! Started logfile: /image_prod/ug002_uva//J1759+2343_X_dfm.log on Thu Mar 5 03:34:12 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1759+2343_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1759+2343_X_uva.fits ! AN table 1: 75 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.982857 visibilities/baseline/integration-bin. ! Found source: J1759+2343 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 24768 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1759+2343_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.014583Jy sigma=9.276833 ! Fit after self-cal, rms=0.897366Jy sigma=8.143969 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6577 mas, bmaj=1.403 mas, bpa=-6.965 degrees ! Estimated noise=1.01455 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0789495 Jy ! Component: 100 - total flux cleaned = 0.119153 Jy ! Total flux subtracted in 100 components = 0.119153 Jy ! Clean residual min=-0.010660 max=0.030517 Jy/beam ! Clean residual mean=-0.000001 rms=0.002929 Jy/beam ! Combined flux in latest and established models = 0.119153 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.119153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092607Jy sigma=0.838061 ! Fit after self-cal, rms=0.090211Jy sigma=0.824198 ! Inverting map ! Added new window around map position (1, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0330324 Jy ! Component: 100 - total flux cleaned = 0.0548662 Jy ! Total flux subtracted in 100 components = 0.0548662 Jy ! Clean residual min=-0.008461 max=0.019957 Jy/beam ! Clean residual mean=-0.000001 rms=0.002030 Jy/beam ! Combined flux in latest and established models = 0.17402 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 14 components and 0.17402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071594Jy sigma=0.637460 ! Fit after self-cal, rms=0.070705Jy sigma=0.630155 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018362 Jy ! Component: 100 - total flux cleaned = 0.029938 Jy ! Total flux subtracted in 100 components = 0.029938 Jy ! Clean residual min=-0.007827 max=0.014721 Jy/beam ! Clean residual mean=-0.000001 rms=0.001545 Jy/beam ! Combined flux in latest and established models = 0.203958 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.203958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063495Jy sigma=0.552604 ! Fit after self-cal, rms=0.062975Jy sigma=0.547396 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010871 Jy ! Component: 100 - total flux cleaned = 0.0178901 Jy ! Total flux subtracted in 100 components = 0.0178901 Jy ! Clean residual min=-0.006648 max=0.010809 Jy/beam ! Clean residual mean=-0.000001 rms=0.001266 Jy/beam ! Combined flux in latest and established models = 0.221848 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 30 components and 0.221848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060009Jy sigma=0.513578 ! Fit after self-cal, rms=0.059791Jy sigma=0.511219 ! Inverting map ! Added new window around map position (-1, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00863659 Jy ! Component: 100 - total flux cleaned = 0.0124089 Jy ! Total flux subtracted in 100 components = 0.0124089 Jy ! Clean residual min=-0.004840 max=0.005420 Jy/beam ! Clean residual mean=-0.000001 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.234257 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.234257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058177Jy sigma=0.492253 ! Fit after self-cal, rms=0.058090Jy sigma=0.491671 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8071 mas, bmaj=1.624 mas, bpa=-5.251 degrees ! Estimated noise=0.502214 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00844454 Jy ! Component: 100 - total flux cleaned = 0.0146792 Jy ! Component: 150 - total flux cleaned = 0.0196163 Jy ! Component: 200 - total flux cleaned = 0.0236069 Jy ! Total flux subtracted in 200 components = 0.0236069 Jy ! Clean residual min=-0.004933 max=0.005036 Jy/beam ! Clean residual mean=0.000000 rms=0.001130 Jy/beam ! Combined flux in latest and established models = 0.257863 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 49 components and 0.257863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056600Jy sigma=0.472106 ! Fit after self-cal, rms=0.056554Jy sigma=0.471665 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8071 x 1.624 at -5.251 degrees (North through East) ! Clean map min=-0.0046283 max=0.10098 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.10 KP 0.98 ! MK 1.00 NL 1.07 OV 0.87 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.05 KP 0.99 ! MK 0.97 NL 1.11 OV 0.88 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.06 KP 0.95 ! MK 0.97 NL 1.05 OV 0.89 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.09 KP 0.96 ! MK 1.01 NL 1.04 OV 