! Started logfile: /image_prod/ug002_uva//J1742-1517_S_dfm.log on Thu Mar  5 03:21:16 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1742-1517_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1742-1517_S_uva.fits
! AN table 1: 50 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.673333 visibilities/baseline/integration-bin.
! Found source: J1742-1517
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 3636 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1742-1517_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 83 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.997577Jy  sigma=6.669371
! Fit after  self-cal, rms=0.903597Jy  sigma=6.020237
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.508 mas, bmaj=6.429 mas, bpa=-2.886 degrees
! Estimated noise=2.59746 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0785258 Jy
! Component: 100  -  total flux cleaned = 0.0962977 Jy
! Total flux subtracted in 100 components = 0.0962977 Jy
! Clean residual min=-0.017072 max=0.033586 Jy/beam
! Clean residual mean=-0.000148 rms=0.005227 Jy/beam
! Combined flux in latest and established models = 0.0962977 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0962977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116194Jy  sigma=0.715226
! Fit after  self-cal, rms=0.115750Jy  sigma=0.712279
! Inverting map 
! Added new window around map position (-4.5, 40).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0345148 Jy
! Component: 100  -  total flux cleaned = 0.0536505 Jy
! Total flux subtracted in 100 components = 0.0536505 Jy
! Clean residual min=-0.012010 max=0.016965 Jy/beam
! Clean residual mean=-0.000111 rms=0.003400 Jy/beam
! Combined flux in latest and established models = 0.149948 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 21 components and 0.149948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102210Jy  sigma=0.606448
! Fit after  self-cal, rms=0.097533Jy  sigma=0.573755
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0205763 Jy
! Component: 100  -  total flux cleaned = 0.0329598 Jy
! Total flux subtracted in 100 components = 0.0329598 Jy
! Clean residual min=-0.008327 max=0.013014 Jy/beam
! Clean residual mean=-0.000079 rms=0.002578 Jy/beam
! Combined flux in latest and established models = 0.182908 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 28 components and 0.182908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091355Jy  sigma=0.520793
! Fit after  self-cal, rms=0.090552Jy  sigma=0.515955
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.009 mas, bmaj=7.481 mas, bpa=-3.658 degrees
! Estimated noise=1.8244 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0167582 Jy
! Component: 100  -  total flux cleaned = 0.0267808 Jy
! Component: 150  -  total flux cleaned = 0.0341066 Jy
! Component: 200  -  total flux cleaned = 0.039635 Jy
! Total flux subtracted in 200 components = 0.039635 Jy
! Clean residual min=-0.007231 max=0.011876 Jy/beam
! Clean residual mean=-0.000080 rms=0.002465 Jy/beam
! Combined flux in latest and established models = 0.222543 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 51 components and 0.222543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087219Jy  sigma=0.483354
! Fit after  self-cal, rms=0.086920Jy  sigma=0.481343
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.009 x 7.481 at -3.658 degrees (North through East)
! Clean map  min=-0.0072234  max=0.10542 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        1.13     KP        0.93     LA        0.90     
!   MK        1.13     NL        0.93     OV        0.99     PT        0.91     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.60     HN        1.16     KP        0.94     LA        0.93     
!   MK        1.05     NL        0.92     OV        0.99     PT        0.92     
!   SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.24     HN        1.08     KP        0.95     LA        0.88     
