! Started logfile: /image_prod/ug002_uva//J1733-1304_X_j_dfm.log on Thu Mar 5 03:18:04 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1733-1304_X_j_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1733-1304_X_j_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.895833 visibilities/baseline/integration-bin. ! Found source: J1733-1304 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 7740 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1733-1304_X_j] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=3.714310Jy sigma=8.266994 ! Fit after self-cal, rms=2.655986Jy sigma=5.484910 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6303 mas, bmaj=1.502 mas, bpa=-3.176 degrees ! Estimated noise=4.27834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.1673 Jy ! Component: 100 - total flux cleaned = 2.88153 Jy ! Total flux subtracted in 100 components = 2.88153 Jy ! Clean residual min=-0.158546 max=0.350337 Jy/beam ! Clean residual mean=0.000244 rms=0.037417 Jy/beam ! Combined flux in latest and established models = 2.88153 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 2.88153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.196121Jy sigma=2.312661 ! Fit after self-cal, rms=1.192165Jy sigma=2.296795 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.420413 Jy ! Component: 100 - total flux cleaned = 0.691069 Jy ! Total flux subtracted in 100 components = 0.691069 Jy ! Clean residual min=-0.127829 max=0.208599 Jy/beam ! Clean residual mean=0.000141 rms=0.028029 Jy/beam ! Combined flux in latest and established models = 3.5726 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 3.5726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.800295Jy sigma=1.653586 ! Fit after self-cal, rms=0.798411Jy sigma=1.644102 ! Inverting map ! Added new window around map position (2, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.213815 Jy ! Component: 100 - total flux cleaned = 0.368366 Jy ! Total flux subtracted in 100 components = 0.368366 Jy ! Clean residual min=-0.120129 max=0.161138 Jy/beam ! Clean residual mean=0.000091 rms=0.024069 Jy/beam ! Combined flux in latest and established models = 3.94097 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 3.94097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.660612Jy sigma=1.422360 ! Fit after self-cal, rms=0.659769Jy sigma=1.417768 ! Inverting map ! Added new window around map position (-2, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15116 Jy ! Component: 100 - total flux cleaned = 0.26371 Jy ! Total flux subtracted in 100 components = 0.26371 Jy ! Clean residual min=-0.100350 max=0.125507 Jy/beam ! Clean residual mean=0.000056 rms=0.021348 Jy/beam ! Combined flux in latest and established models = 4.20468 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 4.20468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.584440Jy sigma=1.275191 ! Fit after self-cal, rms=0.584451Jy sigma=1.272152 ! Inverting map ! Added new window around map position (0, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120617 Jy ! Component: 100 - total flux cleaned = 0.198734 Jy ! Total flux subtracted in 100 components = 0.198734 Jy ! Clean residual min=-0.089893 max=0.118962 Jy/beam ! Clean residual mean=0.000034 rms=0.019468 Jy/beam ! Combined flux in latest and established models = 4.40341 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 4.40341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.532279Jy sigma=1.182317 ! Fit after self-cal, rms=0.531824Jy sigma=1.178282 ! Inverting map ! Added new window around map position (2.6, 8.