! Started logfile: /image_prod/ug002_uva//J1800+7828_X_c_dfm.log on Thu Mar 5 03:35:53 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1800+7828_X_c_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1800+7828_X_c_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.785185 visibilities/baseline/integration-bin. ! Found source: J1800+7828 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 7632 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1800+7828_X_c] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.140299Jy sigma=7.951130 ! Fit after self-cal, rms=0.959977Jy sigma=3.354797 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7629 mas, bmaj=0.8438 mas, bpa=18.1 degrees ! Estimated noise=3.00928 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.3363 Jy ! Component: 100 - total flux cleaned = 1.65371 Jy ! Total flux subtracted in 100 components = 1.65371 Jy ! Clean residual min=-0.060888 max=0.185247 Jy/beam ! Clean residual mean=0.000089 rms=0.013552 Jy/beam ! Combined flux in latest and established models = 1.65371 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 1.65371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.458630Jy sigma=1.542270 ! Fit after self-cal, rms=0.457754Jy sigma=1.539768 ! Inverting map ! Added new window around map position (-1.2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.18309 Jy ! Component: 100 - total flux cleaned = 0.295926 Jy ! Total flux subtracted in 100 components = 0.295926 Jy ! Clean residual min=-0.046284 max=0.069253 Jy/beam ! Clean residual mean=0.000066 rms=0.009377 Jy/beam ! Combined flux in latest and established models = 1.94964 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 1.94964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.301833Jy sigma=1.041833 ! Fit after self-cal, rms=0.295451Jy sigma=1.012895 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0895463 Jy ! Component: 100 - total flux cleaned = 0.148964 Jy ! Total flux subtracted in 100 components = 0.148964 Jy ! Clean residual min=-0.037098 max=0.046409 Jy/beam ! Clean residual mean=0.000055 rms=0.007557 Jy/beam ! Combined flux in latest and established models = 2.0986 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 24 components and 2.0986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.235579Jy sigma=0.832124 ! Fit after self-cal, rms=0.233909Jy sigma=0.824199 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.944 mas, bmaj=1.028 mas, bpa=23 degrees ! Estimated noise=2.22425 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0770477 Jy ! Component: 100 - total flux cleaned = 0.121891 Jy ! Component: 150 - total flux cleaned = 0.150567 Jy ! Component: 200 - total flux cleaned = 0.169528 Jy ! Total flux subtracted in 200 components = 0.169528 Jy ! Clean residual min=-0.039272 max=0.047756 Jy/beam ! Clean residual mean=0.000159 rms=0.008435 Jy/beam ! Combined flux in latest and established models = 2.26813 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 43 components and 2.26813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.198466Jy sigma=0.729451 ! Fit after self-cal, rms=0.196359Jy sigma=0.719386 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.944 x 1.028 at 23 degrees (North through East) ! Clean map min=-0.033546 max=1.768 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 0.95 KP 1.05 ! LA 0.97 MK 1.04 NL 1.16 OV 1.01 ! PT 0.88 SC 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 0.96 KP 1.05 ! LA 0.96 MK 1.05 NL 1.16 OV 1.00 ! PT 0.88 SC 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 0.97 KP 1.04 ! LA 0.98 MK 0.99 NL 1.16 OV 1.01 ! PT 0.89 SC 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 0.95 KP 1.03 ! LA 0.98 MK 1.03 NL 1.16 OV 1.01 ! PT 0.87 SC 0.97 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 0.97 KP 1.04 ! LA 0.98 MK 1.04 NL 1.17 OV 1.02 ! PT 0.89 SC 0.96 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 0.97 KP 1.05 ! LA 0.98 MK 1.05 NL 1.15 OV 1.01 ! PT 0.89 SC 0.96 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 0.99 KP 1.05 ! LA 0.98 MK 1.05 NL 1.18 OV 1.02 ! PT 0.88 SC 0.96 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.98 KP 1.04 ! LA 0.98 