! Started logfile: /image_prod/ug002_uva//J1800+7828_X_d_dfm.log on Thu Mar 5 03:35:59 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1800+7828_X_d_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1800+7828_X_d_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.735185 visibilities/baseline/integration-bin. ! Found source: J1800+7828 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 9528 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1800+7828_X_d] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.196645Jy sigma=7.689629 ! Fit after self-cal, rms=1.029889Jy sigma=3.442961 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7323 mas, bmaj=0.817 mas, bpa=-86.6 degrees ! Estimated noise=2.78139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.39847 Jy ! Component: 100 - total flux cleaned = 1.73291 Jy ! Total flux subtracted in 100 components = 1.73291 Jy ! Clean residual min=-0.050150 max=0.159635 Jy/beam ! Clean residual mean=-0.000035 rms=0.011795 Jy/beam ! Combined flux in latest and established models = 1.73291 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.73291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.451035Jy sigma=1.423560 ! Fit after self-cal, rms=0.450619Jy sigma=1.422344 ! Inverting map ! Added new window around map position (-1.2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.16353 Jy ! Component: 100 - total flux cleaned = 0.260854 Jy ! Total flux subtracted in 100 components = 0.260854 Jy ! Clean residual min=-0.046411 max=0.054077 Jy/beam ! Clean residual mean=-0.000024 rms=0.008640 Jy/beam ! Combined flux in latest and established models = 1.99376 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 1.99376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.321637Jy sigma=1.033287 ! Fit after self-cal, rms=0.316659Jy sigma=1.013868 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.078527 Jy ! Component: 100 - total flux cleaned = 0.130071 Jy ! Total flux subtracted in 100 components = 0.130071 Jy ! Clean residual min=-0.043210 max=0.049757 Jy/beam ! Clean residual mean=-0.000018 rms=0.007491 Jy/beam ! Combined flux in latest and established models = 2.12383 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 27 components and 2.12383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.268567Jy sigma=0.881982 ! Fit after self-cal, rms=0.266626Jy sigma=0.874095 ! Inverting map ! Added new window around map position (-3.2, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.050814 Jy ! Component: 100 - total flux cleaned = 0.0864978 Jy ! Total flux subtracted in 100 components = 0.0864978 Jy ! Clean residual min=-0.039082 max=0.038888 Jy/beam ! Clean residual mean=-0.000015 rms=0.006916 Jy/beam ! Combined flux in latest and established models = 2.21033 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 2.21033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.243792Jy sigma=0.815192 ! Fit after self-cal, rms=0.243260Jy sigma=0.812786 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9166 mas, bmaj=1.009 mas, bpa=-85.12 degrees ! Estimated noise=2.07037 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.058591 Jy ! Component: 100 - total flux cleaned = 0.0955161 Jy ! Component: 150 - total flux cleaned = 0.122663 Jy ! Component: 200 - total flux cleaned = 0.143113 Jy ! Total flux subtracted in 200 components = 0.143113 Jy ! Clean residual min=-0.036451 max=0.044011 Jy/beam ! Clean residual mean=0.000014 rms=0.008298 Jy/beam ! Combined flux in latest and established models = 2.35344 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 49 components and 2.35344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.219542Jy sigma=0.762532 ! Fit after self-cal, rms=0.218179Jy sigma=0.756081 ! Inverting map ! Added new window around map position (-2, 4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0426422 Jy ! Component: 100 - total flux cleaned = 0.0623111 Jy ! Component: 150 - total flux cleaned = 0.0702832 Jy ! Component: 200 - total flux cleaned = 0.0777904 Jy ! Total flux subtracted in 200 components = 0.0777904 Jy ! Clean residual min=-0.034075 max=0.038733 Jy/beam ! Clean residual mean=0.000011 rms=0.007749 Jy/beam ! Combined flux in latest and established models = 2.43123 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 