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118067 Jy ! Component: 100 - total flux cleaned = 0.196002 Jy ! Total flux subtracted in 100 components = 0.196002 Jy ! Clean residual min=-0.092033 max=0.104707 Jy/beam ! Clean residual mean=0.000037 rms=0.017578 Jy/beam ! Combined flux in latest and established models = 4.59942 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 47 components and 4.59942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.491701Jy sigma=1.092541 ! Fit after self-cal, rms=0.488393Jy sigma=1.083426 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7633 mas, bmaj=1.73 mas, bpa=-3.074 degrees ! Estimated noise=3.40329 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110656 Jy ! Component: 100 - total flux cleaned = 0.19509 Jy ! Component: 150 - total flux cleaned = 0.262665 Jy ! Component: 200 - total flux cleaned = 0.314642 Jy ! Total flux subtracted in 200 components = 0.314642 Jy ! Clean residual min=-0.097746 max=0.104510 Jy/beam ! Clean residual mean=0.000029 rms=0.022595 Jy/beam ! Combined flux in latest and established models = 4.91406 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 63 components and 4.91406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.435376Jy sigma=0.995853 ! Fit after self-cal, rms=0.434462Jy sigma=0.991016 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7633 x 1.73 at -3.074 degrees (North through East) ! Clean map min=-0.088573 max=2.9191 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.91 KP 1.01 ! LA 1.02 MK 1.02 NL 1.15 OV 0.93 ! PT 0.91 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 0.95 KP 1.03 ! LA 1.04 MK 1.01 NL 1.16 OV 0.94 ! PT 0.90 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 0.92 KP 1.04 ! LA 0.98 MK 1.02 NL 1.14 OV 0.92 ! PT 0.90 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.93 KP 1.04 ! LA 0.99 MK 1.03 NL 1.14 OV 0.93 ! PT 0.88 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.95 KP 1.04 ! LA 1.01 MK 1.04 NL 1.13 OV 0.93 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.92 KP 1.05 ! LA 1.01 MK 1.03 NL 1.15 OV 0.92 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.94 KP 1.04 ! LA 1.00 MK 1.00 NL 1.19 OV 0.93 ! PT 0.90 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.95 KP 1.04 ! LA 1.02 MK 0.98 NL 1.15 OV 0.94 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.92 KP 1.03 ! LA 1.01 MK 1.01 NL 1.15 OV 0.91 ! PT 0.89 SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.95 KP 1.04 ! LA 0.99 MK 0.99 NL 1.14 OV 0.93 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.94 KP 1.05 ! LA 0.99 MK 1.01 NL 1.12 OV 0.92 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.93 KP 1.04 ! LA 1.00 MK 1.03 NL 1.19 OV 0.92 ! PT 0.89 SC 1.00 ! ! ! Fit before self-cal, rms=0.434462Jy sigma=0.991016 ! Fit after self-cal, rms=0.301426Jy sigma=0.682204 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7656 mas, bmaj=1.742 mas, bpa=-3.06 degrees ! Estimated noise=3.41644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0687409 Jy ! Component: 100 - total flux cleaned = -0.0791046 Jy ! Component: 150 - total flux cleaned = -0.0804594 Jy ! Component: 200 - total flux cleaned = -0.0766973 Jy ! Total flux subtracted in 200 components = -0.0766973 Jy ! Clean residual min=-0.066161 max=0.067549 Jy/beam ! Clean residual mean=-0.000035 rms=0.014001 Jy/beam ! Combined flux in latest and established models = 4.83736 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 4.83736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.277353Jy sigma=0.642392 ! Fit after self-cal, rms=0.277327Jy sigma=0.641529 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.277327Jy sigma=0.641529 ! Fit after self-cal, rms=0.196116Jy sigma=0.428405 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7649 mas, bmaj=1.736 mas, bpa=-2.806 degrees ! Estimated noise=3.41044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0454667 Jy ! Component: 100 - total flux cleaned = -0.0680899 Jy ! Component: 150 - total flux cleaned = -0.0805589 Jy ! Component: 200 - total flux cleaned = -0.0897709 Jy ! Total flux subtracted in 200 components = -0.0897709 Jy ! Clean residual min=-0.037910 max=0.041213 Jy/beam ! Clean residual mean=-0.000056 rms=0.007987 Jy/beam ! Combined flux in latest and established models = 4.74759 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 91 components and 4.74759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.180729Jy sigma=0.389736 ! Fit after self-cal, rms=0.180052Jy sigma=0.388884 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, 22.