! Started logfile: /image_prod/ug002_uva//J1751+0939_X_a_dfm.log on Thu Mar 5 03:28:38 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1751+0939_X_a_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1751+0939_X_a_uva.fits ! AN table 1: 18 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.848765 visibilities/baseline/integration-bin. ! Found source: J1751+0939 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 6600 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1751+0939_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.066952Jy sigma=8.391321 ! Fit after self-cal, rms=0.827824Jy sigma=3.249402 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7276 mas, bmaj=3.002 mas, bpa=-18.83 degrees ! Estimated noise=2.91807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.28261 Jy ! Component: 100 - total flux cleaned = 1.59383 Jy ! Total flux subtracted in 100 components = 1.59383 Jy ! Clean residual min=-0.056502 max=0.127957 Jy/beam ! Clean residual mean=-0.000052 rms=0.013933 Jy/beam ! Combined flux in latest and established models = 1.59383 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.59383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.361503Jy sigma=1.384435 ! Fit after self-cal, rms=0.361390Jy sigma=1.384188 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138815 Jy ! Component: 100 - total flux cleaned = 0.221553 Jy ! Total flux subtracted in 100 components = 0.221553 Jy ! Clean residual min=-0.046200 max=0.091681 Jy/beam ! Clean residual mean=-0.000030 rms=0.010471 Jy/beam ! Combined flux in latest and established models = 1.81538 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 13 components and 1.81538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.263182Jy sigma=1.050807 ! Fit after self-cal, rms=0.262836Jy sigma=1.049597 ! Inverting map ! Added new window around map position (1.6, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0805327 Jy ! Component: 100 - total flux cleaned = 0.130848 Jy ! Total flux subtracted in 100 components = 0.130848 Jy ! Clean residual min=-0.038052 max=0.080113 Jy/beam ! Clean residual mean=-0.000017 rms=0.008891 Jy/beam ! Combined flux in latest and established models = 1.94623 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 1.94623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.221023Jy sigma=0.899283 ! Fit after self-cal, rms=0.218692Jy sigma=0.890222 ! Inverting map ! Added new window around map position (-1.8, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0616833 Jy ! Component: 100 - total flux cleaned = 0.0971993 Jy ! Total flux subtracted in 100 components = 0.0971993 Jy ! Clean residual min=-0.037067 max=0.042026 Jy/beam ! Clean residual mean=-0.000007 rms=0.007751 Jy/beam ! Combined flux in latest and established models = 2.04343 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 36 components and 2.04343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.194119Jy sigma=0.796392 ! Fit after self-cal, rms=0.193597Jy sigma=0.794098 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9123 mas, bmaj=3.094 mas, bpa=-18.09 degrees ! Estimated noise=2.18486 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0387882 Jy ! Component: 100 - total flux cleaned = 0.0520487 Jy ! Component: 150 - total flux cleaned = 0.0579692 Jy ! Component: 200 - total flux cleaned = 0.0630439 Jy ! Total flux subtracted in 200 components = 0.0630439 Jy ! Clean residual min=-0.038980 max=0.046639 Jy/beam ! Clean residual mean=0.000006 rms=0.009442 Jy/beam ! Combined flux in latest and established models = 2.10648 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 60 components and 2.10648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.179362Jy sigma=0.743928 ! Fit after self-cal, rms=0.179152Jy sigma=0.742982 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9123 x 3.094 at -18.09 degrees (North through East) ! Clean map