! Started logfile: /image_prod/ug002_uva//J1734+0926_X_dfm.log on Thu Mar  5 03:18:29 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1734+0926_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1734+0926_X_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.671852 visibilities/baseline/integration-bin.
! Found source: J1734+0926
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 21768 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1734+0926_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 130 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 130 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 130 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 130 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 130 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 130 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 130 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 130 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 130 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 130 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 130 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 130 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.037561Jy  sigma=8.836080
! Fit after  self-cal, rms=0.802880Jy  sigma=6.966627
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6417 mas, bmaj=1.68 mas, bpa=-7.596 degrees
! Estimated noise=1.07946 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.140453 Jy
! Component: 100  -  total flux cleaned = 0.179126 Jy
! Total flux subtracted in 100 components = 0.179126 Jy
! Clean residual min=-0.027075 max=0.084832 Jy/beam
! Clean residual mean=0.000006 rms=0.006280 Jy/beam
! Combined flux in latest and established models = 0.179125 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.179125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.163639Jy  sigma=1.336735
! Fit after  self-cal, rms=0.163159Jy  sigma=1.331639
! Inverting map 
! Added new window around map position (13, -6.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.068871 Jy
! Component: 100  -  total flux cleaned = 0.100402 Jy
! Total flux subtracted in 100 components = 0.100402 Jy
! Clean residual min=-0.017994 max=0.019438 Jy/beam
! Clean residual mean=0.000006 rms=0.003926 Jy/beam
! Combined flux in latest and established models = 0.279527 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.279527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.119411Jy  sigma=0.959441
! Fit after  self-cal, rms=0.113695Jy  sigma=0.909218
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0299649 Jy
! Component: 100  -  total flux cleaned = 0.0512157 Jy
! Total flux subtracted in 100 components = 0.0512157 Jy
! Clean residual min=-0.013823 max=0.018580 Jy/beam
! Clean residual mean=0.000002 rms=0.002946 Jy/beam
! Combined flux in latest and established models = 0.330743 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 24 components and 0.330743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096843Jy  sigma=0.771062
! Fit after  self-cal, rms=0.096390Jy  sigma=0.767078
! Inverting map 
! Added new window around map position (1, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0205801 Jy
! Component: 100  -  total flux cleaned = 0.0362414 Jy
! Total flux subtracted in 100 components = 0.0362414 Jy
! Clean residual min=-0.011735 max=0.018013 Jy/beam
! Clean residual mean=0.000001 rms=0.002474 Jy/beam
! Combined flux in latest and established models = 0.366985 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 36 components and 0.366985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086470Jy  sigma=0.687144
! Fit after  self-cal, rms=0.086230Jy  sigma=0.685267
! Inverting map 
! Added new window around map position (11.6, -5.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174694 Jy
! Component: 100  -  total flux cleaned = 0.0307552 Jy
! Total flux subtracted in 100 components = 0.0307552 Jy
! Clean residual min=-0.009343 max=0.009046 Jy/beam
! Clean residual mean=0.000001 rms=0.002059 Jy/beam
! Combined flux in latest and established models = 0.39774 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 44 components and 0.39774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078295Jy  sigma=0.618201