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.031007 Jy ! Component: 100 - total flux cleaned = 0.0319413 Jy ! Component: 150 - total flux cleaned = 0.0278284 Jy ! Component: 200 - total flux cleaned = 0.0253115 Jy ! Total flux subtracted in 200 components = 0.0253115 Jy ! Clean residual min=-0.036231 max=0.032071 Jy/beam ! Clean residual mean=-0.000060 rms=0.007478 Jy/beam ! Combined flux in latest and established models = 4.7729 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 103 components and 4.7729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.170396Jy sigma=0.365412 ! Fit after self-cal, rms=0.169689Jy sigma=0.364072 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.169689Jy sigma=0.364072 ! Fit after self-cal, rms=0.159773Jy sigma=0.350820 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7643 mas, bmaj=1.737 mas, bpa=-2.878 degrees ! Estimated noise=3.40429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0308989 Jy ! Component: 100 - total flux cleaned = -0.0438665 Jy ! Component: 150 - total flux cleaned = -0.0498154 Jy ! Component: 200 - total flux cleaned = -0.0538581 Jy ! Total flux subtracted in 200 components = -0.0538581 Jy ! Clean residual min=-0.032576 max=0.030175 Jy/beam ! Clean residual mean=-0.000042 rms=0.006512 Jy/beam ! Combined flux in latest and established models = 4.71904 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 110 components and 4.71904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.150985Jy sigma=0.329404 ! Fit after self-cal, rms=0.150606Jy sigma=0.328944 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00478154 Jy ! Component: 100 - total flux cleaned = -0.0082874 Jy ! Component: 150 - total flux cleaned = -0.0124624 Jy ! Component: 200 - total flux cleaned = -0.0154795 Jy ! Total flux subtracted in 200 components = -0.0154795 Jy ! Clean residual min=-0.030324 max=0.029654 Jy/beam ! Clean residual mean=-0.000041 rms=0.006339 Jy/beam ! Combined flux in latest and established models = 4.70356 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 115 components and 4.70356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.147713Jy sigma=0.321221 ! Fit after self-cal, rms=0.147491Jy sigma=0.320909 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.147491Jy sigma=0.320909 ! Fit after self-cal, rms=0.141689Jy sigma=0.313517 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.927 mas, bmaj=3.39 mas, bpa=3.803 degrees ! Estimated noise=5.65021 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0345707 Jy ! Component: 100 - total flux cleaned = -0.0475387 Jy ! Component: 150 - total flux cleaned = -0.0536235 Jy ! Component: 200 - total flux cleaned = -0.0573548 Jy ! Total flux subtracted in 200 components = -0.0573548 Jy ! Clean residual min=-0.046022 max=0.050110 Jy/beam ! Clean residual mean=-0.000080 rms=0.011479 Jy/beam ! Combined flux in latest and established models = 4.64621 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 125 components and 4.64621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136934Jy sigma=0.312477 ! Fit after self-cal, rms=0.136571Jy sigma=0.310290 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, 10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0461471 Jy ! Component: 100 - total flux cleaned = 0.0558276 Jy ! Component: 150 - total flux cleaned = 0.0682036 Jy ! Component: 200 - total flux cleaned = 0.0801193 Jy ! Total flux subtracted in 200 components = 0.0801193 Jy ! Clean residual min=-0.035622 max=0.033990 Jy/beam ! Clean residual mean=-0.000099 rms=0.009325 Jy/beam ! Combined flux in latest and established models = 4.72633 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 173 components and 4.72633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123658Jy sigma=0.288515 ! Fit after self-cal, rms=0.123143Jy sigma=0.286783 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.764 mas, bmaj=1.737 mas, bpa=-2.88 degrees ! Estimated noise=3.40079 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.764 x 1.737 at -2.88 degrees (North through East) ! Clean map min=-0.022988 max=2.923 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123143Jy sigma=0.286783 ! Fit after self-cal, rms=0.116650Jy sigma=0.269117 ! Inverting map and beam ! Estimated beam: bmin=0.7645 mas, bmaj=1.736 mas, bpa=-2.838 degrees ! Estimated