MK 1.05 NL 1.15 OV 1.01 ! PT 0.88 SC 1.00 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 0.99 KP 1.05 ! LA 0.98 MK 1.05 NL 1.16 OV 1.02 ! PT 0.89 SC 0.96 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 0.99 KP 1.03 ! LA 0.99 MK 1.05 NL 1.17 OV 1.02 ! PT 0.88 SC 0.96 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.99 KP 1.06 ! LA 0.99 MK 1.06 NL 1.15 OV 1.04 ! PT 0.88 SC 1.00 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 1.02 KP 1.05 ! LA 0.98 MK 1.06 NL 1.16 OV 1.05 ! PT 0.87 SC 0.99 ! ! ! Fit before self-cal, rms=0.196359Jy sigma=0.719386 ! Fit after self-cal, rms=0.086219Jy sigma=0.332716 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9444 mas, bmaj=1.036 mas, bpa=22.37 degrees ! Estimated noise=2.22247 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104496 Jy ! Component: 100 - total flux cleaned = 0.0105079 Jy ! Component: 150 - total flux cleaned = 0.0101567 Jy ! Component: 200 - total flux cleaned = 0.00964976 Jy ! Total flux subtracted in 200 components = 0.00964976 Jy ! Clean residual min=-0.013838 max=0.014698 Jy/beam ! Clean residual mean=-0.000007 rms=0.002439 Jy/beam ! Combined flux in latest and established models = 2.27778 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 2.27778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081901Jy sigma=0.313829 ! Fit after self-cal, rms=0.081326Jy sigma=0.311779 ! Inverting map ! Added new window around map position (-4.4, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116877 Jy ! Component: 100 - total flux cleaned = 0.0136876 Jy ! Component: 150 - total flux cleaned = 0.0149852 Jy ! Component: 200 - total flux cleaned = 0.0158061 Jy ! Total flux subtracted in 200 components = 0.0158061 Jy ! Clean residual min=-0.012232 max=0.010957 Jy/beam ! Clean residual mean=-0.000014 rms=0.002184 Jy/beam ! Combined flux in latest and established models = 2.29359 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 63 components and 2.29359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077879Jy sigma=0.299345 ! Fit after self-cal, rms=0.077642Jy sigma=0.298477 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077642Jy sigma=0.298477 ! Fit after self-cal, rms=0.067445Jy sigma=0.256695 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9426 mas, bmaj=1.035 mas, bpa=22.71 degrees ! Estimated noise=2.22159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00684792 Jy ! Component: 100 - total flux cleaned = 0.00783999 Jy ! Component: 150 - total flux cleaned = 0.008601 Jy ! Component: 200 - total flux cleaned = 0.00937122 Jy ! Total flux subtracted in 200 components = 0.00937122 Jy ! Clean residual min=-0.006613 max=0.009004 Jy/beam ! Clean residual mean=0.000007 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 2.30296 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 69 components and 2.30296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065921Jy sigma=0.250529 ! Fit after self-cal, rms=0.065748Jy sigma=0.249953 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.4, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00891268 Jy ! Component: 100 - total flux cleaned = 0.0147145 Jy ! Component: 150 - total flux cleaned = 0.0185279 Jy ! Component: 200 - total flux cleaned = 0.0212065 Jy ! Total flux subtracted in 200 components = 0.0212065 Jy ! Clean residual min=-0.005827 max=0.006922 Jy/beam ! Clean residual mean=0.000001 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 2.32417 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 2.32417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063900Jy sigma=0.244905 ! Fit after self-cal, rms=0.063776Jy sigma=0.244627 ! Inverting map ! Added new window around map position (-8, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632437 Jy ! Component: 100 - total flux cleaned = 0.00884746 Jy ! Component: 150 - total flux cleaned = 0.0100998 Jy ! Component: 200 - total flux cleaned = 0.0112416 Jy ! Total flux subtracted in 200 components = 0.0112416 Jy ! Clean residual min=-0.005420 max=0.004545 Jy/beam ! Clean residual mean=-0.000001 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 2.33541 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 