! Started logfile: /image_prod/ug002_uva//J1743-0350_X_h_dfm.log on Thu Mar 5 03:23:37 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1743-0350_X_h_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1743-0350_X_h_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.798413 visibilities/baseline/integration-bin. ! Found source: J1743-0350 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 18108 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1743-0350_X_h] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=3.064319Jy sigma=8.013183 ! Fit after self-cal, rms=1.941013Jy sigma=4.915479 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6291 mas, bmaj=1.648 mas, bpa=-2.211 degrees ! Estimated noise=2.78099 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.02584 Jy ! Component: 100 - total flux cleaned = 2.57382 Jy ! Total flux subtracted in 100 components = 2.57382 Jy ! Clean residual min=-0.115095 max=0.237073 Jy/beam ! Clean residual mean=-0.000034 rms=0.017042 Jy/beam ! Combined flux in latest and established models = 2.57382 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 2.57382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.629063Jy sigma=1.589234 ! Fit after self-cal, rms=0.627951Jy sigma=1.586783 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.252355 Jy ! Component: 100 - total flux cleaned = 0.37741 Jy ! Total flux subtracted in 100 components = 0.37741 Jy ! Clean residual min=-0.089308 max=0.118794 Jy/beam ! Clean residual mean=-0.000007 rms=0.013932 Jy/beam ! Combined flux in latest and established models = 2.95123 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 2.95123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.454419Jy sigma=1.236359 ! Fit after self-cal, rms=0.453467Jy sigma=1.233803 ! Inverting map ! Added new window around map position (2, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115669 Jy ! Component: 100 - total flux cleaned = 0.192826 Jy ! Total flux subtracted in 100 components = 0.192826 Jy ! Clean residual min=-0.081448 max=0.108156 Jy/beam ! Clean residual mean=-0.000004 rms=0.012934 Jy/beam ! Combined flux in latest and established models = 3.14406 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 3.14406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.411144Jy sigma=1.137617 ! Fit after self-cal, rms=0.408236Jy sigma=1.129980 ! Inverting map ! Added new window around map position (-2, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0829102 Jy ! Component: 100 - total flux cleaned = 0.127013 Jy ! Total flux subtracted in 100 components = 0.127013 Jy ! Clean residual min=-0.070668 max=0.068943 Jy/beam ! Clean residual mean=-0.000006 rms=0.011982 Jy/beam ! Combined flux in latest and established models = 3.27107 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 3.27107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.380632Jy sigma=1.053302 ! Fit after self-cal, rms=0.379743Jy sigma=1.051215 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7834 mas, bmaj=1.929 mas, bpa=-2.7 degrees ! Estimated noise=2.04763 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0797158 Jy ! Component: 100 - total flux cleaned = 0.10775 Jy ! Component: 150 - total flux cleaned = 0.125026 Jy ! Component: 200 - total flux cleaned = 0.141691 Jy ! Total flux subtracted in 200 components = 0.141691 Jy ! Clean residual min=-0.065579 max=0.062476 Jy/beam ! Clean residual mean=0.000025 rms=0.012766 Jy/beam ! Combined flux in latest and established models = 3.41276 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 49 components and 3.41276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.355074Jy sigma=0.981708 ! Fit after self-cal, rms=0.354286Jy sigma=0.979530 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7834 x 1.929 at -2.7 degrees (North through East) ! Clean map min=-0.060873 max=2.6895 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.85 