! Started logfile: /image_prod/ug002_uva//J1743-0350_S_h_dfm.log on Thu Mar  5 03:22:54 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1743-0350_S_h_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1743-0350_S_h_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.798413 visibilities/baseline/integration-bin.
! Found source: J1743-0350
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4527 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1743-0350_S_h]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.857955Jy  sigma=7.449718
! Fit after  self-cal, rms=1.740209Jy  sigma=4.404104
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.73 mas, bmaj=6.661 mas, bpa=-2.464 degrees
! Estimated noise=4.8278 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.8575 Jy
! Component: 100  -  total flux cleaned = 2.27623 Jy
! Total flux subtracted in 100 components = 2.27623 Jy
! Clean residual min=-0.117853 max=0.443137 Jy/beam
! Clean residual mean=-0.000005 rms=0.035635 Jy/beam
! Combined flux in latest and established models = 2.27623 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 2.27623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.815806Jy  sigma=2.464865
! Fit after  self-cal, rms=0.815789Jy  sigma=2.464839
! Inverting map 
! Added new window around map position (-3, 9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.351373 Jy
! Component: 100  -  total flux cleaned = 0.484855 Jy
! Total flux subtracted in 100 components = 0.484855 Jy
! Clean residual min=-0.132447 max=0.314930 Jy/beam
! Clean residual mean=0.000027 rms=0.028101 Jy/beam
! Combined flux in latest and established models = 2.76109 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 17 components and 2.76109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.680173Jy  sigma=1.993358
! Fit after  self-cal, rms=0.657974Jy  sigma=1.939771
! Inverting map 
! Added new window around map position (2.5, -10).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.207628 Jy
! Component: 100  -  total flux cleaned = 0.302604 Jy
! Total flux subtracted in 100 components = 0.302604 Jy
! Clean residual min=-0.140331 max=0.114671 Jy/beam
! Clean residual mean=0.000044 rms=0.023498 Jy/beam
! Combined flux in latest and established models = 3.06369 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 28 components and 3.06369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.620824Jy  sigma=1.703135
! Fit after  self-cal, rms=0.618130Jy  sigma=1.696901
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.283 mas, bmaj=7.621 mas, bpa=-1.732 degrees
! Estimated noise=4.01575 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7, 16.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0859125 Jy
! Component: 100  -  total flux cleaned = 0.0981588 Jy
! Component: 150  -  total flux cleaned = 0.0981536 Jy
! Component: 200  -  total flux cleaned = 0.10029 Jy
! Total flux subtracted in 200 components = 0.10029 Jy
! Clean residual min=-0.094255 max=0.123818 Jy/beam
! Clean residual mean=0.000080 rms=0.021758 Jy/beam
! Combined flux in latest and established models = 3.16398 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 50 components and 3.16398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.602581Jy  sigma=1.570936
! Fit after  self-cal, rms=0.600228Jy  sigma=1.565097
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.283 x 7.621 at -1.732 degrees (North through East)
! Clean map  min=-0.10307  max=2.2119 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.21     FD        0.90     HN        0.96     KP        1.00     
!   LA        1.02     MK        1.04     NL        0.96     OV        0.91     
!   PT        1.03     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.89     FD        0.88     HN        0.98     KP        1.00     
!   LA        1.02     MK        1.04     NL        1.09     OV        0.91     
!   PT        1.04     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.37     FD        0.89     HN        0.98     KP        0.99     
!   LA        1.01     MK        1.03     NL        1.07     OV        0.92     
!   PT        1.03     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.600228Jy  sigma=1.565097
! Fit after  self-cal, rms=0.744971Jy  sigma=1.225640
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.271 mas, bmaj=7.846 mas, bpa=-2.081 degrees