! Fit after  self-cal, rms=0.078128Jy  sigma=0.616784
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8123 mas, bmaj=1.956 mas, bpa=-7.938 degrees
! Estimated noise=0.570658 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0232981 Jy
! Component: 100  -  total flux cleaned = 0.0411473 Jy
! Component: 150  -  total flux cleaned = 0.0554141 Jy
! Component: 200  -  total flux cleaned = 0.0670005 Jy
! Total flux subtracted in 200 components = 0.0670005 Jy
! Clean residual min=-0.009903 max=0.010816 Jy/beam
! Clean residual mean=-0.000008 rms=0.002255 Jy/beam
! Combined flux in latest and established models = 0.46474 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 75 components and 0.46474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066290Jy  sigma=0.523632
! Fit after  self-cal, rms=0.066130Jy  sigma=0.522101
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8123 x 1.956 at -7.938 degrees (North through East)
! Clean map  min=-0.0092133  max=0.20632 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     HN        0.85     KP        1.00     LA        0.99     
!   MK        1.05     NL        1.11     OV        0.88     PT        0.84     
!   SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     HN        0.85     KP        0.99     LA        1.00     
!   MK        1.04     NL        1.11     OV        0.89     PT        0.87     
!   SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     HN        0.84     KP        0.99     LA        1.00     
!   MK        1.04     NL        1.12     OV        0.91     PT        0.88     
!   SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     HN        0.86     KP        1.03     LA        1.01     
!   MK        1.06     NL        1.12     OV        0.91     PT        0.86     
!   SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     HN        0.88     KP        0.98     LA        1.01     
!   MK        1.02     NL        1.09     OV        0.91     PT        0.88     
!   SC        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     HN        0.88     KP        1.01     LA        1.01     
!   MK        1.07     NL        1.12     OV        0.91     PT        0.89     
!   SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        0.90     KP        1.01     LA        1.01     
!   MK        1.09     NL        1.12     OV        0.93     PT        0.88     
!   SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     HN        0.88     KP        1.02     LA        1.01     
!   MK        1.11     NL        1.14     OV        0.91     PT        0.90     
!   SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     HN        0.90     KP        1.00     LA        1.01     
!   MK        1.09     NL        1.14     OV        0.91     PT        0.90     
!   SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        0.88     KP        1.02     LA        1.01     
!   MK        1.09     NL        1.17     OV        0.95     PT        0.91     
!   SC        1.05     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        0.91     KP        1.01     LA        1.03     
!   MK        1.07     NL        1.16     OV        0.94     PT        0.89     
!   SC        1.07     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        0.88     KP        1.01     LA        1.01     
!   MK        1.09     NL        1.16     OV        0.94     PT        0.90     
!   SC        1.09     
! 
! 
! Fit before self-cal, rms=0.066130Jy  sigma=0.522101
! Fit after  self-cal, rms=0.056265Jy  sigma=0.458661
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8301 mas, bmaj=1.98 mas, bpa=-7.826 degrees
! Estimated noise=0.557159 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00793315 Jy
! Component: 100  -  total flux cleaned = 0.0120642 Jy
! Component: 150  -  total flux cleaned = 0.0137657 Jy
! Component: 200  -  total flux cleaned = 0.0153259 Jy
! Total flux subtracted in 200 components = 0.0153259 Jy
! Clean residual min=-0.003008 max=0.004181 Jy/beam
! Clean residual mean=-0.000002 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.480066 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 97 components and 0.480066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055032Jy  sigma=0.445671
