! Started logfile: /image_prod/ug002_uva//J1737+0621_S_dfm.log on Thu Mar  5 03:19:08 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1737+0621_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1737+0621_S_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.714815 visibilities/baseline/integration-bin.
! Found source: J1737+0621
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4632 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1737+0621_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 85 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 85 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 85 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.140344Jy  sigma=7.176897
! Fit after  self-cal, rms=0.667377Jy  sigma=4.449470
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.568 mas, bmaj=6.226 mas, bpa=-4.106 degrees
! Estimated noise=2.29962 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.271163 Jy
! Component: 100  -  total flux cleaned = 0.3914 Jy
! Total flux subtracted in 100 components = 0.3914 Jy
! Clean residual min=-0.040402 max=0.143174 Jy/beam
! Clean residual mean=-0.000130 rms=0.013534 Jy/beam
! Combined flux in latest and established models = 0.3914 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.3914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.263221Jy  sigma=1.392892
! Fit after  self-cal, rms=0.261885Jy  sigma=1.386640
! Inverting map 
! Added new window around map position (3.5, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.123086 Jy
! Component: 100  -  total flux cleaned = 0.188891 Jy
! Total flux subtracted in 100 components = 0.188891 Jy
! Clean residual min=-0.029040 max=0.063787 Jy/beam
! Clean residual mean=-0.000075 rms=0.007013 Jy/beam
! Combined flux in latest and established models = 0.58029 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 24 components and 0.580291 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.177101Jy  sigma=0.827913
! Fit after  self-cal, rms=0.171392Jy  sigma=0.777632
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0505547 Jy
! Component: 100  -  total flux cleaned = 0.077111 Jy
! Total flux subtracted in 100 components = 0.077111 Jy
! Clean residual min=-0.020465 max=0.033969 Jy/beam
! Clean residual mean=-0.000052 rms=0.004375 Jy/beam
! Combined flux in latest and established models = 0.657402 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 34 components and 0.657402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.148910Jy  sigma=0.628932
! Fit after  self-cal, rms=0.147498Jy  sigma=0.612235
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.879 mas, bmaj=6.855 mas, bpa=-5.214 degrees
! Estimated noise=1.68207 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.02921 Jy
! Component: 100  -  total flux cleaned = 0.044852 Jy
! Component: 150  -  total flux cleaned = 0.0549527 Jy
! Component: 200  -  total flux cleaned = 0.0621419 Jy
! Total flux subtracted in 200 components = 0.0621419 Jy
! Clean residual min=-0.016240 max=0.020184 Jy/beam
! Clean residual mean=-0.000061 rms=0.003780 Jy/beam
! Combined flux in latest and established models = 0.719544 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 54 components and 0.719544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.138553Jy  sigma=0.565932
! Fit after  self-cal, rms=0.138061Jy  sigma=0.558459
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.879 x 6.855 at -5.214 degrees (North through East)
! Clean map  min=-0.014365  max=0.36595 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     HN        1.01     KP        0.99     LA        0.99     
!   MK        1.02     NL        0.97     OV        1.00     PT        1.00     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     HN        1.00     KP        0.97     LA        1.04     
!   MK        1.03     NL        1.00     OV        1.02     PT        0.99     
!   SC        1.14     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        1.08     KP        0.97     LA        0.98     
!   MK        0.96     NL        0.98     OV        1.03     PT        1.03     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.138061Jy  sigma=0.558459