!   MK        1.03     NL        0.93     OV        0.96     PT        0.91     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.086920Jy  sigma=0.481343
! Fit after  self-cal, rms=0.095075Jy  sigma=0.462261
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.077 mas, bmaj=7.662 mas, bpa=-3.416 degrees
! Estimated noise=1.80638 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00073161 Jy
! Component: 100  -  total flux cleaned = 0.000465076 Jy
! Component: 150  -  total flux cleaned = 0.000295709 Jy
! Component: 200  -  total flux cleaned = 0.000348977 Jy
! Total flux subtracted in 200 components = 0.000348977 Jy
! Clean residual min=-0.005906 max=0.006916 Jy/beam
! Clean residual mean=-0.000009 rms=0.001591 Jy/beam
! Combined flux in latest and established models = 0.222892 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 65 components and 0.222892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094860Jy  sigma=0.461191
! Fit after  self-cal, rms=0.095135Jy  sigma=0.460719
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095135Jy  sigma=0.460719
! Fit after  self-cal, rms=0.087514Jy  sigma=0.456880
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.098 mas, bmaj=7.665 mas, bpa=-3.742 degrees
! Estimated noise=1.81142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00129423 Jy
! Component: 100  -  total flux cleaned = -0.00172966 Jy
! Component: 150  -  total flux cleaned = -0.00201433 Jy
! Component: 200  -  total flux cleaned = -0.0020515 Jy
! Total flux subtracted in 200 components = -0.0020515 Jy
! Clean residual min=-0.005119 max=0.005660 Jy/beam
! Clean residual mean=-0.000011 rms=0.001396 Jy/beam
! Combined flux in latest and established models = 0.22084 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 73 components and 0.22084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087457Jy  sigma=0.456406
! Fit after  self-cal, rms=0.087419Jy  sigma=0.456291
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000126818 Jy
! Component: 100  -  total flux cleaned = -0.000164727 Jy
! Component: 150  -  total flux cleaned = -0.000132211 Jy
! Component: 200  -  total flux cleaned = -0.000132201 Jy
! Total flux subtracted in 200 components = -0.000132201 Jy
! Clean residual min=-0.005123 max=0.005606 Jy/beam
! Clean residual mean=-0.000011 rms=0.001382 Jy/beam
! Combined flux in latest and established models = 0.220708 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 79 components and 0.220708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087392Jy  sigma=0.456078
! Fit after  self-cal, rms=0.087388Jy  sigma=0.456066
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087388Jy  sigma=0.456066
! Fit after  self-cal, rms=0.087323Jy  sigma=0.455974
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.116 mas, bmaj=7.698 mas, bpa=-3.69 degrees
! Estimated noise=1.80817 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00134823 Jy
! Component: 100  -  total flux cleaned = -0.00174014 Jy
! Component: 150  -  total flux cleaned = -0.0018754 Jy
! Component: 200  -  total flux cleaned = -0.00196781 Jy
! Total flux subtracted in 200 components = -0.00196781 Jy
! Clean residual min=-0.005048 max=0.005565 Jy/beam
! Clean residual mean=-0.000012 rms=0.001361 Jy/beam
! Combined flux in latest and established models = 0.21874 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 83 components and 0.21874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087280Jy  sigma=0.455783
! Fit after  self-cal, rms=0.087280Jy  sigma=0.455770
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.92738e-07 Jy
! Component: 100  -  total flux cleaned = -5.40434e-07 Jy
! Component: 150  -  total flux cleaned = 2.90985e-05 Jy
! Component: 200  -  total flux cleaned = 8.51361e-05 Jy
! Total flux subtracted in 200 components = 8.51361e-05 Jy
! Clean residual min=-0.005013 max=0.005555 Jy/beam