! Fit after  self-cal, rms=0.054983Jy  sigma=0.445009
! Inverting map 
! Added new window around map position (-5, 3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00389229 Jy
! Component: 100  -  total flux cleaned = 0.00539347 Jy
! Component: 150  -  total flux cleaned = 0.00647407 Jy
! Component: 200  -  total flux cleaned = 0.0073504 Jy
! Total flux subtracted in 200 components = 0.0073504 Jy
! Clean residual min=-0.002474 max=0.002816 Jy/beam
! Clean residual mean=-0.000000 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.487417 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 117 components and 0.487417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054620Jy  sigma=0.441661
! Fit after  self-cal, rms=0.054596Jy  sigma=0.441563
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054596Jy  sigma=0.441563
! Fit after  self-cal, rms=0.054280Jy  sigma=0.436788
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8295 mas, bmaj=1.978 mas, bpa=-7.789 degrees
! Estimated noise=0.558585 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133412 Jy
! Component: 100  -  total flux cleaned = 0.00170038 Jy
! Component: 150  -  total flux cleaned = 0.00205779 Jy
! Component: 200  -  total flux cleaned = 0.00232911 Jy
! Total flux subtracted in 200 components = 0.00232911 Jy
! Clean residual min=-0.001715 max=0.001920 Jy/beam
! Clean residual mean=0.000002 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.489746 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 131 components and 0.489746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054165Jy  sigma=0.435756
! Fit after  self-cal, rms=0.054165Jy  sigma=0.435713
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.6, 5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101739 Jy
! Component: 100  -  total flux cleaned = 0.00132864 Jy
! Component: 150  -  total flux cleaned = 0.00164616 Jy
! Component: 200  -  total flux cleaned = 0.00175586 Jy
! Total flux subtracted in 200 components = 0.00175586 Jy
! Clean residual min=-0.001532 max=0.001547 Jy/beam
! Clean residual mean=0.000002 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.491502 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 141 components and 0.491502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054086Jy  sigma=0.435057
! Fit after  self-cal, rms=0.054083Jy  sigma=0.435040
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054083Jy  sigma=0.435040
! Fit after  self-cal, rms=0.054043Jy  sigma=0.434921
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8289 mas, bmaj=1.976 mas, bpa=-7.762 degrees
! Estimated noise=0.558588 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000759739 Jy
! Component: 100  -  total flux cleaned = 0.00120145 Jy
! Component: 150  -  total flux cleaned = 0.00149788 Jy
! Component: 200  -  total flux cleaned = 0.00164982 Jy
! Total flux subtracted in 200 components = 0.00164982 Jy
! Clean residual min=-0.001447 max=0.001406 Jy/beam
! Clean residual mean=0.000002 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.493152 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 146 components and 0.493152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054000Jy  sigma=0.434564
! Fit after  self-cal, rms=0.054000Jy  sigma=0.434556
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000186886 Jy
! Component: 100  -  total flux cleaned = 0.000214562 Jy
! Component: 150  -  total flux cleaned = 0.00026596 Jy
! Component: 200  -  total flux cleaned = 0.000314837 Jy
! Total flux subtracted in 200 components = 0.000314837 Jy
! Clean residual min=-0.001426 max=0.001350 Jy/beam
! Clean residual mean=0.000002 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.493466 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 152 components and 0.493466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053976Jy  sigma=0.434363
! Fit after  self-cal, rms=0.053976Jy  sigma=0.434358
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053976Jy  sigma=0.434358
! Fit after  self-cal, rms=0.053963Jy  sigma=0.434326
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.934 mas, bmaj=2.995 mas, bpa=-4.424 degrees
