! Started logfile: /image_prod/ug002_uva//J1743-0350_S_b_dfm.log on Thu Mar  5 03:22:27 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1743-0350_S_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1743-0350_S_b_uva.fits
! AN table 1: 6 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.847222 visibilities/baseline/integration-bin.
! Found source: J1743-0350
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 549 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1743-0350_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=3.354818Jy  sigma=13.271997
! Fit after  self-cal, rms=2.425591Jy  sigma=9.397760
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.076 mas, bmaj=13.2 mas, bpa=-15.67 degrees
! Estimated noise=8.19355 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.28191 Jy
! Component: 100  -  total flux cleaned = 2.74163 Jy
! Total flux subtracted in 100 components = 2.74163 Jy
! Clean residual min=-0.279034 max=0.633601 Jy/beam
! Clean residual mean=0.000078 rms=0.111279 Jy/beam
! Combined flux in latest and established models = 2.74163 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 2.74163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.017018Jy  sigma=6.755366
! Fit after  self-cal, rms=1.016998Jy  sigma=6.755318
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.672 mas, bmaj=13.92 mas, bpa=-15.03 degrees
! Estimated noise=7.19321 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-23, -100.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.508321 Jy
! Component: 100  -  total flux cleaned = 0.641031 Jy
! Component: 150  -  total flux cleaned = 0.669483 Jy
! Component: 200  -  total flux cleaned = 0.684536 Jy
! Total flux subtracted in 200 components = 0.684536 Jy
! Clean residual min=-0.195731 max=0.329869 Jy/beam
! Clean residual mean=-0.000125 rms=0.054324 Jy/beam
! Combined flux in latest and established models = 3.42617 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 28 components and 3.42617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.899444Jy  sigma=4.967140
! Fit after  self-cal, rms=0.875311Jy  sigma=4.885050
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.672 x 13.92 at -15.03 degrees (North through East)
! Clean map  min=-0.21162  max=2.7873 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.00     HN        0.97     KP        0.96     
!   LA        2.99     MK        1.01     NL        0.99     OV        0.94     
!   PT        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.68     FD        0.99     HN        0.98     KP        0.96     
!   LA        0.62     MK        1.02     NL        1.09     OV        0.97     
!   PT        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        0.98     KP        0.95     
!   LA        0.69     MK        0.97     NL        0.97     OV        0.89     
!   PT        0.95     
! 
! 
! Fit before self-cal, rms=0.875311Jy  sigma=4.885050
! Fit after  self-cal, rms=0.308779Jy  sigma=1.332500
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.629 mas, bmaj=13.53 mas, bpa=-14.92 degrees
! Estimated noise=7.31262 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0993033 Jy
! Component: 100  -  total flux cleaned = -0.119774 Jy
! Component: 150  -  total flux cleaned = -0.136134 Jy
! Component: 200  -  total flux cleaned = -0.143803 Jy
! Total flux subtracted in 200 components = -0.143803 Jy
! Clean residual min=-0.090457 max=0.072126 Jy/beam
! Clean residual mean=0.000032 rms=0.020450 Jy/beam
! Combined flux in latest and established models = 3.28236 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 48 components and 3.28236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.267222Jy  sigma=1.115408
! Fit after  self-cal, rms=0.263934Jy  sigma=1.098832
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.263934Jy  sigma=1.098832
! Fit after  self-cal, rms=0.261243Jy  sigma=1.053146
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.623 mas, bmaj=13.45 mas, bpa=-14.89 degrees