min=-0.037113 max=1.6843 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.05 KP 1.07 ! LA 1.02 MK 1.02 NL 1.04 OV 0.93 ! PT 0.90 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.02 KP 1.07 ! LA 1.01 MK 1.02 NL 1.06 OV 0.92 ! PT 0.91 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.03 KP 1.07 ! LA 1.01 MK 1.00 NL 1.04 OV 0.91 ! PT 0.90 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.03 KP 1.08 ! LA 1.02 MK 1.02 NL 1.06 OV 0.92 ! PT 0.90 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.03 KP 1.07 ! LA 1.00 MK 1.01 NL 1.05 OV 0.91 ! PT 0.92 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.05 KP 1.07 ! LA 1.01 MK 1.00 NL 1.05 OV 0.92 ! PT 0.91 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.02 KP 1.07 ! LA 1.00 MK 1.02 NL 1.06 OV 0.92 ! PT 0.90 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.04 KP 1.07 ! LA 1.01 MK 1.02 NL 1.05 OV 0.91 ! PT 0.90 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.04 KP 1.08 ! LA 1.00 MK 1.01 NL 1.04 OV 0.91 ! PT 0.91 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.04 KP 1.07 ! LA 1.00 MK 1.02 NL 1.05 OV 0.91 ! PT 0.91 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.04 KP 1.07 ! LA 1.01 MK 1.00 NL 1.06 OV 0.92 ! PT 0.90 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.05 KP 1.09 ! LA 0.99 MK 1.02 NL 1.05 OV 0.92 ! PT 0.90 ! ! ! Fit before self-cal, rms=0.179152Jy sigma=0.742982 ! Fit after self-cal, rms=0.123121Jy sigma=0.524003 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.925 mas, bmaj=3.082 mas, bpa=-17.97 degrees ! Estimated noise=2.18842 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0251758 Jy ! Component: 100 - total flux cleaned = -0.0394842 Jy ! Component: 150 - total flux cleaned = -0.0475526 Jy ! Component: 200 - total flux cleaned = -0.0521643 Jy ! Total flux subtracted in 200 components = -0.0521643 Jy ! Clean residual min=-0.022983 max=0.023757 Jy/beam ! Clean residual mean=0.000002 rms=0.005549 Jy/beam ! Combined flux in latest and established models = 2.05431 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 2.05431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116659Jy sigma=0.497200 ! Fit after self-cal, rms=0.116598Jy sigma=0.496982 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116598Jy sigma=0.496982 ! Fit after self-cal, rms=0.094960Jy sigma=0.382751 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9231 mas, bmaj=3.081 mas, bpa=-17.84 degrees ! Estimated noise=2.18705 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0242488 Jy ! Component: 100 - total flux cleaned = -0.0316805 Jy ! Component: 150 - total flux cleaned = -0.0317058 Jy ! Component: 200 - total flux cleaned = -0.0304234 Jy ! Total flux subtracted in 200 components = -0.0304234 Jy ! Clean residual min=-0.014618 max=0.014426 Jy/beam ! Clean residual mean=-0.000004 rms=0.003162 Jy/beam ! Combined flux in latest and established models = 2.02389 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 83 components and 2.02389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088072Jy sigma=0.355380 ! Fit after self-cal, rms=0.088031Jy sigma=0.355154 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000457359 Jy ! Component: 100 - total flux cleaned = 0.00224712 Jy ! Component: 150 - total flux cleaned = 0.00336668 Jy ! Component: 200 - total flux cleaned = 0.00435656 Jy ! Total flux subtracted in 200 components = 0.00435656 Jy ! Clean residual min=-0.013644 max=0.014215 Jy/beam ! Clean residual mean=-0.000004 rms=0.003082 Jy/beam ! Combined flux in latest and established models = 2.02824 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 91 components and 2.02824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086841Jy sigma=0.350566 ! Fit after self-cal, rms=0.086794Jy sigma=0.350419 ! Inverting map ! Added new window around map position (1.6, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130612 Jy ! Component: 