! Estimated noise=0.711471 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011098 Jy
! Component: 100  -  total flux cleaned = 0.00154229 Jy
! Component: 150  -  total flux cleaned = 0.00171657 Jy
! Component: 200  -  total flux cleaned = 0.00189168 Jy
! Total flux subtracted in 200 components = 0.00189168 Jy
! Clean residual min=-0.001552 max=0.001858 Jy/beam
! Clean residual mean=0.000004 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.495358 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 168 components and 0.495358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053954Jy  sigma=0.434248
! Fit after  self-cal, rms=0.053954Jy  sigma=0.434242
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000170207 Jy
! Component: 100  -  total flux cleaned = 0.000281317 Jy
! Component: 150  -  total flux cleaned = 0.000350131 Jy
! Component: 200  -  total flux cleaned = 0.0003822 Jy
! Total flux subtracted in 200 components = 0.0003822 Jy
! Clean residual min=-0.001532 max=0.001788 Jy/beam
! Clean residual mean=0.000004 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.49574 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 180 components and 0.49574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053951Jy  sigma=0.434231
! Fit after  self-cal, rms=0.053951Jy  sigma=0.434229
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8286 mas, bmaj=1.975 mas, bpa=-7.745 degrees
! Estimated noise=0.558724 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8286 x 1.975 at -7.745 degrees (North through East)
! Clean map  min=-0.0012342  max=0.19975 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6536 mas, bmaj=1.692 mas, bpa=-7.518 degrees
! Estimated noise=1.07071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150586 Jy
! Component: 100  -  total flux cleaned = 0.218247 Jy
! Component: 150  -  total flux cleaned = 0.259764 Jy
! Component: 200  -  total flux cleaned = 0.290657 Jy
! Total flux subtracted in 200 components = 0.290657 Jy
! Clean residual min=-0.011990 max=0.018374 Jy/beam
! Clean residual mean=0.000000 rms=0.003020 Jy/beam
! Combined flux in latest and established models = 0.290657 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.290657 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8286 mas, bmaj=1.975 mas, bpa=-7.745 degrees
! Estimated noise=0.558724 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0437722 Jy
! Component: 100  -  total flux cleaned = 0.0756048 Jy
! Component: 150  -  total flux cleaned = 0.0996184 Jy
! Component: 200  -  total flux cleaned = 0.118 Jy
! Total flux subtracted in 200 components = 0.118 Jy
! Clean residual min=-0.006106 max=0.010775 Jy/beam
! Clean residual mean=-0.000007 rms=0.002030 Jy/beam
! Combined flux in latest and established models = 0.408657 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 32 components and 0.408657 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142745 Jy
! Component: 100  -  total flux cleaned = 0.0255031 Jy
! Component: 150  -  total flux cleaned = 0.0345306 Jy
! Component: 200  -  total flux cleaned = 0.0419175 Jy
! Total flux subtracted in 200 components = 0.0419175 Jy
! Clean residual min=-0.003701 max=0.004452 Jy/beam
! Clean residual mean=-0.000003 rms=0.001016 Jy/beam
! Combined flux in latest and established models = 0.450575 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 62 components and 0.450575 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00610658 Jy
! Component: 100  -  total flux cleaned = 0.0112267 Jy
! Component: 150  -  total flux cleaned = 0.0155844 Jy
! Component: 200  -  total flux cleaned = 0.0193189 Jy
! Total flux subtracted in 200 components = 0.0193189 Jy
! Clean residual min=-0.002665 max=0.002697 Jy/beam
! Clean residual mean=-0.000000 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.469894 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 91 components and 0.469894 Jy
! Inverting map 
! Added new window around map position (8.4, 47.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00327826 Jy
! Component: 100  -  total flux cleaned = 0.00610098 Jy
! Component: 150  -  total flux cleaned = 0.00857031 Jy
! Component: 200  -  total flux cleaned = 0.0107362 Jy
! Total flux subtracted in 200 components = 0.0107362 Jy
