! Started logfile: /image_prod/ug002_uva//J1733-1304_X_c_dfm.log on Thu Mar 5 03:17:36 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1733-1304_X_c_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1733-1304_X_c_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.908333 visibilities/baseline/integration-bin. ! Found source: J1733-1304 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 3924 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1733-1304_X_c] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=4.180816Jy sigma=13.867855 ! Fit after self-cal, rms=3.111098Jy sigma=9.527085 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.568 mas, bmaj=1.539 mas, bpa=-0.356 degrees ! Estimated noise=4.27162 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.48407 Jy ! Component: 100 - total flux cleaned = 3.30375 Jy ! Total flux subtracted in 100 components = 3.30375 Jy ! Clean residual min=-0.247157 max=0.421302 Jy/beam ! Clean residual mean=-0.000040 rms=0.055277 Jy/beam ! Combined flux in latest and established models = 3.30375 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 3.30375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.259103Jy sigma=3.520938 ! Fit after self-cal, rms=1.256758Jy sigma=3.513501 ! Inverting map ! Added new window around map position (0, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.505603 Jy ! Component: 100 - total flux cleaned = 0.850185 Jy ! Total flux subtracted in 100 components = 0.850185 Jy ! Clean residual min=-0.175956 max=0.190502 Jy/beam ! Clean residual mean=-0.000033 rms=0.032844 Jy/beam ! Combined flux in latest and established models = 4.15393 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 4.15393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.727779Jy sigma=2.060004 ! Fit after self-cal, rms=0.724560Jy sigma=2.043644 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.243269 Jy ! Component: 100 - total flux cleaned = 0.410951 Jy ! Total flux subtracted in 100 components = 0.410951 Jy ! Clean residual min=-0.148771 max=0.135216 Jy/beam ! Clean residual mean=-0.000030 rms=0.024307 Jy/beam ! Combined flux in latest and established models = 4.56488 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 4.56488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.519401Jy sigma=1.502636 ! Fit after self-cal, rms=0.519090Jy sigma=1.495928 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6719 mas, bmaj=1.724 mas, bpa=-0.07348 degrees ! Estimated noise=3.37017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24.8, 36.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.209413 Jy ! Component: 100 - total flux cleaned = 0.343744 Jy ! Component: 150 - total flux cleaned = 0.438513 Jy ! Component: 200 - total flux cleaned = 0.507089 Jy ! Total flux subtracted in 200 components = 0.507089 Jy ! Clean residual min=-0.107683 max=0.120348 Jy/beam ! Clean residual mean=-0.000101 rms=0.022859 Jy/beam ! Combined flux in latest and established models = 5.07197 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 47 components and 5.07197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.363540Jy sigma=1.080884 ! Fit after self-cal, rms=0.355441Jy sigma=1.044054 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6719 x 1.724 at -0.07348 degrees (North through East) ! Clean map min=-0.092815 max=3.4049 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.98 KP 1.05 ! LA 0.98 MK 1.01 NL 1.11 OV 0.99 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 1.00 KP 1.05 ! LA 0.98 MK 1.01 NL 1.11 OV 0.99 ! PT 0.88 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.01 KP 1.04 ! LA 0.99 MK 0.96 NL 1.09 OV 1.00 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.98 KP 1.04 ! LA 0.99 MK 0.99 NL 1.09 OV 1.00 ! PT 0.88 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.00 KP 1.06 ! LA 0.99 MK 0.99 NL 1.07 OV 1.01 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.00 KP 1.05 ! LA 1.00 MK 0.99 NL 1.08 OV 0.99 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.02 KP 1.05 ! LA 0.99 MK 1.00 NL 1.08 OV 0.99 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.01 KP 1.04 ! LA 1.00 MK 1.01 