0.89 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.10 KP 0.98 ! MK 0.98 NL 1.06 OV 0.90 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.16 KP 0.97 ! MK 1.03 NL 1.08 OV 0.90 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 1.10 KP 0.98 ! MK 1.03 NL 1.03 OV 0.89 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 1.08 KP 0.97 ! MK 0.98 NL 1.07 OV 0.90 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.11 KP 0.98 ! MK 1.03 NL 1.05 OV 0.91 SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.11 KP 0.98 ! MK 1.01 NL 1.05 OV 0.92 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.08 KP 0.98 ! MK 0.98 NL 1.10 OV 0.90 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.07 KP 0.95 ! MK 1.04 NL 1.07 OV 0.90 SC 1.01 ! ! ! Fit before self-cal, rms=0.056554Jy sigma=0.471665 ! Fit after self-cal, rms=0.056750Jy sigma=0.456899 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8114 mas, bmaj=1.637 mas, bpa=-4.778 degrees ! Estimated noise=0.503206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.8, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262168 Jy ! Component: 100 - total flux cleaned = 0.00337395 Jy ! Component: 150 - total flux cleaned = 0.00377342 Jy ! Component: 200 - total flux cleaned = 0.00419093 Jy ! Total flux subtracted in 200 components = 0.00419093 Jy ! Clean residual min=-0.002863 max=0.003846 Jy/beam ! Clean residual mean=-0.000001 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.262054 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.262054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056236Jy sigma=0.451653 ! Fit after self-cal, rms=0.056221Jy sigma=0.451075 ! Inverting map ! Added new window around map position (-2, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00326768 Jy ! Component: 100 - total flux cleaned = 0.00433528 Jy ! Component: 150 - total flux cleaned = 0.00564246 Jy ! Component: 200 - total flux cleaned = 0.00673166 Jy ! Total flux subtracted in 200 components = 0.00673166 Jy ! Clean residual min=-0.002330 max=0.002638 Jy/beam ! Clean residual mean=-0.000000 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.268786 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 0.268786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055937Jy sigma=0.448228 ! Fit after self-cal, rms=0.055923Jy sigma=0.448110 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055923Jy sigma=0.448110 ! Fit after self-cal, rms=0.056488Jy sigma=0.445960 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8071 mas, bmaj=1.633 mas, bpa=-5.248 degrees ! Estimated noise=0.50014 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000235786 Jy ! Component: 100 - total flux cleaned = 0.000348178 Jy ! Component: 150 - total flux cleaned = 0.000550199 Jy ! Component: 200 - total flux cleaned = 0.000735369 Jy ! Total flux subtracted in 200 components = 0.000735369 Jy ! Clean residual min=-0.002000 max=0.002380 Jy/beam ! Clean residual mean=-0.000000 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.269521 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 97 components and 0.269521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056388Jy sigma=0.445023 ! Fit after self-cal, rms=0.056383Jy sigma=0.444965 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, 13.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000979421 Jy ! Component: 100 - total flux cleaned = 0.000987677 Jy ! Component: 150 - total flux cleaned = 0.000940693 Jy ! Component: 200 - total flux cleaned = 0.000898418 Jy ! Total flux subtracted in 200 components = 0.000898418 Jy ! Clean residual min=-0.001835 max=0.002062 Jy/beam ! Clean residual mean=-0.000000 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.27042 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 113 components and 0.27042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056266Jy sigma=0.443871 ! Fit after self-cal, rms=0.056262Jy sigma=0.443819 ! Inverting map ! Added new window around map position (1.4, 17.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189387 Jy ! Component: 100 - total flux cleaned = 0.00234854 Jy ! Component: 150 - total flux cleaned = 0.0026142 Jy ! Component: 200 - total flux cleaned = 0.00281874 Jy ! Total flux subtracted in 200 components = 0.00281874 Jy ! Clean residual min=-0.001662 max=0.001882 Jy/beam ! Clean residual mean=-0.000000 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.273239 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 127 components and 0.273239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056157Jy sigma=0.442860 ! Fit after self-cal, rms=0.056157Jy sigma=0.442786 ! Inverting map ! Added new window around map position (19.6, -14.