101 components and 2.33541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062952Jy sigma=0.241789 ! Fit after self-cal, rms=0.062899Jy sigma=0.241674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062899Jy sigma=0.241674 ! Fit after self-cal, rms=0.062399Jy sigma=0.240428 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9417 mas, bmaj=1.036 mas, bpa=22.52 degrees ! Estimated noise=2.22124 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323028 Jy ! Component: 100 - total flux cleaned = 0.0051122 Jy ! Component: 150 - total flux cleaned = 0.00636673 Jy ! Component: 200 - total flux cleaned = 0.00722333 Jy ! Total flux subtracted in 200 components = 0.00722333 Jy ! Clean residual min=-0.004780 max=0.004085 Jy/beam ! Clean residual mean=0.000002 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 2.34263 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 112 components and 2.34263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061996Jy sigma=0.238939 ! Fit after self-cal, rms=0.061967Jy sigma=0.238861 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000704923 Jy ! Component: 100 - total flux cleaned = 0.00123265 Jy ! Component: 150 - total flux cleaned = 0.00181045 Jy ! Component: 200 - total flux cleaned = 0.00243184 Jy ! Total flux subtracted in 200 components = 0.00243184 Jy ! Clean residual min=-0.004625 max=0.004039 Jy/beam ! Clean residual mean=0.000002 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 2.34506 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 119 components and 2.34506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061769Jy sigma=0.238057 ! Fit after self-cal, rms=0.061756Jy sigma=0.238024 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061756Jy sigma=0.238024 ! Fit after self-cal, rms=0.061681Jy sigma=0.237823 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.163 mas, bmaj=2.345 mas, bpa=28.3 degrees ! Estimated noise=3.43642 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388017 Jy ! Component: 100 - total flux cleaned = 0.00644126 Jy ! Component: 150 - total flux cleaned = 0.00831446 Jy ! Component: 200 - total flux cleaned = 0.00938007 Jy ! Total flux subtracted in 200 components = 0.00938007 Jy ! Clean residual min=-0.005519 max=0.005716 Jy/beam ! Clean residual mean=0.000001 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 2.35444 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 131 components and 2.35444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061554Jy sigma=0.237698 ! Fit after self-cal, rms=0.061535Jy sigma=0.237644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148309 Jy ! Component: 100 - total flux cleaned = 0.00206197 Jy ! Component: 150 - total flux cleaned = 0.00253349 Jy ! Component: 200 - total flux cleaned = 0.00284335 Jy ! Total flux subtracted in 200 components = 0.00284335 Jy ! Clean residual min=-0.005292 max=0.005647 Jy/beam ! Clean residual mean=-0.000002 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 2.35729 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 140 components and 2.35729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061535Jy sigma=0.237775 ! Fit after self-cal, rms=0.061528Jy sigma=0.237764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9412 mas, bmaj=1.036 mas, bpa=22.47 degrees ! Estimated noise=2.22162 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9412 x 1.036 at 22.47 degrees (North through East) ! Clean map min=-0.0037372 max=1.7615 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061528Jy sigma=0.237764 ! Fit after self-cal, rms=0.058804Jy sigma=0.218635 ! Inverting map and beam ! Estimated beam: bmin=0.941 mas, bmaj=1.035 mas, bpa=22.4 degrees ! Estimated noise=2.22211 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000540947 Jy ! Component: 100 - total flux cleaned = 0.000354605 Jy ! Component: 150 - total flux cleaned = 0.000504539 Jy ! Component: 200 - total flux cleaned = 0.000575548 Jy ! Total flux subtracted in 200 components = 0.000575548 Jy ! Clean residual min=-0.004297 max=0.003676 Jy/beam ! Clean residual mean=0.000001 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 2.35786 