KP 1.05 ! LA 1.04 MK 1.04 NL 1.16 OV 0.92 ! PT 0.93 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.84 KP 1.05 ! LA 1.04 MK 1.05 NL 1.16 OV 0.93 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.85 KP 1.06 ! LA 1.04 MK 1.05 NL 1.18 OV 0.91 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.87 KP 1.05 ! LA 1.05 MK 1.04 NL 1.16 OV 0.91 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.85 KP 1.06 ! LA 1.03 MK 1.05 NL 1.16 OV 0.92 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.84 KP 1.04 ! LA 1.03 MK 1.04 NL 1.22 OV 0.93 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.85 KP 1.05 ! LA 1.03 MK 1.06 NL 1.18 OV 0.91 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.87 KP 1.04 ! LA 1.04 MK 1.04 NL 1.17 OV 0.91 ! PT 0.93 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.87 KP 1.05 ! LA 1.04 MK 1.03 NL 1.19 OV 0.92 ! PT 0.93 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.87 KP 1.05 ! LA 1.04 MK 1.02 NL 1.17 OV 0.92 ! PT 0.93 SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.86 KP 1.05 ! LA 1.02 MK 1.02 NL 1.19 OV 0.92 ! PT 0.93 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.85 KP 1.05 ! LA 1.04 MK 1.04 NL 1.20 OV 0.90 ! PT 0.92 SC 1.04 ! ! ! Fit before self-cal, rms=0.354286Jy sigma=0.979530 ! Fit after self-cal, rms=0.205650Jy sigma=0.528651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7888 mas, bmaj=1.942 mas, bpa=-2.633 degrees ! Estimated noise=2.06194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.054057 Jy ! Component: 100 - total flux cleaned = -0.0668397 Jy ! Component: 150 - total flux cleaned = -0.066887 Jy ! Component: 200 - total flux cleaned = -0.0688182 Jy ! Total flux subtracted in 200 components = -0.0688182 Jy ! Clean residual min=-0.024748 max=0.027723 Jy/beam ! Clean residual mean=0.000057 rms=0.005849 Jy/beam ! Combined flux in latest and established models = 3.34394 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 3.34394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.183718Jy sigma=0.483739 ! Fit after self-cal, rms=0.183411Jy sigma=0.482884 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.183411Jy sigma=0.482884 ! Fit after self-cal, rms=0.179373Jy sigma=0.426852 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7898 mas, bmaj=1.944 mas, bpa=-2.5 degrees ! Estimated noise=2.06441 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0366822 Jy ! Component: 100 - total flux cleaned = -0.0468275 Jy ! Component: 150 - total flux cleaned = -0.0533816 Jy ! Component: 200 - total flux cleaned = -0.0601712 Jy ! Total flux subtracted in 200 components = -0.0601712 Jy ! Clean residual min=-0.021266 max=0.022024 Jy/beam ! Clean residual mean=0.000042 rms=0.004597 Jy/beam ! Combined flux in latest and established models = 3.28377 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 66 components and 3.28377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165970Jy sigma=0.400976 ! Fit after self-cal, rms=0.165851Jy sigma=0.400649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11, 13.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198264 Jy ! Component: 100 - total flux cleaned = 0.021639 Jy ! Component: 150 - total flux cleaned = 0.0216161 Jy ! Component: 200 - total flux cleaned = 0.0211682 Jy ! Total flux subtracted in 200 components = 0.0211682 Jy ! Clean residual min=-0.018126 max=0.021061 Jy/beam ! Clean residual mean=0.000041 rms=0.004401 Jy/beam ! Combined flux in latest and established models = 3.30494 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 90 components and 3.30494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.160811Jy sigma=0.389736 ! Fit after self-cal, rms=0.160483Jy sigma=0.388807 ! Inverting map ! Added new window around map position (-11.2, -13.