100 - total flux cleaned = 0.0169094 Jy ! Component: 150 - total flux cleaned = 0.0184364 Jy ! Component: 200 - total flux cleaned = 0.0197951 Jy ! Total flux subtracted in 200 components = 0.0197951 Jy ! Clean residual min=-0.012976 max=0.010611 Jy/beam ! Clean residual mean=-0.000006 rms=0.002877 Jy/beam ! Combined flux in latest and established models = 2.04804 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 112 components and 2.04804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084378Jy sigma=0.340041 ! Fit after self-cal, rms=0.084278Jy sigma=0.339540 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084278Jy sigma=0.339540 ! Fit after self-cal, rms=0.081365Jy sigma=0.326598 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9234 mas, bmaj=3.077 mas, bpa=-17.81 degrees ! Estimated noise=2.18639 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0150015 Jy ! Component: 100 - total flux cleaned = -0.0195985 Jy ! Component: 150 - total flux cleaned = -0.0191484 Jy ! Component: 200 - total flux cleaned = -0.0189523 Jy ! Total flux subtracted in 200 components = -0.0189523 Jy ! Clean residual min=-0.010778 max=0.008697 Jy/beam ! Clean residual mean=-0.000006 rms=0.002283 Jy/beam ! Combined flux in latest and established models = 2.02909 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 122 components and 2.02909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078318Jy sigma=0.314715 ! Fit after self-cal, rms=0.078300Jy sigma=0.314648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000455594 Jy ! Component: 100 - total flux cleaned = 0.000129312 Jy ! Component: 150 - total flux cleaned = -0.000171771 Jy ! Component: 200 - total flux cleaned = -0.000170839 Jy ! Total flux subtracted in 200 components = -0.000170839 Jy ! Clean residual min=-0.010368 max=0.008167 Jy/beam ! Clean residual mean=-0.000006 rms=0.002234 Jy/beam ! Combined flux in latest and established models = 2.02892 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 133 components and 2.02892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077742Jy sigma=0.312286 ! Fit after self-cal, rms=0.077727Jy sigma=0.312237 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077727Jy sigma=0.312237 ! Fit after self-cal, rms=0.076422Jy sigma=0.306772 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.094 mas, bmaj=3.22 mas, bpa=-12.22 degrees ! Estimated noise=2.81321 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0115963 Jy ! Component: 100 - total flux cleaned = -0.0150712 Jy ! Component: 150 - total flux cleaned = -0.0147646 Jy ! Component: 200 - total flux cleaned = -0.0144977 Jy ! Total flux subtracted in 200 components = -0.0144977 Jy ! Clean residual min=-0.012619 max=0.009383 Jy/beam ! Clean residual mean=-0.000011 rms=0.002923 Jy/beam ! Combined flux in latest and established models = 2.01442 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 148 components and 2.01442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075007Jy sigma=0.301920 ! Fit after self-cal, rms=0.074992Jy sigma=0.301871 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131058 Jy ! Component: 100 - total flux cleaned = 0.000439139 Jy ! Component: 150 - total flux cleaned = 0.000533274 Jy ! Component: 200 - total flux cleaned = 0.000625502 Jy ! Total flux subtracted in 200 components = 0.000625502 Jy ! Clean residual min=-0.012174 max=0.009253 Jy/beam ! Clean residual mean=-0.000011 rms=0.002892 Jy/beam ! Combined flux in latest and established models = 2.01504 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 173 components and 2.01504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074832Jy sigma=0.301318 ! Fit after self-cal, rms=0.074827Jy sigma=0.301290 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9235 mas, bmaj=3.074 mas, bpa=-17.79 degrees ! Estimated noise=2.1854 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9235 x 