! Started logfile: /image_prod/ug002_uva//J1743+1326_S_a_dfm.log on Thu Mar  5 03:21:34 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1743+1326_S_a_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1743+1326_S_a_uva.fits
! AN table 1: 37 integrations on 1 of 1 possible baselines.
! AN table 2: 112 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.572638 visibilities/baseline/integration-bin.
! Found source: J1743+1326
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 1218 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1743+1326_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 74 telescope corrections were flagged in sub-array 1.
!  A total of 193 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 74 telescope corrections were flagged in sub-array 1.
!  A total of 193 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 74 telescope corrections were flagged in sub-array 1.
!  A total of 193 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.002185Jy  sigma=11.388075
! Fit after  self-cal, rms=0.969305Jy  sigma=11.080645
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=23.47 mas, bmaj=29.98 mas, bpa=-21.39 degrees
! Estimated noise=2.23754 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0233678 Jy
! Component: 100  -  total flux cleaned = 0.0282597 Jy
! Total flux subtracted in 100 components = 0.0282597 Jy
! Clean residual min=-0.002098 max=0.002121 Jy/beam
! Clean residual mean=-0.000024 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.0282597 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0282597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.033041Jy  sigma=0.374301
! Fit after  self-cal, rms=0.031795Jy  sigma=0.360817
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=27.35 mas, bmaj=29.54 mas, bpa=-26.02 degrees
! Estimated noise=1.98311 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0035574 Jy
! Component: 100  -  total flux cleaned = 0.00405552 Jy
! Component: 150  -  total flux cleaned = 0.00408123 Jy
! Component: 200  -  total flux cleaned = 0.00422556 Jy
! Total flux subtracted in 200 components = 0.00422556 Jy
! Clean residual min=-0.000555 max=0.000556 Jy/beam
! Clean residual mean=-0.000007 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.0324853 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 74 components and 0.0324853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.031308Jy  sigma=0.355337
! Fit after  self-cal, rms=0.031239Jy  sigma=0.354943
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 27.35 x 29.54 at -26.02 degrees (North through East)
! Clean map  min=-0.0015432  max=0.030678 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.00*    OV        0.00*    
! 
!  A total of 111 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.87     KP        1.23     LA        0.98     PT        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.00*    OV        0.00*    
! 
!  A total of 111 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.99     KP        0.92     LA        0.96     PT        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   LA        0.00*    OV        0.00*    
! 
!  A total of 111 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.06     KP        0.99     LA        1.02     PT        0.97     
! 
! 
! Fit before self-cal, rms=0.031239Jy  sigma=0.354943
! Fit after  self-cal, rms=0.032041Jy  sigma=0.373390
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=23.29 mas, bmaj=29.46 mas, bpa=14.89 degrees
! Estimated noise=2.36533 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000421439 Jy
! Component: 100  -  total flux cleaned = 0.000399942 Jy
! Component: 150  -  total flux cleaned = 0.000509281 Jy
! Component: 200  -  total flux cleaned = 0.000582396 Jy
! Total flux subtracted in 200 components = 0.000582396 Jy
! Clean residual min=-0.000430 max=0.000449 Jy/beam
! Clean residual mean=0.000002 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.0330677 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 129 components and 0.0330677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.032017Jy  sigma=0.373033
! Fit after  self-cal, rms=0.032064Jy  sigma=0.372402
! Inverting map 
! Added new window around map position (-107.5, 59).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000472169 Jy
! Component: 100  -  total flux cleaned = 0.000467115 Jy