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 149 components and 2.35786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058599Jy sigma=0.217665 ! Fit after self-cal, rms=0.058574Jy sigma=0.217613 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.65041e-05 Jy ! Component: 100 - total flux cleaned = 2.22663e-05 Jy ! Component: 150 - total flux cleaned = 0.000148274 Jy ! Component: 200 - total flux cleaned = 0.000206715 Jy ! Total flux subtracted in 200 components = 0.000206715 Jy ! Clean residual min=-0.004222 max=0.003639 Jy/beam ! Clean residual mean=0.000001 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 2.35807 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 155 components and 2.35807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058471Jy sigma=0.217070 ! Fit after self-cal, rms=0.058459Jy sigma=0.217051 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058459Jy sigma=0.217051 ! Fit after self-cal, rms=0.058432Jy sigma=0.216916 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7624 mas, bmaj=0.8512 mas, bpa=18.63 degrees ! Estimated noise=3.00646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.3306 Jy ! Component: 100 - total flux cleaned = 1.67865 Jy ! Component: 150 - total flux cleaned = 1.87142 Jy ! Component: 200 - total flux cleaned = 1.99115 Jy ! Total flux subtracted in 200 components = 1.99115 Jy ! Clean residual min=-0.020312 max=0.063340 Jy/beam ! Clean residual mean=0.000035 rms=0.005407 Jy/beam ! Combined flux in latest and established models = 1.99115 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.99115 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9407 mas, bmaj=1.035 mas, bpa=22.4 degrees ! Estimated noise=2.22303 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118766 Jy ! Component: 100 - total flux cleaned = 0.185625 Jy ! Component: 150 - total flux cleaned = 0.225956 Jy ! Component: 200 - total flux cleaned = 0.251769 Jy ! Total flux subtracted in 200 components = 0.251769 Jy ! Clean residual min=-0.007634 max=0.016761 Jy/beam ! Clean residual mean=0.000046 rms=0.002133 Jy/beam ! Combined flux in latest and established models = 2.24292 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 40 components and 2.24292 Jy ! Inverting map ! Added new window around map position (-2.2, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191249 Jy ! Component: 100 - total flux cleaned = 0.0331601 Jy ! Component: 150 - total flux cleaned = 0.04464 Jy ! Component: 200 - total flux cleaned = 0.0544491 Jy ! Total flux subtracted in 200 components = 0.0544491 Jy ! Clean residual min=-0.004956 max=0.006886 Jy/beam ! Clean residual mean=0.000023 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 2.29737 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 69 components and 2.29737 Jy ! Inverting map ! Added new window around map position (-6, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00875751 Jy ! Component: 100 - total flux cleaned = 0.0163994 Jy ! Component: 150 - total flux cleaned = 0.0231543 Jy ! Component: 200 - total flux cleaned = 0.0291367 Jy ! Total flux subtracted in 200 components = 0.0291367 Jy ! Clean residual min=-0.004508 max=0.005162 Jy/beam ! Clean residual mean=0.000012 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 2.32651 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 82 components and 2.32651 Jy ! Inverting map ! Added new window around map position (1, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350864 Jy ! Component: 100 - total flux cleaned = 0.00733978 Jy ! Component: 150 - total flux cleaned = 0.0108183 Jy ! Component: 200 - total flux cleaned = 0.0141504 Jy ! Total flux subtracted in 200 components = 0.0141504 Jy ! Clean residual min=-0.004075 max=0.004171 Jy/beam ! Clean residual mean=0.000007 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 2.34066 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 91 components and 2.34066 Jy ! Inverting map ! Added new window around map position (44.8, 42.