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126542 Jy ! Component: 100 - total flux cleaned = 0.0177906 Jy ! Component: 150 - total flux cleaned = 0.0195365 Jy ! Component: 200 - total flux cleaned = 0.0207189 Jy ! Total flux subtracted in 200 components = 0.0207189 Jy ! Clean residual min=-0.017761 max=0.017709 Jy/beam ! Clean residual mean=0.000040 rms=0.004257 Jy/beam ! Combined flux in latest and established models = 3.32566 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 108 components and 3.32566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.156865Jy sigma=0.381452 ! Fit after self-cal, rms=0.156742Jy sigma=0.380938 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.156742Jy sigma=0.380938 ! Fit after self-cal, rms=0.093756Jy sigma=0.244049 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.789 mas, bmaj=1.943 mas, bpa=-2.476 degrees ! Estimated noise=2.06204 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0161392 Jy ! Component: 100 - total flux cleaned = -0.0233342 Jy ! Component: 150 - total flux cleaned = -0.0267074 Jy ! Component: 200 - total flux cleaned = -0.0286402 Jy ! Total flux subtracted in 200 components = -0.0286402 Jy ! Clean residual min=-0.010341 max=0.009374 Jy/beam ! Clean residual mean=0.000003 rms=0.001842 Jy/beam ! Combined flux in latest and established models = 3.29702 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 115 components and 3.29702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089835Jy sigma=0.233016 ! Fit after self-cal, rms=0.089791Jy sigma=0.232790 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00250449 Jy ! Component: 100 - total flux cleaned = -0.0044702 Jy ! Component: 150 - total flux cleaned = -0.00603134 Jy ! Component: 200 - total flux cleaned = -0.00676518 Jy ! Total flux subtracted in 200 components = -0.00676518 Jy ! Clean residual min=-0.009562 max=0.008876 Jy/beam ! Clean residual mean=0.000002 rms=0.001769 Jy/beam ! Combined flux in latest and established models = 3.29025 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 118 components and 3.29025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088354Jy sigma=0.228753 ! Fit after self-cal, rms=0.088345Jy sigma=0.228623 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088345Jy sigma=0.228623 ! Fit after self-cal, rms=0.086338Jy sigma=0.225315 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.099 mas, bmaj=3.376 mas, bpa=3.293 degrees ! Estimated noise=3.01666 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0139039 Jy ! Component: 100 - total flux cleaned = -0.0224998 Jy ! Component: 150 - total flux cleaned = -0.0277317 Jy ! Component: 200 - total flux cleaned = -0.0309839 Jy ! Total flux subtracted in 200 components = -0.0309839 Jy ! Clean residual min=-0.009446 max=0.009613 Jy/beam ! Clean residual mean=-0.000002 rms=0.002375 Jy/beam ! Combined flux in latest and established models = 3.25927 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 137 components and 3.25927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084903Jy sigma=0.223061 ! Fit after self-cal, rms=0.084803Jy sigma=0.222609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00331945 Jy ! Component: 100 - total flux cleaned = -0.00598111 Jy ! Component: 150 - total flux cleaned = -0.00801532 Jy ! Component: 200 - total flux cleaned = -0.00942085 Jy ! Total flux subtracted in 200 components = -0.00942085 Jy ! Clean residual min=-0.009236 max=0.009281 Jy/beam ! Clean residual mean=-0.000003 rms=0.002285 Jy/beam ! Combined flux in latest and established models = 3.24985 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 152 components and 3.24985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084512Jy sigma=0.222092 ! Fit after self-cal, rms=0.084511Jy sigma=0.222026 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7885 mas, bmaj=1.943 mas, bpa=-2.459 degrees ! Estimated noise=2.06098 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7885 x 1.943 at -2.459 degrees (North through East) ! Clean