! Component: 150  -  total flux cleaned = 0.000540398 Jy
! Component: 200  -  total flux cleaned = 0.00059591 Jy
! Total flux subtracted in 200 components = 0.00059591 Jy
! Clean residual min=-0.000489 max=0.000275 Jy/beam
! Clean residual mean=0.000000 rms=0.000105 Jy/beam
! Combined flux in latest and established models = 0.0336636 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 176 components and 0.0336636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.032055Jy  sigma=0.372236
! Fit after  self-cal, rms=0.032055Jy  sigma=0.372185
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.032055Jy  sigma=0.372185
! Fit after  self-cal, rms=0.032310Jy  sigma=0.371955
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=23.29 mas, bmaj=29.44 mas, bpa=15.64 degrees
! Estimated noise=2.35769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000328249 Jy
! Component: 100  -  total flux cleaned = 0.000307866 Jy
! Component: 150  -  total flux cleaned = 0.00029749 Jy
! Component: 200  -  total flux cleaned = 0.000324789 Jy
! Total flux subtracted in 200 components = 0.000324789 Jy
! Clean residual min=-0.000347 max=0.000253 Jy/beam
! Clean residual mean=-0.000000 rms=0.000074 Jy/beam
! Combined flux in latest and established models = 0.0339884 Jy
selfcal
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 226 components and 0.0339884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.032307Jy  sigma=0.371888
! Fit after  self-cal, rms=0.032359Jy  sigma=0.371680
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167553 Jy
! Component: 100  -  total flux cleaned = 4.03866e-05 Jy
! Component: 150  -  total flux cleaned = -6.40423e-05 Jy
! Component: 200  -  total flux cleaned = -0.000189473 Jy
! Total flux subtracted in 200 components = -0.000189473 Jy
! Clean residual min=-0.000420 max=0.000405 Jy/beam
! Clean residual mean=-0.000001 rms=0.000112 Jy/beam
! Combined flux in latest and established models = 0.0337989 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 287 components and 0.0337989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.032352Jy  sigma=0.371585
! Fit after  self-cal, rms=0.032242Jy  sigma=0.370536
! Inverting map 
! Added new window around map position (-122.5, -121.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000483691 Jy
! Component: 100  -  total flux cleaned = 0.000666374 Jy
! Component: 150  -  total flux cleaned = 0.000746671 Jy
! Component: 200  -  total flux cleaned = 0.000833475 Jy
! Total flux subtracted in 200 components = 0.000833475 Jy
! Clean residual min=-0.000771 max=0.000479 Jy/beam
! Clean residual mean=-0.000003 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0346324 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 334 components and 0.0346324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.032218Jy  sigma=0.370234
! Fit after  self-cal, rms=0.032207Jy  sigma=0.370142
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.032207Jy  sigma=0.370142
! Fit after  self-cal, rms=0.032356Jy  sigma=0.370048
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=23.33 mas, bmaj=29.38 mas, bpa=15.49 degrees
! Estimated noise=2.34751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00035171 Jy
! Component: 100  -  total flux cleaned = 0.000356669 Jy
! Component: 150  -  total flux cleaned = 0.00033108 Jy
! Component: 200  -  total flux cleaned = 0.000409017 Jy
! Total flux subtracted in 200 components = 0.000409017 Jy
! Clean residual min=-0.000698 max=0.000379 Jy/beam
! Clean residual mean=-0.000002 rms=0.000137 Jy/beam
! Combined flux in latest and established models = 0.0350414 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 352 components and 0.0350414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.032341Jy  sigma=0.369918
! Fit after  self-cal, rms=0.032334Jy  sigma=0.369511
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000163346 Jy
! Component: 100  -  total flux cleaned = 0.000298181 Jy
! Component: 150  -  total flux cleaned = 0.000320717 Jy
! Component: 200  -  total flux cleaned = 0.000414519 Jy
! Total flux subtracted in 200 components = 0.000414519 Jy
! Clean residual min=-0.000698 max=0.000472 Jy/beam
! Clean residual mean=-0.000001 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.0354559 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 392 components and 0.0354559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.032314Jy  sigma=0.369331