2.43123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.207304Jy sigma=0.723767 ! Fit after self-cal, rms=0.206381Jy sigma=0.720379 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9166 x 1.009 at -85.12 degrees (North through East) ! Clean map min=-0.030687 max=1.8099 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.00 KP 1.05 ! LA 1.01 MK 1.01 NL 1.12 OV 1.09 ! PT 0.89 SC 1.08 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.98 KP 1.02 ! LA 1.01 MK 0.98 NL 1.13 OV 1.03 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.98 KP 1.03 ! LA 0.98 MK 1.00 NL 1.11 OV 1.03 ! PT 0.90 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.00 KP 1.01 ! LA 1.02 MK 1.00 NL 1.09 OV 1.04 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.03 HN 0.95 KP 1.03 ! LA 0.97 MK 0.99 NL 1.11 OV 1.05 ! PT 0.90 SC 1.06 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.95 KP 1.01 ! LA 0.97 MK 0.98 NL 1.13 OV 1.06 ! PT 0.89 SC 1.07 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.95 KP 1.01 ! LA 0.97 MK 1.04 NL 1.14 OV 1.02 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.95 KP 1.05 ! LA 1.00 MK 0.98 NL 1.10 OV 1.04 ! PT 0.88 SC 1.03 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00 KP 1.00 ! LA 1.01 MK 0.97 NL 1.09 OV 1.03 ! PT 0.90 SC 1.08 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 0.97 KP 1.03 ! LA 0.98 MK 1.01 NL 1.12 OV 1.05 ! PT 0.90 SC 1.01 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.95 KP 1.01 ! LA 1.00 MK 0.97 NL 1.07 OV 1.01 ! PT 0.93 SC 1.07 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.96 HN 0.98 KP 1.05 ! LA 0.98 MK 1.02 NL 1.13 OV 1.02 ! PT 0.89 SC 1.03 ! ! ! Fit before self-cal, rms=0.206381Jy sigma=0.720379 ! Fit after self-cal, rms=0.131431Jy sigma=0.478651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9194 mas, bmaj=1.01 mas, bpa=-84.38 degrees ! Estimated noise=2.08116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0113871 Jy ! Component: 100 - total flux cleaned = -0.0188006 Jy ! Component: 150 - total flux cleaned = -0.0244078 Jy ! Component: 200 - total flux cleaned = -0.0262806 Jy ! Total flux subtracted in 200 components = -0.0262806 Jy ! Clean residual min=-0.022530 max=0.022530 Jy/beam ! Clean residual mean=-0.000008 rms=0.004743 Jy/beam ! Combined flux in latest and established models = 2.40495 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 2.40495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126291Jy sigma=0.462711 ! Fit after self-cal, rms=0.125780Jy sigma=0.460990 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125780Jy sigma=0.460990 ! Fit after self-cal, rms=0.098173Jy sigma=0.343750 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9187 mas, bmaj=1.008 mas, bpa=-85.89 degrees ! Estimated noise=2.0832 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000508295 Jy ! Component: 100 - total flux cleaned = -0.00384361 Jy ! Component: 150 - total flux cleaned = -0.00688628 Jy ! Component: 200 - total flux cleaned = -0.00889279 Jy ! Total flux subtracted in 200 components = -0.00889279 Jy ! Clean residual min=-0.012969 max=0.013436 Jy/beam ! Clean residual mean=0.000007 rms=0.002841 Jy/beam ! Combined flux in latest and established models = 2.39606 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 87 components and 2.39606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094095Jy sigma=0.328637 ! Fit after self-cal, rms=0.093502Jy sigma=0.326677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.4, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111996 Jy ! Component: 100 - total flux cleaned = 0.0153457 Jy ! Component: 150 - total flux cleaned = 0.0166436 Jy ! Component: 200 - total flux cleaned = 0.0175055 Jy ! Total flux subtracted in 200 components = 0.0175055 Jy ! Clean residual min=-0.012174 max=0.010749 Jy/beam ! Clean residual mean=0.000004 rms=0.002639 Jy/beam ! Combined flux in latest and established models = 2.41356 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 104 components and 2.41356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090747Jy sigma=0.316804 ! Fit after self-cal, rms=0.090595Jy sigma=0.316374 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090595Jy sigma=0.316374 ! Fit after self-cal, rms=0.075378Jy sigma=0.262374 