! Started logfile: /image_prod/ug002_uva//J1748-2335_S_dfm.log on Thu Mar  5 03:27:20 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1748-2335_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1748-2335_S_uva.fits
! AN table 1: 100 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.833333 visibilities/baseline/integration-bin.
! Found source: J1748-2335
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3750 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1748-2335_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001346Jy  sigma=7.218476
! Fit after  self-cal, rms=0.953520Jy  sigma=6.873733
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.793 mas, bmaj=26.62 mas, bpa=-4.304 degrees
! Estimated noise=3.56696 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, -0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0411156 Jy
! Component: 100  -  total flux cleaned = 0.0516545 Jy
! Total flux subtracted in 100 components = 0.0516545 Jy
! Clean residual min=-0.006164 max=0.006177 Jy/beam
! Clean residual mean=0.000020 rms=0.002989 Jy/beam
! Combined flux in latest and established models = 0.0516545 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0516545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065800Jy  sigma=0.428649
! Fit after  self-cal, rms=0.064484Jy  sigma=0.418331
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.507 mas, bmaj=26.34 mas, bpa=-3.353 degrees
! Estimated noise=1.64141 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00287674 Jy
! Component: 100  -  total flux cleaned = 0.00379358 Jy
! Component: 150  -  total flux cleaned = 0.00410984 Jy
! Component: 200  -  total flux cleaned = 0.00411427 Jy
! Total flux subtracted in 200 components = 0.00411427 Jy
! Clean residual min=-0.003076 max=0.002196 Jy/beam
! Clean residual mean=0.000005 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.0557688 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 53 components and 0.0557688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064314Jy  sigma=0.417484
! Fit after  self-cal, rms=0.064286Jy  sigma=0.417307
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.507 x 26.34 at -3.353 degrees (North through East)
! Clean map  min=-0.0031122  max=0.050381 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.03     KP        1.00     LA        1.01     
!   NL        1.01     OV        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.87     KP        1.06     LA        1.00     
!   NL        1.02     OV        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.02     KP        0.99     LA        0.95     
!   NL        0.96     OV        1.10     
! 
! 
! Fit before self-cal, rms=0.064286Jy  sigma=0.417307
! Fit after  self-cal, rms=0.062256Jy  sigma=0.416541
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.548 mas, bmaj=26.04 mas, bpa=-3.236 degrees
! Estimated noise=1.63011 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125248 Jy
! Component: 100  -  total flux cleaned = 0.00195226 Jy
! Component: 150  -  total flux cleaned = 0.00211912 Jy
! Component: 200  -  total flux cleaned = 0.00214024 Jy
! Total flux subtracted in 200 components = 0.00214024 Jy
! Clean residual min=-0.002720 max=0.002478 Jy/beam
! Clean residual mean=0.000003 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.057909 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 73 components and 0.057909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062218Jy  sigma=0.416376
! Fit after  self-cal, rms=0.062187Jy  sigma=0.416117
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062187Jy  sigma=0.416117
! Fit after  self-cal, rms=0.061775Jy  sigma=0.415058
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.542 mas, bmaj=25.98 mas, bpa=-3.25 degrees
! Estimated noise=1.6404 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130282 Jy
! Component: 100  -  total flux cleaned = 0.0017164 Jy
! Component: 150  -  total flux cleaned = 0.00178754 Jy
! Component: 200  -  total flux cleaned = 0.00171137 Jy
! Total flux subtracted in 200 components = 0.00171137 Jy
! Clean residual min=-0.001990 max=0.002130 Jy/beam
! Clean residual mean=-0.000000 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.0596204 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 86 components and 0.0596204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061741Jy  sigma=0.414848
! Fit after  self-cal, rms=0.061748Jy  sigma=0.414715
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000326875 Jy