! Estimated noise=7.32975 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.049554 Jy
! Component: 100  -  total flux cleaned = -0.0622625 Jy
! Component: 150  -  total flux cleaned = -0.0692156 Jy
! Component: 200  -  total flux cleaned = -0.0708393 Jy
! Total flux subtracted in 200 components = -0.0708393 Jy
! Clean residual min=-0.073473 max=0.055843 Jy/beam
! Clean residual mean=0.000029 rms=0.016609 Jy/beam
! Combined flux in latest and established models = 3.21153 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 70 components and 3.21152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.245837Jy  sigma=0.968051
! Fit after  self-cal, rms=0.244155Jy  sigma=0.962898
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00431963 Jy
! Component: 100  -  total flux cleaned = -0.00709078 Jy
! Component: 150  -  total flux cleaned = -0.00944701 Jy
! Component: 200  -  total flux cleaned = -0.00943162 Jy
! Total flux subtracted in 200 components = -0.00943162 Jy
! Clean residual min=-0.069357 max=0.062050 Jy/beam
! Clean residual mean=-0.000001 rms=0.016002 Jy/beam
! Combined flux in latest and established models = 3.20209 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 93 components and 3.20209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.241006Jy  sigma=0.946777
! Fit after  self-cal, rms=0.241034Jy  sigma=0.945964
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.241034Jy  sigma=0.945964
! Fit after  self-cal, rms=0.240008Jy  sigma=0.911981
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.616 mas, bmaj=13.39 mas, bpa=-14.88 degrees
! Estimated noise=7.34167 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0332446 Jy
! Component: 100  -  total flux cleaned = -0.0340841 Jy
! Component: 150  -  total flux cleaned = -0.0340736 Jy
! Component: 200  -  total flux cleaned = -0.0345948 Jy
! Total flux subtracted in 200 components = -0.0345948 Jy
! Clean residual min=-0.060431 max=0.043090 Jy/beam
! Clean residual mean=0.000012 rms=0.013709 Jy/beam
! Combined flux in latest and established models = 3.1675 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 112 components and 3.1675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.232754Jy  sigma=0.871313
! Fit after  self-cal, rms=0.231830Jy  sigma=0.867855
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00144351 Jy
! Component: 100  -  total flux cleaned = -0.00230654 Jy
! Component: 150  -  total flux cleaned = -0.0027198 Jy
! Component: 200  -  total flux cleaned = -0.0027411 Jy
! Total flux subtracted in 200 components = -0.0027411 Jy
! Clean residual min=-0.057089 max=0.050548 Jy/beam
! Clean residual mean=-0.000003 rms=0.013412 Jy/beam
! Combined flux in latest and established models = 3.16476 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 127 components and 3.16476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.230315Jy  sigma=0.860428
! Fit after  self-cal, rms=0.230398Jy  sigma=0.859895
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.230398Jy  sigma=0.859895
! Fit after  self-cal, rms=0.230413Jy  sigma=0.838369
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.573 mas, bmaj=14.68 mas, bpa=-4.095 degrees
! Estimated noise=8.63335 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0299702 Jy
! Component: 100  -  total flux cleaned = -0.0363161 Jy
! Component: 150  -  total flux cleaned = -0.0359177 Jy
! Component: 200  -  total flux cleaned = -0.0346225 Jy
! Total flux subtracted in 200 components = -0.0346225 Jy
! Clean residual min=-0.058624 max=0.044776 Jy/beam
! Clean residual mean=-0.000002 rms=0.017196 Jy/beam
! Combined flux in latest and established models = 3.13014 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 145 components and 3.13014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.226850Jy  sigma=0.814885
! Fit after  self-cal, rms=0.226328Jy  sigma=0.812141
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00137232 Jy
! Component: 100  -  total flux cleaned = 0.000114652 Jy
! Component: 150  -  total flux cleaned = 0.00078556 Jy