! Fit after  self-cal, rms=0.121206Jy  sigma=0.540880
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.889 mas, bmaj=6.845 mas, bpa=-5.21 degrees
! Estimated noise=1.67953 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00248236 Jy
! Component: 100  -  total flux cleaned = 0.00382553 Jy
! Component: 150  -  total flux cleaned = 0.00415932 Jy
! Component: 200  -  total flux cleaned = 0.00416537 Jy
! Total flux subtracted in 200 components = 0.00416537 Jy
! Clean residual min=-0.014394 max=0.015348 Jy/beam
! Clean residual mean=-0.000052 rms=0.003402 Jy/beam
! Combined flux in latest and established models = 0.723709 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 69 components and 0.723709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.120287Jy  sigma=0.533625
! Fit after  self-cal, rms=0.120157Jy  sigma=0.531212
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.120157Jy  sigma=0.531212
! Fit after  self-cal, rms=0.088835Jy  sigma=0.442695
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.871 mas, bmaj=6.763 mas, bpa=-5.029 degrees
! Estimated noise=1.68802 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000584127 Jy
! Component: 100  -  total flux cleaned = 0.000414261 Jy
! Component: 150  -  total flux cleaned = -7.15075e-05 Jy
! Component: 200  -  total flux cleaned = -0.000735233 Jy
! Total flux subtracted in 200 components = -0.000735233 Jy
! Clean residual min=-0.006759 max=0.008319 Jy/beam
! Clean residual mean=-0.000016 rms=0.001849 Jy/beam
! Combined flux in latest and established models = 0.722974 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 80 components and 0.722974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087999Jy  sigma=0.435061
! Fit after  self-cal, rms=0.087970Jy  sigma=0.433858
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00053669 Jy
! Component: 100  -  total flux cleaned = 0.000515366 Jy
! Component: 150  -  total flux cleaned = 0.000409048 Jy
! Component: 200  -  total flux cleaned = 0.000409068 Jy
! Total flux subtracted in 200 components = 0.000409068 Jy
! Clean residual min=-0.006686 max=0.007253 Jy/beam
! Clean residual mean=-0.000015 rms=0.001765 Jy/beam
! Combined flux in latest and established models = 0.723383 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 89 components and 0.723383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087604Jy  sigma=0.430993
! Fit after  self-cal, rms=0.087566Jy  sigma=0.430393
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087566Jy  sigma=0.430393
! Fit after  self-cal, rms=0.085244Jy  sigma=0.423143
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.867 mas, bmaj=6.739 mas, bpa=-4.934 degrees
! Estimated noise=1.67898 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.6258e-05 Jy
! Component: 100  -  total flux cleaned = -0.000309836 Jy
! Component: 150  -  total flux cleaned = -0.000573258 Jy
! Component: 200  -  total flux cleaned = -0.00081341 Jy
! Total flux subtracted in 200 components = -0.00081341 Jy
! Clean residual min=-0.005490 max=0.006577 Jy/beam
! Clean residual mean=-0.000009 rms=0.001527 Jy/beam
! Combined flux in latest and established models = 0.722569 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 94 components and 0.722569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084894Jy  sigma=0.420558
! Fit after  self-cal, rms=0.084866Jy  sigma=0.420014
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000113797 Jy
! Component: 100  -  total flux cleaned = 0.000106643 Jy
! Component: 150  -  total flux cleaned = 0.00011371 Jy
! Component: 200  -  total flux cleaned = -7.96391e-05 Jy
! Total flux subtracted in 200 components = -7.96391e-05 Jy
! Clean residual min=-0.005200 max=0.006110 Jy/beam
! Clean residual mean=-0.000009 rms=0.001481 Jy/beam
! Combined flux in latest and established models = 0.72249 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 99 components and 0.72249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084664Jy  sigma=0.418759
! Fit after  self-cal, rms=0.084644Jy  sigma=0.418381