! Clean residual mean=-0.000012 rms=0.001353 Jy/beam
! Combined flux in latest and established models = 0.218826 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 85 components and 0.218826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087260Jy  sigma=0.455632
! Fit after  self-cal, rms=0.087259Jy  sigma=0.455626
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087259Jy  sigma=0.455626
! Fit after  self-cal, rms=0.087408Jy  sigma=0.455557
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.244 mas, bmaj=16.15 mas, bpa=1.12 degrees
! Estimated noise=2.16473 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000462447 Jy
! Component: 100  -  total flux cleaned = -0.000614383 Jy
! Component: 150  -  total flux cleaned = -0.000733583 Jy
! Component: 200  -  total flux cleaned = -0.000880659 Jy
! Total flux subtracted in 200 components = -0.000880659 Jy
! Clean residual min=-0.005611 max=0.006914 Jy/beam
! Clean residual mean=-0.000022 rms=0.001837 Jy/beam
! Combined flux in latest and established models = 0.217945 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 87 components and 0.217945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087485Jy  sigma=0.455306
! Fit after  self-cal, rms=0.087478Jy  sigma=0.455260
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.95518e-05 Jy
! Component: 100  -  total flux cleaned = -6.92701e-05 Jy
! Component: 150  -  total flux cleaned = -0.000103635 Jy
! Component: 200  -  total flux cleaned = -0.00010301 Jy
! Total flux subtracted in 200 components = -0.00010301 Jy
! Clean residual min=-0.005477 max=0.006706 Jy/beam
! Clean residual mean=-0.000021 rms=0.001782 Jy/beam
! Combined flux in latest and established models = 0.217842 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 88 components and 0.217842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087519Jy  sigma=0.455233
! Fit after  self-cal, rms=0.087519Jy  sigma=0.455225
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.133 mas, bmaj=7.73 mas, bpa=-3.656 degrees
! Estimated noise=1.80631 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.133 x 7.73 at -3.656 degrees (North through East)
! Clean map  min=-0.004699  max=0.10451 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.593 mas, bmaj=6.537 mas, bpa=-2.755 degrees
! Estimated noise=2.64429 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0857313 Jy
! Component: 100  -  total flux cleaned = 0.125681 Jy
! Component: 150  -  total flux cleaned = 0.151306 Jy
! Component: 200  -  total flux cleaned = 0.169179 Jy
! Total flux subtracted in 200 components = 0.169179 Jy
! Clean residual min=-0.008000 max=0.012990 Jy/beam
! Clean residual mean=-0.000053 rms=0.002617 Jy/beam
! Combined flux in latest and established models = 0.169179 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.169179 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.133 mas, bmaj=7.73 mas, bpa=-3.656 degrees
! Estimated noise=1.80631 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5, 30.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0179559 Jy
! Component: 100  -  total flux cleaned = 0.0290044 Jy
! Component: 150  -  total flux cleaned = 0.03665 Jy
! Component: 200  -  total flux cleaned = 0.042132 Jy
! Total flux subtracted in 200 components = 0.042132 Jy
! Clean residual min=-0.004385 max=0.005087 Jy/beam
! Clean residual mean=-0.000020 rms=0.001270 Jy/beam
! Combined flux in latest and established models = 0.211311 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 87 components and 0.211311 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.244 mas, bmaj=16.15 mas, bpa=1.12 degrees
! Estimated noise=2.16473 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0058235 Jy
! Component: 100  -  total flux cleaned = 0.00896119 Jy
! Component: 150  -  total flux cleaned = 0.010139 Jy
! Component: 200  -  total flux cleaned = 0.0105803 Jy