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9181 mas, bmaj=1.007 mas, bpa=-85.79 degrees ! Estimated noise=2.08161 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00331354 Jy ! Component: 100 - total flux cleaned = -0.00302155 Jy ! Component: 150 - total flux cleaned = -0.00192219 Jy ! Component: 200 - total flux cleaned = -0.000982677 Jy ! Total flux subtracted in 200 components = -0.000982677 Jy ! Clean residual min=-0.007574 max=0.007507 Jy/beam ! Clean residual mean=0.000009 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 2.41258 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 118 components and 2.41258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072724Jy sigma=0.253741 ! Fit after self-cal, rms=0.072547Jy sigma=0.253130 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.99589e-06 Jy ! Component: 100 - total flux cleaned = 0.000391915 Jy ! Component: 150 - total flux cleaned = 0.000573653 Jy ! Component: 200 - total flux cleaned = 0.000905514 Jy ! Total flux subtracted in 200 components = 0.000905514 Jy ! Clean residual min=-0.006913 max=0.007322 Jy/beam ! Clean residual mean=0.000009 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 2.41349 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 125 components and 2.41349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071547Jy sigma=0.249977 ! Fit after self-cal, rms=0.071503Jy sigma=0.249836 ! Inverting map ! Added new window around map position (-7.6, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00702311 Jy ! Component: 100 - total flux cleaned = 0.00878286 Jy ! Component: 150 - total flux cleaned = 0.00953903 Jy ! Component: 200 - total flux cleaned = 0.0102261 Jy ! Total flux subtracted in 200 components = 0.0102261 Jy ! Clean residual min=-0.006708 max=0.005913 Jy/beam ! Clean residual mean=0.000008 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 2.42371 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 135 components and 2.42371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070511Jy sigma=0.246787 ! Fit after self-cal, rms=0.070482Jy sigma=0.246656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070482Jy sigma=0.246656 ! Fit after self-cal, rms=0.069770Jy sigma=0.244713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.188 mas, bmaj=2.384 mas, bpa=79.41 degrees ! Estimated noise=3.22284 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463193 Jy ! Component: 100 - total flux cleaned = 0.00748127 Jy ! Component: 150 - total flux cleaned = 0.00999106 Jy ! Component: 200 - total flux cleaned = 0.0118931 Jy ! Total flux subtracted in 200 components = 0.0118931 Jy ! Clean residual min=-0.009091 max=0.008800 Jy/beam ! Clean residual mean=0.000008 rms=0.002281 Jy/beam ! Combined flux in latest and established models = 2.43561 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 149 components and 2.43561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069423Jy sigma=0.244301 ! Fit after self-cal, rms=0.069426Jy sigma=0.244106 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195751 Jy ! Component: 100 - total flux cleaned = 0.00261764 Jy ! Component: 150 - total flux cleaned = 0.00302396 Jy ! Component: 200 - total flux cleaned = 0.00349207 Jy ! Total flux subtracted in 200 components = 0.00349207 Jy ! Clean residual min=-0.008692 max=0.008815 Jy/beam ! Clean residual mean=0.000007 rms=0.002252 Jy/beam ! Combined flux in latest and established models = 2.4391 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 156 components and 2.4391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069270Jy sigma=0.243860 ! Fit after self-cal, rms=0.069273Jy sigma=0.243828 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9178 mas, bmaj=1.006 mas, bpa=-85.69 degrees ! Estimated noise=2.08069 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9178 x 1.006 at -85.69 degrees (North through East) ! Clean map min=-0.012621 max=1.8129 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069273Jy sigma=0.243828 ! Fit after self-cal, rms=0.066568Jy sigma=0.227145 ! Inverting map and beam ! Estimated beam: bmin=0.9176 mas, bmaj=1.006 mas, bpa=-85.81 degrees ! Estimated noise=2.08037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000695837 Jy ! Component: 100 - total flux cleaned = 