noise=3.3993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000251869 Jy ! Component: 100 - total flux cleaned = -0.00107938 Jy ! Component: 150 - total flux cleaned = -0.00174854 Jy ! Component: 200 - total flux cleaned = -8.37123e-05 Jy ! Total flux subtracted in 200 components = -8.37123e-05 Jy ! Clean residual min=-0.021932 max=0.019176 Jy/beam ! Clean residual mean=-0.000034 rms=0.004307 Jy/beam ! Combined flux in latest and established models = 4.72624 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 200 components and 4.72625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109785Jy sigma=0.248189 ! Fit after self-cal, rms=0.109530Jy sigma=0.247833 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116609 Jy ! Component: 100 - total flux cleaned = 0.00322227 Jy ! Component: 150 - total flux cleaned = 0.00498611 Jy ! Component: 200 - total flux cleaned = 0.00624076 Jy ! Total flux subtracted in 200 components = 0.00624076 Jy ! Clean residual min=-0.021142 max=0.018015 Jy/beam ! Clean residual mean=-0.000035 rms=0.004105 Jy/beam ! Combined flux in latest and established models = 4.73249 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 221 components and 4.73249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106342Jy sigma=0.237669 ! Fit after self-cal, rms=0.106153Jy sigma=0.237513 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106153Jy sigma=0.237513 ! Fit after self-cal, rms=0.103659Jy sigma=0.235141 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6303 mas, bmaj=1.504 mas, bpa=-2.97 degrees ! Estimated noise=4.27365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.15871 Jy ! Component: 100 - total flux cleaned = 2.90421 Jy ! Component: 150 - total flux cleaned = 3.33287 Jy ! Component: 200 - total flux cleaned = 3.61071 Jy ! Total flux subtracted in 200 components = 3.61071 Jy ! Clean residual min=-0.068161 max=0.155421 Jy/beam ! Clean residual mean=0.000104 rms=0.015250 Jy/beam ! Combined flux in latest and established models = 3.6107 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 3.6107 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7646 mas, bmaj=1.737 mas, bpa=-2.811 degrees ! Estimated noise=3.39574 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.2783 Jy ! Component: 100 - total flux cleaned = 0.4337 Jy ! Component: 150 - total flux cleaned = 0.529499 Jy ! Component: 200 - total flux cleaned = 0.600205 Jy ! Total flux subtracted in 200 components = 0.600205 Jy ! Clean residual min=-0.033296 max=0.057030 Jy/beam ! Clean residual mean=0.000045 rms=0.008663 Jy/beam ! Combined flux in latest and established models = 4.21091 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 41 components and 4.21091 Jy ! Inverting map ! Added new window around map position (-8.2, 16.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0601949 Jy ! Component: 100 - total flux cleaned = 0.107887 Jy ! Component: 150 - total flux cleaned = 0.148512 Jy ! Component: 200 - total flux cleaned = 0.1837 Jy ! Total flux subtracted in 200 components = 0.1837 Jy ! Clean residual min=-0.025373 max=0.034776 Jy/beam ! Clean residual mean=0.000012 rms=0.006046 Jy/beam ! Combined flux in latest and established models = 4.39461 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 60 components and 4.39461 Jy ! Inverting map ! Added new window around map position (0.8, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0358069 Jy ! Component: 100 - total flux cleaned = 0.0590106 Jy ! Component: 150 - total flux cleaned = 0.079353 Jy ! Component: 200 - total flux cleaned = 0.0958137 Jy ! Total flux subtracted in 200 components = 0.0958137 Jy ! Clean residual min=-0.021673 max=0.023637 Jy/beam ! Clean residual mean=-0.000003 rms=0.004881 Jy/beam ! Combined flux in latest and established models = 4.49042 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 90 components and 4.49042 Jy ! Inverting map ! Added new window around map position (-31.2, 48.