NL 1.08 OV 0.99 ! PT 0.88 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.02 KP 1.07 ! LA 1.00 MK 0.99 NL 1.07 OV 1.00 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.00 KP 1.04 ! LA 0.99 MK 1.01 NL 1.08 OV 1.00 ! PT 0.88 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.00 KP 1.06 ! LA 1.00 MK 1.01 NL 1.08 OV 1.01 ! PT 0.89 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.03 KP 1.04 ! LA 0.99 MK 1.02 NL 1.10 OV 1.03 ! PT 0.87 SC 1.03 ! ! ! Fit before self-cal, rms=0.355441Jy sigma=1.044054 ! Fit after self-cal, rms=0.164169Jy sigma=0.501966 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6745 mas, bmaj=1.729 mas, bpa=-0.05554 degrees ! Estimated noise=3.3466 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0328012 Jy ! Component: 100 - total flux cleaned = 0.0436916 Jy ! Component: 150 - total flux cleaned = 0.0518714 Jy ! Component: 200 - total flux cleaned = 0.0580024 Jy ! Total flux subtracted in 200 components = 0.0580024 Jy ! Clean residual min=-0.032793 max=0.035002 Jy/beam ! Clean residual mean=-0.000010 rms=0.007230 Jy/beam ! Combined flux in latest and established models = 5.12997 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 71 components and 5.12997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.142653Jy sigma=0.431064 ! Fit after self-cal, rms=0.141550Jy sigma=0.428836 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141550Jy sigma=0.428836 ! Fit after self-cal, rms=0.139490Jy sigma=0.424049 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6743 mas, bmaj=1.73 mas, bpa=-0.05248 degrees ! Estimated noise=3.34041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00370391 Jy ! Component: 100 - total flux cleaned = 0.000877566 Jy ! Component: 150 - total flux cleaned = 0.00546237 Jy ! Component: 200 - total flux cleaned = 0.00950051 Jy ! Total flux subtracted in 200 components = 0.00950051 Jy ! Clean residual min=-0.028052 max=0.032315 Jy/beam ! Clean residual mean=-0.000008 rms=0.006518 Jy/beam ! Combined flux in latest and established models = 5.13948 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 76 components and 5.13947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.131278Jy sigma=0.396438 ! Fit after self-cal, rms=0.131115Jy sigma=0.395261 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, 11.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294073 Jy ! Component: 100 - total flux cleaned = 0.0438674 Jy ! Component: 150 - total flux cleaned = 0.0508225 Jy ! Component: 200 - total flux cleaned = 0.0565631 Jy ! Total flux subtracted in 200 components = 0.0565631 Jy ! Clean residual min=-0.024975 max=0.026273 Jy/beam ! Clean residual mean=-0.000011 rms=0.005653 Jy/beam ! Combined flux in latest and established models = 5.19604 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 97 components and 5.19604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121719Jy sigma=0.364146 ! Fit after self-cal, rms=0.121457Jy sigma=0.363384 ! Inverting map ! Added new window around map position (-7.2, 19.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0228653 Jy ! Component: 100 - total flux cleaned = 0.0318904 Jy ! Component: 150 - total flux cleaned = 0.0375677 Jy ! Component: 200 - total flux cleaned = 0.0423863 Jy ! Total flux subtracted in 200 components = 0.0423863 Jy ! Clean residual min=-0.022926 max=0.020608 Jy/beam ! Clean residual mean=-0.000005 rms=0.005003 Jy/beam ! Combined flux in latest and established models = 5.23842 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 129 components and 5.23842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114379Jy sigma=0.343625 ! Fit after self-cal, rms=0.113990Jy sigma=0.343069 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113990Jy sigma=0.343069 ! Fit after self-cal, rms=0.111504Jy sigma=0.338257 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6743 mas, bmaj=1.73 mas, bpa=-0.05213 degrees ! Estimated noise=3.33462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00599022 Jy ! Component: 100 - total flux cleaned = -0.00190608 Jy ! Component: 150 - total flux cleaned = 0.00133259 Jy ! Component: 200 - total flux