0.000266294 Jy ! Component: 150 - total flux cleaned = -0.000244856 Jy ! Component: 200 - total flux cleaned = -0.000929153 Jy ! Total flux subtracted in 200 components = -0.000929153 Jy ! Clean residual min=-0.005975 max=0.005558 Jy/beam ! Clean residual mean=0.000003 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 2.43817 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 163 components and 2.43817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066002Jy sigma=0.225120 ! Fit after self-cal, rms=0.065934Jy sigma=0.224981 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.46431e-05 Jy ! Component: 100 - total flux cleaned = -0.000514253 Jy ! Component: 150 - total flux cleaned = -0.00111429 Jy ! Component: 200 - total flux cleaned = -0.00148904 Jy ! Total flux subtracted in 200 components = -0.00148904 Jy ! Clean residual min=-0.005911 max=0.005462 Jy/beam ! Clean residual mean=0.000003 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 2.43668 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 168 components and 2.43668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065640Jy sigma=0.223876 ! Fit after self-cal, rms=0.065606Jy sigma=0.223799 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065606Jy sigma=0.223799 ! Fit after self-cal, rms=0.065448Jy sigma=0.223459 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7327 mas, bmaj=0.818 mas, bpa=-87.65 degrees ! Estimated noise=2.79437 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.39721 Jy ! Component: 100 - total flux cleaned = 1.76656 Jy ! Component: 150 - total flux cleaned = 1.95798 Jy ! Component: 200 - total flux cleaned = 2.07128 Jy ! Total flux subtracted in 200 components = 2.07128 Jy ! Clean residual min=-0.021444 max=0.058823 Jy/beam ! Clean residual mean=-0.000011 rms=0.004637 Jy/beam ! Combined flux in latest and established models = 2.07128 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 2.07128 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9176 mas, bmaj=1.006 mas, bpa=-85.65 degrees ! Estimated noise=2.08022 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110481 Jy ! Component: 100 - total flux cleaned = 0.172944 Jy ! Component: 150 - total flux cleaned = 0.211974 Jy ! Component: 200 - total flux cleaned = 0.239426 Jy ! Total flux subtracted in 200 components = 0.239426 Jy ! Clean residual min=-0.007875 max=0.018168 Jy/beam ! Clean residual mean=0.000010 rms=0.002340 Jy/beam ! Combined flux in latest and established models = 2.3107 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 47 components and 2.3107 Jy ! Inverting map ! Added new window around map position (-2.2, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021115 Jy ! Component: 100 - total flux cleaned = 0.0372924 Jy ! Component: 150 - total flux cleaned = 0.0503831 Jy ! Component: 200 - total flux cleaned = 0.0604338 Jy ! Total flux subtracted in 200 components = 0.0604338 Jy ! Clean residual min=-0.006669 max=0.009950 Jy/beam ! Clean residual mean=0.000006 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 2.37114 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 72 components and 2.37114 Jy ! Inverting map ! Added new window around map position (-8.6, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00933654 Jy ! Component: 100 - total flux cleaned = 0.0162044 Jy ! Component: 150 - total flux cleaned = 0.0220308 Jy ! Component: 200 - total flux cleaned = 0.0273015 Jy ! Total flux subtracted in 200 components = 0.0273015 Jy ! Clean residual min=-0.005166 max=0.006628 Jy/beam ! Clean residual mean=0.000005 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 2.39844 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 97 components and 2.39844 Jy ! Inverting map ! Added new window around map position (1.4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539814 Jy ! Component: 100 - total flux cleaned = 0.0100628 Jy ! Component: 150 - total flux cleaned = 0.013488 Jy ! Component: 200 - total flux cleaned = 0.0166632 Jy ! Total flux subtracted in 200 components = 0.0166632 Jy ! Clean residual min=-0.004976 max=0.005189 Jy/beam ! Clean residual mean=0.000004 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 2.4151 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 115 components and 2.4151 Jy ! Inverting map ! Added new window around map position (-4.4, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00437358 Jy ! Component: 100 - total flux cleaned = 0.00664027 Jy ! Component: 150 - total flux cleaned = 0.00874768 Jy ! Component: 200 - total flux cleaned = 0.0105559 Jy ! Total flux subtracted in 200 components = 0.0105559 Jy ! Clean residual min=-0.004661 max=0.004574 Jy/beam ! Clean residual mean=0.000003 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 2.42566 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 127 components and 2.42566 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.189 mas, bmaj=2.383 mas, bpa=79.37 degrees ! Estimated noise=3.2231 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.006861 Jy ! Component: 100 - total flux cleaned = 0.0118963 Jy ! Component: 150 - total flux cleaned = 0.0158912 Jy ! Component: 200 - total flux cleaned = 0.0191343 Jy ! Total flux subtracted in 200 components = 0.0191343 Jy ! Clean residual min=-0.007038 max=0.007441 Jy/beam ! Clean residual mean=0.000008 rms=0.001966 Jy/beam ! Combined flux in latest and established models = 2.44479 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260962 Jy ! Component: 100 - total flux cleaned = 0.00420383 Jy ! Component: 150 - total flux cleaned = 0.00552589 Jy ! Component: 200 - total flux cleaned = 0.00649057 Jy ! Total flux subtracted in 200 components = 0.00649057 Jy ! Clean residual min=-0.006812 max=0.007374 Jy/beam ! Clean residual mean=0.000006 rms=0.001917 Jy/beam ! Combined flux in latest and established models = 2.45128 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 165 components and 2.45128 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9176 mas, bmaj=1.006 mas, bpa=-85.65 degrees ! Estimated noise=2.08022 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00266859 Jy ! Component: 100 - total flux cleaned = -0.00303752 Jy ! Component: 150 - total flux cleaned = -0.00314684 Jy ! Component: 200 - total flux cleaned = -0.00324712 Jy ! Total flux subtracted in 200 components = -0.00324712 Jy ! Clean residual min=-0.004843 max=0.004492 Jy/beam ! Clean residual mean=0.000002 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 2.44804 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 181 components and 2.44804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063838Jy sigma=0.218541 ! Fit after self-cal, rms=0.063184Jy sigma=0.216106 wmodel J1800+7828_X_d_map.mod ! Writing 181 model components to file: J1800+7828_X_d_map.mod wobs J1800+7828_X_d_uvs.fits ! Writing UV FITS file: J1800+7828_X_d_uvs.fits wwins J1800+7828_X_d_map.win ! wwins: Wrote 10 windows to J1800+7828_X_d_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000347486 Jy ! Component: 100 - total flux cleaned = 3.58894e-05 Jy ! Component: 150 - total flux cleaned = 0.000325273 Jy ! Component: 200 - total flux cleaned = 0.000533579 Jy ! Component: 250 - total flux cleaned = 0.00073283 Jy ! Component: 300 - total flux cleaned = 0.00131116 Jy ! Component: 350 - total flux cleaned = 0.00162359 Jy ! Component: 400 - total flux cleaned = 0.00205123 Jy ! Component: 450 - total flux cleaned = 0.00235045 Jy ! Component: 500 - total flux cleaned = 0.00270277 Jy ! Component: 550 - total flux cleaned = 0.00316203 Jy ! Component: 600 - total flux cleaned = 0.00316149 Jy ! Component: 650 - total flux cleaned = 0.00349532 Jy ! Component: 700 - total flux cleaned = 0.00376898 Jy ! Component: 750 - total flux cleaned = 0.00398514 Jy ! Component: 800 - total flux cleaned = 0.00419825 Jy ! Component: 850 - total flux cleaned = 0.0043029 Jy ! Component: 900 - total flux cleaned = 0.00461449 Jy ! Component: 950 - total flux cleaned = 0.00476858 Jy ! Component: 1000 - total flux cleaned = 0.00512073 Jy ! Component: 1050 - total flux cleaned = 0.00512014 Jy ! Component: 1100 - total flux cleaned = 0.00536655 Jy ! Component: 1150 - total flux cleaned = 0.00570671 Jy ! Component: 1200 - total flux cleaned = 0.00599424 Jy ! Component: 1250 - total flux cleaned = 0.00613559 Jy ! Component: 1300 - total flux cleaned = 0.0062288 Jy ! Component: 1350 - total flux cleaned = 0.00650604 Jy ! Component: 1400 - total flux cleaned = 0.00655097 Jy ! Component: 1450 - total flux cleaned = 0.00682286 Jy ! Component: 1500 - total