! Clean residual min=-0.002117 max=0.001848 Jy/beam
! Clean residual mean=0.000001 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.48063 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 108 components and 0.48063 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.934 mas, bmaj=2.995 mas, bpa=-4.424 degrees
! Estimated noise=0.711471 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00362409 Jy
! Component: 100  -  total flux cleaned = 0.00620291 Jy
! Component: 150  -  total flux cleaned = 0.00819612 Jy
! Component: 200  -  total flux cleaned = 0.00976978 Jy
! Total flux subtracted in 200 components = 0.00976978 Jy
! Clean residual min=-0.001866 max=0.001928 Jy/beam
! Clean residual mean=0.000003 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.4904 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126849 Jy
! Component: 100  -  total flux cleaned = 0.00230712 Jy
! Component: 150  -  total flux cleaned = 0.0031003 Jy
! Component: 200  -  total flux cleaned = 0.00356929 Jy
! Total flux subtracted in 200 components = 0.00356929 Jy
! Clean residual min=-0.001670 max=0.001784 Jy/beam
! Clean residual mean=0.000004 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.493969 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 172 components and 0.493969 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8286 mas, bmaj=1.975 mas, bpa=-7.745 degrees
! Estimated noise=0.558724 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00032192 Jy
! Component: 100  -  total flux cleaned = 0.000825069 Jy
! Component: 150  -  total flux cleaned = 0.00108243 Jy
! Component: 200  -  total flux cleaned = 0.00111317 Jy
! Total flux subtracted in 200 components = 0.00111317 Jy
! Clean residual min=-0.001352 max=0.001571 Jy/beam
! Clean residual mean=0.000002 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.495082 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 184 components and 0.495082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053966Jy  sigma=0.434248
! Fit after  self-cal, rms=0.053945Jy  sigma=0.434124
wmodel J1734+0926_X_map.mod
! Writing 184 model components to file: J1734+0926_X_map.mod
wobs   J1734+0926_X_uvs.fits
! Writing UV FITS file: J1734+0926_X_uvs.fits
wwins  J1734+0926_X_map.win
! wwins: Wrote 7 windows to J1734+0926_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00043657 Jy
! Component: 100  -  total flux cleaned = 0.00048366 Jy
! Component: 150  -  total flux cleaned = 0.000461698 Jy
! Component: 200  -  total flux cleaned = 0.000377505 Jy
! Component: 250  -  total flux cleaned = 0.000336732 Jy
! Component: 300  -  total flux cleaned = 0.000297442 Jy
! Component: 350  -  total flux cleaned = 0.000259433 Jy
! Component: 400  -  total flux cleaned = 0.000203772 Jy
! Component: 450  -  total flux cleaned = 0.000113521 Jy
! Component: 500  -  total flux cleaned = 4.31465e-05 Jy
! Component: 550  -  total flux cleaned = -9.01353e-06 Jy
! Component: 600  -  total flux cleaned = -0.000127806 Jy
! Component: 650  -  total flux cleaned = -0.000194522 Jy
! Component: 700  -  total flux cleaned = -0.000308995 Jy
! Component: 750  -  total flux cleaned = -0.000372937 Jy
! Component: 800  -  total flux cleaned = -0.000498535 Jy
! Component: 850  -  total flux cleaned = -0.000606351 Jy
! Component: 900  -  total flux cleaned = -0.000757618 Jy
! Component: 950  -  total flux cleaned = -0.00081688 Jy
! Component: 1000  -  total flux cleaned = -0.00100749 Jy
! Component: 1050  -  total flux cleaned = -0.00113706 Jy
! Component: 1100  -  total flux cleaned = -0.00126499 Jy
! Component: 1150  -  total flux cleaned = -0.00137728 Jy
! Component: 1200  -  total flux cleaned = -0.00151541 Jy
! Component: 1250  -  total flux cleaned = -0.00167881 Jy
! Component: 1300  -  total flux cleaned = -0.00177261 Jy
! Component: 1350  -  total flux cleaned = -0.00189143 Jy
! Component: 1400  -  total flux cleaned = -0.0019962 Jy
! Component: 1450  -  total flux cleaned = -0.00207354 Jy
! Component: 1500  -  total flux cleaned = -0.00217553 Jy
! Component: 1550  -  total flux cleaned = -0.00228879 Jy
! Component: 1600  -  total flux cleaned = -0.00237575 Jy
! Component: 1650  -  total flux cleaned = -0.00244925 Jy