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227385 Jy ! Component: 100 - total flux cleaned = 0.036687 Jy ! Component: 150 - total flux cleaned = 0.0501487 Jy ! Component: 200 - total flux cleaned = 0.0608073 Jy ! Total flux subtracted in 200 components = 0.0608073 Jy ! Clean residual min=-0.019166 max=0.017636 Jy/beam ! Clean residual mean=-0.000009 rms=0.004234 Jy/beam ! Combined flux in latest and established models = 4.55123 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 126 components and 4.55123 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.93 mas, bmaj=3.39 mas, bpa=3.887 degrees ! Estimated noise=5.63602 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0275415 Jy ! Component: 100 - total flux cleaned = 0.0498298 Jy ! Component: 150 - total flux cleaned = 0.0690293 Jy ! Component: 200 - total flux cleaned = 0.0853325 Jy ! Total flux subtracted in 200 components = 0.0853325 Jy ! Clean residual min=-0.028983 max=0.027410 Jy/beam ! Clean residual mean=-0.000058 rms=0.007532 Jy/beam ! Combined flux in latest and established models = 4.63656 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127492 Jy ! Component: 100 - total flux cleaned = 0.0237771 Jy ! Component: 150 - total flux cleaned = 0.0318967 Jy ! Component: 200 - total flux cleaned = 0.0384976 Jy ! Total flux subtracted in 200 components = 0.0384976 Jy ! Clean residual min=-0.027978 max=0.026240 Jy/beam ! Clean residual mean=-0.000069 rms=0.006996 Jy/beam ! Combined flux in latest and established models = 4.67506 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 197 components and 4.67506 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7646 mas, bmaj=1.737 mas, bpa=-2.811 degrees ! Estimated noise=3.39574 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00690406 Jy ! Component: 100 - total flux cleaned = 0.0115989 Jy ! Component: 150 - total flux cleaned = 0.016687 Jy ! Component: 200 - total flux cleaned = 0.019248 Jy ! Total flux subtracted in 200 components = 0.019248 Jy ! Clean residual min=-0.017199 max=0.017061 Jy/beam ! Clean residual mean=-0.000027 rms=0.003404 Jy/beam ! Combined flux in latest and established models = 4.69431 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 233 components and 4.69431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095751Jy sigma=0.216858 ! Fit after self-cal, rms=0.093876Jy sigma=0.210874 wmodel J1733-1304_X_j_map.mod ! Writing 233 model components to file: J1733-1304_X_j_map.mod wobs J1733-1304_X_j_uvs.fits ! Writing UV FITS file: J1733-1304_X_j_uvs.fits wwins J1733-1304_X_j_map.win ! wwins: Wrote 10 windows to J1733-1304_X_j_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00382516 Jy ! Component: 100 - total flux cleaned = -0.0077572 Jy ! Component: 150 - total flux cleaned = -0.0116532 Jy ! Component: 200 - total flux cleaned = -0.012123 Jy ! Component: 250 - total flux cleaned = -0.0116848 Jy ! Component: 300 - total flux cleaned = -0.011266 Jy ! Component: 350 - total flux cleaned = -0.0106586 Jy ! Component: 400 - total flux cleaned = -0.0092757 Jy ! Component: 450 - total flux cleaned = -0.00832096 Jy ! Component: 500 - total flux cleaned = -0.00683128 Jy ! Component: 550 - total flux cleaned = -0.00628909 Jy ! Component: 600 - total flux cleaned = -0.00611153 Jy ! Component: 650 - total flux cleaned = -0.00576677 Jy ! Component: 700 - total flux cleaned = -0.00576527 Jy ! Component: 750 - total flux cleaned = -0.00526889 Jy ! Component: 800 - total flux cleaned = -0.00510447 Jy ! Component: 850 - total flux cleaned = -0.00431675 Jy ! Component: 900 - total flux cleaned = -0.00370764 Jy ! Component: 950 - total flux cleaned = -0.00355862 Jy ! Component: 1000 - total flux cleaned = -0.0031122 Jy ! Component: 1050 - total flux cleaned = -0.00209755 Jy ! Component: 1100 - total flux cleaned = -0.00153113 Jy ! Component: 1150 - total flux cleaned = -0.000971854 Jy ! Component: 1200 - total flux cleaned = -0.000150788 Jy ! Component: 1250 - total flux cleaned = 0.000652802 Jy ! Component: 1300 - total flux cleaned = 0.00104852 Jy ! Component: 1350 - total flux cleaned = 0.00182247 Jy ! Component: 1400 - total flux cleaned = 0.0024554 Jy ! Component: 1450 - total flux cleaned = 0.00344557 Jy ! Component: 1500 - total flux cleaned = 0.00393157 Jy ! Component: 1550 - total flux cleaned = 0.00464445 Jy ! Component: 1600 - total flux cleaned = 0.00464245 Jy ! Component: 