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084644Jy  sigma=0.418381
! Fit after  self-cal, rms=0.084247Jy  sigma=0.418009
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.645 mas, bmaj=11.16 mas, bpa=-2.389 degrees
! Estimated noise=2.3705 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00345855 Jy
! Component: 100  -  total flux cleaned = 0.00413397 Jy
! Component: 150  -  total flux cleaned = 0.00452832 Jy
! Component: 200  -  total flux cleaned = 0.00489239 Jy
! Total flux subtracted in 200 components = 0.00489239 Jy
! Clean residual min=-0.006081 max=0.008005 Jy/beam
! Clean residual mean=-0.000008 rms=0.002126 Jy/beam
! Combined flux in latest and established models = 0.727382 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 107 components and 0.727382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084155Jy  sigma=0.417460
! Fit after  self-cal, rms=0.084138Jy  sigma=0.417122
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000266445 Jy
! Component: 100  -  total flux cleaned = -0.000134122 Jy
! Component: 150  -  total flux cleaned = 8.51082e-05 Jy
! Component: 200  -  total flux cleaned = 0.000268865 Jy
! Total flux subtracted in 200 components = 0.000268865 Jy
! Clean residual min=-0.006028 max=0.007956 Jy/beam
! Clean residual mean=-0.000007 rms=0.002089 Jy/beam
! Combined flux in latest and established models = 0.727651 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 114 components and 0.727651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084103Jy  sigma=0.417170
! Fit after  self-cal, rms=0.084096Jy  sigma=0.416979
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.869 mas, bmaj=6.726 mas, bpa=-4.729 degrees
! Estimated noise=1.67727 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.869 x 6.726 at -4.729 degrees (North through East)
! Clean map  min=-0.0052065  max=0.35963 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.557 mas, bmaj=6.105 mas, bpa=-3.6 degrees
! Estimated noise=2.28418 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.287648 Jy
! Component: 100  -  total flux cleaned = 0.435803 Jy
! Component: 150  -  total flux cleaned = 0.526522 Jy
! Component: 200  -  total flux cleaned = 0.584901 Jy
! Total flux subtracted in 200 components = 0.584901 Jy
! Clean residual min=-0.012574 max=0.030969 Jy/beam
! Clean residual mean=-0.000048 rms=0.004492 Jy/beam
! Combined flux in latest and established models = 0.584901 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.584901 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.869 mas, bmaj=6.726 mas, bpa=-4.729 degrees
! Estimated noise=1.67727 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0488259 Jy
! Component: 100  -  total flux cleaned = 0.0779551 Jy
! Component: 150  -  total flux cleaned = 0.0965195 Jy
! Component: 200  -  total flux cleaned = 0.108801 Jy
! Total flux subtracted in 200 components = 0.108801 Jy
! Clean residual min=-0.005959 max=0.009308 Jy/beam
! Clean residual mean=-0.000025 rms=0.001815 Jy/beam
! Combined flux in latest and established models = 0.693702 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 52 components and 0.693702 Jy
! Inverting map 
! Added new window around map position (-3.5, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00955545 Jy
! Component: 100  -  total flux cleaned = 0.0163285 Jy
! Component: 150  -  total flux cleaned = 0.0203964 Jy
! Component: 200  -  total flux cleaned = 0.0234867 Jy
! Total flux subtracted in 200 components = 0.0234867 Jy
! Clean residual min=-0.005025 max=0.005898 Jy/beam
! Clean residual mean=-0.000010 rms=0.001362 Jy/beam
! Combined flux in latest and established models = 0.717189 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 79 components and 0.717189 Jy
! Inverting map 
! Added new window around map position (58.5, -56.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00452296 Jy
! Component: 100  -  total flux cleaned = 0.00622225 Jy
! Component: 150  -  total flux cleaned = 0.00746391 Jy
! Component: 200  -  total flux cleaned = 0.00845919 Jy
! Total flux subtracted in 200 components = 0.00845919 Jy
! Clean residual min=-0.004490 max=0.005117 Jy/beam
