! Started logfile: /image_prod/ug002_uva//J1735+5049_X_dfm.log on Thu Mar 5 03:18:50 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1735+5049_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1735+5049_X_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.965926 visibilities/baseline/integration-bin. ! Found source: J1735+5049 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 31296 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1735+5049_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.141403Jy sigma=8.543409 ! Fit after self-cal, rms=0.541652Jy sigma=4.316091 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.825 mas, bmaj=0.99 mas, bpa=-19.4 degrees ! Estimated noise=1.0771 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.373657 Jy ! Component: 100 - total flux cleaned = 0.455863 Jy ! Total flux subtracted in 100 components = 0.455863 Jy ! Clean residual min=-0.033624 max=0.095938 Jy/beam ! Clean residual mean=-0.000184 rms=0.007623 Jy/beam ! Combined flux in latest and established models = 0.455863 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.455863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.218973Jy sigma=1.578893 ! Fit after self-cal, rms=0.218979Jy sigma=1.578800 ! Inverting map ! Added new window around map position (1, 3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0761098 Jy ! Component: 100 - total flux cleaned = 0.104806 Jy ! Total flux subtracted in 100 components = 0.104806 Jy ! Clean residual min=-0.028615 max=0.039777 Jy/beam ! Clean residual mean=-0.000209 rms=0.006484 Jy/beam ! Combined flux in latest and established models = 0.560668 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 12 components and 0.560668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.186997Jy sigma=1.402397 ! Fit after self-cal, rms=0.182657Jy sigma=1.367127 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.036 mas, bmaj=1.287 mas, bpa=-16.7 degrees ! Estimated noise=0.538399 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0304775 Jy ! Component: 100 - total flux cleaned = 0.0452536 Jy ! Component: 150 - total flux cleaned = 0.0537829 Jy ! Component: 200 - total flux cleaned = 0.0552591 Jy ! Total flux subtracted in 200 components = 0.0552591 Jy ! Clean residual min=-0.034195 max=0.045298 Jy/beam ! Clean residual mean=-0.000602 rms=0.008724 Jy/beam ! Combined flux in latest and established models = 0.615928 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.615928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.175002Jy sigma=1.348310 ! Fit after self-cal, rms=0.174196Jy sigma=1.341866 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.036 x 1.287 at -16.7 degrees (North through East) ! Clean map min=-0.032092 max=0.4635 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.04 HN 1.02 KP 0.93 ! LA 1.24 MK 1.03 NL 1.13 OV 0.86 ! PT 1.17 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.98 HN 1.00 KP 0.95 ! LA 1.24 MK 1.04 NL 1.12 OV 0.86 ! PT 1.22 SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.97 HN 0.99 KP 0.94 ! LA 1.22 MK 1.01 NL 1.11 OV 0.85 ! PT 1.25 SC 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.98 HN 1.00 KP 0.94 ! LA 1.27 MK 1.06 NL 1.12 OV 0.86 ! PT 1.17 SC 0.88 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.99 HN 0.97 KP 0.95 ! LA 1.24 MK 1.03 NL 1.08 OV 0.88 ! PT 1.19 SC 0.91 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.01 HN 1.00 KP 0.94 ! LA 1.21 MK 1.03 NL 1.10 OV 0.89 ! PT 1.13 SC 0.90 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.97 HN 0.98 KP 0.96 ! LA 1.26 MK 1.03 NL 1.10 OV 0.87 ! PT 1.19 SC 0.93 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.97 HN 0.99 KP 0.94 ! LA 1.21 MK 1.02 NL 1.11 OV 0.87 ! PT 1.20 SC 0.90 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.97 HN 0.98 KP 0.94 ! LA 1.21 MK 1.06 NL 1.11 OV 0.86 ! PT 1.20 SC 0.90 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 1.01 KP 0.92 ! LA 1.27 MK 1.05 NL 1.09 OV 0.87 ! PT 1.17 SC 0.92 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.94 HN 0.99 KP 0.94 ! LA 1.24 MK 1.00 NL 1.09 OV 0.87 ! PT 1.21 SC 0.91 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.94 HN 1.00 KP 0.94 ! LA 