1650 - total flux cleaned = 0.00545062 Jy ! Component: 1700 - total flux cleaned = 0.00590208 Jy ! Component: 1750 - total flux cleaned = 0.00634924 Jy ! Component: 1800 - total flux cleaned = 0.00711902 Jy ! Component: 1850 - total flux cleaned = 0.00787456 Jy ! Component: 1900 - total flux cleaned = 0.00851149 Jy ! Component: 1950 - total flux cleaned = 0.00892927 Jy ! Component: 2000 - total flux cleaned = 0.00954582 Jy ! Component: 2050 - total flux cleaned = 0.010253 Jy ! Component: 2100 - total flux cleaned = 0.0107473 Jy ! Component: 2150 - total flux cleaned = 0.0108449 Jy ! Component: 2200 - total flux cleaned = 0.0109392 Jy ! Component: 2250 - total flux cleaned = 0.0111313 Jy ! Component: 2300 - total flux cleaned = 0.0116931 Jy ! Component: 2350 - total flux cleaned = 0.0118764 Jy ! Component: 2400 - total flux cleaned = 0.0119673 Jy ! Component: 2450 - total flux cleaned = 0.0122366 Jy ! Component: 2500 - total flux cleaned = 0.0124144 Jy ! Component: 2550 - total flux cleaned = 0.0125007 Jy ! Component: 2600 - total flux cleaned = 0.0128434 Jy ! Component: 2650 - total flux cleaned = 0.0132681 Jy ! Component: 2700 - total flux cleaned = 0.0131854 Jy ! Component: 2750 - total flux cleaned = 0.0133528 Jy ! Component: 2800 - total flux cleaned = 0.0135974 Jy ! Component: 2850 - total flux cleaned = 0.0136785 Jy ! Component: 2900 - total flux cleaned = 0.0135992 Jy ! Component: 2950 - total flux cleaned = 0.0139895 Jy ! Component: 3000 - total flux cleaned = 0.0137561 Jy ! Component: 3050 - total flux cleaned = 0.0142111 Jy ! Component: 3100 - total flux cleaned = 0.0141354 Jy ! Component: 3150 - total flux cleaned = 0.0142839 Jy ! Component: 3200 - total flux cleaned = 0.0143563 Jy ! Component: 3250 - total flux cleaned = 0.0145733 Jy ! Component: 3300 - total flux cleaned = 0.0144321 Jy ! Component: 3350 - total flux cleaned = 0.0147847 Jy ! Component: 3400 - total flux cleaned = 0.0150612 Jy ! Component: 3450 - total flux cleaned = 0.0147861 Jy ! Component: 3500 - total flux cleaned = 0.0149898 Jy ! Component: 3550 - total flux cleaned = 0.0151243 Jy ! Component: 3600 - total flux cleaned = 0.014859 Jy ! Component: 3650 - total flux cleaned = 0.0149908 Jy ! Component: 3700 - total flux cleaned = 0.0146016 Jy ! Component: 3750 - total flux cleaned = 0.0148584 Jy ! Component: 3800 - total flux cleaned = 0.0147308 Jy ! Component: 3850 - total flux cleaned = 0.0146053 Jy ! Component: 3900 - total flux cleaned = 0.0149152 Jy ! Component: 3950 - total flux cleaned = 0.01467 Jy ! Component: 4000 - total flux cleaned = 0.0146698 Jy ! Component: 4050 - total flux cleaned = 0.0149087 Jy ! Total flux subtracted in 4096 components = 0.0148484 Jy ! Clean residual min=-0.003143 max=0.002981 Jy/beam ! Clean residual mean=-0.000006 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 4.70916 Jy keep ! Adding 357 model components to the UV plane model. ! The established model now contains 589 components and 4.70916 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1733-1304_X_j_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7646 x 1.737 at -2.811 degrees (North through East) ! Clean map min=-0.01065 max=2.9519 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1733-1304_X_j_map.fits wmodel /image_prod/ug002_uva//J1733-1304_X_j_map.mod ! Writing 589 model components to file: /image_prod/ug002_uva//J1733-1304_X_j_map.mod wobs /image_prod/ug002_uva//J1733-1304_X_j_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1733-1304_X_j_uvs.fits wwins /image_prod/ug002_uva//J1733-1304_X_j_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J1733-1304_X_j_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 2.9519 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00107452 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.109203 0.109203 0.218406 0.436812 0.873623 1.74725 3.49449 6.98898 13.978 27.9559 55.9119 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0032 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.951 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2747.18 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1733-1304_X_j_dfm.log closed on Thu Mar 5 03:18:08 2020