! Component: 200  -  total flux cleaned = 0.000782423 Jy
! Total flux subtracted in 200 components = 0.000782423 Jy
! Clean residual min=-0.056351 max=0.049879 Jy/beam
! Clean residual mean=-0.000023 rms=0.016755 Jy/beam
! Combined flux in latest and established models = 3.13092 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 177 components and 3.13092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.225757Jy  sigma=0.808552
! Fit after  self-cal, rms=0.225928Jy  sigma=0.808245
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.609 mas, bmaj=13.34 mas, bpa=-14.87 degrees
! Estimated noise=7.34822 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.609 x 13.34 at -14.87 degrees (North through East)
! Clean map  min=-0.045319  max=2.8447 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.225928Jy  sigma=0.808245
! Fit after  self-cal, rms=0.150280Jy  sigma=0.565030
! Inverting map and beam 
! Estimated beam: bmin=3.611 mas, bmaj=13.31 mas, bpa=-14.84 degrees
! Estimated noise=7.35864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0206988 Jy
! Component: 100  -  total flux cleaned = -0.0189205 Jy
! Component: 150  -  total flux cleaned = -0.0166479 Jy
! Component: 200  -  total flux cleaned = -0.0139966 Jy
! Total flux subtracted in 200 components = -0.0139966 Jy
! Clean residual min=-0.043028 max=0.029958 Jy/beam
! Clean residual mean=0.000010 rms=0.010319 Jy/beam
! Combined flux in latest and established models = 3.11692 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 186 components and 3.11692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.143683Jy  sigma=0.537917
! Fit after  self-cal, rms=0.142838Jy  sigma=0.534743
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00198743 Jy
! Component: 100  -  total flux cleaned = -0.00167486 Jy
! Component: 150  -  total flux cleaned = -0.00197105 Jy
! Component: 200  -  total flux cleaned = -0.00223464 Jy
! Total flux subtracted in 200 components = -0.00223464 Jy
! Clean residual min=-0.040977 max=0.035926 Jy/beam
! Clean residual mean=-0.000001 rms=0.010145 Jy/beam
! Combined flux in latest and established models = 3.11469 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 192 components and 3.11469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.141107Jy  sigma=0.529087
! Fit after  self-cal, rms=0.141131Jy  sigma=0.528533
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.141131Jy  sigma=0.528533
! Fit after  self-cal, rms=0.138886Jy  sigma=0.511065
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.053 mas, bmaj=12.48 mas, bpa=-15.45 degrees
! Estimated noise=8.37492 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.3297 Jy
! Component: 100  -  total flux cleaned = 2.86398 Jy
! Component: 150  -  total flux cleaned = 3.0375 Jy
! Component: 200  -  total flux cleaned = 3.10774 Jy
! Total flux subtracted in 200 components = 3.10774 Jy
! Clean residual min=-0.060914 max=0.068376 Jy/beam
! Clean residual mean=0.000085 rms=0.015290 Jy/beam
! Combined flux in latest and established models = 3.10774 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 3.10774 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.605 mas, bmaj=13.28 mas, bpa=-14.84 degrees
! Estimated noise=7.3606 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-53.5, -78).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0272864 Jy
! Component: 100  -  total flux cleaned = 0.0244534 Jy
! Component: 150  -  total flux cleaned = 0.015381 Jy
! Component: 200  -  total flux cleaned = 0.0085233 Jy
! Total flux subtracted in 200 components = 0.0085233 Jy
! Clean residual min=-0.042904 max=0.039670 Jy/beam
! Clean residual mean=0.000081 rms=0.010408 Jy/beam
! Combined flux in latest and established models = 3.11626 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 43 components and 3.11626 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.544 mas, bmaj=14.6 mas, bpa=-4.076 degrees
! Estimated noise=8.67642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0205051 Jy