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378864 Jy ! Component: 100 - total flux cleaned = 0.0064799 Jy ! Component: 150 - total flux cleaned = 0.00909888 Jy ! Component: 200 - total flux cleaned = 0.0112882 Jy ! Total flux subtracted in 200 components = 0.0112882 Jy ! Clean residual min=-0.003721 max=0.003710 Jy/beam ! Clean residual mean=0.000003 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 2.35194 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 114 components and 2.35195 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.162 mas, bmaj=2.345 mas, bpa=28.27 degrees ! Estimated noise=3.4413 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0051128 Jy ! Component: 100 - total flux cleaned = 0.00876123 Jy ! Component: 150 - total flux cleaned = 0.011043 Jy ! Component: 200 - total flux cleaned = 0.012534 Jy ! Total flux subtracted in 200 components = 0.012534 Jy ! Clean residual min=-0.005132 max=0.005059 Jy/beam ! Clean residual mean=-0.000005 rms=0.001310 Jy/beam ! Combined flux in latest and established models = 2.36448 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132416 Jy ! Component: 100 - total flux cleaned = 0.00225026 Jy ! Component: 150 - total flux cleaned = 0.00265309 Jy ! Component: 200 - total flux cleaned = 0.00302428 Jy ! Total flux subtracted in 200 components = 0.00302428 Jy ! Clean residual min=-0.005074 max=0.004943 Jy/beam ! Clean residual mean=-0.000009 rms=0.001279 Jy/beam ! Combined flux in latest and established models = 2.3675 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 180 components and 2.3675 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9407 mas, bmaj=1.035 mas, bpa=22.4 degrees ! Estimated noise=2.22303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00058058 Jy ! Component: 100 - total flux cleaned = 0.00149301 Jy ! Component: 150 - total flux cleaned = 0.00207608 Jy ! Component: 200 - total flux cleaned = 0.00238563 Jy ! Total flux subtracted in 200 components = 0.00238563 Jy ! Clean residual min=-0.003374 max=0.003346 Jy/beam ! Clean residual mean=-0.000004 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 2.36989 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 192 components and 2.36989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057849Jy sigma=0.214610 ! Fit after self-cal, rms=0.057642Jy sigma=0.213835 wmodel J1800+7828_X_c_map.mod ! Writing 192 model components to file: J1800+7828_X_c_map.mod wobs J1800+7828_X_c_uvs.fits ! Writing UV FITS file: J1800+7828_X_c_uvs.fits wwins J1800+7828_X_c_map.win ! wwins: Wrote 9 windows to J1800+7828_X_c_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000659552 Jy ! Component: 100 - total flux cleaned = 0.00110907 Jy ! Component: 150 - total flux cleaned = 0.00148325 Jy ! Component: 200 - total flux cleaned = 0.00184106 Jy ! Component: 250 - total flux cleaned = 0.00194035 Jy ! Component: 300 - total flux cleaned = 0.00198762 Jy ! Component: 350 - total flux cleaned = 0.00189207 Jy ! Component: 400 - total flux cleaned = 0.0018465 Jy ! Component: 450 - total flux cleaned = 0.00193765 Jy ! Component: 500 - total flux cleaned = 0.0019827 Jy ! Component: 550 - total flux cleaned = 0.00207031 Jy ! Component: 600 - total flux cleaned = 0.00215585 Jy ! Component: 650 - total flux cleaned = 0.00215527 Jy ! Component: 700 - total flux cleaned = 0.00227971 Jy ! Component: 750 - total flux cleaned = 0.00219745 Jy ! Component: 800 - total flux cleaned = 0.00227834 Jy ! Component: 850 - total flux cleaned = 0.00223802 Jy ! Component: 900 - total flux cleaned = 0.00227735 Jy ! Component: 950 - total flux cleaned = 0.00235526 Jy ! Component: 1000 - total flux cleaned = 0.00250874 Jy ! Component: 1050 - total flux cleaned = 0.00273435 Jy ! Component: 1100 - total flux cleaned = 0.00266058 Jy ! Component: 1150 - total flux cleaned = 0.00291756 Jy ! Component: 1200 - total flux cleaned = 0.00295398 Jy ! Component: 1250 - total flux cleaned = 0.00306128 Jy ! Component: 1300 - total flux cleaned = 0.00299111 Jy ! Component: 1350 - total flux cleaned = 0.00313107 Jy ! Component: 1400 - total flux cleaned = 0.00326866 Jy ! Component: 1450 - total flux cleaned = 0.00330255 Jy ! Component: 1500 - total flux cleaned = 0.00340378 Jy ! Component: 1550 - total flux cleaned = 0.00347105 Jy ! Component: 1600 - total flux cleaned = 0.00357045 Jy ! Component: 1650 - total flux cleaned = 0.00363601 Jy ! Component: 1700 - total flux cleaned = 0.00376515 Jy ! Component: 1750 - total flux cleaned = 0.00373285 Jy ! Component: 1800 - total flux cleaned = 0.00373296 Jy ! Component: 1850 - total flux cleaned = 0.00373315 Jy ! Component: 1900 - total flux cleaned = 0.00376477 Jy ! Component: 1950 - total flux cleaned = 0.00364156 Jy ! Component: 2000 - total flux cleaned = 0.00370258 Jy ! Component: 2050 - total flux cleaned = 0.00376327 Jy ! Component: 2100 - total flux cleaned = 0.00370359 Jy ! Component: 2150 - total flux cleaned = 0.00376292 Jy ! Component: 2200 - total flux cleaned = 0.00367499 Jy ! Component: 2250 - total flux cleaned = 0.0037043 Jy ! Component: 2300 - total flux cleaned = 0.00390604 Jy ! Component: 2350 - total flux cleaned = 0.00387721 Jy ! Component: 2400 - total flux cleaned = 0.00387726 Jy ! Component: 2450 - total flux cleaned = 0.00396153 Jy ! Component: 2500 - total flux cleaned = 0.00387823 Jy ! Component: 2550 - total flux cleaned = 0.0039335 Jy ! Component: 2600 - total flux cleaned = 0.0039334 Jy ! Component: 2650 - total flux cleaned = 0.00412265 Jy ! Component: 2700 - total flux cleaned = 0.00396149 Jy ! Component: 2750 - total flux cleaned = 0.00388181 Jy ! Component: 2800 - total flux cleaned = 0.0039085 Jy ! Component: 2850 - total flux cleaned = 0.00396082 Jy ! Component: 2900 - total flux cleaned = 0.00388293 Jy ! Component: 2950 - total flux cleaned = 0.00390883 Jy ! Component: 3000 - total flux cleaned = 0.00383228 Jy ! Component: 3050 - total flux cleaned = 0.0037563 Jy ! Component: 3100 - total flux cleaned = 0.00380699 Jy ! Component: 3150 - total flux cleaned = 0.00385677 Jy ! Component: 3200 - total flux cleaned = 0.00373293 Jy ! Component: 3250 - total flux cleaned = 0.00373311 Jy ! Component: 3300 - total flux cleaned = 0.00370841 Jy ! Component: 3350 - total flux cleaned = 0.00363594 Jy ! Component: 3400 - total flux cleaned = 0.00361214 Jy ! Component: 3450 - total flux cleaned = 0.00358835 Jy ! Component: 3500 - total flux cleaned = 0.00361224 Jy ! Component: 3550 - total flux cleaned = 0.0035885 Jy ! Component: 3600 - total flux cleaned = 0.00356533 Jy ! Component: 3650 - total flux cleaned = 0.00361152 Jy ! Component: 3700 - total flux cleaned = 0.00354229 Jy ! Component: 3750 - total flux cleaned = 0.00354216 Jy ! Component: 3800 - total flux cleaned = 0.0035193 Jy ! Component: 3850 - total flux cleaned = 0.00345182 Jy ! Component: 3900 - total flux cleaned = 0.00354123 Jy ! Component: 3950 - total flux cleaned = 0.00345248 Jy ! Component: 4000 - total flux cleaned = 0.00347464 Jy ! Component: 4050 - total flux cleaned = 0.00340895 Jy ! Total flux subtracted in 4096 components = 0.00343061 Jy ! Clean residual min=-0.001290 max=0.001388 Jy/beam ! Clean residual mean=-0.000002 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 2.37332 Jy keep ! Adding 341 model components to the UV plane model. ! The established model now contains 533 components and 2.37332 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1800+7828_X_c_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9407 x 1.035 at 22.4 degrees (North through East) ! Clean map min=-0.0019785 max=1.7648 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1800+7828_X_c_map.fits wmodel /image_prod/ug002_uva//J1800+7828_X_c_map.mod ! Writing 533 model components to file: /image_prod/ug002_uva//J1800+7828_X_c_map.mod wobs /image_prod/ug002_uva//J1800+7828_X_c_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1800+7828_X_c_uvs.fits wwins /image_prod/ug002_uva//J1800+7828_X_c_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J1800+7828_X_c_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.76483 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000366496 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0622999 0.0622999 0.1246 0.249199 0.498399 0.996798 1.9936 3.98719 7.97438 15.9488 31.8975 63.7951 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.764 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4815.42 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1800+7828_X_c_dfm.log closed on Thu Mar 5 03:35:58 2020