! Fit after  self-cal, rms=0.032326Jy  sigma=0.369262
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.032326Jy  sigma=0.369262
! Fit after  self-cal, rms=0.032263Jy  sigma=0.369214
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=23.68 mas, bmaj=29.34 mas, bpa=14.96 degrees
! Estimated noise=2.33074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000240467 Jy
! Component: 100  -  total flux cleaned = 0.000177676 Jy
! Component: 150  -  total flux cleaned = 0.000145008 Jy
! Component: 200  -  total flux cleaned = 0.000192389 Jy
! Total flux subtracted in 200 components = 0.000192389 Jy
! Clean residual min=-0.000584 max=0.000405 Jy/beam
! Clean residual mean=-0.000002 rms=0.000127 Jy/beam
! Combined flux in latest and established models = 0.0356483 Jy
selfcal
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 423 components and 0.0356483 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.032250Jy  sigma=0.369137
! Fit after  self-cal, rms=0.032254Jy  sigma=0.369057
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.42615e-05 Jy
! Component: 100  -  total flux cleaned = 9.25326e-05 Jy
! Component: 150  -  total flux cleaned = 0.000109869 Jy
! Component: 200  -  total flux cleaned = 0.000156992 Jy
! Total flux subtracted in 200 components = 0.000156992 Jy
! Clean residual min=-0.000334 max=0.000322 Jy/beam
! Clean residual mean=0.000000 rms=0.000103 Jy/beam
! Combined flux in latest and established models = 0.0358053 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 458 components and 0.0358053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.032246Jy  sigma=0.369016
! Fit after  self-cal, rms=0.032248Jy  sigma=0.369004
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=23.43 mas, bmaj=29.3 mas, bpa=15.19 degrees
! Estimated noise=2.33243 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 23.43 x 29.3 at 15.19 degrees (North through East)
! Clean map  min=-0.00099872  max=0.030331 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.3 mas, bmaj=29.7 mas, bpa=-7.418 degrees
! Estimated noise=2.59593 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0232273 Jy
! Component: 100  -  total flux cleaned = 0.0298826 Jy
! Component: 150  -  total flux cleaned = 0.0337636 Jy
! Component: 200  -  total flux cleaned = 0.0368239 Jy
! Total flux subtracted in 200 components = 0.0368239 Jy
! Clean residual min=-0.012681 max=0.006004 Jy/beam
! Clean residual mean=-0.000020 rms=0.001516 Jy/beam
! Combined flux in latest and established models = 0.0368239 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 55 model components to the UV plane model.
! The established model now contains 55 components and 0.0368239 Jy
! Inverting map and beam 
! Estimated beam: bmin=23.43 mas, bmaj=29.3 mas, bpa=15.19 degrees
! Estimated noise=2.33243 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00252997 Jy
! Component: 100  -  total flux cleaned = 0.0041033 Jy
! Component: 150  -  total flux cleaned = 0.00519744 Jy
! Component: 200  -  total flux cleaned = 0.00601267 Jy
! Total flux subtracted in 200 components = 0.00601267 Jy
! Clean residual min=-0.001029 max=0.001398 Jy/beam
! Clean residual mean=0.000008 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.0428366 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 128 components and 0.0428366 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=23.68 mas, bmaj=29.34 mas, bpa=14.96 degrees
! Estimated noise=2.33074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000753365 Jy
! Component: 100  -  total flux cleaned = 0.00132588 Jy
! Component: 150  -  total flux cleaned = 0.00179556 Jy
! Component: 200  -  total flux cleaned = 0.0021956 Jy
! Total flux subtracted in 200 components = 0.0021956 Jy
! Clean residual min=-0.000711 max=0.001049 Jy/beam
! Clean residual mean=0.000008 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.0450322 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000348397 Jy
! Component: 100  -  total flux cleaned = 0.000664447 Jy
! Component: 150  -  total flux cleaned = 0.000869104 Jy
! Component: 200  -  total flux cleaned = 0.00103392 Jy
! Total flux subtracted in 200 components = 0.00103392 Jy
! Clean residual min=-0.000665 max=0.000970 Jy/beam
! Clean residual mean=0.000006 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.0460661 Jy
! Adding 144 model components to the UV plane model.