map min=-0.018152 max=2.7178 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084511Jy sigma=0.222026 ! Fit after self-cal, rms=0.078001Jy sigma=0.198211 ! Inverting map and beam ! Estimated beam: bmin=0.7882 mas, bmaj=1.943 mas, bpa=-2.467 degrees ! Estimated noise=2.05949 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00834288 Jy ! Component: 100 - total flux cleaned = -0.00923211 Jy ! Component: 150 - total flux cleaned = -0.00922687 Jy ! Component: 200 - total flux cleaned = -0.00922208 Jy ! Total flux subtracted in 200 components = -0.00922208 Jy ! Clean residual min=-0.006841 max=0.008602 Jy/beam ! Clean residual mean=0.000000 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 3.24063 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 153 components and 3.24063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076218Jy sigma=0.192364 ! Fit after self-cal, rms=0.076182Jy sigma=0.192216 ! Inverting map ! Added new window around map position (1.2, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350252 Jy ! Component: 100 - total flux cleaned = 0.00374186 Jy ! Component: 150 - total flux cleaned = 0.00352621 Jy ! Component: 200 - total flux cleaned = 0.00251575 Jy ! Total flux subtracted in 200 components = 0.00251575 Jy ! Clean residual min=-0.006825 max=0.006540 Jy/beam ! Clean residual mean=0.000001 rms=0.001325 Jy/beam ! Combined flux in latest and established models = 3.24314 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 167 components and 3.24314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074761Jy sigma=0.187727 ! Fit after self-cal, rms=0.074712Jy sigma=0.187608 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074712Jy sigma=0.187608 ! Fit after self-cal, rms=0.073711Jy sigma=0.186226 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6314 mas, bmaj=1.655 mas, bpa=-2.091 degrees ! Estimated noise=2.80439 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.04181 Jy ! Component: 100 - total flux cleaned = 2.58882 Jy ! Component: 150 - total flux cleaned = 2.83905 Jy ! Component: 200 - total flux cleaned = 2.95991 Jy ! Total flux subtracted in 200 components = 2.95991 Jy ! Clean residual min=-0.032631 max=0.058835 Jy/beam ! Clean residual mean=-0.000013 rms=0.003892 Jy/beam ! Combined flux in latest and established models = 2.95991 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 2.95991 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7879 mas, bmaj=1.943 mas, bpa=-2.457 degrees ! Estimated noise=2.0592 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0952828 Jy ! Component: 100 - total flux cleaned = 0.14414 Jy ! Component: 150 - total flux cleaned = 0.174568 Jy ! Component: 200 - total flux cleaned = 0.196481 Jy ! Total flux subtracted in 200 components = 0.196481 Jy ! Clean residual min=-0.009903 max=0.016019 Jy/beam ! Clean residual mean=-0.000011 rms=0.001828 Jy/beam ! Combined flux in latest and established models = 3.15639 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 37 components and 3.15639 Jy ! Inverting map ! Added new window around map position (-0.6, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172406 Jy ! Component: 100 - total flux cleaned = 0.0292346 Jy ! Component: 150 - total flux cleaned = 0.0353373 Jy ! Component: 200 - total flux cleaned = 0.0391491 Jy ! Total flux subtracted in 200 components = 0.0391491 Jy ! Clean residual min=-0.008436 max=0.007195 Jy/beam ! Clean residual mean=-0.000002 rms=0.001413 Jy/beam ! Combined flux in latest and established models = 3.19554 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 61 components and 3.19554 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.099 mas, bmaj=3.376 mas, bpa=3.349 degrees ! Estimated noise=3.01555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00678138 Jy ! Component: 100 - total flux cleaned = 0.0113743 Jy ! Component: 150 - total flux cleaned = 0.0143231 Jy ! Component: 200 - total flux cleaned = 0.0157951 Jy ! Total flux subtracted in 200 components = 0.0157951 Jy ! Clean residual min=-0.008908 max=0.008542 Jy/beam ! Clean residual mean=-0.000005 rms=0.001941 Jy/beam ! Combined flux in latest and established models = 3.21134 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110675 Jy ! Component: 100 - total flux cleaned = 0.001935 Jy ! Component: 150 - total flux cleaned = 0.00238698 Jy ! Component: 200 - total flux cleaned = 0.0028015 Jy ! Total flux subtracted in 200 components = 0.0028015 Jy ! Clean residual min=-0.008710 max=0.008072 Jy/beam ! Clean residual mean=-0.000005 rms=0.001869 Jy/beam ! Combined flux in latest and established models = 3.21414 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 117 components and 3.21414 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7879 mas, bmaj=1.943 mas, bpa=-2.457 degrees ! Estimated noise=2.0592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117646 Jy ! Component: 100 - total flux cleaned = -0.000884264 Jy ! Component: 150 - total flux cleaned = -0.000130679 Jy ! Component: 200 - total flux cleaned = 0.000553479 Jy ! Total flux subtracted in 200 components = 0.000553479 Jy ! Clean residual min=-0.006151 max=0.006734 Jy/beam ! Clean residual mean=-0.000002 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 3.21469 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 130 components and 3.21469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072433Jy sigma=0.183323 ! Fit after self-cal, rms=0.071682Jy sigma=0.180414 wmodel J1743-0350_X_h_map.mod ! Writing 130 model components to file: J1743-0350_X_h_map.mod wobs J1743-0350_X_h_uvs.fits ! Writing UV FITS file: J1743-0350_X_h_uvs.fits wwins J1743-0350_X_h_map.win ! wwins: Wrote 8 windows to J1743-0350_X_h_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000573337 Jy ! Component: 100 - total flux cleaned = 0.000976741 Jy ! Component: 150 - total flux cleaned = 0.00107348 Jy ! Component: 200 - total flux cleaned = 0.00034532 Jy ! Component: 250 - total flux cleaned = -0.000358389 Jy ! Component: 300 - total flux cleaned = -0.00069658 Jy ! Component: 350 - total flux cleaned = -0.000945142 Jy ! Component: 400 - total flux cleaned = -0.00110747 Jy ! Component: 450 - total flux cleaned = -0.00158355 Jy ! Component: 500 - total flux cleaned = -0.00181609 Jy ! Component: 550 - total flux cleaned = -0.00196964 Jy ! Component: 600 - total flux cleaned = -0.00234732 Jy ! Component: 650 - total flux cleaned = -0.00264331 Jy ! Component: 700 - total flux cleaned = -0.00278907 Jy ! Component: 750 - total flux cleaned = -0.00293232 Jy ! Component: 800 - total flux cleaned = -0.00300418 Jy ! Component: 850 - total flux cleaned = -0.00335041 Jy ! Component: 900 - total flux cleaned = -0.0031442 Jy ! Component: 950 - total flux cleaned = -0.00321234 Jy ! Component: 1000 - total flux cleaned = -0.00334732 Jy ! Component: 1050 - total flux cleaned = -0.00361213 Jy ! Component: 1100 - total flux cleaned = -0.00380734 Jy ! Component: 1150 - total flux cleaned = -0.00393566 Jy ! Component: 1200 - total flux cleaned = -0.00412514 Jy ! Component: 1250 - total flux cleaned = -0.00443807 Jy ! Component: 1300 - total flux cleaned = -0.00437587 Jy ! Component: 1350 - total flux cleaned = -0.00462158 Jy ! Component: 1400 - total flux cleaned = -0.00474322 Jy ! Component: 1450 - total flux cleaned = -0.00474416 Jy ! Component: 1500 - total flux cleaned = -0.00486376 Jy ! Component: 1550 - total flux cleaned = -0.00515619 Jy ! Component: 1600 - total flux cleaned = -0.00480855 Jy ! Component: 1650 - total flux cleaned = -0.00498235 Jy ! Component: 1700 - total flux cleaned = -0.00509615 Jy ! Component: 1750 - total flux cleaned = -0.00492858 Jy ! Component: 1800 - total flux cleaned = -0.00520718 Jy ! Component: 1850 - total flux cleaned = -0.00498762 Jy ! Component: 