3.074 at -17.79 degrees (North through East) ! Clean map min=-0.0086131 max=1.6877 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074827Jy sigma=0.301290 ! Fit after self-cal, rms=0.071467Jy sigma=0.279509 ! Inverting map and beam ! Estimated beam: bmin=0.9238 mas, bmaj=3.072 mas, bpa=-17.77 degrees ! Estimated noise=2.18401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0082923 Jy ! Component: 100 - total flux cleaned = -0.0108337 Jy ! Component: 150 - total flux cleaned = -0.0120629 Jy ! Component: 200 - total flux cleaned = -0.0125826 Jy ! Total flux subtracted in 200 components = -0.0125826 Jy ! Clean residual min=-0.007972 max=0.006584 Jy/beam ! Clean residual mean=-0.000005 rms=0.001654 Jy/beam ! Combined flux in latest and established models = 2.00246 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 182 components and 2.00246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070295Jy sigma=0.274752 ! Fit after self-cal, rms=0.070281Jy sigma=0.274677 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.41786e-05 Jy ! Component: 100 - total flux cleaned = -0.000419361 Jy ! Component: 150 - total flux cleaned = -0.000828487 Jy ! Component: 200 - total flux cleaned = -0.00111625 Jy ! Total flux subtracted in 200 components = -0.00111625 Jy ! Clean residual min=-0.007762 max=0.006399 Jy/beam ! Clean residual mean=-0.000005 rms=0.001629 Jy/beam ! Combined flux in latest and established models = 2.00134 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 194 components and 2.00135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070003Jy sigma=0.273462 ! Fit after self-cal, rms=0.069988Jy sigma=0.273418 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069988Jy sigma=0.273418 ! Fit after self-cal, rms=0.069459Jy sigma=0.271301 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7345 mas, bmaj=2.982 mas, bpa=-18.59 degrees ! Estimated noise=2.94897 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.29208 Jy ! Component: 100 - total flux cleaned = 1.59747 Jy ! Component: 150 - total flux cleaned = 1.72911 Jy ! Component: 200 - total flux cleaned = 1.79519 Jy ! Total flux subtracted in 200 components = 1.79519 Jy ! Clean residual min=-0.017092 max=0.031910 Jy/beam ! Clean residual mean=-0.000019 rms=0.004102 Jy/beam ! Combined flux in latest and established models = 1.79519 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.79519 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9238 mas, bmaj=3.071 mas, bpa=-17.76 degrees ! Estimated noise=2.18309 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.058935 Jy ! Component: 100 - total flux cleaned = 0.0955998 Jy ! Component: 150 - total flux cleaned = 0.120817 Jy ! Component: 200 - total flux cleaned = 0.139297 Jy ! Total flux subtracted in 200 components = 0.139297 Jy ! Clean residual min=-0.008797 max=0.011742 Jy/beam ! Clean residual mean=-0.000007 rms=0.002399 Jy/beam ! Combined flux in latest and established models = 1.93448 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 52 components and 1.93449 Jy ! Inverting map ! Added new window around map position (-7, 9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01477 Jy ! Component: 100 - total flux cleaned = 0.0268234 Jy ! Component: 150 - total flux cleaned = 0.0368932 Jy ! Component: 200 - total flux cleaned = 0.0454288 Jy ! Total flux subtracted in 200 components = 0.0454288 Jy ! Clean residual min=-0.007761 max=0.007221 Jy/beam ! Clean residual mean=-0.000004 rms=0.001807 Jy/beam ! Combined flux in latest and established models = 1.97991 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 85 components and 1.97991 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.098 mas, bmaj=3.217 mas, bpa=-12.03 degrees ! Estimated noise=2.80934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107284 Jy ! Component: 100 - total flux cleaned = 0.01555 Jy ! Component: 150 - total flux cleaned = 0.0164982 Jy ! Component: 200 - total flux cleaned = 0.0177559 Jy ! Total flux subtracted in 200 components = 0.0177559 Jy ! Clean residual min=-0.009463 max=0.007680 Jy/beam ! Clean residual mean=-0.000008 rms=0.002263 Jy/beam ! Combined flux in latest and established models = 1.99767 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109298 Jy ! Component: 100 - total flux cleaned = 0.00158138 Jy ! Component: 150 - total flux cleaned = 0.00188109 Jy ! Component: 200 - total flux cleaned = 0.00202067 Jy ! Total flux subtracted in 200 components = 0.00202067 Jy ! Clean residual min=-0.009277 max=0.007332 Jy/beam ! Clean residual mean=-0.000007 rms=0.002168 Jy/beam ! Combined flux in latest and established models = 1.99969 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 157 components and 1.99969 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9238 mas, bmaj=3.071 mas, bpa=-17.76 degrees ! Estimated noise=2.18309 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000700863 Jy ! Component: 100 - total flux cleaned = -0.000704448 Jy ! Component: 150 - total flux cleaned = -0.000712691 Jy ! Component: 200 - total flux cleaned = -0.000387626 Jy ! Total flux subtracted in 200 components = -0.000387626 Jy ! Clean residual min=-0.007619 max=0.006106 Jy/beam ! Clean residual mean=-0.000004 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 1.9993 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 181 components and 1.9993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069088Jy sigma=0.272065 ! Fit after self-cal, rms=0.068963Jy sigma=0.271333 wmodel J1751+0939_X_a_map.mod ! Writing 181 model components to file: J1751+0939_X_a_map.mod wobs J1751+0939_X_a_uvs.fits ! Writing UV FITS file: J1751+0939_X_a_uvs.fits wwins J1751+0939_X_a_map.win ! wwins: Wrote 5 windows to J1751+0939_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00314219 Jy ! Component: 100 - total flux cleaned = -0.00436675 Jy ! Component: 150 - total flux cleaned = -0.00569473 Jy ! Component: 200 - total flux cleaned = -0.00704628 Jy ! Component: 250 - total flux cleaned = -0.00824766 Jy ! Component: 300 - total flux cleaned = -0.00957828 Jy ! Component: 350 - total flux cleaned = -0.0104339 Jy ! Component: 400 - total flux cleaned = -0.0108494 Jy ! Component: 450 - total flux cleaned = -0.0113333 Jy ! Component: 500 - total flux cleaned = -0.0116473 Jy ! Component: 550 - total flux cleaned = -0.0118014 Jy ! Component: 600 - total flux cleaned = -0.0118032 Jy ! Component: 650 - total flux cleaned = -0.0118775 Jy ! Component: 700 - total flux cleaned = -0.0118062 Jy ! Component: 750 - total flux cleaned = -0.0118766 Jy ! Component: 800 - total flux cleaned = -0.0116678 Jy ! Component: 850 - total flux cleaned = -0.0116696 Jy ! Component: 900 - total flux cleaned = -0.0116027 Jy ! Component: 950 - total flux cleaned = -0.0114707 Jy ! Component: 1000 - total flux cleaned = -0.0110822 Jy ! Component: 1050 - total flux cleaned = -0.0109549 Jy ! Component: 1100 - total flux cleaned = -0.0106409 Jy ! Component: 1150 - total flux cleaned = -0.0103944 Jy ! Component: 1200 - total flux cleaned = -0.0100896 Jy ! Component: 1250 - total flux cleaned = -0.00984967 Jy ! Component: 1300 - total flux cleaned = -0.00961272 Jy ! Component: 1350 - total flux cleaned = -0.00932123 Jy ! Component: 1400 - total flux cleaned = -0.0086925 Jy ! Component: 1450 - total flux cleaned = -0.00869267 Jy ! Component: 1500 - total flux cleaned = -0.00835798 Jy ! Component: 1550 - total flux cleaned = -0.00808328 Jy ! Component: 1600 - total flux cleaned = -0.00775833 Jy ! Component: 1650 - total flux cleaned = -0.00770472 Jy ! Component: 1700 - total flux cleaned = -0.00733543 Jy ! Component: 1750 - total flux cleaned = -0.00707438 Jy ! Component: 1800 - total flux cleaned = -0.00661078 Jy ! Component: 1850 - total flux cleaned = -0.00630491 Jy ! Component: 1900 - total flux