1.27 MK 1.02 NL 1.10 OV 0.87 ! PT 1.23 SC 0.89 ! ! ! Fit before self-cal, rms=0.174196Jy sigma=1.341866 ! Fit after self-cal, rms=0.184747Jy sigma=1.203923 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.027 mas, bmaj=1.257 mas, bpa=-14.12 degrees ! Estimated noise=0.541893 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.8, 35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425622 Jy ! Component: 100 - total flux cleaned = 0.0719205 Jy ! Component: 150 - total flux cleaned = 0.0941058 Jy ! Component: 200 - total flux cleaned = 0.111289 Jy ! Total flux subtracted in 200 components = 0.111289 Jy ! Clean residual min=-0.028690 max=0.032227 Jy/beam ! Clean residual mean=-0.000417 rms=0.006766 Jy/beam ! Combined flux in latest and established models = 0.727217 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 63 components and 0.727217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.167981Jy sigma=1.113570 ! Fit after self-cal, rms=0.166584Jy sigma=1.102387 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.166584Jy sigma=1.102387 ! Fit after self-cal, rms=0.084092Jy sigma=0.509362 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.021 mas, bmaj=1.257 mas, bpa=-13.47 degrees ! Estimated noise=0.552814 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00446908 Jy ! Component: 100 - total flux cleaned = -0.00485181 Jy ! Component: 150 - total flux cleaned = -0.00485515 Jy ! Component: 200 - total flux cleaned = -0.00559097 Jy ! Total flux subtracted in 200 components = -0.00559097 Jy ! Clean residual min=-0.006797 max=0.014159 Jy/beam ! Clean residual mean=0.000012 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.721626 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 90 components and 0.721626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080800Jy sigma=0.484197 ! Fit after self-cal, rms=0.080528Jy sigma=0.480151 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00695625 Jy ! Component: 100 - total flux cleaned = 0.00548228 Jy ! Component: 150 - total flux cleaned = 0.0045395 Jy ! Component: 200 - total flux cleaned = 0.00377174 Jy ! Total flux subtracted in 200 components = 0.00377174 Jy ! Clean residual min=-0.005417 max=0.006138 Jy/beam ! Clean residual mean=0.000002 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.725398 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 105 components and 0.725398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077851Jy sigma=0.458958 ! Fit after self-cal, rms=0.077557Jy sigma=0.457147 ! Inverting map ! Added new window around map position (21.8, -17.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201892 Jy ! Component: 100 - total flux cleaned = 0.0023919 Jy ! Component: 150 - total flux cleaned = 0.00192785 Jy ! Component: 200 - total flux cleaned = 0.00151046 Jy ! Total flux subtracted in 200 components = 0.00151046 Jy ! Clean residual min=-0.004867 max=0.005323 Jy/beam ! Clean residual mean=-0.000003 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.726908 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 122 components and 0.726908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076780Jy sigma=0.450435 ! Fit after self-cal, rms=0.076709Jy sigma=0.450063 ! Inverting map ! Added new window around map position (-2.6, -13.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176881 Jy ! Component: 100 - total flux cleaned = 0.00163143 Jy ! Component: 150 - total flux cleaned = 0.0013847 Jy ! Component: 200 - total flux cleaned = 0.00115478 Jy ! Total flux subtracted in 200 components = 0.00115478 Jy ! Clean residual min=-0.004738 max=0.005043 Jy/beam ! Clean residual mean=-0.000009 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.728063 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 138 components and 0.728063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076194Jy sigma=0.445723 ! Fit after self-cal, rms=0.076175Jy sigma=0.445501 ! Inverting map ! Added new window around map position (7.4, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496974 Jy ! Component: 100 - total flux cleaned = 0.00703753 Jy ! Component: 150 - total flux cleaned = 0.00736599 Jy ! Component: 200 - total flux cleaned = 0.00737285 Jy ! Total flux subtracted in 200 components = 0.00737285 Jy ! Clean residual min=-0.004307 max=0.004614 Jy/beam ! Clean residual mean=-0.000012 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.735436 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 151 components and 0.735436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075722Jy sigma=0.441572 ! Fit after self-cal, rms=0.075714Jy sigma=0.441405 ! Inverting map ! Added new window around map position (14, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00431419 Jy ! Component: 100 - total flux cleaned = 0.00603824 Jy ! Component: 150 - total flux cleaned = 0.00670996 Jy ! Component: 200 - total flux cleaned = 0.00680039 Jy ! Total flux subtracted in 200 components = 0.00680039 Jy ! Clean residual min=-0.004059 max=0.003954 Jy/beam ! Clean residual mean=-0.000010 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.742236 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 169 components and 0.742236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075368Jy sigma=0.438484 ! Fit after self-cal, rms=0.075356Jy sigma=0.438406 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075356Jy sigma=0.438406 ! Fit after self-cal, rms=0.075569Jy sigma=0.431460 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=1.252 mas, bpa=-13.76 degrees ! Estimated noise=0.551281 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00050214 Jy ! Component: 100 - total flux cleaned = -0.00111151 Jy ! Component: 150 - total flux cleaned = -0.00135934 Jy ! Component: 200 - total flux cleaned = -0.0015762 Jy ! Total flux subtracted in 200 components = -0.0015762 Jy ! Clean residual min=-0.003324 max=0.003508 Jy/beam ! Clean residual mean=0.000005 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.74066 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 176 components and 0.74066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074981Jy sigma=0.427222 ! Fit after self-cal, rms=0.074947Jy sigma=0.426859 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.8, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219788 Jy ! Component: 100 - total flux cleaned = 0.00273477 Jy ! Component: 150 - total flux cleaned = 0.00283111 Jy ! Component: 200 - total flux cleaned = 0.00292502 Jy ! Total flux subtracted in 200 components = 0.00292502 Jy ! Clean residual min=-0.003020 max=0.003047 Jy/beam ! Clean residual mean=0.000003 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.743585 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 187 components and 0.743585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074629Jy sigma=0.424381 ! Fit after self-cal, rms=0.074606Jy sigma=0.424240 ! Inverting map ! Added new window around map position (-11.4, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196823 Jy ! Component: 100 - total flux cleaned = 0.00205908 Jy ! Component: 150 - total flux cleaned = 0.00198812 Jy ! Component: 200 - total flux cleaned = 0.00184359 Jy ! Total flux subtracted in 200 components = 0.00184359 Jy ! Clean residual min=-0.002932 max=0.002757 Jy/beam ! Clean residual mean=0.000002 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.745429 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 200 components and 0.745429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074397Jy sigma=0.422429 ! Fit after self-cal, rms=0.074386Jy sigma=0.422356 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074386Jy sigma=0.422356 ! Fit after self-cal, rms=0.074804Jy sigma=0.421354 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.238 mas, bmaj=2.356 mas, bpa=-88.67 degrees ! Estimated noise=0.733204 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00198645 Jy ! Component: 100 - total flux cleaned = -0.00199383 Jy ! Component: 150 - total flux cleaned = -0.00199141 Jy ! Component: 200 - total flux cleaned = -0.00206617 Jy ! Total flux subtracted in 200 components = -0.00206617 Jy ! Clean residual min=-0.003377 max=0.003234 Jy/beam ! Clean residual mean=0.000006 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.743362 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 215 components