! The established model now contains 258 components and 0.0460661 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=23.43 mas, bmaj=29.3 mas, bpa=15.19 degrees
! Estimated noise=2.33243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000154831 Jy
! Component: 100  -  total flux cleaned = 0.00025804 Jy
! Component: 150  -  total flux cleaned = 0.000369371 Jy
! Component: 200  -  total flux cleaned = 0.000491038 Jy
! Total flux subtracted in 200 components = 0.000491038 Jy
! Clean residual min=-0.000684 max=0.000945 Jy/beam
! Clean residual mean=0.000007 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.0465571 Jy
selfcal
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 285 components and 0.0465571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.032481Jy  sigma=0.371619
! Fit after  self-cal, rms=0.032299Jy  sigma=0.369200
wmodel J1743+1326_S_a_map.mod
! Writing 285 model components to file: J1743+1326_S_a_map.mod
wobs   J1743+1326_S_a_uvs.fits
! Writing UV FITS file: J1743+1326_S_a_uvs.fits
wwins  J1743+1326_S_a_map.win
! wwins: Wrote 2 windows to J1743+1326_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00013994 Jy
! Component: 100  -  total flux cleaned = -0.000202998 Jy
! Component: 150  -  total flux cleaned = -0.000224557 Jy
! Component: 200  -  total flux cleaned = -0.000253241 Jy
! Component: 250  -  total flux cleaned = -0.000281673 Jy
! Component: 300  -  total flux cleaned = -0.000309985 Jy
! Component: 350  -  total flux cleaned = -0.000324106 Jy
! Component: 400  -  total flux cleaned = -0.000331302 Jy
! Component: 450  -  total flux cleaned = -0.000338728 Jy
! Component: 500  -  total flux cleaned = -0.000346601 Jy
! Component: 550  -  total flux cleaned = -0.000329647 Jy
! Component: 600  -  total flux cleaned = -0.000310807 Jy
! Component: 650  -  total flux cleaned = -0.000300378 Jy
! Component: 700  -  total flux cleaned = -0.000322363 Jy
! Component: 750  -  total flux cleaned = -0.000370469 Jy
! Component: 800  -  total flux cleaned = -0.000410764 Jy
! Component: 850  -  total flux cleaned = -0.000470762 Jy
! Component: 900  -  total flux cleaned = -0.00052073 Jy
! Component: 950  -  total flux cleaned = -0.000595574 Jy
! Component: 1000  -  total flux cleaned = -0.000658225 Jy
! Component: 1050  -  total flux cleaned = -0.000751604 Jy
! Component: 1100  -  total flux cleaned = -0.000830718 Jy
! Component: 1150  -  total flux cleaned = -0.000917539 Jy
! Component: 1200  -  total flux cleaned = -0.00104719 Jy
! Component: 1250  -  total flux cleaned = -0.0011558 Jy
! Component: 1300  -  total flux cleaned = -0.00127626 Jy
! Component: 1350  -  total flux cleaned = -0.00145573 Jy
! Component: 1400  -  total flux cleaned = -0.00160632 Jy
! Component: 1450  -  total flux cleaned = -0.00177335 Jy
! Component: 1500  -  total flux cleaned = -0.00202288 Jy
! Component: 1550  -  total flux cleaned = -0.00223126 Jy
! Component: 1600  -  total flux cleaned = -0.00254334 Jy
! Component: 1650  -  total flux cleaned = -0.00280793 Jy
! Component: 1700  -  total flux cleaned = -0.00320043 Jy
! Component: 1750  -  total flux cleaned = -0.0035313 Jy
! Component: 1800  -  total flux cleaned = -0.00389443 Jy
! Component: 1850  -  total flux cleaned = -0.00430024 Jy
! Component: 1900  -  total flux cleaned = -0.00475312 Jy
! Component: 1950  -  total flux cleaned = -0.00526325 Jy
! Component: 2000  -  total flux cleaned = -0.00583059 Jy
! Component: 2050  -  total flux cleaned = -0.00646753 Jy
! Component: 2100  -  total flux cleaned = -0.00717606 Jy
! Component: 2150  -  total flux cleaned = -0.00796385 Jy