! Component: 100  -  total flux cleaned = 0.000288754 Jy
! Component: 150  -  total flux cleaned = 0.000218009 Jy
! Component: 200  -  total flux cleaned = 0.000168703 Jy
! Total flux subtracted in 200 components = 0.000168703 Jy
! Clean residual min=-0.002049 max=0.002271 Jy/beam
! Clean residual mean=-0.000000 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.0597891 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 97 components and 0.0597891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061736Jy  sigma=0.414637
! Fit after  self-cal, rms=0.061723Jy  sigma=0.414562
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061723Jy  sigma=0.414562
! Fit after  self-cal, rms=0.061358Jy  sigma=0.414221
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.523 mas, bmaj=25.98 mas, bpa=-3.272 degrees
! Estimated noise=1.63326 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000983652 Jy
! Component: 100  -  total flux cleaned = 0.000983587 Jy
! Component: 150  -  total flux cleaned = 0.00100505 Jy
! Component: 200  -  total flux cleaned = 0.000988796 Jy
! Total flux subtracted in 200 components = 0.000988796 Jy
! Clean residual min=-0.001528 max=0.002037 Jy/beam
! Clean residual mean=-0.000003 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.0607779 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 115 components and 0.0607779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061336Jy  sigma=0.414091
! Fit after  self-cal, rms=0.061346Jy  sigma=0.414019
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00016482 Jy
! Component: 100  -  total flux cleaned = 8.25568e-05 Jy
! Component: 150  -  total flux cleaned = 8.26966e-06 Jy
! Component: 200  -  total flux cleaned = -6.29003e-05 Jy
! Total flux subtracted in 200 components = -6.29003e-05 Jy
! Clean residual min=-0.001605 max=0.002058 Jy/beam
! Clean residual mean=-0.000003 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.060715 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 123 components and 0.060715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061337Jy  sigma=0.413961
! Fit after  self-cal, rms=0.061337Jy  sigma=0.413951
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061337Jy  sigma=0.413951
! Fit after  self-cal, rms=0.061162Jy  sigma=0.413890
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.609 mas, bmaj=26.11 mas, bpa=-2.24 degrees
! Estimated noise=1.64759 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000779234 Jy
! Component: 100  -  total flux cleaned = 0.000882093 Jy
! Component: 150  -  total flux cleaned = 0.000915863 Jy
! Component: 200  -  total flux cleaned = 0.000871406 Jy
! Total flux subtracted in 200 components = 0.000871406 Jy
! Clean residual min=-0.001464 max=0.001905 Jy/beam
! Clean residual mean=-0.000003 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.0615864 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 133 components and 0.0615864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061147Jy  sigma=0.413814
! Fit after  self-cal, rms=0.061154Jy  sigma=0.413797
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000118305 Jy
! Component: 100  -  total flux cleaned = 5.94117e-05 Jy
! Component: 150  -  total flux cleaned = -9.80071e-06 Jy
! Component: 200  -  total flux cleaned = -6.28514e-05 Jy
! Total flux subtracted in 200 components = -6.28514e-05 Jy
! Clean residual min=-0.001485 max=0.001907 Jy/beam
! Clean residual mean=-0.000003 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.0615236 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 140 components and 0.0615236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061148Jy  sigma=0.413762
! Fit after  self-cal, rms=0.061146Jy  sigma=0.413757
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=8.501 mas, bmaj=26.01 mas, bpa=-3.316 degrees
! Estimated noise=1.62607 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.501 x 26.01 at -3.316 degrees (North through East)
! Clean map  min=-0.001558  max=0.049718 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.791 mas, bmaj=26.31 mas, bpa=-4.09 degrees
! Estimated noise=3.47195 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0411717 Jy
! Component: 100  -  total flux cleaned = 0.0521818 Jy
! Component: 150  -  total flux cleaned = 0.0550057 Jy
! Component: 200  -  total flux cleaned = 0.0562063 Jy
! Total flux subtracted in 200 components = 0.0562063 Jy
! Clean residual min=-0.005986 max=0.006218 Jy/beam
! Clean residual mean=0.000014 rms=0.002619 Jy/beam