! Clean residual mean=-0.000006 rms=0.001222 Jy/beam
! Combined flux in latest and established models = 0.725648 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 95 components and 0.725648 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.645 mas, bmaj=11.16 mas, bpa=-2.389 degrees
! Estimated noise=2.3705 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00423727 Jy
! Component: 100  -  total flux cleaned = 0.00488336 Jy
! Component: 150  -  total flux cleaned = 0.00532203 Jy
! Component: 200  -  total flux cleaned = 0.0054177 Jy
! Total flux subtracted in 200 components = 0.0054177 Jy
! Clean residual min=-0.005659 max=0.006096 Jy/beam
! Clean residual mean=-0.000001 rms=0.001804 Jy/beam
! Combined flux in latest and established models = 0.731066 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.29522e-05 Jy
! Component: 100  -  total flux cleaned = 8.75841e-05 Jy
! Component: 150  -  total flux cleaned = 8.98302e-05 Jy
! Component: 200  -  total flux cleaned = 2.97339e-05 Jy
! Total flux subtracted in 200 components = 2.97339e-05 Jy
! Clean residual min=-0.005572 max=0.006067 Jy/beam
! Clean residual mean=0.000002 rms=0.001753 Jy/beam
! Combined flux in latest and established models = 0.731095 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 126 components and 0.731095 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.869 mas, bmaj=6.726 mas, bpa=-4.729 degrees
! Estimated noise=1.67727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00256947 Jy
! Component: 100  -  total flux cleaned = -0.00337191 Jy
! Component: 150  -  total flux cleaned = -0.00309962 Jy
! Component: 200  -  total flux cleaned = -0.00285261 Jy
! Total flux subtracted in 200 components = -0.00285261 Jy
! Clean residual min=-0.004513 max=0.004757 Jy/beam
! Clean residual mean=-0.000002 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.728243 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 146 components and 0.728243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082749Jy  sigma=0.409042
! Fit after  self-cal, rms=0.082610Jy  sigma=0.408142
wmodel J1737+0621_S_map.mod
! Writing 146 model components to file: J1737+0621_S_map.mod
wobs   J1737+0621_S_uvs.fits
! Writing UV FITS file: J1737+0621_S_uvs.fits
wwins  J1737+0621_S_map.win
! wwins: Wrote 4 windows to J1737+0621_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000669143 Jy
! Component: 100  -  total flux cleaned = 0.00186831 Jy
! Component: 150  -  total flux cleaned = 0.00292936 Jy
! Component: 200  -  total flux cleaned = 0.00387881 Jy
! Component: 250  -  total flux cleaned = 0.00478871 Jy
! Component: 300  -  total flux cleaned = 0.00560334 Jy
! Component: 350  -  total flux cleaned = 0.00633019 Jy
! Component: 400  -  total flux cleaned = 0.00703756 Jy
! Component: 450  -  total flux cleaned = 0.00766682 Jy
! Component: 500  -  total flux cleaned = 0.00822109 Jy
! Component: 550  -  total flux cleaned = 0.00859855 Jy
! Component: 600  -  total flux cleaned = 0.00907217 Jy
! Component: 650  -  total flux cleaned = 0.00943109 Jy
! Component: 700  -  total flux cleaned = 0.00983186 Jy
! Component: 750  -  total flux cleaned = 0.0100267 Jy
! Component: 800  -  total flux cleaned = 0.010171 Jy
! Component: 850  -  total flux cleaned = 0.0103595 Jy
! Component: 900  -  total flux cleaned = 0.0104522 Jy
! Component: 950  -  total flux cleaned = 0.0107242 Jy
! Component: 1000  -  total flux cleaned = 0.0109457 Jy
! Component: 1050  -  total flux cleaned = 0.0109894 Jy
! Component: 1100  -  total flux cleaned = 0.01133 Jy
! Component: 1150  -  total flux cleaned = 0.0112463 Jy
! Component: 1200  -  total flux cleaned = 0.011494 Jy
! Component: 1250  -  total flux cleaned = 0.0116144 Jy
! Component: 1300  -  total flux cleaned = 0.0116549 Jy
! Component: 1350  -  total flux cleaned = 0.0118508 Jy
! Component: 1400  -  total flux cleaned = 0.0120427 Jy
! Component: 1450  -  total flux cleaned = 0.0122298 Jy
! Component: 1500  -  total flux cleaned = 0.0122285 Jy
! Component: 1550  -  total flux cleaned = 0.0123379 Jy
! Component: 1600  -  total flux cleaned = 0.0124095 Jy
! Component: 1650  -  total flux cleaned = 0.0124451 Jy