cleaned = 0.00399138 Jy ! Total flux subtracted in 200 components = 0.00399138 Jy ! Clean residual min=-0.020963 max=0.018269 Jy/beam ! Clean residual mean=-0.000004 rms=0.004548 Jy/beam ! Combined flux in latest and established models = 5.24242 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 141 components and 5.24241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108071Jy sigma=0.327661 ! Fit after self-cal, rms=0.107784Jy sigma=0.327290 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000824597 Jy ! Component: 100 - total flux cleaned = 0.00353832 Jy ! Component: 150 - total flux cleaned = 0.00580713 Jy ! Component: 200 - total flux cleaned = 0.00795321 Jy ! Total flux subtracted in 200 components = 0.00795321 Jy ! Clean residual min=-0.020086 max=0.017154 Jy/beam ! Clean residual mean=-0.000003 rms=0.004397 Jy/beam ! Combined flux in latest and established models = 5.25037 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 147 components and 5.25037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106142Jy sigma=0.321868 ! Fit after self-cal, rms=0.106071Jy sigma=0.321761 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106071Jy sigma=0.321761 ! Fit after self-cal, rms=0.104732Jy sigma=0.319668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.831 mas, bmaj=3.615 mas, bpa=9.868 degrees ! Estimated noise=6.07862 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117423 Jy ! Component: 100 - total flux cleaned = 0.0194242 Jy ! Component: 150 - total flux cleaned = 0.0246239 Jy ! Component: 200 - total flux cleaned = 0.0274183 Jy ! Total flux subtracted in 200 components = 0.0274183 Jy ! Clean residual min=-0.029913 max=0.037011 Jy/beam ! Clean residual mean=-0.000001 rms=0.009642 Jy/beam ! Combined flux in latest and established models = 5.27779 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 160 components and 5.27779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102189Jy sigma=0.317465 ! Fit after self-cal, rms=0.102094Jy sigma=0.316564 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295371 Jy ! Component: 100 - total flux cleaned = 0.00503639 Jy ! Component: 150 - total flux cleaned = 0.00685821 Jy ! Component: 200 - total flux cleaned = 0.00849649 Jy ! Total flux subtracted in 200 components = 0.00849649 Jy ! Clean residual min=-0.028331 max=0.036876 Jy/beam ! Clean residual mean=0.000001 rms=0.009373 Jy/beam ! Combined flux in latest and established models = 5.28628 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 165 components and 5.28628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101626Jy sigma=0.319525 ! Fit after self-cal, rms=0.101551Jy sigma=0.319219 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.6744 mas, bmaj=1.73 mas, bpa=-0.05859 degrees ! Estimated noise=3.33121 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6744 x 1.73 at -0.05859 degrees (North through East) ! Clean map min=-0.016828 max=3.3782 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101551Jy sigma=0.319219 ! Fit after self-cal, rms=0.095828Jy sigma=0.293557 ! Inverting map and beam ! Estimated beam: bmin=0.6737 mas, bmaj=1.731 mas, bpa=-0.1409 degrees ! Estimated noise=3.32431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00874987 Jy ! Component: 100 - total flux cleaned = -0.00905745 Jy ! Component: 150 - total flux cleaned = -0.00881103 Jy ! Component: 200 - total flux cleaned = -0.00835352 Jy ! Total flux subtracted in 200 components = -0.00835352 Jy ! Clean residual min=-0.015510 max=0.016015 Jy/beam ! Clean residual mean=-0.000001 rms=0.003801 Jy/beam ! Combined flux in latest and established models = 5.27793 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 178 components and 5.27793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094355Jy sigma=0.286194 ! Fit after self-cal, rms=0.094252Jy sigma=0.286013 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000720855 Jy ! Component: 100 - total flux cleaned = -0.000708686 Jy ! Component: 150 - total flux cleaned = -0.000705615 Jy ! Component: 200 - total flux cleaned = -0.000356285 Jy ! Total flux subtracted in 200 components = -0.000356285 Jy ! Clean residual min=-0.015178 max=0.016034 Jy/beam ! Clean residual mean=-0.000001 rms=0.003749 Jy/beam ! Combined flux in latest and established models = 5.27757 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 189 components and 5.27757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093579Jy sigma=0.282697 ! Fit after self-cal, rms=0.093512Jy sigma=0.282641 ! Inverting map ! Added new window around map position (12, -10.