473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055308Jy sigma=0.185901 ! Fit after self-cal, rms=0.055308Jy sigma=0.185897 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055308Jy sigma=0.185897 ! Fit after self-cal, rms=0.055297Jy sigma=0.185858 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5691 mas, bmaj=2.273 mas, bpa=-48.04 degrees ! Estimated noise=4.28643 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.40538 Jy ! Component: 100 - total flux cleaned = 1.74475 Jy ! Component: 150 - total flux cleaned = 1.91393 Jy ! Component: 200 - total flux cleaned = 2.01756 Jy ! Total flux subtracted in 200 components = 2.01756 Jy ! Clean residual min=-0.028637 max=0.053791 Jy/beam ! Clean residual mean=-0.000053 rms=0.006440 Jy/beam ! Combined flux in latest and established models = 2.01756 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 2.01756 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7196 mas, bmaj=2.442 mas, bpa=-49.67 degrees ! Estimated noise=2.90211 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0974852 Jy ! Component: 100 - total flux cleaned = 0.150651 Jy ! Component: 150 - total flux cleaned = 0.179966 Jy ! Component: 200 - total flux cleaned = 0.193238 Jy ! Total flux subtracted in 200 components = 0.193238 Jy ! Clean residual min=-0.014174 max=0.013168 Jy/beam ! Clean residual mean=-0.000030 rms=0.002692 Jy/beam ! Combined flux in latest and established models = 2.2108 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 35 components and 2.2108 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.109 mas, bmaj=3.561 mas, bpa=-42.43 degrees ! Estimated noise=4.37365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0256299 Jy ! Component: 100 - total flux cleaned = 0.0416731 Jy ! Component: 150 - total flux cleaned = 0.0541556 Jy ! Component: 200 - total flux cleaned = 0.0632159 Jy ! Total flux subtracted in 200 components = 0.0632159 Jy ! Clean residual min=-0.009166 max=0.008708 Jy/beam ! Clean residual mean=-0.000029 rms=0.002605 Jy/beam ! Combined flux in latest and established models = 2.27402 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00724711 Jy ! Component: 100 - total flux cleaned = 0.0125816 Jy ! Component: 150 - total flux cleaned = 0.0166853 Jy ! Component: 200 - total flux cleaned = 0.0202709 Jy ! Total flux subtracted in 200 components = 0.0202709 Jy ! Clean residual min=-0.006190 max=0.006780 Jy/beam ! Clean residual mean=-0.000025 rms=0.001881 Jy/beam ! Combined flux in latest and established models = 2.29429 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 102 components and 2.29429 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7196 mas, bmaj=2.442 mas, bpa=-49.67 degrees ! Estimated noise=2.90211 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00569895 Jy ! Component: 100 - total flux cleaned = 0.010492 Jy ! Component: 150 - total flux cleaned = 0.0120759 Jy ! Component: 200 - total flux cleaned = 0.0126003 Jy ! Total flux subtracted in 200 components = 0.0126003 Jy ! Clean residual min=-0.006245 max=0.006486 Jy/beam ! Clean residual mean=-0.000007 rms=0.001298 Jy/beam ! Combined flux in latest and established models = 2.30689 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 129 components and 2.30689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059026Jy sigma=0.201399 ! Fit after self-cal, rms=0.058437Jy sigma=0.198196 wmodel J1800+7828_X_k_map.mod ! Writing 129 model components to file: J1800+7828_X_k_map.mod wobs J1800+7828_X_k_uvs.fits ! Writing UV FITS file: J1800+7828_X_k_uvs.fits wwins J1800+7828_X_k_map.win ! wwins: Wrote 7 windows to J1800+7828_X_k_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00040949 Jy ! Component: 100 - total flux cleaned = 0.00130217 Jy ! Component: 150 - total flux cleaned = 0.00224183 Jy ! Component: 200 - total flux cleaned = 0.00277527 Jy ! Component: 250 - total flux cleaned = 0.00311547 Jy ! Component: 300 - total flux cleaned = 0.00376818 Jy ! Component: 350 - total flux cleaned = 0.00415821 Jy ! Component: 400 - total flux cleaned = 0.00453555 Jy ! Component: 450 - total flux cleaned = 0.00475398 Jy ! Component: 500 - total flux cleaned = 0.00489543 Jy ! Component: 550 - total flux cleaned = 0.00509961 Jy ! Component: 600 - total flux cleaned = 0.00509902 Jy ! Component: 650 - total flux cleaned = 0.00522728 Jy ! Component: 700 - total flux cleaned = 0.00522617 Jy ! Component: 750 - total flux cleaned = 0.00504577 Jy ! Component: 800 - total flux cleaned = 0.00510556 Jy ! Component: 850 - total flux cleaned = 0.00504952 Jy ! Component: 900 - total flux cleaned = 0.00516031 Jy ! Component: 950 - total flux cleaned = 0.00499789 Jy ! Component: 1000 - total flux cleaned = 0.00494557 Jy ! Component: 1050 - total flux