! Started logfile: /image_prod/ug002_uva//J1733-1304_X_g_dfm.log on Thu Mar 5 03:17:48 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1733-1304_X_g_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1733-1304_X_g_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.587654 visibilities/baseline/integration-bin. ! Found source: J1733-1304 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 5712 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1733-1304_X_g] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=3.435635Jy sigma=8.050845 ! Fit after self-cal, rms=2.393306Jy sigma=5.134002 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6185 mas, bmaj=1.499 mas, bpa=-5.215 degrees ! Estimated noise=4.68217 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.98101 Jy ! Component: 100 - total flux cleaned = 2.68265 Jy ! Total flux subtracted in 100 components = 2.68265 Jy ! Clean residual min=-0.181330 max=0.330417 Jy/beam ! Clean residual mean=0.000005 rms=0.038456 Jy/beam ! Combined flux in latest and established models = 2.68265 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 2.68265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.154156Jy sigma=2.427563 ! Fit after self-cal, rms=1.145332Jy sigma=2.408397 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.401651 Jy ! Component: 100 - total flux cleaned = 0.652847 Jy ! Total flux subtracted in 100 components = 0.652847 Jy ! Clean residual min=-0.159215 max=0.202403 Jy/beam ! Clean residual mean=0.000072 rms=0.031133 Jy/beam ! Combined flux in latest and established models = 3.3355 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 12 components and 3.3355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.818004Jy sigma=1.933326 ! Fit after self-cal, rms=0.813680Jy sigma=1.926072 ! Inverting map ! Added new window around map position (-1.8, -20.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200521 Jy ! Component: 100 - total flux cleaned = 0.34011 Jy ! Total flux subtracted in 100 components = 0.34011 Jy ! Clean residual min=-0.148202 max=0.179617 Jy/beam ! Clean residual mean=0.000094 rms=0.028385 Jy/beam ! Combined flux in latest and established models = 3.67561 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 19 components and 3.67561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.711620Jy sigma=1.760037 ! Fit after self-cal, rms=0.705538Jy sigma=1.747220 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7496 mas, bmaj=1.677 mas, bpa=-4.128 degrees ! Estimated noise=3.67808 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24.4, -22.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.213511 Jy ! Component: 100 - total flux cleaned = 0.360273 Jy ! Component: 150 - total flux cleaned = 0.476594 Jy ! Component: 200 - total flux cleaned = 0.571131 Jy ! Total flux subtracted in 200 components = 0.571131 Jy ! Clean residual min=-0.143933 max=0.154203 Jy/beam ! Clean residual mean=0.000256 rms=0.031625 Jy/beam ! Combined flux in latest and established models = 4.24674 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 60 components and 4.24674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.587262Jy sigma=1.518995 ! Fit after self-cal, rms=0.577647Jy sigma=1.503722 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7496 x 1.677 at -4.128 degrees (North through East) ! Clean map min=-0.13384 max=2.6378 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.90 HN 0.99 KP 1.00 ! LA 0.97 MK 1.08 NL 1.15 OV 0.90 ! PT 1.18 SC 0.96 ! ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.88 HN 0.93 KP 1.00 ! LA 0.98 MK 1.04 NL 1.13 OV 0.89 ! PT 1.26 SC 1.00 ! ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.87 HN 0.95 KP 1.01 ! LA 1.02 MK 1.02 NL 1.11 OV 0.88 ! PT 1.17 SC 1.00 ! ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.87 HN 0.98 KP 1.01 ! LA 0.96 MK 1.06 NL 1.14 OV 0.90 ! PT 1.23 SC 0.99 ! ! ! Correcting IF 5. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.89 HN 0.97 KP 0.99 ! LA 0.99 MK 1.02 NL 1.13 OV 0.90 ! PT 1.17 SC 0.98 ! ! ! Correcting IF 6. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.90 HN 0.96 KP 1.02 ! LA 1.02 MK 0.99 NL 1.10 OV 0.91 ! PT 1.24 SC 0.99 ! ! ! Correcting IF 7. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.88 HN 0.95 KP 0.99 ! LA 0.97 MK 1.02 NL 1.09 OV 0.92 ! PT 1.28 SC 1.05 ! ! ! Correcting IF 8. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.89 HN 0.99 KP 1.02 ! LA 0.96 MK 1.01 NL 1.11 OV 0.90 ! PT 1.28 SC 1.00 ! ! ! Correcting IF 9. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.88 HN 0.96 KP 1.01 ! LA 1.00 MK 1.04 NL 1.08 OV 0.91 ! PT 1.15 SC 0.98 ! ! ! Correcting IF 10. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.87 HN 0.99 KP 1.00 ! LA 0.97 MK 1.03 NL 1.08 OV 0.90 ! PT 1.21 SC 1.00 ! ! ! Correcting IF 11. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.87 HN 0.96 KP 1.01 ! LA 0.96 MK 1.01 NL 1.05 OV 0.92 ! PT 1.31 SC 1.01 ! ! ! Correcting IF 12. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.86 HN 1.00 KP 0.98 ! LA 1.01 MK 1.01 NL 1.06 OV 0.89 ! PT 1.25 SC 0.99 ! ! ! Fit before self-cal, rms=0.577647Jy sigma=1.503722 ! Fit after self-cal, rms=0.547634Jy sigma=1.111704 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7475 mas, bmaj=1.729 mas, bpa=-4.934 degrees ! Estimated noise=3.80599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0826238 Jy ! Component: 100 - total flux cleaned = 0.1227 Jy ! Component: 150 - total flux cleaned = 0.140077 Jy ! Component: 200 - total flux cleaned = 0.15157 Jy ! Total flux subtracted in 200 components = 0.15157 Jy ! Clean residual min=-0.095712 max=0.091086 Jy/beam ! Clean residual mean=0.000280 rms=0.022290 Jy/beam ! Combined flux in latest and established models = 4.39831 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 77 components and 4.39831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.520584Jy sigma=1.066212 ! Fit after self-cal, rms=0.519772Jy sigma=1.062875 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.519772Jy sigma=1.062875 ! Fit after self-cal, rms=0.258987Jy sigma=0.611384 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7478 mas, bmaj=1.724 mas, bpa=-5.244 degrees ! Estimated noise=3.7983 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0402062 Jy ! Component: 100 - total flux cleaned = -0.0546389 Jy ! Component: 150 - total flux cleaned = -0.0663479 Jy ! Component: 200 - total flux cleaned = -0.074808 Jy ! Total flux subtracted in 200 components = -0.074808 Jy ! Clean residual min=-0.046979 max=0.070304 Jy/beam ! Clean residual mean=0.000196 rms=0.010017 Jy/beam ! Combined flux in latest and established models = 4.3235 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 91 components and 4.3235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.231393Jy sigma=0.558975 ! Fit after self-cal, rms=0.230911Jy sigma=0.552244 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0651707 Jy ! Component: 100 - total flux cleaned = 0.065561 Jy ! Component: 150 - total flux cleaned = 0.0618889 Jy ! Component: 200 - total flux cleaned = 0.0586045 Jy ! Total flux subtracted in 200 components = 0.0586045 Jy ! Clean residual min=-0.041284 max=0.053872 Jy/beam ! Clean residual mean=0.000196 rms=0.008611 Jy/beam ! Combined flux in latest and established models = 4.3821 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 103 components and 4.38211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.204955Jy sigma=0.482382 ! Fit after self-cal, rms=0.203898Jy sigma=0.478133 ! Inverting map ! Added new window around map position (0.6, 10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281392 Jy ! Component: 100 - total flux cleaned = 0.0232972 Jy ! Component: 150 - total flux cleaned = 0.0182144 Jy ! Component: 200 - total flux cleaned = 0.0145693 Jy ! Total flux subtracted in 200 components = 0.0145693 Jy ! Clean residual min=-0.035126 max=0.032777 Jy/beam ! Clean residual mean=0.000187 rms=0.007882 Jy/beam ! Combined flux in latest and established models = 4.39668 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 114 components and 4.39667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189620Jy sigma=0.434606 ! Fit after self-cal, rms=0.188527Jy sigma=0.432890 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.188527Jy sigma=0.432890 ! Fit after self-cal, rms=0.178993Jy sigma=0.410508 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7457 mas, bmaj=1.718 mas, bpa=-5.268 degrees ! Estimated noise=3.7783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0282956 Jy ! Component: 100 - total flux cleaned = -0.0345442 Jy ! Component: 150 - total flux cleaned = -0.0388461 Jy ! Component: 200 - total flux cleaned = -0.0425991 Jy ! Total flux subtracted in 200 components = -0.0425991 Jy ! Clean residual min=-0.029027 max=0.031178 Jy/beam ! Clean residual mean=0.000163 rms=0.006633 Jy/beam ! Combined flux in latest and established models = 4.35408 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 127 components and 4.35408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165034Jy sigma=0.381513 ! Fit after self-cal, rms=0.163935Jy sigma=0.378639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154175 Jy ! Component: 100 - total flux cleaned = 0.0146873 Jy ! Component: 150 - total flux cleaned = 0.0146523 Jy ! Component: 200 - total flux cleaned = 0.0139779 Jy ! Total flux subtracted in 200 components = 0.0139779 Jy ! Clean residual min=-0.027138 max=0.027104 Jy/beam ! Clean residual mean=0.000159 rms=0.006142 Jy/beam ! Combined flux in latest and established models = 4.36805 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 141 components and 4.36805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.155312Jy sigma=0.359046 ! Fit after self-cal, rms=0.154767Jy sigma=0.358051 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.154767Jy sigma=0.358051 ! Fit after self-cal, rms=0.150052Jy sigma=0.348999 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.961 mas, bmaj=3.228 mas, bpa=-1.917 degrees ! Estimated noise=6.42551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0195621 Jy ! Component: 100 - total flux cleaned = -0.0207032 Jy ! Component: 150 - total flux cleaned = -0.020777 Jy ! Component: 200 - total flux cleaned = -0.0207753 Jy ! Total flux subtracted in 200 components = -0.0207753 Jy ! Clean residual min=-0.043102 max=0.039600 Jy/beam ! Clean residual mean=0.000413 rms=0.011256 Jy/beam ! Combined flux in latest and established models = 4.34728 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 167 components and 4.34728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141499Jy sigma=0.338777 ! Fit after self-cal, rms=0.140151Jy sigma=0.333815 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00321491 Jy ! Component: 100 - total flux cleaned = 0.000981587 Jy ! Component: 150 - total flux cleaned = 0.00508593 Jy ! Component: 200 - total flux cleaned = 0.00760045 Jy ! Total flux subtracted in 200 components = 0.00760045 Jy ! Clean residual min=-0.040495 max=0.037619 Jy/beam ! Clean residual mean=0.000401 rms=0.010858 Jy/beam ! Combined flux in latest and established models = 4.35488 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 188 components and 4.35488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.137594Jy sigma=0.332604 ! Fit after self-cal, rms=0.137465Jy sigma=0.331373 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7447 mas, bmaj=1.716 mas, bpa=-5.214 degrees ! Estimated noise=3.76388 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7447 x 1.716 at -5.214 degrees (North through East) ! Clean map min=-0.020788 max=2.6769 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.137465Jy sigma=0.331373 ! Fit after self-cal, rms=0.130264Jy sigma=0.306103 ! Inverting map and beam ! Estimated beam: bmin=0.744 mas, bmaj=1.714 mas, bpa=-4.991 degrees ! Estimated noise=3.7688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0134137 Jy ! Component: 100 - total flux cleaned = -0.0153219 Jy ! Component: 150 - total flux cleaned = -0.0163886 Jy ! Component: 200 - total flux cleaned = -0.0173646 Jy ! Total flux subtracted in 200 components = -0.0173646 Jy ! Clean residual min=-0.020008 max=0.019913 Jy/beam ! Clean residual mean=0.000119 rms=0.004583 Jy/beam ! Combined flux in latest and established models = 4.33751 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 201 components and 4.33751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.124110Jy sigma=0.290202 ! Fit after self-cal, rms=0.123299Jy sigma=0.288678 ! Inverting map ! Added new window around map position (11, -49.