! Component: 1700  -  total flux cleaned = -0.00252193 Jy
! Component: 1750  -  total flux cleaned = -0.00262996 Jy
! Component: 1800  -  total flux cleaned = -0.00274862 Jy
! Component: 1850  -  total flux cleaned = -0.00279541 Jy
! Component: 1900  -  total flux cleaned = -0.00285363 Jy
! Component: 1950  -  total flux cleaned = -0.00296854 Jy
! Component: 2000  -  total flux cleaned = -0.00304799 Jy
! Component: 2050  -  total flux cleaned = -0.00312675 Jy
! Component: 2100  -  total flux cleaned = -0.00320484 Jy
! Component: 2150  -  total flux cleaned = -0.00332584 Jy
! Component: 2200  -  total flux cleaned = -0.00341299 Jy
! Component: 2250  -  total flux cleaned = -0.00347781 Jy
! Component: 2300  -  total flux cleaned = -0.00356323 Jy
! Component: 2350  -  total flux cleaned = -0.00365857 Jy
! Component: 2400  -  total flux cleaned = -0.0037633 Jy
! Component: 2450  -  total flux cleaned = -0.00380484 Jy
! Component: 2500  -  total flux cleaned = -0.00387681 Jy
! Component: 2550  -  total flux cleaned = -0.00391741 Jy
! Component: 2600  -  total flux cleaned = -0.00397802 Jy
! Component: 2650  -  total flux cleaned = -0.00408815 Jy
! Component: 2700  -  total flux cleaned = -0.00405843 Jy
! Component: 2750  -  total flux cleaned = -0.00411755 Jy
! Component: 2800  -  total flux cleaned = -0.00413726 Jy
! Component: 2850  -  total flux cleaned = -0.00417604 Jy
! Component: 2900  -  total flux cleaned = -0.00423355 Jy
! Component: 2950  -  total flux cleaned = -0.00425243 Jy
! Component: 3000  -  total flux cleaned = -0.00427124 Jy
! Component: 3050  -  total flux cleaned = -0.00431807 Jy
! Component: 3100  -  total flux cleaned = -0.00435526 Jy
! Component: 3150  -  total flux cleaned = -0.00439201 Jy
! Component: 3200  -  total flux cleaned = -0.0044285 Jy
! Component: 3250  -  total flux cleaned = -0.00442854 Jy
! Component: 3300  -  total flux cleaned = -0.00448255 Jy
! Component: 3350  -  total flux cleaned = -0.00452724 Jy
! Component: 3400  -  total flux cleaned = -0.00457145 Jy
! Component: 3450  -  total flux cleaned = -0.00459785 Jy
! Component: 3500  -  total flux cleaned = -0.00462416 Jy
! Component: 3550  -  total flux cleaned = -0.00466753 Jy
! Component: 3600  -  total flux cleaned = -0.00471899 Jy
! Component: 3650  -  total flux cleaned = -0.00472746 Jy
! Component: 3700  -  total flux cleaned = -0.00477822 Jy
! Component: 3750  -  total flux cleaned = -0.00482027 Jy
! Component: 3800  -  total flux cleaned = -0.00482023 Jy
! Component: 3850  -  total flux cleaned = -0.00485332 Jy
! Component: 3900  -  total flux cleaned = -0.00481232 Jy
! Component: 3950  -  total flux cleaned = -0.00486943 Jy
! Component: 4000  -  total flux cleaned = -0.00486941 Jy
! Component: 4050  -  total flux cleaned = -0.00490172 Jy
! Total flux subtracted in 4096 components = -0.00493373 Jy
! Clean residual min=-0.000487 max=0.000445 Jy/beam
! Clean residual mean=0.000001 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.490149 Jy
keep
! Adding 311 model components to the UV plane model.
! The established model now contains 495 components and 0.490149 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1734+0926_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8286 x 1.975 at -7.745 degrees (North through East)
! Clean map  min=-0.00074021  max=0.20018 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1734+0926_X_map.fits
wmodel /image_prod/ug002_uva//J1734+0926_X_map.mod
! Writing 495 model components to file: /image_prod/ug002_uva//J1734+0926_X_map.mod
wobs   /image_prod/ug002_uva//J1734+0926_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1734+0926_X_uvs.fits
wwins  /image_prod/ug002_uva//J1734+0926_X_map.win
! wwins: Wrote 8 windows to /image_prod/ug002_uva//J1734+0926_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.200176 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000131885 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.197654 0.197654 0.395308 0.790616 1.58123 3.16247 6.32493 12.6499 25.2997 50.5994
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.2 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1517.8 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1734+0926_X_dfm.log closed on Thu Mar  5 03:18:34 2020