cleaned = -0.00620426 Jy ! Component: 1950 - total flux cleaned = -0.00565664 Jy ! Component: 2000 - total flux cleaned = -0.00545955 Jy ! Component: 2050 - total flux cleaned = -0.00507031 Jy ! Component: 2100 - total flux cleaned = -0.00463878 Jy ! Component: 2150 - total flux cleaned = -0.00454432 Jy ! Component: 2200 - total flux cleaned = -0.00430923 Jy ! Component: 2250 - total flux cleaned = -0.00393791 Jy ! Component: 2300 - total flux cleaned = -0.00375457 Jy ! Component: 2350 - total flux cleaned = -0.00361872 Jy ! Component: 2400 - total flux cleaned = -0.00352929 Jy ! Component: 2450 - total flux cleaned = -0.00326283 Jy ! Component: 2500 - total flux cleaned = -0.0031305 Jy ! Component: 2550 - total flux cleaned = -0.00286974 Jy ! Component: 2600 - total flux cleaned = -0.00282677 Jy ! Component: 2650 - total flux cleaned = -0.0027411 Jy ! Component: 2700 - total flux cleaned = -0.00248793 Jy ! Component: 2750 - total flux cleaned = -0.00248837 Jy ! Component: 2800 - total flux cleaned = -0.00248851 Jy ! Component: 2850 - total flux cleaned = -0.00252845 Jy ! Component: 2900 - total flux cleaned = -0.00224502 Jy ! Component: 2950 - total flux cleaned = -0.00220455 Jy ! Component: 3000 - total flux cleaned = -0.00212546 Jy ! Component: 3050 - total flux cleaned = -0.00216524 Jy ! Component: 3100 - total flux cleaned = -0.00212599 Jy ! Component: 3150 - total flux cleaned = -0.00204869 Jy ! Component: 3200 - total flux cleaned = -0.00204866 Jy ! Component: 3250 - total flux cleaned = -0.00197241 Jy ! Component: 3300 - total flux cleaned = -0.00197238 Jy ! Component: 3350 - total flux cleaned = -0.00189815 Jy ! Component: 3400 - total flux cleaned = -0.00178753 Jy ! Component: 3450 - total flux cleaned = -0.00193316 Jy ! Component: 3500 - total flux cleaned = -0.00171633 Jy ! Component: 3550 - total flux cleaned = -0.00168009 Jy ! Component: 3600 - total flux cleaned = -0.00189365 Jy ! Component: 3650 - total flux cleaned = -0.00164743 Jy ! Component: 3700 - total flux cleaned = -0.00154224 Jy ! Component: 3750 - total flux cleaned = -0.00157697 Jy ! Component: 3800 - total flux cleaned = -0.00133719 Jy ! Component: 3850 - total flux cleaned = -0.00147331 Jy ! Component: 3900 - total flux cleaned = -0.00143974 Jy ! Component: 3950 - total flux cleaned = -0.00133945 Jy ! Component: 4000 - total flux cleaned = -0.00143875 Jy ! Component: 4050 - total flux cleaned = -0.00147181 Jy ! Total flux subtracted in 4096 components = -0.0014715 Jy ! Clean residual min=-0.001709 max=0.001651 Jy/beam ! Clean residual mean=-0.000001 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 1.99783 Jy keep ! Adding 345 model components to the UV plane model. ! The established model now contains 526 components and 1.99783 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1751+0939_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9238 x 3.071 at -17.76 degrees (North through East) ! Clean map min=-0.0051994 max=1.6952 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1751+0939_X_a_map.fits wmodel /image_prod/ug002_uva//J1751+0939_X_a_map.mod ! Writing 526 model components to file: /image_prod/ug002_uva//J1751+0939_X_a_map.mod wobs /image_prod/ug002_uva//J1751+0939_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1751+0939_X_a_uvs.fits wwins /image_prod/ug002_uva//J1751+0939_X_a_map.win ! wwins: Wrote 6 windows to /image_prod/ug002_uva//J1751+0939_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.69518 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000626107 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.110803 0.110803 0.221607 0.443214 0.886427 1.77285 3.54571 7.09142 14.1828 28.3657 56.7313 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.695 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2707.5 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1751+0939_X_a_dfm.log closed on Thu Mar 5 03:28:42 2020