! Combined flux in latest and established models = 0.0562063 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.0562063 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.501 mas, bmaj=26.01 mas, bpa=-3.316 degrees
! Estimated noise=1.62607 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8, 12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00480353 Jy
! Component: 100  -  total flux cleaned = 0.00541835 Jy
! Component: 150  -  total flux cleaned = 0.00581328 Jy
! Component: 200  -  total flux cleaned = 0.00582602 Jy
! Total flux subtracted in 200 components = 0.00582602 Jy
! Clean residual min=-0.001764 max=0.002166 Jy/beam
! Clean residual mean=-0.000002 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.0620323 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 68 components and 0.0620323 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.609 mas, bmaj=26.11 mas, bpa=-2.24 degrees
! Estimated noise=1.64759 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000357926 Jy
! Component: 100  -  total flux cleaned = 0.000140152 Jy
! Component: 150  -  total flux cleaned = 2.76712e-05 Jy
! Component: 200  -  total flux cleaned = -0.000136951 Jy
! Total flux subtracted in 200 components = -0.000136951 Jy
! Clean residual min=-0.001346 max=0.001797 Jy/beam
! Clean residual mean=-0.000001 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.0618954 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.28042e-06 Jy
! Component: 100  -  total flux cleaned = -0.00015376 Jy
! Component: 150  -  total flux cleaned = -0.000226856 Jy
! Component: 200  -  total flux cleaned = -0.000338194 Jy
! Total flux subtracted in 200 components = -0.000338194 Jy
! Clean residual min=-0.001317 max=0.001631 Jy/beam
! Clean residual mean=-0.000000 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.0615572 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 134 components and 0.0615572 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.501 mas, bmaj=26.01 mas, bpa=-3.316 degrees
! Estimated noise=1.62607 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000208438 Jy
! Component: 100  -  total flux cleaned = -0.000291012 Jy
! Component: 150  -  total flux cleaned = -0.00040465 Jy
! Component: 200  -  total flux cleaned = -0.000491634 Jy
! Total flux subtracted in 200 components = -0.000491634 Jy
! Clean residual min=-0.001338 max=0.001571 Jy/beam
! Clean residual mean=-0.000001 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.0610656 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 158 components and 0.0610656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061117Jy  sigma=0.413520
! Fit after  self-cal, rms=0.061119Jy  sigma=0.413461
wmodel J1748-2335_S_map.mod
! Writing 158 model components to file: J1748-2335_S_map.mod
wobs   J1748-2335_S_uvs.fits
! Writing UV FITS file: J1748-2335_S_uvs.fits
wwins  J1748-2335_S_map.win
! wwins: Wrote 2 windows to J1748-2335_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000524111 Jy
! Component: 100  -  total flux cleaned = 0.000482278 Jy
! Component: 150  -  total flux cleaned = 0.000420387 Jy
! Component: 200  -  total flux cleaned = 0.000362323 Jy
! Component: 250  -  total flux cleaned = 0.000288335 Jy
! Component: 300  -  total flux cleaned = 0.000271081 Jy
! Component: 350  -  total flux cleaned = 0.000253981 Jy
! Component: 400  -  total flux cleaned = 0.00023734 Jy
! Component: 450  -  total flux cleaned = 0.000237024 Jy
! Component: 500  -  total flux cleaned = 0.000207081 Jy
! Component: 550  -  total flux cleaned = 0.000192792 Jy
! Component: 600  -  total flux cleaned = 0.000178728 Jy
! Component: 650  -  total flux cleaned = 0.00016502 Jy
! Component: 700  -  total flux cleaned = 8.63958e-05 Jy
! Component: 750  -  total flux cleaned = 6.13245e-05 Jy
! Component: 800  -  total flux cleaned = 4.91026e-05 Jy
! Component: 850  -  total flux cleaned = 3.71183e-05 Jy
! Component: 900  -  total flux cleaned = -3.37325e-05 Jy
! Component: 950  -  total flux cleaned = -0.000114575 Jy
! Component: 1000  -  total flux cleaned = -0.000193643 Jy
! Component: 1050  -  total flux cleaned = -0.000259987 Jy
! Component: 1100  -  total flux cleaned = -0.000325318 Jy
! Component: 1150  -  total flux cleaned = -0.00041072 Jy
! Component: 1200  -  total flux cleaned = -0.000494626 Jy
! Component: 1250  -  total flux cleaned = -0.000587377 Jy
! Component: 1300  -  total flux cleaned = -0.000709164 Jy
! Component: 1350  -  total flux cleaned = -0.000819467 Jy
! Component: 1400  -  total flux cleaned = -0.000898723 Jy