! Estimated noise=4.27416 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.017509 Jy
! Component: 100  -  total flux cleaned = -0.0297272 Jy
! Component: 150  -  total flux cleaned = -0.0394617 Jy
! Component: 200  -  total flux cleaned = -0.0496074 Jy
! Total flux subtracted in 200 components = -0.0496074 Jy
! Clean residual min=-0.064490 max=0.061980 Jy/beam
! Clean residual mean=0.000035 rms=0.017594 Jy/beam
! Combined flux in latest and established models = 3.11437 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 70 components and 3.11437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.711837Jy  sigma=1.209422
! Fit after  self-cal, rms=0.711079Jy  sigma=1.207186
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.711079Jy  sigma=1.207186
! Fit after  self-cal, rms=0.999564Jy  sigma=1.113522
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.246 mas, bmaj=7.924 mas, bpa=-2.328 degrees
! Estimated noise=4.42895 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00275964 Jy
! Component: 100  -  total flux cleaned = -0.0227404 Jy
! Component: 150  -  total flux cleaned = -0.0392432 Jy
! Component: 200  -  total flux cleaned = -0.0507617 Jy
! Total flux subtracted in 200 components = -0.0507617 Jy
! Clean residual min=-0.063416 max=0.056389 Jy/beam
! Clean residual mean=0.000029 rms=0.016381 Jy/beam
! Combined flux in latest and established models = 3.06361 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 82 components and 3.06361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.951477Jy  sigma=1.074059
! Fit after  self-cal, rms=0.951169Jy  sigma=1.072534
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0157689 Jy
! Component: 100  -  total flux cleaned = -0.027952 Jy
! Component: 150  -  total flux cleaned = -0.0389328 Jy
! Component: 200  -  total flux cleaned = -0.0488141 Jy
! Total flux subtracted in 200 components = -0.0488141 Jy
! Clean residual min=-0.061658 max=0.056600 Jy/beam
! Clean residual mean=0.000030 rms=0.016298 Jy/beam
! Combined flux in latest and established models = 3.0148 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 102 components and 3.0148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.933789Jy  sigma=1.069635
! Fit after  self-cal, rms=0.933643Jy  sigma=1.068941
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.933643Jy  sigma=1.068941
! Fit after  self-cal, rms=0.219279Jy  sigma=0.380316
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.253 mas, bmaj=7.865 mas, bpa=-2.291 degrees
! Estimated noise=4.3968 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0266066 Jy
! Component: 100  -  total flux cleaned = -0.03021 Jy
! Component: 150  -  total flux cleaned = -0.0313862 Jy
! Component: 200  -  total flux cleaned = -0.032431 Jy
! Total flux subtracted in 200 components = -0.032431 Jy
! Clean residual min=-0.024900 max=0.020419 Jy/beam
! Clean residual mean=0.000020 rms=0.004471 Jy/beam
! Combined flux in latest and established models = 2.98236 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 127 components and 2.98236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.214648Jy  sigma=0.364076
! Fit after  self-cal, rms=0.214318Jy  sigma=0.362911
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00423657 Jy
! Component: 100  -  total flux cleaned = -0.00424059 Jy
! Component: 150  -  total flux cleaned = -0.00425503 Jy
! Component: 200  -  total flux cleaned = -0.00461742 Jy
! Total flux subtracted in 200 components = -0.00461742 Jy
! Clean residual min=-0.023549 max=0.019791 Jy/beam
! Clean residual mean=0.000019 rms=0.004317 Jy/beam
! Combined flux in latest and established models = 2.97775 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 150 components and 2.97775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.212802Jy  sigma=0.357258
! Fit after  self-cal, rms=0.212627Jy  sigma=0.356929
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.212627Jy  sigma=0.356929
! Fit after  self-cal, rms=0.214345Jy  sigma=0.351980
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.744 mas, bmaj=12.88 mas, bpa=0.7168 degrees
! Estimated noise=5.6357 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.015229 Jy
! Component: 100  -  total flux cleaned = -0.0173112 Jy
! Component: 150  -  total flux cleaned = -0.0194911 Jy
! Component: 200  -  total flux cleaned = -0.0213264 Jy
! Total flux subtracted in 200 components = -0.0213264 Jy