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106935 Jy ! Component: 100 - total flux cleaned = 0.00124144 Jy ! Component: 150 - total flux cleaned = 0.00139766 Jy ! Component: 200 - total flux cleaned = 0.00147075 Jy ! Total flux subtracted in 200 components = 0.00147075 Jy ! Clean residual min=-0.001652 max=0.001595 Jy/beam ! Clean residual mean=-0.000000 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.274709 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 145 components and 0.274709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056084Jy sigma=0.442078 ! Fit after self-cal, rms=0.056080Jy sigma=0.442028 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056080Jy sigma=0.442028 ! Fit after self-cal, rms=0.055989Jy sigma=0.441831 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8076 mas, bmaj=1.633 mas, bpa=-5.263 degrees ! Estimated noise=0.49982 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000679118 Jy ! Component: 100 - total flux cleaned = 0.00106559 Jy ! Component: 150 - total flux cleaned = 0.00134909 Jy ! Component: 200 - total flux cleaned = 0.00148059 Jy ! Total flux subtracted in 200 components = 0.00148059 Jy ! Clean residual min=-0.001629 max=0.001486 Jy/beam ! Clean residual mean=-0.000000 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.27619 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 150 components and 0.27619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055942Jy sigma=0.441377 ! Fit after self-cal, rms=0.055939Jy sigma=0.441357 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173851 Jy ! Component: 100 - total flux cleaned = 0.000267161 Jy ! Component: 150 - total flux cleaned = 0.000384058 Jy ! Component: 200 - total flux cleaned = 0.000496152 Jy ! Total flux subtracted in 200 components = 0.000496152 Jy ! Clean residual min=-0.001547 max=0.001431 Jy/beam ! Clean residual mean=-0.000000 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.276686 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 155 components and 0.276686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055909Jy sigma=0.441085 ! Fit after self-cal, rms=0.055907Jy sigma=0.441074 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055907Jy sigma=0.441074 ! Fit after self-cal, rms=0.055877Jy sigma=0.441037 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.784 mas, bmaj=2.336 mas, bpa=-4.654 degrees ! Estimated noise=0.638215 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000309562 Jy ! Component: 100 - total flux cleaned = 0.000676672 Jy ! Component: 150 - total flux cleaned = 0.000983431 Jy ! Component: 200 - total flux cleaned = 0.00109343 Jy ! Total flux subtracted in 200 components = 0.00109343 Jy ! Clean residual min=-0.001108 max=0.001466 Jy/beam ! Clean residual mean=-0.000000 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.277779 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 167 components and 0.277779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055864Jy sigma=0.440929 ! Fit after self-cal, rms=0.055858Jy sigma=0.440900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-26.4, -12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000713639 Jy ! Component: 100 - total flux cleaned = 0.00046459 Jy ! Component: 150 - total flux cleaned = 0.000387157 Jy ! Component: 200 - total flux cleaned = 0.0003628 Jy ! Total flux subtracted in 200 components = 0.0003628 Jy ! Clean residual min=-0.000956 max=0.000982 Jy/beam ! Clean residual mean=-0.000000 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.278142 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 195 components and 0.278142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055840Jy sigma=0.440699 ! Fit after self-cal, rms=0.055837Jy sigma=0.440663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8078 mas, bmaj=1.633 mas, bpa=-5.278 degrees ! Estimated noise=0.499561 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8078 x 1.633 at -5.278 degrees (North through East) ! Clean map min=-0.0031539 max=0.09841 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6571 mas, bmaj=1.407 mas, bpa=-6.92 degrees ! Estimated noise=1.01252 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0829436 Jy ! Component: 100 - total flux cleaned = 0.130044 Jy ! Component: 150 - total flux cleaned = 0.158507 Jy ! Component: 200 - total flux cleaned = 0.17796 Jy ! Total flux subtracted in 200 components = 0.17796 Jy ! Clean residual min=-0.006236 max=0.010906 Jy/beam ! Clean residual mean=-0.000001 rms=0.001553 Jy/beam ! Combined flux in latest and established models = 0.17796 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.17796 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8078 mas, bmaj=1.633 mas, bpa=-5.278 degrees ! Estimated noise=0.499561 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021393 Jy ! Component: 100 - total flux cleaned = 