! Component: 1450  -  total flux cleaned = -0.000986942 Jy
! Component: 1500  -  total flux cleaned = -0.00104514 Jy
! Component: 1550  -  total flux cleaned = -0.00110282 Jy
! Component: 1600  -  total flux cleaned = -0.00115991 Jy
! Component: 1650  -  total flux cleaned = -0.00120704 Jy
! Component: 1700  -  total flux cleaned = -0.00126309 Jy
! Component: 1750  -  total flux cleaned = -0.00132788 Jy
! Component: 1800  -  total flux cleaned = -0.00137378 Jy
! Component: 1850  -  total flux cleaned = -0.00141033 Jy
! Component: 1900  -  total flux cleaned = -0.00144658 Jy
! Component: 1950  -  total flux cleaned = -0.00147354 Jy
! Component: 2000  -  total flux cleaned = -0.00150922 Jy
! Component: 2050  -  total flux cleaned = -0.00151806 Jy
! Component: 2100  -  total flux cleaned = -0.00152688 Jy
! Component: 2150  -  total flux cleaned = -0.00152691 Jy
! Component: 2200  -  total flux cleaned = -0.00152693 Jy
! Component: 2250  -  total flux cleaned = -0.00152682 Jy
! Component: 2300  -  total flux cleaned = -0.00150943 Jy
! Component: 2350  -  total flux cleaned = -0.00150943 Jy
! Component: 2400  -  total flux cleaned = -0.00149212 Jy
! Component: 2450  -  total flux cleaned = -0.0014835 Jy
! Component: 2500  -  total flux cleaned = -0.00145785 Jy
! Component: 2550  -  total flux cleaned = -0.00144082 Jy
! Component: 2600  -  total flux cleaned = -0.00143235 Jy
! Component: 2650  -  total flux cleaned = -0.00140702 Jy
! Component: 2700  -  total flux cleaned = -0.00141543 Jy
! Component: 2750  -  total flux cleaned = -0.0013902 Jy
! Component: 2800  -  total flux cleaned = -0.00137342 Jy
! Component: 2850  -  total flux cleaned = -0.0013734 Jy
! Component: 2900  -  total flux cleaned = -0.00135668 Jy
! Component: 2950  -  total flux cleaned = -0.00136506 Jy
! Component: 3000  -  total flux cleaned = -0.00136504 Jy
! Component: 3050  -  total flux cleaned = -0.00136503 Jy
! Component: 3100  -  total flux cleaned = -0.00137346 Jy
! Component: 3150  -  total flux cleaned = -0.00138185 Jy
! Component: 3200  -  total flux cleaned = -0.00136499 Jy
! Component: 3250  -  total flux cleaned = -0.00138187 Jy
! Component: 3300  -  total flux cleaned = -0.00138184 Jy
! Component: 3350  -  total flux cleaned = -0.00139032 Jy
! Component: 3400  -  total flux cleaned = -0.00139031 Jy
! Component: 3450  -  total flux cleaned = -0.00139883 Jy
! Component: 3500  -  total flux cleaned = -0.00140737 Jy
! Component: 3550  -  total flux cleaned = -0.00139014 Jy
! Component: 3600  -  total flux cleaned = -0.00141602 Jy
! Component: 3650  -  total flux cleaned = -0.00140733 Jy
! Component: 3700  -  total flux cleaned = -0.00141608 Jy
! Component: 3750  -  total flux cleaned = -0.00140732 Jy
! Component: 3800  -  total flux cleaned = -0.00141608 Jy
! Component: 3850  -  total flux cleaned = -0.00140731 Jy
! Component: 3900  -  total flux cleaned = -0.00141608 Jy
! Component: 3950  -  total flux cleaned = -0.0014161 Jy
! Component: 4000  -  total flux cleaned = -0.0013893 Jy
! Component: 4050  -  total flux cleaned = -0.00139818 Jy
! Total flux subtracted in 4096 components = -0.00138019 Jy
! Clean residual min=-0.000566 max=0.000539 Jy/beam
! Clean residual mean=-0.000001 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.0596854 Jy
keep
! Adding 248 model components to the UV plane model.
! The established model now contains 406 components and 0.0596854 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1748-2335_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.501 x 26.01 at -3.316 degrees (North through East)
! Clean map  min=-0.0016637  max=0.049773 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1748-2335_S_map.fits
wmodel /image_prod/ug002_uva//J1748-2335_S_map.mod
! Writing 406 model components to file: /image_prod/ug002_uva//J1748-2335_S_map.mod
wobs   /image_prod/ug002_uva//J1748-2335_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1748-2335_S_uvs.fits
wwins  /image_prod/ug002_uva//J1748-2335_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1748-2335_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0497727 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000168122 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.01334 1.01334 2.02667 4.05335 8.1067 16.2134 32.4268 64.8536
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.049 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  296.051 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1748-2335_S_dfm.log closed on Thu Mar  5 03:27:24 2020