! Total flux subtracted in 200 components = 0.0105803 Jy
! Clean residual min=-0.004758 max=0.004361 Jy/beam
! Clean residual mean=-0.000004 rms=0.001405 Jy/beam
! Combined flux in latest and established models = 0.221892 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000365146 Jy
! Component: 100  -  total flux cleaned = 0.000626367 Jy
! Component: 150  -  total flux cleaned = 0.000852344 Jy
! Component: 200  -  total flux cleaned = 0.00104629 Jy
! Total flux subtracted in 200 components = 0.00104629 Jy
! Clean residual min=-0.004722 max=0.004200 Jy/beam
! Clean residual mean=-0.000000 rms=0.001369 Jy/beam
! Combined flux in latest and established models = 0.222938 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 139 components and 0.222938 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.133 mas, bmaj=7.73 mas, bpa=-3.656 degrees
! Estimated noise=1.80631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000446596 Jy
! Component: 100  -  total flux cleaned = 0.000452221 Jy
! Component: 150  -  total flux cleaned = 0.000509036 Jy
! Component: 200  -  total flux cleaned = 0.000509489 Jy
! Total flux subtracted in 200 components = 0.000509489 Jy
! Clean residual min=-0.004028 max=0.003969 Jy/beam
! Clean residual mean=0.000001 rms=0.001002 Jy/beam
! Combined flux in latest and established models = 0.223447 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 160 components and 0.223447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087001Jy  sigma=0.451477
! Fit after  self-cal, rms=0.086843Jy  sigma=0.450965
wmodel J1742-1517_S_map.mod
! Writing 160 model components to file: J1742-1517_S_map.mod
wobs   J1742-1517_S_uvs.fits
! Writing UV FITS file: J1742-1517_S_uvs.fits
wwins  J1742-1517_S_map.win
! wwins: Wrote 3 windows to J1742-1517_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159729 Jy
! Component: 100  -  total flux cleaned = 0.00223393 Jy
! Component: 150  -  total flux cleaned = 0.00265115 Jy
! Component: 200  -  total flux cleaned = 0.00265378 Jy
! Component: 250  -  total flux cleaned = 0.00286767 Jy
! Component: 300  -  total flux cleaned = 0.00297016 Jy
! Component: 350  -  total flux cleaned = 0.00311599 Jy
! Component: 400  -  total flux cleaned = 0.00316233 Jy
! Component: 450  -  total flux cleaned = 0.00325244 Jy
! Component: 500  -  total flux cleaned = 0.00342528 Jy
! Component: 550  -  total flux cleaned = 0.00367572 Jy
! Component: 600  -  total flux cleaned = 0.00395793 Jy
! Component: 650  -  total flux cleaned = 0.00419028 Jy
! Component: 700  -  total flux cleaned = 0.00434085 Jy
! Component: 750  -  total flux cleaned = 0.0044881 Jy
! Component: 800  -  total flux cleaned = 0.00452326 Jy
! Component: 850  -  total flux cleaned = 0.00448766 Jy
! Component: 900  -  total flux cleaned = 0.00445373 Jy
! Component: 950  -  total flux cleaned = 0.00428829 Jy
! Component: 1000  -  total flux cleaned = 0.0042559 Jy
! Component: 1050  -  total flux cleaned = 0.00416058 Jy
! Component: 1100  -  total flux cleaned = 0.00412972 Jy
! Component: 1150  -  total flux cleaned = 0.00419014 Jy
! Component: 1200  -  total flux cleaned = 0.00424984 Jy
! Component: 1250  -  total flux cleaned = 0.00427896 Jy
! Component: 1300  -  total flux cleaned = 0.00436517 Jy
! Component: 1350  -  total flux cleaned = 0.00442122 Jy
! Component: 1400  -  total flux cleaned = 0.00439377 Jy
! Component: 1450  -  total flux cleaned = 0.00444835 Jy
! Component: 1500  -  total flux cleaned = 0.00442168 Jy
! Component: 1550  -  total flux cleaned = 0.00444828 Jy
! Component: 1600  -  total flux cleaned = 0.00442224 Jy
! Component: 1650  -  total flux cleaned = 0.00439649 Jy
! Component: 1700  -  total flux cleaned = 0.00442181 Jy
! Component: 1750  -  total flux cleaned = 0.00447195 Jy
! Component: 1800  -  total flux cleaned = 0.00447198 Jy
! Component: 1850  -  total flux cleaned = 0.00452067 Jy