and 0.743362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074630Jy sigma=0.420501 ! Fit after self-cal, rms=0.074609Jy sigma=0.420299 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000925745 Jy ! Component: 100 - total flux cleaned = -0.000993985 Jy ! Component: 150 - total flux cleaned = -0.001184 Jy ! Component: 200 - total flux cleaned = -0.00159164 Jy ! Total flux subtracted in 200 components = -0.00159164 Jy ! Clean residual min=-0.003303 max=0.003243 Jy/beam ! Clean residual mean=0.000002 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.741771 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 227 components and 0.741771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074554Jy sigma=0.420019 ! Fit after self-cal, rms=0.074546Jy sigma=0.419969 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.017 mas, bmaj=1.251 mas, bpa=-13.81 degrees ! Estimated noise=0.551114 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.017 x 1.251 at -13.81 degrees (North through East) ! Clean map min=-0.0026661 max=0.4676 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8174 mas, bmaj=0.9634 mas, bpa=-14.5 degrees ! Estimated noise=1.07566 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.373196 Jy ! Component: 100 - total flux cleaned = 0.495763 Jy ! Component: 150 - total flux cleaned = 0.553519 Jy ! Component: 200 - total flux cleaned = 0.58985 Jy ! Total flux subtracted in 200 components = 0.58985 Jy ! Clean residual min=-0.007770 max=0.020130 Jy/beam ! Clean residual mean=-0.000014 rms=0.002106 Jy/beam ! Combined flux in latest and established models = 0.58985 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.58985 Jy ! Inverting map and beam ! Estimated beam: bmin=1.017 mas, bmaj=1.251 mas, bpa=-13.81 degrees ! Estimated noise=0.551114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0375284 Jy ! Component: 100 - total flux cleaned = 0.0608625 Jy ! Component: 150 - total flux cleaned = 0.0762927 Jy ! Component: 200 - total flux cleaned = 0.0869746 Jy ! Total flux subtracted in 200 components = 0.0869746 Jy ! Clean residual min=-0.003436 max=0.006517 Jy/beam ! Clean residual mean=-0.000019 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 0.676825 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 40 components and 0.676825 Jy ! Inverting map ! Added new window around map position (-15.4, 37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00796911 Jy ! Component: 100 - total flux cleaned = 0.0141244 Jy ! Component: 150 - total flux cleaned = 0.0190929 Jy ! Component: 200 - total flux cleaned = 0.0232592 Jy ! Total flux subtracted in 200 components = 0.0232592 Jy ! Clean residual min=-0.002935 max=0.003761 Jy/beam ! Clean residual mean=-0.000014 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.700084 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 64 components and 0.700084 Jy ! Inverting map ! Added new window around map position (2.8, 14.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395312 Jy ! Component: 100 - total flux cleaned = 0.00728294 Jy ! Component: 150 - total flux cleaned = 0.0101848 Jy ! Component: 200 - total flux cleaned = 0.0126189 Jy ! Total flux subtracted in 200 components = 0.0126189 Jy ! Clean residual min=-0.002746 max=0.003095 Jy/beam ! Clean residual mean=-0.000013 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.712703 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 86 components and 0.712703 Jy ! Inverting map ! Added new window around map position (18.8, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239742 Jy ! Component: 100 - total flux cleaned = 0.0039923 Jy ! Component: 150 - total flux cleaned = 0.00546497 Jy ! Component: 200 - total flux cleaned = 0.00667096 Jy ! Total flux subtracted in 200 components = 0.00667096 Jy ! Clean residual min=-0.002627 max=0.002683 Jy/beam ! Clean residual mean=-0.000008 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.719374 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 102 components and 0.719374 Jy ! Inverting map ! Added new window around map position (2.8, 21.