! Component: 1700  -  total flux cleaned = 0.0126888 Jy
! Component: 1750  -  total flux cleaned = 0.0126883 Jy
! Component: 1800  -  total flux cleaned = 0.012857 Jy
! Component: 1850  -  total flux cleaned = 0.012923 Jy
! Component: 1900  -  total flux cleaned = 0.0129892 Jy
! Component: 1950  -  total flux cleaned = 0.0130861 Jy
! Component: 2000  -  total flux cleaned = 0.0131814 Jy
! Component: 2050  -  total flux cleaned = 0.0131496 Jy
! Component: 2100  -  total flux cleaned = 0.0131806 Jy
! Component: 2150  -  total flux cleaned = 0.0130578 Jy
! Component: 2200  -  total flux cleaned = 0.0130579 Jy
! Component: 2250  -  total flux cleaned = 0.0131179 Jy
! Component: 2300  -  total flux cleaned = 0.0131476 Jy
! Component: 2350  -  total flux cleaned = 0.0132352 Jy
! Component: 2400  -  total flux cleaned = 0.0132055 Jy
! Component: 2450  -  total flux cleaned = 0.0131479 Jy
! Component: 2500  -  total flux cleaned = 0.0130623 Jy
! Component: 2550  -  total flux cleaned = 0.0129773 Jy
! Component: 2600  -  total flux cleaned = 0.0128101 Jy
! Component: 2650  -  total flux cleaned = 0.0127553 Jy
! Component: 2700  -  total flux cleaned = 0.0127552 Jy
! Component: 2750  -  total flux cleaned = 0.012647 Jy
! Component: 2800  -  total flux cleaned = 0.0125932 Jy
! Component: 2850  -  total flux cleaned = 0.0124868 Jy
! Component: 2900  -  total flux cleaned = 0.0124084 Jy
! Component: 2950  -  total flux cleaned = 0.0123049 Jy
! Component: 3000  -  total flux cleaned = 0.0122535 Jy
! Component: 3050  -  total flux cleaned = 0.0121513 Jy
! Component: 3100  -  total flux cleaned = 0.0120505 Jy
! Component: 3150  -  total flux cleaned = 0.0119504 Jy
! Component: 3200  -  total flux cleaned = 0.0119008 Jy
! Component: 3250  -  total flux cleaned = 0.0118274 Jy
! Component: 3300  -  total flux cleaned = 0.0117301 Jy
! Component: 3350  -  total flux cleaned = 0.0116577 Jy
! Component: 3400  -  total flux cleaned = 0.0114897 Jy
! Component: 3450  -  total flux cleaned = 0.0113945 Jy
! Component: 3500  -  total flux cleaned = 0.0113238 Jy
! Component: 3550  -  total flux cleaned = 0.0112301 Jy
! Component: 3600  -  total flux cleaned = 0.011114 Jy
! Component: 3650  -  total flux cleaned = 0.010999 Jy
! Component: 3700  -  total flux cleaned = 0.0108622 Jy
! Component: 3750  -  total flux cleaned = 0.0107942 Jy
! Component: 3800  -  total flux cleaned = 0.0107717 Jy
! Component: 3850  -  total flux cleaned = 0.0106826 Jy
! Component: 3900  -  total flux cleaned = 0.0106607 Jy
! Component: 3950  -  total flux cleaned = 0.0106169 Jy
! Component: 4000  -  total flux cleaned = 0.0105948 Jy
! Component: 4050  -  total flux cleaned = 0.01053 Jy
! Total flux subtracted in 4096 components = 0.0105085 Jy
! Clean residual min=-0.001259 max=0.001286 Jy/beam
! Clean residual mean=-0.000006 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.738751 Jy
keep
! Adding 320 model components to the UV plane model.
! The established model now contains 466 components and 0.738751 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1737+0621_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.869 x 6.726 at -4.729 degrees (North through East)
! Clean map  min=-0.005067  max=0.36289 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1737+0621_S_map.fits
wmodel /image_prod/ug002_uva//J1737+0621_S_map.mod
! Writing 466 model components to file: /image_prod/ug002_uva//J1737+0621_S_map.mod
wobs   /image_prod/ug002_uva//J1737+0621_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1737+0621_S_uvs.fits
wwins  /image_prod/ug002_uva//J1737+0621_S_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J1737+0621_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.362892 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00037989 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.314052 0.314052 0.628105 1.25621 2.51242 5.02484 10.0497 20.0993 40.1987 80.3974
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.362 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  955.254 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1737+0621_S_dfm.log closed on Thu Mar  5 03:19:12 2020