0.0355817 Jy ! Component: 150 - total flux cleaned = 0.0455601 Jy ! Component: 200 - total flux cleaned = 0.0531519 Jy ! Total flux subtracted in 200 components = 0.0531519 Jy ! Clean residual min=-0.003769 max=0.004703 Jy/beam ! Clean residual mean=0.000000 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.231112 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 33 components and 0.231112 Jy ! Inverting map ! Added new window around map position (2, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608595 Jy ! Component: 100 - total flux cleaned = 0.0109027 Jy ! Component: 150 - total flux cleaned = 0.0143503 Jy ! Component: 200 - total flux cleaned = 0.0173889 Jy ! Total flux subtracted in 200 components = 0.0173889 Jy ! Clean residual min=-0.002687 max=0.003137 Jy/beam ! Clean residual mean=0.000000 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.248501 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 57 components and 0.248501 Jy ! Inverting map ! Added new window around map position (-14.4, 23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299273 Jy ! Component: 100 - total flux cleaned = 0.00542594 Jy ! Component: 150 - total flux cleaned = 0.00751414 Jy ! Component: 200 - total flux cleaned = 0.00950581 Jy ! Total flux subtracted in 200 components = 0.00950581 Jy ! Clean residual min=-0.002210 max=0.002150 Jy/beam ! Clean residual mean=0.000000 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.258006 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 78 components and 0.258006 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.784 mas, bmaj=2.336 mas, bpa=-4.654 degrees ! Estimated noise=0.638215 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00410972 Jy ! Component: 100 - total flux cleaned = 0.00672892 Jy ! Component: 150 - total flux cleaned = 0.00778269 Jy ! Component: 200 - total flux cleaned = 0.0086555 Jy ! Total flux subtracted in 200 components = 0.0086555 Jy ! Clean residual min=-0.001988 max=0.001957 Jy/beam ! Clean residual mean=0.000000 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.266662 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105208 Jy ! Component: 100 - total flux cleaned = 0.00192604 Jy ! Component: 150 - total flux cleaned = 0.00266475 Jy ! Component: 200 - total flux cleaned = 0.00344889 Jy ! Total flux subtracted in 200 components = 0.00344889 Jy ! Clean residual min=-0.001594 max=0.001443 Jy/beam ! Clean residual mean=-0.000000 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.270111 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 144 components and 0.270111 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8078 mas, bmaj=1.633 mas, bpa=-5.278 degrees ! Estimated noise=0.499561 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209741 Jy ! Component: 100 - total flux cleaned = 0.000909181 Jy ! Component: 150 - total flux cleaned = 0.00148533 Jy ! Component: 200 - total flux cleaned = 0.00196061 Jy ! Total flux subtracted in 200 components = 0.00196061 Jy ! Clean residual min=-0.001571 max=0.001931 Jy/beam ! Clean residual mean=-0.000000 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.272071 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 168 components and 0.272071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055950Jy sigma=0.441936 ! Fit after self-cal, rms=0.055888Jy sigma=0.441189 wmodel J1759+2343_X_map.mod ! Writing 168 model components to file: J1759+2343_X_map.mod wobs J1759+2343_X_uvs.fits ! Writing UV FITS file: J1759+2343_X_uvs.fits wwins J1759+2343_X_map.win ! wwins: Wrote 11 windows to J1759+2343_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103822 Jy ! Component: 100 - total flux cleaned = 2.8836e-05 Jy ! Component: 150 - total flux cleaned = -4.1746e-05 Jy ! Component: 200 - total flux cleaned = -6.4278e-05 Jy ! Component: 250 - total flux cleaned = -8.55317e-05 Jy ! Component: 300 - total flux cleaned = -0.000106094 Jy ! Component: 350 - total flux cleaned = -0.000166801 Jy ! Component: 400 - total flux cleaned = -0.000148076 Jy ! Component: 450 - total flux cleaned = -0.000205023 Jy ! Component: 500 - total flux cleaned = -0.000222953 Jy ! Component: 550 - total flux cleaned = -0.000204609 Jy ! Component: 600 - total flux cleaned = -0.00018657 Jy ! Component: 650 - total flux cleaned = -0.000169735 Jy ! Component: 700 - total flux cleaned = -0.000170289 Jy ! Component: 750 - total flux cleaned = -0.000219265 Jy ! Component: 800 - total flux cleaned = -0.000171022 Jy ! Component: 850 - total flux cleaned = -0.000218486 Jy ! Component: 900 - total flux cleaned = -0.000218301 Jy ! Component: 950 - total flux cleaned = -0.000263792 Jy ! Component: 1000 - total flux cleaned = -0.000352878 Jy ! Component: 1050 - total flux cleaned = -0.000352369 Jy ! Component: 1100 - total