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165011 Jy ! Component: 100 - total flux cleaned = 0.00260828 Jy ! Component: 150 - total flux cleaned = 0.00336127 Jy ! Component: 200 - total flux cleaned = 0.00393478 Jy ! Total flux subtracted in 200 components = 0.00393478 Jy ! Clean residual min=-0.002521 max=0.002321 Jy/beam ! Clean residual mean=-0.000006 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.723308 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 124 components and 0.723308 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.238 mas, bmaj=2.356 mas, bpa=-88.67 degrees ! Estimated noise=0.733204 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200731 Jy ! Component: 100 - total flux cleaned = 0.00301769 Jy ! Component: 150 - total flux cleaned = 0.0039402 Jy ! Component: 200 - total flux cleaned = 0.00485328 Jy ! Total flux subtracted in 200 components = 0.00485328 Jy ! Clean residual min=-0.002929 max=0.002595 Jy/beam ! Clean residual mean=-0.000010 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.728161 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000625303 Jy ! Component: 100 - total flux cleaned = 0.00121238 Jy ! Component: 150 - total flux cleaned = 0.00166875 Jy ! Component: 200 - total flux cleaned = 0.00219525 Jy ! Total flux subtracted in 200 components = 0.00219525 Jy ! Clean residual min=-0.002722 max=0.002540 Jy/beam ! Clean residual mean=-0.000007 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.730357 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 181 components and 0.730357 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.017 mas, bmaj=1.251 mas, bpa=-13.81 degrees ! Estimated noise=0.551114 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000928631 Jy ! Component: 100 - total flux cleaned = -0.00130338 Jy ! Component: 150 - total flux cleaned = -0.00136011 Jy ! Component: 200 - total flux cleaned = -0.00124883 Jy ! Total flux subtracted in 200 components = -0.00124883 Jy ! Clean residual min=-0.002337 max=0.002182 Jy/beam ! Clean residual mean=-0.000002 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.729108 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 198 components and 0.729108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074091Jy sigma=0.415846 ! Fit after self-cal, rms=0.073936Jy sigma=0.414715 wmodel J1735+5049_X_map.mod ! Writing 198 model components to file: J1735+5049_X_map.mod wobs J1735+5049_X_uvs.fits ! Writing UV FITS file: J1735+5049_X_uvs.fits wwins J1735+5049_X_map.win ! wwins: Wrote 14 windows to J1735+5049_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211561 Jy ! Component: 100 - total flux cleaned = 0.000145069 Jy ! Component: 150 - total flux cleaned = 0.000524009 Jy ! Component: 200 - total flux cleaned = 0.000657919 Jy ! Component: 250 - total flux cleaned = 0.0007885 Jy ! Component: 300 - total flux cleaned = 0.000884276 Jy ! Component: 350 - total flux cleaned = 0.00100851 Jy ! Component: 400 - total flux cleaned = 0.00100798 Jy ! Component: 450 - total flux cleaned = 0.00103862 Jy ! Component: 500 - total flux cleaned = 0.00109811 Jy ! Component: 550 - total flux cleaned = 0.00121368 Jy ! Component: 600 - total flux cleaned = 0.00129923 Jy ! Component: 650 - total flux cleaned = 0.00143885 Jy ! Component: 700 - total flux cleaned = 0.00146656 Jy ! Component: 750 - total flux cleaned = 0.00152064 Jy ! Component: 800 - total flux cleaned = 0.00170787 Jy ! Component: 850 - total flux cleaned = 0.00178682 Jy ! Component: 900 - total flux cleaned = 0.00191689 Jy ! Component: 950 - total flux cleaned = 0.00209668 Jy ! Component: 1000 - total flux cleaned = 0.00227375 Jy ! Component: 1050 - total flux cleaned = 0.00242382 Jy ! Component: 1100 - total flux cleaned = 0.00267054 Jy ! Component: 1150 - total flux cleaned = 0.00286543 Jy ! Component: 1200 - total flux cleaned = 0.00312994 Jy ! Component: 1250 - total flux cleaned = 0.00322462 Jy ! Component: 1300 - total flux cleaned = 0.00348309 Jy ! Component: 1350 - total flux cleaned = 0.00364531 Jy ! Component: 1400 - total flux cleaned = 0.00385228 Jy ! Component: 1450 - total flux cleaned = 0.00398849 Jy ! Component: 1500 - total flux cleaned = 0.00419052 Jy ! Component: 1550 - total flux cleaned = 