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156399 Jy ! Component: 100 - total flux cleaned = 0.0180104 Jy ! Component: 150 - total flux cleaned = 0.0184381 Jy ! Component: 200 - total flux cleaned = 0.0188451 Jy ! Total flux subtracted in 200 components = 0.0188451 Jy ! Clean residual min=-0.018356 max=0.017621 Jy/beam ! Clean residual mean=0.000108 rms=0.004256 Jy/beam ! Combined flux in latest and established models = 4.35636 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 216 components and 4.35636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117501Jy sigma=0.276453 ! Fit after self-cal, rms=0.117192Jy sigma=0.275623 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117192Jy sigma=0.275623 ! Fit after self-cal, rms=0.114742Jy sigma=0.272122 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6099 mas, bmaj=1.51 mas, bpa=-5.332 degrees ! Estimated noise=4.74514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.98392 Jy ! Component: 100 - total flux cleaned = 2.70388 Jy ! Component: 150 - total flux cleaned = 3.11722 Jy ! Component: 200 - total flux cleaned = 3.38151 Jy ! Total flux subtracted in 200 components = 3.38151 Jy ! Clean residual min=-0.067692 max=0.153421 Jy/beam ! Clean residual mean=0.000010 rms=0.015391 Jy/beam ! Combined flux in latest and established models = 3.38151 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 3.38151 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7433 mas, bmaj=1.712 mas, bpa=-4.984 degrees ! Estimated noise=3.75957 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.248841 Jy ! Component: 100 - total flux cleaned = 0.389362 Jy ! Component: 150 - total flux cleaned = 0.478557 Jy ! Component: 200 - total flux cleaned = 0.546728 Jy ! Total flux subtracted in 200 components = 0.546728 Jy ! Clean residual min=-0.032181 max=0.055561 Jy/beam ! Clean residual mean=0.000092 rms=0.008154 Jy/beam ! Combined flux in latest and established models = 3.92824 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 42 components and 3.92824 Jy ! Inverting map ! Added new window around map position (0.8, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0590532 Jy ! Component: 100 - total flux cleaned = 0.105073 Jy ! Component: 150 - total flux cleaned = 0.134415 Jy ! Component: 200 - total flux cleaned = 0.158689 Jy ! Total flux subtracted in 200 components = 0.158689 Jy ! Clean residual min=-0.024501 max=0.032028 Jy/beam ! Clean residual mean=0.000102 rms=0.005781 Jy/beam ! Combined flux in latest and established models = 4.08693 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 70 components and 4.08693 Jy ! Inverting map ! Added new window around map position (-1, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0267014 Jy ! Component: 100 - total flux cleaned = 0.0448263 Jy ! Component: 150 - total flux cleaned = 0.0621993 Jy ! Component: 200 - total flux cleaned = 0.0771715 Jy ! Total flux subtracted in 200 components = 0.0771715 Jy ! Clean residual min=-0.021103 max=0.022252 Jy/beam ! Clean residual mean=0.000103 rms=0.004803 Jy/beam ! Combined flux in latest and established models = 4.1641 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 93 components and 4.1641 Jy ! Inverting map ! Added new window around map position (-16, -39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020593 Jy ! Component: 100 - total flux cleaned = 0.0341271 Jy ! Component: 150 - total flux cleaned = 0.0472505 Jy ! Component: 200 - total flux cleaned = 0.0600343 Jy ! Total flux subtracted in 200 components = 0.0600343 Jy ! Clean residual min=-0.019187 max=0.018644 Jy/beam ! Clean residual mean=0.000108 rms=0.004236 Jy/beam ! Combined flux in latest and established models = 4.22414 