! Component: 2200  -  total flux cleaned = -0.00884269 Jy
! Component: 2250  -  total flux cleaned = -0.009821 Jy
! Component: 2300  -  total flux cleaned = -0.0109121 Jy
! Component: 2350  -  total flux cleaned = -0.0121286 Jy
! Component: 2400  -  total flux cleaned = -0.0134727 Jy
! Component: 2450  -  total flux cleaned = -0.0155035 Jy
! Component: 2500  -  total flux cleaned = -0.0166325 Jy
! Component: 2550  -  total flux cleaned = -0.0191686 Jy
! Component: 2600  -  total flux cleaned = -0.02129 Jy
! Component: 2650  -  total flux cleaned = -0.023664 Jy
! Component: 2700  -  total flux cleaned = -0.0263135 Jy
! Component: 2750  -  total flux cleaned = -0.0292943 Jy
! Component: 2800  -  total flux cleaned = -0.0336962 Jy
! Component: 2850  -  total flux cleaned = -0.0362168 Jy
! Component: 2900  -  total flux cleaned = -0.0416713 Jy
! Component: 2950  -  total flux cleaned = -0.044742 Jy
! Component: 3000  -  total flux cleaned = -0.0515386 Jy
! Component: 3050  -  total flux cleaned = -0.0554098 Jy
! Component: 3100  -  total flux cleaned = -0.0638426 Jy
! Component: 3150  -  total flux cleaned = -0.0710607 Jy
! Component: 3200  -  total flux cleaned = -0.0763294 Jy
! Component: 3250  -  total flux cleaned = -0.0880979 Jy
! Component: 3300  -  total flux cleaned = -0.0979482 Jy
! Component: 3350  -  total flux cleaned = -0.109155 Jy
! Component: 3400  -  total flux cleaned = -0.121295 Jy
! Component: 3450  -  total flux cleaned = -0.134882 Jy
! Component: 3500  -  total flux cleaned = -0.155472 Jy
! Component: 3550  -  total flux cleaned = -0.167081 Jy
! Component: 3600  -  total flux cleaned = -0.192705 Jy
! Component: 3650  -  total flux cleaned = -0.207182 Jy
! Component: 3700  -  total flux cleaned = -0.238697 Jy
! Component: 3750  -  total flux cleaned = -0.265549 Jy
! Component: 3800  -  total flux cleaned = -0.295535 Jy
! Component: 3850  -  total flux cleaned = -0.328256 Jy
! Component: 3900  -  total flux cleaned = -0.365149 Jy
! Component: 3950  -  total flux cleaned = -0.406348 Jy
! Component: 4000  -  total flux cleaned = -0.452118 Jy
! Component: 4050  -  total flux cleaned = -0.50264 Jy
! Total flux subtracted in 4096 components = -0.559493 Jy
! Clean residual min=-1.032520 max=1.120276 Jy/beam
! Clean residual mean=0.016806 rms=0.326691 Jy/beam
! Combined flux in latest and established models = -0.512936 Jy
keep
! Adding 77 model components to the UV plane model.
! The established model now contains 362 components and -0.512936 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1743+1326_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 23.43 x 29.3 at 15.19 degrees (North through East)
! Clean map  min=-1.6254  max=1.445 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1743+1326_S_a_map.fits
wmodel /image_prod/ug002_uva//J1743+1326_S_a_map.mod
! Writing 362 model components to file: /image_prod/ug002_uva//J1743+1326_S_a_map.mod
wobs   /image_prod/ug002_uva//J1743+1326_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1743+1326_S_a_uvs.fits
wwins  /image_prod/ug002_uva//J1743+1326_S_a_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J1743+1326_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.44498 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.358705 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -74.4729 74.4729
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       1.0761 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.444 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  4.028 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1743+1326_S_a_dfm.log closed on Thu Mar  5 03:21:38 2020