! Component: 1900  -  total flux cleaned = 0.0045447 Jy
! Component: 1950  -  total flux cleaned = 0.00452117 Jy
! Component: 2000  -  total flux cleaned = 0.00456803 Jy
! Component: 2050  -  total flux cleaned = 0.00452172 Jy
! Component: 2100  -  total flux cleaned = 0.00454456 Jy
! Component: 2150  -  total flux cleaned = 0.00458957 Jy
! Component: 2200  -  total flux cleaned = 0.00454476 Jy
! Component: 2250  -  total flux cleaned = 0.00450059 Jy
! Component: 2300  -  total flux cleaned = 0.00443521 Jy
! Component: 2350  -  total flux cleaned = 0.00437058 Jy
! Component: 2400  -  total flux cleaned = 0.00432804 Jy
! Component: 2450  -  total flux cleaned = 0.00430689 Jy
! Component: 2500  -  total flux cleaned = 0.00432776 Jy
! Component: 2550  -  total flux cleaned = 0.0043277 Jy
! Component: 2600  -  total flux cleaned = 0.0043686 Jy
! Component: 2650  -  total flux cleaned = 0.00432819 Jy
! Component: 2700  -  total flux cleaned = 0.00432831 Jy
! Component: 2750  -  total flux cleaned = 0.00430863 Jy
! Component: 2800  -  total flux cleaned = 0.00428903 Jy
! Component: 2850  -  total flux cleaned = 0.00428923 Jy
! Component: 2900  -  total flux cleaned = 0.00425039 Jy
! Component: 2950  -  total flux cleaned = 0.00426952 Jy
! Component: 3000  -  total flux cleaned = 0.00417414 Jy
! Component: 3050  -  total flux cleaned = 0.00411759 Jy
! Component: 3100  -  total flux cleaned = 0.00406132 Jy
! Component: 3150  -  total flux cleaned = 0.00406155 Jy
! Component: 3200  -  total flux cleaned = 0.00406154 Jy
! Component: 3250  -  total flux cleaned = 0.00398818 Jy
! Component: 3300  -  total flux cleaned = 0.00396987 Jy
! Component: 3350  -  total flux cleaned = 0.00387967 Jy
! Component: 3400  -  total flux cleaned = 0.00384372 Jy
! Component: 3450  -  total flux cleaned = 0.00380849 Jy
! Component: 3500  -  total flux cleaned = 0.00375565 Jy
! Component: 3550  -  total flux cleaned = 0.00372073 Jy
! Component: 3600  -  total flux cleaned = 0.00370324 Jy
! Component: 3650  -  total flux cleaned = 0.00361683 Jy
! Component: 3700  -  total flux cleaned = 0.00358261 Jy
! Component: 3750  -  total flux cleaned = 0.00353142 Jy
! Component: 3800  -  total flux cleaned = 0.00344692 Jy
! Component: 3850  -  total flux cleaned = 0.00339651 Jy
! Component: 3900  -  total flux cleaned = 0.00334647 Jy
! Component: 3950  -  total flux cleaned = 0.00332985 Jy
! Component: 4000  -  total flux cleaned = 0.00324719 Jy
! Component: 4050  -  total flux cleaned = 0.00318157 Jy
! Total flux subtracted in 4096 components = 0.00310001 Jy
! Clean residual min=-0.000952 max=0.000992 Jy/beam
! Clean residual mean=0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.226547 Jy
keep
! Adding 264 model components to the UV plane model.
! The established model now contains 424 components and 0.226548 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1742-1517_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.133 x 7.73 at -3.656 degrees (North through East)
! Clean map  min=-0.0021585  max=0.10286 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1742-1517_S_map.fits
wmodel /image_prod/ug002_uva//J1742-1517_S_map.mod
! Writing 424 model components to file: /image_prod/ug002_uva//J1742-1517_S_map.mod
wobs   /image_prod/ug002_uva//J1742-1517_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1742-1517_S_uvs.fits
wwins  /image_prod/ug002_uva//J1742-1517_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1742-1517_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.102863 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000271478 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.791763 0.791763 1.58353 3.16705 6.3341 12.6682 25.3364 50.6728
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.102 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  378.901 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1742-1517_S_dfm.log closed on Thu Mar  5 03:21:19 2020