flux cleaned = 0.00691247 Jy ! Component: 1550 - total flux cleaned = 0.00722292 Jy ! Component: 1600 - total flux cleaned = 0.00730979 Jy ! Component: 1650 - total flux cleaned = 0.0073964 Jy ! Component: 1700 - total flux cleaned = 0.00756841 Jy ! Component: 1750 - total flux cleaned = 0.00756834 Jy ! Component: 1800 - total flux cleaned = 0.00790592 Jy ! Component: 1850 - total flux cleaned = 0.00807281 Jy ! Component: 1900 - total flux cleaned = 0.00832078 Jy ! Component: 1950 - total flux cleaned = 0.00832084 Jy ! Component: 2000 - total flux cleaned = 0.00860447 Jy ! Component: 2050 - total flux cleaned = 0.00876536 Jy ! Component: 2100 - total flux cleaned = 0.00896439 Jy ! Component: 2150 - total flux cleaned = 0.00908277 Jy ! Component: 2200 - total flux cleaned = 0.00923936 Jy ! Component: 2250 - total flux cleaned = 0.00927812 Jy ! Component: 2300 - total flux cleaned = 0.00962357 Jy ! Component: 2350 - total flux cleaned = 0.0096231 Jy ! Component: 2400 - total flux cleaned = 0.00981135 Jy ! Component: 2450 - total flux cleaned = 0.00999848 Jy ! Component: 2500 - total flux cleaned = 0.0100726 Jy ! Component: 2550 - total flux cleaned = 0.0103296 Jy ! Component: 2600 - total flux cleaned = 0.010439 Jy ! Component: 2650 - total flux cleaned = 0.0105836 Jy ! Component: 2700 - total flux cleaned = 0.0107628 Jy ! Component: 2750 - total flux cleaned = 0.0108696 Jy ! Component: 2800 - total flux cleaned = 0.0109756 Jy ! Component: 2850 - total flux cleaned = 0.0112902 Jy ! Component: 2900 - total flux cleaned = 0.0113943 Jy ! Component: 2950 - total flux cleaned = 0.0116012 Jy ! Component: 3000 - total flux cleaned = 0.0118061 Jy ! Component: 3050 - total flux cleaned = 0.0120775 Jy ! Component: 3100 - total flux cleaned = 0.0121114 Jy ! Component: 3150 - total flux cleaned = 0.0125123 Jy ! Component: 3200 - total flux cleaned = 0.0126783 Jy ! Component: 3250 - total flux cleaned = 0.0128428 Jy ! Component: 3300 - total flux cleaned = 0.0130062 Jy ! Component: 3350 - total flux cleaned = 0.0131351 Jy ! Component: 3400 - total flux cleaned = 0.013232 Jy ! Component: 3450 - total flux cleaned = 0.0133281 Jy ! Component: 3500 - total flux cleaned = 0.0136771 Jy ! Component: 3550 - total flux cleaned = 0.0137399 Jy ! Component: 3600 - total flux cleaned = 0.0138019 Jy ! Component: 3650 - total flux cleaned = 0.0138024 Jy ! Component: 3700 - total flux cleaned = 0.0138949 Jy ! Component: 3750 - total flux cleaned = 0.0140785 Jy ! Component: 3800 - total flux cleaned = 0.01417 Jy ! Component: 3850 - total flux cleaned = 0.0142908 Jy ! Component: 3900 - total flux cleaned = 0.0143807 Jy ! Component: 3950 - total flux cleaned = 0.0145 Jy ! Component: 4000 - total flux cleaned = 0.0145296 Jy ! Component: 4050 - total flux cleaned = 0.0145885 Jy ! Total flux subtracted in 4096 components = 0.0145593 Jy ! Clean residual min=-0.001662 max=0.001460 Jy/beam ! Clean residual mean=0.000003 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 2.46259 Jy keep ! Adding 361 model components to the UV plane model. ! The established model now contains 541 components and 2.4626 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1800+7828_X_d_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9176 x 1.006 at -85.65 degrees (North through East) ! Clean map min=-0.0074895 max=1.815 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1800+7828_X_d_map.fits wmodel /image_prod/ug002_uva//J1800+7828_X_d_map.mod ! Writing 541 model components to file: /image_prod/ug002_uva//J1800+7828_X_d_map.mod wobs /image_prod/ug002_uva//J1800+7828_X_d_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1800+7828_X_d_uvs.fits wwins /image_prod/ug002_uva//J1800+7828_X_d_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J1800+7828_X_d_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.81495 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000507314 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0838557 0.0838557 0.167711 0.335423 0.670846 1.34169 2.68338 5.36677 10.7335 21.4671 42.9341 85.8683 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.814 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3577.57 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1800+7828_X_d_dfm.log closed on Thu Mar 5 03:36:04 2020