! Component: 100  -  total flux cleaned = -0.0300793 Jy
! Component: 150  -  total flux cleaned = -0.0389349 Jy
! Component: 200  -  total flux cleaned = -0.0465265 Jy
! Total flux subtracted in 200 components = -0.0465265 Jy
! Clean residual min=-0.040535 max=0.033056 Jy/beam
! Clean residual mean=0.000039 rms=0.011620 Jy/beam
! Combined flux in latest and established models = 3.06973 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00432758 Jy
! Component: 100  -  total flux cleaned = -0.00820472 Jy
! Component: 150  -  total flux cleaned = -0.0107315 Jy
! Component: 200  -  total flux cleaned = -0.013512 Jy
! Total flux subtracted in 200 components = -0.013512 Jy
! Clean residual min=-0.038309 max=0.032112 Jy/beam
! Clean residual mean=0.000023 rms=0.010765 Jy/beam
! Combined flux in latest and established models = 3.05622 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 84 components and 3.05622 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.605 mas, bmaj=13.28 mas, bpa=-14.84 degrees
! Estimated noise=7.3606 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0100768 Jy
! Component: 100  -  total flux cleaned = -0.0132208 Jy
! Component: 150  -  total flux cleaned = -0.0153991 Jy
! Component: 200  -  total flux cleaned = -0.0178577 Jy
! Total flux subtracted in 200 components = -0.0178577 Jy
! Clean residual min=-0.035032 max=0.027490 Jy/beam
! Clean residual mean=0.000033 rms=0.008132 Jy/beam
! Combined flux in latest and established models = 3.03836 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 98 components and 3.03836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.131695Jy  sigma=0.471047
! Fit after  self-cal, rms=0.129380Jy  sigma=0.460872
wmodel J1743-0350_S_b_map.mod
! Writing 98 model components to file: J1743-0350_S_b_map.mod
wobs   J1743-0350_S_b_uvs.fits
! Writing UV FITS file: J1743-0350_S_b_uvs.fits
wwins  J1743-0350_S_b_map.win
! wwins: Wrote 3 windows to J1743-0350_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0077217 Jy
! Component: 100  -  total flux cleaned = -0.0136661 Jy
! Component: 150  -  total flux cleaned = -0.019494 Jy
! Component: 200  -  total flux cleaned = -0.0219632 Jy
! Component: 250  -  total flux cleaned = -0.0246229 Jy
! Component: 300  -  total flux cleaned = -0.0274712 Jy
! Component: 350  -  total flux cleaned = -0.0298269 Jy
! Component: 400  -  total flux cleaned = -0.0326892 Jy
! Component: 450  -  total flux cleaned = -0.0350961 Jy
! Component: 500  -  total flux cleaned = -0.0373956 Jy
! Component: 550  -  total flux cleaned = -0.0398587 Jy
! Component: 600  -  total flux cleaned = -0.0416934 Jy
! Component: 650  -  total flux cleaned = -0.0442147 Jy
! Component: 700  -  total flux cleaned = -0.0459086 Jy
! Component: 750  -  total flux cleaned = -0.0475387 Jy
! Component: 800  -  total flux cleaned = -0.0491186 Jy
! Component: 850  -  total flux cleaned = -0.0504304 Jy
! Component: 900  -  total flux cleaned = -0.051919 Jy
! Component: 950  -  total flux cleaned = -0.0529481 Jy
! Component: 1000  -  total flux cleaned = -0.0539516 Jy
! Component: 1050  -  total flux cleaned = -0.0551283 Jy
! Component: 1100  -  total flux cleaned = -0.0566634 Jy
! Component: 1150  -  total flux cleaned = -0.0579765 Jy
! Component: 1200  -  total flux cleaned = -0.0596311 Jy
! Component: 1250  -  total flux cleaned = -0.0612531 Jy
! Component: 1300  -  total flux cleaned = -0.0630177 Jy
! Component: 1350  -  total flux cleaned = -0.0642315 Jy
! Component: 1400  -  total flux cleaned = -0.0652569 Jy
! Component: 1450  -  total flux cleaned = -0.0660994 Jy
! Component: 1500  -  total flux cleaned = -0.0672631 Jy
! Component: 1550  -  total flux cleaned = -0.0682476 Jy
! Component: 1600  -  total flux cleaned = -0.0692189 Jy
! Component: 1650  -  total flux cleaned = -0.0701753 Jy
! Component: 1700  -  total flux cleaned = -0.0709627 Jy
! Component: 1750  -  total flux cleaned = -0.0714314 Jy
! Component: 1800  -  total flux cleaned = -0.0720517 Jy
! Component: 1850  -  total flux cleaned = -0.0728211 Jy