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159642 Jy ! Component: 100 - total flux cleaned = 0.0258556 Jy ! Component: 150 - total flux cleaned = 0.0328991 Jy ! Component: 200 - total flux cleaned = 0.0373306 Jy ! Total flux subtracted in 200 components = 0.0373306 Jy ! Clean residual min=-0.013200 max=0.012830 Jy/beam ! Clean residual mean=0.000003 rms=0.003232 Jy/beam ! Combined flux in latest and established models = 5.3149 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 208 components and 5.3149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089172Jy sigma=0.271694 ! Fit after self-cal, rms=0.088775Jy sigma=0.271019 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088775Jy sigma=0.271019 ! Fit after self-cal, rms=0.087977Jy sigma=0.269881 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5686 mas, bmaj=1.543 mas, bpa=-0.3868 degrees ! Estimated noise=4.22537 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.45973 Jy ! Component: 100 - total flux cleaned = 3.27239 Jy ! Component: 150 - total flux cleaned = 3.77162 Jy ! Component: 200 - total flux cleaned = 4.11257 Jy ! Total flux subtracted in 200 components = 4.11257 Jy ! Clean residual min=-0.103964 max=0.189157 Jy/beam ! Clean residual mean=-0.000022 rms=0.025729 Jy/beam ! Combined flux in latest and established models = 4.11256 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 4.11256 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6739 mas, bmaj=1.731 mas, bpa=-0.1274 degrees ! Estimated noise=3.32377 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.333956 Jy ! Component: 100 - total flux cleaned = 0.52409 Jy ! Component: 150 - total flux cleaned = 0.640135 Jy ! Component: 200 - total flux cleaned = 0.716287 Jy ! Total flux subtracted in 200 components = 0.716287 Jy ! Clean residual min=-0.034695 max=0.050395 Jy/beam ! Clean residual mean=-0.000037 rms=0.010564 Jy/beam ! Combined flux in latest and established models = 4.82885 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 35 components and 4.82885 Jy ! Inverting map ! Added new window around map position (-15.8, 30.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0568806 Jy ! Component: 100 - total flux cleaned = 0.100258 Jy ! Component: 150 - total flux cleaned = 0.136112 Jy ! Component: 200 - total flux cleaned = 0.167171 Jy ! Total flux subtracted in 200 components = 0.167171 Jy ! Clean residual min=-0.027647 max=0.027217 Jy/beam ! Clean residual mean=-0.000026 rms=0.007197 Jy/beam ! Combined flux in latest and established models = 4.99602 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 61 components and 4.99602 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.831 mas, bmaj=3.616 mas, bpa=9.841 degrees ! Estimated noise=6.06899 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0592345 Jy ! Component: 100 - total flux cleaned = 0.102693 Jy ! Component: 150 - total flux cleaned = 0.138989 Jy ! Component: 200 - total flux cleaned = 0.170048 Jy ! Total flux subtracted in 200 components = 0.170048 Jy ! Clean residual min=-0.036524 max=0.033663 Jy/beam ! Clean residual mean=-0.000046 rms=0.011399 Jy/beam ! Combined flux in latest and established models = 5.16607 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0267976 Jy ! Component: 100 - total flux cleaned = 0.0500338 Jy ! Component: 150 - total flux cleaned = 0.0702773 Jy ! Component: 200 - total flux cleaned = 0.0880244 Jy ! Total flux subtracted in 200 components = 0.0880244 Jy ! Clean residual min=-0.029932 max=0.027071 Jy/beam ! Clean residual mean=-0.000028 rms=0.008518 Jy/beam ! Combined flux in latest and established models = 5.2541 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 147 components