cleaned = 0.00504948 Jy ! Component: 1100 - total flux cleaned = 0.00499842 Jy ! Component: 1150 - total flux cleaned = 0.0049984 Jy ! Component: 1200 - total flux cleaned = 0.00509555 Jy ! Component: 1250 - total flux cleaned = 0.00514212 Jy ! Component: 1300 - total flux cleaned = 0.00528071 Jy ! Component: 1350 - total flux cleaned = 0.00537107 Jy ! Component: 1400 - total flux cleaned = 0.00532471 Jy ! Component: 1450 - total flux cleaned = 0.00545592 Jy ! Component: 1500 - total flux cleaned = 0.00554145 Jy ! Component: 1550 - total flux cleaned = 0.00545648 Jy ! Component: 1600 - total flux cleaned = 0.0056247 Jy ! Component: 1650 - total flux cleaned = 0.00566691 Jy ! Component: 1700 - total flux cleaned = 0.00578818 Jy ! Component: 1750 - total flux cleaned = 0.00582761 Jy ! Component: 1800 - total flux cleaned = 0.0059448 Jy ! Component: 1850 - total flux cleaned = 0.0061378 Jy ! Component: 1900 - total flux cleaned = 0.0061754 Jy ! Component: 1950 - total flux cleaned = 0.00632464 Jy ! Component: 2000 - total flux cleaned = 0.00643512 Jy ! Component: 2050 - total flux cleaned = 0.0065437 Jy ! Component: 2100 - total flux cleaned = 0.00657999 Jy ! Component: 2150 - total flux cleaned = 0.00665036 Jy ! Component: 2200 - total flux cleaned = 0.00675441 Jy ! Component: 2250 - total flux cleaned = 0.00692584 Jy ! Component: 2300 - total flux cleaned = 0.00672275 Jy ! Component: 2350 - total flux cleaned = 0.00685668 Jy ! Component: 2400 - total flux cleaned = 0.00685689 Jy ! Component: 2450 - total flux cleaned = 0.0067923 Jy ! Component: 2500 - total flux cleaned = 0.00692067 Jy ! Component: 2550 - total flux cleaned = 0.0069204 Jy ! Component: 2600 - total flux cleaned = 0.00688899 Jy ! Component: 2650 - total flux cleaned = 0.00691957 Jy ! Component: 2700 - total flux cleaned = 0.00676682 Jy ! Component: 2750 - total flux cleaned = 0.00682726 Jy ! Component: 2800 - total flux cleaned = 0.00679705 Jy ! Component: 2850 - total flux cleaned = 0.00682616 Jy ! Component: 2900 - total flux cleaned = 0.00676786 Jy ! Component: 2950 - total flux cleaned = 0.00688337 Jy ! Component: 3000 - total flux cleaned = 0.00682592 Jy ! Component: 3050 - total flux cleaned = 0.00691023 Jy ! Component: 3100 - total flux cleaned = 0.00696579 Jy ! Component: 3150 - total flux cleaned = 0.00696549 Jy ! Component: 3200 - total flux cleaned = 0.00693827 Jy ! Component: 3250 - total flux cleaned = 0.0069922 Jy ! Component: 3300 - total flux cleaned = 0.00699227 Jy ! Component: 3350 - total flux cleaned = 0.00693938 Jy ! Component: 3400 - total flux cleaned = 0.00699246 Jy ! Component: 3450 - total flux cleaned = 0.00701889 Jy ! Component: 3500 - total flux cleaned = 0.00707037 Jy ! Component: 3550 - total flux cleaned = 0.0071213 Jy ! Component: 3600 - total flux cleaned = 0.00707112 Jy ! Component: 3650 - total flux cleaned = 0.00712075 Jy ! Component: 3700 - total flux cleaned = 0.00724484 Jy ! Component: 3750 - total flux cleaned = 0.00719584 Jy ! Component: 3800 - total flux cleaned = 0.00712328 Jy ! Component: 3850 - total flux cleaned = 0.00721946 Jy ! Component: 3900 - total flux cleaned = 0.00724361 Jy ! Component: 3950 - total flux cleaned = 0.0072199 Jy ! Component: 4000 - total flux cleaned = 0.00719622 Jy ! Component: 4050 - total flux cleaned = 0.00724251 Jy ! Total flux subtracted in 4096 components = 0.00724257 Jy ! Clean residual min=-0.001307 max=0.001293 Jy/beam ! Clean residual mean=-0.000002 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 2.31413 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 439 components and 2.31413 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1800+7828_X_k_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7196 x 2.442 at -49.67 degrees (North through East) ! Clean map min=-0.0091294 max=1.8556 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1800+7828_X_k_map.fits wmodel /image_prod/ug002_uva//J1800+7828_X_k_map.mod ! Writing 439 model components to file: /image_prod/ug002_uva//J1800+7828_X_k_map.mod wobs /image_prod/ug002_uva//J1800+7828_X_k_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1800+7828_X_k_uvs.fits wwins /image_prod/ug002_uva//J1800+7828_X_k_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uva//J1800+7828_X_k_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.85558 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000399337 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0645627 0.0645627 0.129125 0.258251 0.516502 1.033 2.06601 4.13201 8.26403 16.5281 33.0561 66.1122 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.855 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4646.64 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1800+7828_X_k_dfm.log closed on Thu Mar 5 03:36:40 2020