! Component: 1900  -  total flux cleaned = -0.0735828 Jy
! Component: 1950  -  total flux cleaned = -0.0743395 Jy
! Component: 2000  -  total flux cleaned = -0.0750926 Jy
! Component: 2050  -  total flux cleaned = -0.0758405 Jy
! Component: 2100  -  total flux cleaned = -0.0768802 Jy
! Component: 2150  -  total flux cleaned = -0.0774704 Jy
! Component: 2200  -  total flux cleaned = -0.0782033 Jy
! Component: 2250  -  total flux cleaned = -0.0792249 Jy
! Component: 2300  -  total flux cleaned = -0.0799519 Jy
! Component: 2350  -  total flux cleaned = -0.080678 Jy
! Component: 2400  -  total flux cleaned = -0.0819784 Jy
! Component: 2450  -  total flux cleaned = -0.0825556 Jy
! Component: 2500  -  total flux cleaned = -0.083131 Jy
! Component: 2550  -  total flux cleaned = -0.0838507 Jy
! Component: 2600  -  total flux cleaned = -0.0847129 Jy
! Component: 2650  -  total flux cleaned = -0.0851442 Jy
! Component: 2700  -  total flux cleaned = -0.0855748 Jy
! Component: 2750  -  total flux cleaned = -0.0861485 Jy
! Component: 2800  -  total flux cleaned = -0.0867234 Jy
! Component: 2850  -  total flux cleaned = -0.0872978 Jy
! Component: 2900  -  total flux cleaned = -0.0880167 Jy
! Component: 2950  -  total flux cleaned = -0.0887385 Jy
! Component: 3000  -  total flux cleaned = -0.0893169 Jy
! Component: 3050  -  total flux cleaned = -0.0900415 Jy
! Component: 3100  -  total flux cleaned = -0.0907681 Jy
! Component: 3150  -  total flux cleaned = -0.0913502 Jy
! Component: 3200  -  total flux cleaned = -0.0920792 Jy
! Component: 3250  -  total flux cleaned = -0.0928118 Jy
! Component: 3300  -  total flux cleaned = -0.093548 Jy
! Component: 3350  -  total flux cleaned = -0.094286 Jy
! Component: 3400  -  total flux cleaned = -0.0948783 Jy
! Component: 3450  -  total flux cleaned = -0.0953238 Jy
! Component: 3500  -  total flux cleaned = -0.0957715 Jy
! Component: 3550  -  total flux cleaned = -0.0965229 Jy
! Component: 3600  -  total flux cleaned = -0.096825 Jy
! Component: 3650  -  total flux cleaned = -0.0969765 Jy
! Component: 3700  -  total flux cleaned = -0.0977401 Jy
! Component: 3750  -  total flux cleaned = -0.0978957 Jy
! Component: 3800  -  total flux cleaned = -0.09805 Jy
! Component: 3850  -  total flux cleaned = -0.0986742 Jy
! Component: 3900  -  total flux cleaned = -0.098832 Jy
! Component: 3950  -  total flux cleaned = -0.099149 Jy
! Component: 4000  -  total flux cleaned = -0.0996272 Jy
! Component: 4050  -  total flux cleaned = -0.0999486 Jy
! Total flux subtracted in 4096 components = -0.100273 Jy
! Clean residual min=-0.010257 max=0.009376 Jy/beam
! Clean residual mean=-0.000032 rms=0.002660 Jy/beam
! Combined flux in latest and established models = 2.93809 Jy
keep
! Adding 236 model components to the UV plane model.
! The established model now contains 334 components and 2.93809 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1743-0350_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.605 x 13.28 at -14.84 degrees (North through East)
! Clean map  min=-0.031383  max=2.8613 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1743-0350_S_b_map.fits
wmodel /image_prod/ug002_uva//J1743-0350_S_b_map.mod
! Writing 334 model components to file: /image_prod/ug002_uva//J1743-0350_S_b_map.mod
wobs   /image_prod/ug002_uva//J1743-0350_S_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1743-0350_S_b_uvs.fits
wwins  /image_prod/ug002_uva//J1743-0350_S_b_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1743-0350_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.86133 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00274997 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.288324 0.288324 0.576648 1.1533 2.30659 4.61318 9.22636 18.4527 36.9054 73.8109
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0082 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.861 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1040.5 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1743-0350_S_b_dfm.log closed on Thu Mar  5 03:22:30 2020