1900 - total flux cleaned = -0.00526016 Jy ! Component: 1950 - total flux cleaned = -0.00515297 Jy ! Component: 2000 - total flux cleaned = -0.00531277 Jy ! Component: 2050 - total flux cleaned = -0.00547055 Jy ! Component: 2100 - total flux cleaned = -0.0053133 Jy ! Component: 2150 - total flux cleaned = -0.00562489 Jy ! Component: 2200 - total flux cleaned = -0.00547066 Jy ! Component: 2250 - total flux cleaned = -0.00552165 Jy ! Component: 2300 - total flux cleaned = -0.00562313 Jy ! Component: 2350 - total flux cleaned = -0.00567346 Jy ! Component: 2400 - total flux cleaned = -0.00587213 Jy ! Component: 2450 - total flux cleaned = -0.00587272 Jy ! Component: 2500 - total flux cleaned = -0.00592204 Jy ! Component: 2550 - total flux cleaned = -0.0062123 Jy ! Component: 2600 - total flux cleaned = -0.00625986 Jy ! Component: 2650 - total flux cleaned = -0.00621315 Jy ! Component: 2700 - total flux cleaned = -0.00635608 Jy ! Component: 2750 - total flux cleaned = -0.00630947 Jy ! Component: 2800 - total flux cleaned = -0.00659054 Jy ! Component: 2850 - total flux cleaned = -0.00654434 Jy ! Component: 2900 - total flux cleaned = -0.00672849 Jy ! Component: 2950 - total flux cleaned = -0.00672818 Jy ! Component: 3000 - total flux cleaned = -0.00690988 Jy ! Component: 3050 - total flux cleaned = -0.00681955 Jy ! Component: 3100 - total flux cleaned = -0.00681923 Jy ! Component: 3150 - total flux cleaned = -0.0070864 Jy ! Component: 3200 - total flux cleaned = -0.00704209 Jy ! Component: 3250 - total flux cleaned = -0.00708593 Jy ! Component: 3300 - total flux cleaned = -0.00743391 Jy ! Component: 3350 - total flux cleaned = -0.00734749 Jy ! Component: 3400 - total flux cleaned = -0.00751978 Jy ! Component: 3450 - total flux cleaned = -0.00760523 Jy ! Component: 3500 - total flux cleaned = -0.0077323 Jy ! Component: 3550 - total flux cleaned = -0.00773269 Jy ! Component: 3600 - total flux cleaned = -0.00798397 Jy ! Component: 3650 - total flux cleaned = -0.00819214 Jy ! Component: 3700 - total flux cleaned = -0.00782007 Jy ! Component: 3750 - total flux cleaned = -0.00814956 Jy ! Component: 3800 - total flux cleaned = -0.00831317 Jy ! Component: 3850 - total flux cleaned = -0.00847566 Jy ! Component: 3900 - total flux cleaned = -0.00859618 Jy ! Component: 3950 - total flux cleaned = -0.00863638 Jy ! Component: 4000 - total flux cleaned = -0.00875576 Jy ! Component: 4050 - total flux cleaned = -0.00895373 Jy ! Total flux subtracted in 4096 components = -0.00911127 Jy ! Clean residual min=-0.001970 max=0.002218 Jy/beam ! Clean residual mean=-0.000003 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 3.20558 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 432 components and 3.20558 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1743-0350_X_h_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7879 x 1.943 at -2.457 degrees (North through East) ! Clean map min=-0.0063015 max=2.7347 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1743-0350_X_h_map.fits wmodel /image_prod/ug002_uva//J1743-0350_X_h_map.mod ! Writing 432 model components to file: /image_prod/ug002_uva//J1743-0350_X_h_map.mod wobs /image_prod/ug002_uva//J1743-0350_X_h_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1743-0350_X_h_uvs.fits wwins /image_prod/ug002_uva//J1743-0350_X_h_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J1743-0350_X_h_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 2.73474 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000687349 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0754019 0.0754019 0.150804 0.301608 0.603215 1.20643 2.41286 4.82572 9.65144 19.3029 38.6058 77.2116 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.734 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3978.68 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1743-0350_X_h_dfm.log closed on Thu Mar 5 03:23:42 2020