! Clean residual min=-0.024873 max=0.022632 Jy/beam
! Clean residual mean=0.000044 rms=0.005401 Jy/beam
! Combined flux in latest and established models = 2.95642 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 170 components and 2.95642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.212728Jy  sigma=0.346578
! Fit after  self-cal, rms=0.212573Jy  sigma=0.346159
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00449034 Jy
! Component: 100  -  total flux cleaned = -0.00621532 Jy
! Component: 150  -  total flux cleaned = -0.00747172 Jy
! Component: 200  -  total flux cleaned = -0.00857543 Jy
! Total flux subtracted in 200 components = -0.00857543 Jy
! Clean residual min=-0.023173 max=0.022467 Jy/beam
! Clean residual mean=0.000040 rms=0.005258 Jy/beam
! Combined flux in latest and established models = 2.94785 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 187 components and 2.94785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.212194Jy  sigma=0.344313
! Fit after  self-cal, rms=0.212121Jy  sigma=0.344185
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.25 mas, bmaj=7.875 mas, bpa=-2.318 degrees
! Estimated noise=4.39569 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.25 x 7.875 at -2.318 degrees (North through East)
! Clean map  min=-0.03546  max=2.4982 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.212121Jy  sigma=0.344185
! Fit after  self-cal, rms=0.202911Jy  sigma=0.311066
! Inverting map and beam 
! Estimated beam: bmin=3.245 mas, bmaj=7.88 mas, bpa=-2.37 degrees
! Estimated noise=4.39302 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0161201 Jy
! Component: 100  -  total flux cleaned = -0.0151979 Jy
! Component: 150  -  total flux cleaned = -0.0159826 Jy
! Component: 200  -  total flux cleaned = -0.0167051 Jy
! Total flux subtracted in 200 components = -0.0167051 Jy
! Clean residual min=-0.018154 max=0.017250 Jy/beam
! Clean residual mean=0.000019 rms=0.003544 Jy/beam
! Combined flux in latest and established models = 2.93114 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 195 components and 2.93114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.200527Jy  sigma=0.302054
! Fit after  self-cal, rms=0.200424Jy  sigma=0.301794
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000127012 Jy
! Component: 100  -  total flux cleaned = -0.000127462 Jy
! Component: 150  -  total flux cleaned = 0.000160057 Jy
! Component: 200  -  total flux cleaned = 0.000160511 Jy
! Total flux subtracted in 200 components = 0.000160511 Jy
! Clean residual min=-0.017595 max=0.016998 Jy/beam
! Clean residual mean=0.000019 rms=0.003463 Jy/beam
! Combined flux in latest and established models = 2.9313 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 201 components and 2.9313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.199539Jy  sigma=0.298431
! Fit after  self-cal, rms=0.199465Jy  sigma=0.298290
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.199465Jy  sigma=0.298290
! Fit after  self-cal, rms=0.200682Jy  sigma=0.295076
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.686 mas, bmaj=6.904 mas, bpa=-3.118 degrees
! Estimated noise=5.31828 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.04568 Jy
! Component: 100  -  total flux cleaned = 2.49841 Jy
! Component: 150  -  total flux cleaned = 2.65334 Jy
! Component: 200  -  total flux cleaned = 2.74703 Jy
! Total flux subtracted in 200 components = 2.74703 Jy
! Clean residual min=-0.028714 max=0.050719 Jy/beam
! Clean residual mean=-0.000014 rms=0.005953 Jy/beam
! Combined flux in latest and established models = 2.74703 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 2.74703 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.242 mas, bmaj=7.885 mas, bpa=-2.38 degrees
! Estimated noise=4.38971 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0760755 Jy
! Component: 100  -  total flux cleaned = 0.123148 Jy
! Component: 150  -  total flux cleaned = 0.154853 Jy
! Component: 200  -  total flux cleaned = 0.173123 Jy
! Total flux subtracted in 200 components = 0.173123 Jy
! Clean residual min=-0.019380 max=0.021193 Jy/beam
! Clean residual mean=0.000021 rms=0.003751 Jy/beam
! Combined flux in latest and established models = 2.92015 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 46 components and 2.92015 Jy
! Inverting map 