flux cleaned = -0.000381263 Jy ! Component: 1150 - total flux cleaned = -0.000409801 Jy ! Component: 1200 - total flux cleaned = -0.00046581 Jy ! Component: 1250 - total flux cleaned = -0.00043829 Jy ! Component: 1300 - total flux cleaned = -0.000492711 Jy ! Component: 1350 - total flux cleaned = -0.000532844 Jy ! Component: 1400 - total flux cleaned = -0.000585502 Jy ! Component: 1450 - total flux cleaned = -0.000611509 Jy ! Component: 1500 - total flux cleaned = -0.000675643 Jy ! Component: 1550 - total flux cleaned = -0.000688182 Jy ! Component: 1600 - total flux cleaned = -0.000763375 Jy ! Component: 1650 - total flux cleaned = -0.000775492 Jy ! Component: 1700 - total flux cleaned = -0.000787855 Jy ! Component: 1750 - total flux cleaned = -0.000824229 Jy ! Component: 1800 - total flux cleaned = -0.000848376 Jy ! Component: 1850 - total flux cleaned = -0.000895737 Jy ! Component: 1900 - total flux cleaned = -0.000895902 Jy ! Component: 1950 - total flux cleaned = -0.000907584 Jy ! Component: 2000 - total flux cleaned = -0.000953431 Jy ! Component: 2050 - total flux cleaned = -0.000930984 Jy ! Component: 2100 - total flux cleaned = -0.000964494 Jy ! Component: 2150 - total flux cleaned = -0.000953673 Jy ! Component: 2200 - total flux cleaned = -0.000942795 Jy ! Component: 2250 - total flux cleaned = -0.00097518 Jy ! Component: 2300 - total flux cleaned = -0.00099641 Jy ! Component: 2350 - total flux cleaned = -0.00098585 Jy ! Component: 2400 - total flux cleaned = -0.00101737 Jy ! Component: 2450 - total flux cleaned = -0.00101748 Jy ! Component: 2500 - total flux cleaned = -0.000986637 Jy ! Component: 2550 - total flux cleaned = -0.00102734 Jy ! Component: 2600 - total flux cleaned = -0.000997023 Jy ! Component: 2650 - total flux cleaned = -0.00100711 Jy ! Component: 2700 - total flux cleaned = -0.000977285 Jy ! Component: 2750 - total flux cleaned = -0.000938041 Jy ! Component: 2800 - total flux cleaned = -0.000899033 Jy ! Component: 2850 - total flux cleaned = -0.000850811 Jy ! Component: 2900 - total flux cleaned = -0.000870038 Jy ! Component: 2950 - total flux cleaned = -0.000822492 Jy ! Component: 3000 - total flux cleaned = -0.000831958 Jy ! Component: 3050 - total flux cleaned = -0.000794531 Jy ! Component: 3100 - total flux cleaned = -0.00077605 Jy ! Component: 3150 - total flux cleaned = -0.00073924 Jy ! Component: 3200 - total flux cleaned = -0.000702879 Jy ! Component: 3250 - total flux cleaned = -0.000684706 Jy ! Component: 3300 - total flux cleaned = -0.000666856 Jy ! Component: 3350 - total flux cleaned = -0.000657906 Jy ! Component: 3400 - total flux cleaned = -0.000596039 Jy ! Component: 3450 - total flux cleaned = -0.000569614 Jy ! Component: 3500 - total flux cleaned = -0.000534822 Jy ! Component: 3550 - total flux cleaned = -0.000508809 Jy ! Component: 3600 - total flux cleaned = -0.000474402 Jy ! Component: 3650 - total flux cleaned = -0.000448808 Jy ! Component: 3700 - total flux cleaned = -0.000406479 Jy ! Component: 3750 - total flux cleaned = -0.000372757 Jy ! Component: 3800 - total flux cleaned = -0.00033103 Jy ! Component: 3850 - total flux cleaned = -0.000322725 Jy ! Component: 3900 - total flux cleaned = -0.000289837 Jy ! Component: 3950 - total flux cleaned = -0.000273434 Jy ! Component: 4000 - total flux cleaned = -0.000281575 Jy ! Component: 4050 - total flux cleaned = -0.000233054 Jy ! Total flux subtracted in 4096 components = -0.000184883 Jy ! Clean residual min=-0.000427 max=0.000496 Jy/beam ! Clean residual mean=0.000000 rms=0.000135 Jy/beam ! Combined flux in latest and established models = 0.271887 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 460 components and 0.271886 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1759+2343_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8078 x 1.633 at -5.278 degrees (North through East) ! Clean map min=-0.0019088 max=0.097433 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1759+2343_X_map.fits wmodel /image_prod/ug002_uva//J1759+2343_X_map.mod ! Writing 460 model components to file: /image_prod/ug002_uva//J1759+2343_X_map.mod wobs /image_prod/ug002_uva//J1759+2343_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1759+2343_X_uvs.fits wwins /image_prod/ug002_uva//J1759+2343_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J1759+2343_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0974331 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000134344 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.41365 0.41365 0.8273 1.6546 3.3092 6.6184 13.2368 26.4736 52.9472 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.097 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 725.25 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1759+2343_X_dfm.log closed on Thu Mar 5 03:34:17 2020