0.00443541 Jy ! Component: 1600 - total flux cleaned = 0.00452354 Jy ! Component: 1650 - total flux cleaned = 0.00480739 Jy ! Component: 1700 - total flux cleaned = 0.00491539 Jy ! Component: 1750 - total flux cleaned = 0.00508689 Jy ! Component: 1800 - total flux cleaned = 0.00521415 Jy ! Component: 1850 - total flux cleaned = 0.00536149 Jy ! Component: 1900 - total flux cleaned = 0.00548615 Jy ! Component: 1950 - total flux cleaned = 0.00569298 Jy ! Component: 2000 - total flux cleaned = 0.00583625 Jy ! Component: 2050 - total flux cleaned = 0.00593794 Jy ! Component: 2100 - total flux cleaned = 0.00605849 Jy ! Component: 2150 - total flux cleaned = 0.00625828 Jy ! Component: 2200 - total flux cleaned = 0.00621894 Jy ! Component: 2250 - total flux cleaned = 0.00651333 Jy ! Component: 2300 - total flux cleaned = 0.0065716 Jy ! Component: 2350 - total flux cleaned = 0.00676443 Jy ! Component: 2400 - total flux cleaned = 0.00674511 Jy ! Component: 2450 - total flux cleaned = 0.00689716 Jy ! Component: 2500 - total flux cleaned = 0.00693489 Jy ! Component: 2550 - total flux cleaned = 0.00708458 Jy ! Component: 2600 - total flux cleaned = 0.00723277 Jy ! Component: 2650 - total flux cleaned = 0.00732491 Jy ! Component: 2700 - total flux cleaned = 0.00737959 Jy ! Component: 2750 - total flux cleaned = 0.00745215 Jy ! Component: 2800 - total flux cleaned = 0.00754211 Jy ! Component: 2850 - total flux cleaned = 0.00755978 Jy ! Component: 2900 - total flux cleaned = 0.00770141 Jy ! Component: 2950 - total flux cleaned = 0.00777195 Jy ! Component: 3000 - total flux cleaned = 0.00785912 Jy ! Component: 3050 - total flux cleaned = 0.00791106 Jy ! Component: 3100 - total flux cleaned = 0.00796276 Jy ! Component: 3150 - total flux cleaned = 0.00797976 Jy ! Component: 3200 - total flux cleaned = 0.00806471 Jy ! Component: 3250 - total flux cleaned = 0.00809821 Jy ! Component: 3300 - total flux cleaned = 0.00813146 Jy ! Component: 3350 - total flux cleaned = 0.00816455 Jy ! Component: 3400 - total flux cleaned = 0.00828007 Jy ! Component: 3450 - total flux cleaned = 0.00829641 Jy ! Component: 3500 - total flux cleaned = 0.00826403 Jy ! Component: 3550 - total flux cleaned = 0.00832861 Jy ! Component: 3600 - total flux cleaned = 0.00840895 Jy ! Component: 3650 - total flux cleaned = 0.00847254 Jy ! Component: 3700 - total flux cleaned = 0.00852011 Jy ! Component: 3750 - total flux cleaned = 0.00856736 Jy ! Component: 3800 - total flux cleaned = 0.0086456 Jy ! Component: 3850 - total flux cleaned = 0.00870755 Jy ! Component: 3900 - total flux cleaned = 0.00872277 Jy ! Component: 3950 - total flux cleaned = 0.00876867 Jy ! Component: 4000 - total flux cleaned = 0.0088144 Jy ! Component: 4050 - total flux cleaned = 0.00881446 Jy ! Total flux subtracted in 4096 components = 0.00887459 Jy ! Clean residual min=-0.000867 max=0.000753 Jy/beam ! Clean residual mean=-0.000002 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.737982 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 516 components and 0.737982 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1735+5049_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.017 x 1.251 at -13.81 degrees (North through East) ! Clean map min=-0.0015362 max=0.46832 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1735+5049_X_map.fits wmodel /image_prod/ug002_uva//J1735+5049_X_map.mod ! Writing 516 model components to file: /image_prod/ug002_uva//J1735+5049_X_map.mod wobs /image_prod/ug002_uva//J1735+5049_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1735+5049_X_uvs.fits wwins /image_prod/ug002_uva//J1735+5049_X_map.win ! wwins: Wrote 15 windows to /image_prod/ug002_uva//J1735+5049_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.468317 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000261464 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.167491 0.167491 0.334983 0.669966 1.33993 2.67986 5.35973 10.7195 21.4389 42.8778 85.7556 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.468 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1791.14 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1735+5049_X_dfm.log closed on Thu Mar 5 03:18:56 2020