! Added new window around map position (-8, -17.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118736 Jy
! Component: 100  -  total flux cleaned = 0.0150614 Jy
! Component: 150  -  total flux cleaned = 0.0156172 Jy
! Component: 200  -  total flux cleaned = 0.016657 Jy
! Total flux subtracted in 200 components = 0.016657 Jy
! Clean residual min=-0.017220 max=0.015178 Jy/beam
! Clean residual mean=0.000021 rms=0.003305 Jy/beam
! Combined flux in latest and established models = 2.9368 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 58 components and 2.93681 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.741 mas, bmaj=12.92 mas, bpa=0.3994 degrees
! Estimated noise=5.63598 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0016726 Jy
! Component: 100  -  total flux cleaned = -0.00168781 Jy
! Component: 150  -  total flux cleaned = -0.00229995 Jy
! Component: 200  -  total flux cleaned = -0.00285931 Jy
! Total flux subtracted in 200 components = -0.00285931 Jy
! Clean residual min=-0.019314 max=0.017629 Jy/beam
! Clean residual mean=0.000045 rms=0.004126 Jy/beam
! Combined flux in latest and established models = 2.93395 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00100011 Jy
! Component: 100  -  total flux cleaned = -0.00192712 Jy
! Component: 150  -  total flux cleaned = -0.00256661 Jy
! Component: 200  -  total flux cleaned = -0.00336292 Jy
! Total flux subtracted in 200 components = -0.00336292 Jy
! Clean residual min=-0.018799 max=0.017550 Jy/beam
! Clean residual mean=0.000043 rms=0.004030 Jy/beam
! Combined flux in latest and established models = 2.93058 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 93 components and 2.93058 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.242 mas, bmaj=7.885 mas, bpa=-2.38 degrees
! Estimated noise=4.38971 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00133962 Jy
! Component: 100  -  total flux cleaned = -0.00172684 Jy
! Component: 150  -  total flux cleaned = -0.00278541 Jy
! Component: 200  -  total flux cleaned = -0.00342318 Jy
! Total flux subtracted in 200 components = -0.00342318 Jy
! Clean residual min=-0.016292 max=0.015060 Jy/beam
! Clean residual mean=0.000018 rms=0.003021 Jy/beam
! Combined flux in latest and established models = 2.92716 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 106 components and 2.92716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.198165Jy  sigma=0.286985
! Fit after  self-cal, rms=0.197564Jy  sigma=0.284986
wmodel J1743-0350_S_h_map.mod
! Writing 106 model components to file: J1743-0350_S_h_map.mod
wobs   J1743-0350_S_h_uvs.fits
! Writing UV FITS file: J1743-0350_S_h_uvs.fits
wwins  J1743-0350_S_h_map.win
! wwins: Wrote 5 windows to J1743-0350_S_h_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00205799 Jy
! Component: 100  -  total flux cleaned = -0.00368893 Jy
! Component: 150  -  total flux cleaned = -0.00412634 Jy
! Component: 200  -  total flux cleaned = -0.00453416 Jy
! Component: 250  -  total flux cleaned = -0.00453902 Jy
! Component: 300  -  total flux cleaned = -0.00528686 Jy
! Component: 350  -  total flux cleaned = -0.00600634 Jy
! Component: 400  -  total flux cleaned = -0.00617847 Jy
! Component: 450  -  total flux cleaned = -0.00566486 Jy
! Component: 500  -  total flux cleaned = -0.00583113 Jy
! Component: 550  -  total flux cleaned = -0.00533424 Jy
! Component: 600  -  total flux cleaned = -0.00533194 Jy
! Component: 650  -  total flux cleaned = -0.00453062 Jy
! Component: 700  -  total flux cleaned = -0.0042122 Jy
! Component: 750  -  total flux cleaned = -0.00328048 Jy
! Component: 800  -  total flux cleaned = -0.00221109 Jy
! Component: 850  -  total flux cleaned = -0.00160956 Jy
! Component: 900  -  total flux cleaned = -0.000863898 Jy
! Component: 950  -  total flux cleaned = -0.00056827 Jy
! Component: 1000  -  total flux cleaned = 0.000593575 Jy
! Component: 1050  -  total flux cleaned = 0.00131143 Jy
! Component: 1100  -  total flux cleaned = 0.00216574 Jy
! Component: 1150  -  total flux cleaned = 0.00314912 Jy
! Component: 1200  -  total flux cleaned = 0.00426029 Jy
! Component: 1250  -  total flux cleaned = 0.00508424 Jy
! Component: 1300  -  total flux cleaned = 0.00603429 Jy
! Component: 1350  -  total flux cleaned = 0.00657192 Jy
! Component: 1400  -  total flux cleaned = 0.00750584 Jy
! Component: 1450  -  total flux cleaned = 0.00869162 Jy