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 118 components and 4.22414 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.96 mas, bmaj=3.219 mas, bpa=-1.759 degrees ! Estimated noise=6.44009 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030166 Jy ! Component: 100 - total flux cleaned = 0.051365 Jy ! Component: 150 - total flux cleaned = 0.0683939 Jy ! Component: 200 - total flux cleaned = 0.0826879 Jy ! Total flux subtracted in 200 components = 0.0826879 Jy ! Clean residual min=-0.026369 max=0.028877 Jy/beam ! Clean residual mean=0.000313 rms=0.008374 Jy/beam ! Combined flux in latest and established models = 4.30682 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117972 Jy ! Component: 100 - total flux cleaned = 0.0209176 Jy ! Component: 150 - total flux cleaned = 0.0290255 Jy ! Component: 200 - total flux cleaned = 0.0365854 Jy ! Total flux subtracted in 200 components = 0.0365854 Jy ! Clean residual min=-0.024438 max=0.027626 Jy/beam ! Clean residual mean=0.000301 rms=0.007949 Jy/beam ! Combined flux in latest and established models = 4.34341 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 202 components and 4.34341 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7433 mas, bmaj=1.712 mas, bpa=-4.984 degrees ! Estimated noise=3.75957 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103971 Jy ! Component: 100 - total flux cleaned = -0.00103558 Jy ! Component: 150 - total flux cleaned = -0.00107632 Jy ! Component: 200 - total flux cleaned = 0.000532618 Jy ! Total flux subtracted in 200 components = 0.000532618 Jy ! Clean residual min=-0.016760 max=0.016350 Jy/beam ! Clean residual mean=0.000101 rms=0.003583 Jy/beam ! Combined flux in latest and established models = 4.34394 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 224 components and 4.34394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105045Jy sigma=0.247743 ! Fit after self-cal, rms=0.102100Jy sigma=0.240747 wmodel J1733-1304_X_g_map.mod ! Writing 224 model components to file: J1733-1304_X_g_map.mod wobs J1733-1304_X_g_uvs.fits ! Writing UV FITS file: J1733-1304_X_g_uvs.fits wwins J1733-1304_X_g_map.win ! wwins: Wrote 10 windows to J1733-1304_X_g_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310935 Jy ! Component: 100 - total flux cleaned = 0.000297209 Jy ! Component: 150 - total flux cleaned = 0.0005349 Jy ! Component: 200 - total flux cleaned = 0.00148671 Jy ! Component: 250 - total flux cleaned = 0.0019394 Jy ! Component: 300 - total flux cleaned = 0.00238174 Jy ! Component: 350 - total flux cleaned = 0.00281066 Jy ! Component: 400 - total flux cleaned = 0.00301948 Jy ! Component: 450 - total flux cleaned = 0.00301719 Jy ! Component: 500 - total flux cleaned = 0.00222897 Jy ! Component: 550 - total flux cleaned = 0.00165491 Jy ! Component: 600 - total flux cleaned = 0.00146391 Jy ! Component: 650 - total flux cleaned = 0.000352733 Jy ! Component: 700 - total flux cleaned = -0.000191475 Jy ! Component: 750 - total flux cleaned = -0.000899658 Jy ! Component: 800 - total flux cleaned = -0.00124537 Jy ! Component: 850 - total flux cleaned = -0.00141659 Jy ! Component: 900 - total flux cleaned = -0.00208317 Jy ! Component: 950 - total flux cleaned = -0.00225089 Jy ! Component: 1000 - total flux cleaned = -0.00273517 Jy ! Component: 1050 - total flux cleaned = -0.00305059 Jy ! Component: 1100 - total flux cleaned = -0.00274133 Jy ! Component: 1150 - total flux cleaned = -0.00335277 Jy ! Component: 1200 - total flux cleaned = -0.00335076 Jy ! Component: 1250 - total flux cleaned = -0.00334821 Jy ! Component: 1300 - total flux cleaned = -0.00334415 Jy ! Component: 1350 - total flux cleaned = -0.00334241 Jy ! Component: 1400 - total flux cleaned = -0.00320043 Jy ! Component: 1450 - total flux cleaned = -0.00306601 Jy ! Component: 1500 - total flux cleaned = -0.0032046 Jy ! Component: 1550 - total flux cleaned = -0.00307198 Jy ! Component: 1600 - total flux cleaned = -0.00333422 Jy ! Component: 1650 - total flux cleaned = -0.00307687 Jy ! Component: 1700 - total flux cleaned = -0.00320481 Jy ! Component: 1750 - total flux cleaned = -0.00320313 Jy ! Component: 1800 - total flux cleaned = -0.00308075 Jy ! Component: 1850 - total flux cleaned = -0.00296038 Jy ! Component: 1900 - total flux cleaned = -0.00284334 Jy ! Component: 1950 - total flux cleaned = -0.0028458 Jy ! Component: 2000 - total flux cleaned = -0.0028457 Jy ! Component: 2050 - total flux cleaned = -0.00261951 Jy ! Component: 2100 - total flux cleaned = -0.0026217 Jy ! Component: 2150 - total flux cleaned = -0.00250781 Jy ! Component: 2200 - total flux cleaned = -0.00239973 Jy ! Component: 2250 - total flux cleaned = -0.00261702 Jy ! Component: 2300 - total flux cleaned = -0.00240175 Jy ! Component: 2350 - total flux cleaned = -0.00271782 Jy ! Component: 2400 - total flux cleaned = -0.0030303 Jy ! Component: 2450 - total flux cleaned = -0.00272114 Jy ! Component: 2500 - total flux cleaned = -0.00292649 Jy ! Component: 2550 - total flux cleaned = -0.00302632 Jy ! Component: 2600 - total flux cleaned = -0.00272776 Jy ! Component: 2650 - total flux cleaned = -0.0025328 Jy ! Component: 2700 - total flux cleaned = -0.00282555 Jy ! Component: 2750 - total flux cleaned = -0.00282479 Jy ! Component: 2800 - total flux cleaned = -0.00320272 Jy ! Component: 2850 - total flux cleaned = -0.00301372 Jy ! Component: 2900 - total flux cleaned = -0.00301393 Jy ! Component: 2950 - total flux cleaned = -0.00283123 Jy ! Component: 3000 - total flux cleaned = -0.00283062 Jy ! Component: 3050 - total flux cleaned = -0.00318816 Jy ! Component: 3100 - total flux cleaned = -0.002923 Jy ! Component: 3150 - total flux cleaned = -0.003098 Jy ! Component: 3200 - total flux cleaned = -0.00326977 Jy ! Component: 3250 - total flux cleaned = -0.00292779 Jy ! Component: 3300 - total flux cleaned = -0.00309599 Jy ! Component: 3350 - total flux cleaned = -0.00309763 Jy ! Component: 3400 - total flux cleaned = -0.00342962 Jy ! Component: 3450 - total flux cleaned = -0.00351102 Jy ! Component: 3500 - total flux cleaned = -0.00343103 Jy ! Component: 3550 - total flux cleaned = -0.00343052 Jy ! Component: 3600 - total flux cleaned = -0.00335169 Jy ! Component: 3650 - total flux cleaned = -0.00374524 Jy ! Component: 3700 - total flux cleaned = -0.00351074 Jy ! Component: 3750 - total flux cleaned = -0.00374156 Jy ! Component: 3800 - total flux cleaned = -0.00366427 Jy ! Component: 3850 - total flux cleaned = -0.00389043 Jy ! Component: 3900 - total flux cleaned = -0.00359121 Jy ! Component: 3950 - total flux cleaned = -0.00359221 Jy ! Component: 4000 - total flux cleaned = -0.00388566 Jy ! Component: 4050 - total flux cleaned = -0.00395868 Jy ! Total flux subtracted in 4096 components = -0.00395965 Jy ! Clean residual min=-0.004526 max=0.004118 Jy/beam ! Clean residual mean=0.000032 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 4.33998 Jy keep ! Adding 359 model components to the UV plane model. ! The established model now contains 583 components and 4.33998 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1733-1304_X_g_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7433 x 1.712 at -4.984 degrees (North through East) ! Clean map min=-0.0098316 max=2.7007 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1733-1304_X_g_map.fits wmodel /image_prod/ug002_uva//J1733-1304_X_g_map.mod ! Writing 583 model components to file: /image_prod/ug002_uva//J1733-1304_X_g_map.mod wobs /image_prod/ug002_uva//J1733-1304_X_g_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1733-1304_X_g_uvs.fits wwins /image_prod/ug002_uva//J1733-1304_X_g_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J1733-1304_X_g_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 2.70073 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00132364 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.147031 0.147031 0.294062 0.588125 1.17625 2.3525 4.705 9.40999 18.82 37.64 75.28 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.7 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2040.38 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1733-1304_X_g_dfm.log closed on Thu Mar 5 03:17:52 2020