! Component: 1500  -  total flux cleaned = 0.00947404 Jy
! Component: 1550  -  total flux cleaned = 0.0103786 Jy
! Component: 1600  -  total flux cleaned = 0.0112724 Jy
! Component: 1650  -  total flux cleaned = 0.0117796 Jy
! Component: 1700  -  total flux cleaned = 0.0129091 Jy
! Component: 1750  -  total flux cleaned = 0.013655 Jy
! Component: 1800  -  total flux cleaned = 0.0142697 Jy
! Component: 1850  -  total flux cleaned = 0.0148787 Jy
! Component: 1900  -  total flux cleaned = 0.0154844 Jy
! Component: 1950  -  total flux cleaned = 0.0158433 Jy
! Component: 2000  -  total flux cleaned = 0.0160813 Jy
! Component: 2050  -  total flux cleaned = 0.0167875 Jy
! Component: 2100  -  total flux cleaned = 0.0169049 Jy
! Component: 2150  -  total flux cleaned = 0.0175982 Jy
! Component: 2200  -  total flux cleaned = 0.0182836 Jy
! Component: 2250  -  total flux cleaned = 0.0181721 Jy
! Component: 2300  -  total flux cleaned = 0.0187349 Jy
! Component: 2350  -  total flux cleaned = 0.0195147 Jy
! Component: 2400  -  total flux cleaned = 0.0197341 Jy
! Component: 2450  -  total flux cleaned = 0.0197353 Jy
! Component: 2500  -  total flux cleaned = 0.0201699 Jy
! Component: 2550  -  total flux cleaned = 0.0206026 Jy
! Component: 2600  -  total flux cleaned = 0.0206025 Jy
! Component: 2650  -  total flux cleaned = 0.0211332 Jy
! Component: 2700  -  total flux cleaned = 0.0211322 Jy
! Component: 2750  -  total flux cleaned = 0.0208183 Jy
! Component: 2800  -  total flux cleaned = 0.0211323 Jy
! Component: 2850  -  total flux cleaned = 0.021853 Jy
! Component: 2900  -  total flux cleaned = 0.0216475 Jy
! Component: 2950  -  total flux cleaned = 0.021445 Jy
! Component: 3000  -  total flux cleaned = 0.0219487 Jy
! Component: 3050  -  total flux cleaned = 0.0219507 Jy
! Component: 3100  -  total flux cleaned = 0.022347 Jy
! Component: 3150  -  total flux cleaned = 0.0222472 Jy
! Component: 3200  -  total flux cleaned = 0.0227365 Jy
! Component: 3250  -  total flux cleaned = 0.0221546 Jy
! Component: 3300  -  total flux cleaned = 0.0223484 Jy
! Component: 3350  -  total flux cleaned = 0.022828 Jy
! Component: 3400  -  total flux cleaned = 0.0223517 Jy
! Component: 3450  -  total flux cleaned = 0.0227304 Jy
! Component: 3500  -  total flux cleaned = 0.0227303 Jy
! Component: 3550  -  total flux cleaned = 0.022824 Jy
! Component: 3600  -  total flux cleaned = 0.0232878 Jy
! Component: 3650  -  total flux cleaned = 0.0231953 Jy
! Component: 3700  -  total flux cleaned = 0.0232879 Jy
! Component: 3750  -  total flux cleaned = 0.0235616 Jy
! Component: 3800  -  total flux cleaned = 0.023743 Jy
! Component: 3850  -  total flux cleaned = 0.0237425 Jy
! Component: 3900  -  total flux cleaned = 0.023832 Jy
! Component: 3950  -  total flux cleaned = 0.0237434 Jy
! Component: 4000  -  total flux cleaned = 0.0241855 Jy
! Component: 4050  -  total flux cleaned = 0.024274 Jy
! Total flux subtracted in 4096 components = 0.0242746 Jy
! Clean residual min=-0.005269 max=0.004560 Jy/beam
! Clean residual mean=0.000011 rms=0.001679 Jy/beam
! Combined flux in latest and established models = 2.95143 Jy
keep
! Adding 312 model components to the UV plane model.
! The established model now contains 418 components and 2.95144 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1743-0350_S_h_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.242 x 7.885 at -2.38 degrees (North through East)
! Clean map  min=-0.017721  max=2.549 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1743-0350_S_h_map.fits
wmodel /image_prod/ug002_uva//J1743-0350_S_h_map.mod
! Writing 418 model components to file: /image_prod/ug002_uva//J1743-0350_S_h_map.mod
wobs   /image_prod/ug002_uva//J1743-0350_S_h_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1743-0350_S_h_uvs.fits
wwins  /image_prod/ug002_uva//J1743-0350_S_h_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J1743-0350_S_h_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.54897 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00166954 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.196496 0.196496 0.392991 0.785983 1.57197 3.14393 6.28786 12.5757 25.1514 50.3029
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.548 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1526.75 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1743-0350_S_h_dfm.log closed on Thu Mar  5 03:22:58 2020