and 5.2541 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6739 mas, bmaj=1.731 mas, bpa=-0.1274 degrees ! Estimated noise=3.32377 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00856385 Jy ! Component: 100 - total flux cleaned = 0.0185961 Jy ! Component: 150 - total flux cleaned = 0.026839 Jy ! Component: 200 - total flux cleaned = 0.0325559 Jy ! Total flux subtracted in 200 components = 0.0325559 Jy ! Clean residual min=-0.020976 max=0.021763 Jy/beam ! Clean residual mean=-0.000004 rms=0.004351 Jy/beam ! Combined flux in latest and established models = 5.28665 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 175 components and 5.28665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095603Jy sigma=0.334630 ! Fit after self-cal, rms=0.094558Jy sigma=0.321458 wmodel J1733-1304_X_c_map.mod ! Writing 175 model components to file: J1733-1304_X_c_map.mod wobs J1733-1304_X_c_uvs.fits ! Writing UV FITS file: J1733-1304_X_c_uvs.fits wwins J1733-1304_X_c_map.win ! wwins: Wrote 8 windows to J1733-1304_X_c_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00257137 Jy ! Component: 100 - total flux cleaned = -0.00521474 Jy ! Component: 150 - total flux cleaned = -0.00640009 Jy ! Component: 200 - total flux cleaned = -0.00809353 Jy ! Component: 250 - total flux cleaned = -0.00782497 Jy ! Component: 300 - total flux cleaned = -0.0078112 Jy ! Component: 350 - total flux cleaned = -0.00756607 Jy ! Component: 400 - total flux cleaned = -0.00778707 Jy ! Component: 450 - total flux cleaned = -0.0084374 Jy ! Component: 500 - total flux cleaned = -0.00864032 Jy ! Component: 550 - total flux cleaned = -0.00944573 Jy ! Component: 600 - total flux cleaned = -0.0106108 Jy ! Component: 650 - total flux cleaned = -0.0107987 Jy ! Component: 700 - total flux cleaned = -0.0113449 Jy ! Component: 750 - total flux cleaned = -0.0116984 Jy ! Component: 800 - total flux cleaned = -0.0122143 Jy ! Component: 850 - total flux cleaned = -0.0128684 Jy ! Component: 900 - total flux cleaned = -0.0133408 Jy ! Component: 950 - total flux cleaned = -0.0136538 Jy ! Component: 1000 - total flux cleaned = -0.0144128 Jy ! Component: 1050 - total flux cleaned = -0.0155832 Jy ! Component: 1100 - total flux cleaned = -0.0161525 Jy ! Component: 1150 - total flux cleaned = -0.0169802 Jy ! Component: 1200 - total flux cleaned = -0.0172446 Jy ! Component: 1250 - total flux cleaned = -0.0180311 Jy ! Component: 1300 - total flux cleaned = -0.0190502 Jy ! Component: 1350 - total flux cleaned = -0.0194212 Jy ! Component: 1400 - total flux cleaned = -0.019786 Jy ! Component: 1450 - total flux cleaned = -0.0202623 Jy ! Component: 1500 - total flux cleaned = -0.0207256 Jy ! Component: 1550 - total flux cleaned = -0.0211763 Jy ! Component: 1600 - total flux cleaned = -0.0210638 Jy ! Component: 1650 - total flux cleaned = -0.0217103 Jy ! Component: 1700 - total flux cleaned = -0.0214991 Jy ! Component: 1750 - total flux cleaned = -0.0221194 Jy ! Component: 1800 - total flux cleaned = -0.021815 Jy ! Component: 1850 - total flux cleaned = -0.0220127 Jy ! Component: 1900 - total flux cleaned = -0.0222064 Jy ! Component: 1950 - total flux cleaned = -0.0225867 Jy ! Component: 2000 - total flux cleaned = -0.0224913 Jy ! Component: 2050 - total flux cleaned = -0.0225829 Jy ! Component: 2100 - total flux cleaned = -0.0224935 Jy ! Component: 2150 - total flux cleaned = -0.0226719 Jy ! Component: 2200 - total flux cleaned = -0.0227564 Jy ! Component: 2250 - total flux cleaned = -0.0225864 Jy ! Component: 2300 - total flux cleaned = -0.0228359 Jy ! Component: 2350 - total flux cleaned = -0.0226712 Jy ! Component: 2400 - total flux cleaned = -0.022432 Jy ! Component: 2450 - total flux cleaned = -0.0224333 Jy ! Component: 2500 - total flux cleaned = -0.0225877 Jy ! Component: 2550 - total flux cleaned = -0.0223563 Jy ! Component: 2600 - total flux cleaned = -0.0220567 Jy ! Component: 2650 - total flux cleaned = -0.022205 Jy ! Component: 2700 - total flux cleaned = -0.0223501 Jy ! Component: 2750 - total flux cleaned = -0.0222068 Jy ! Component: 2800 - total flux cleaned = -0.0225591 Jy ! Component: 2850 - total flux cleaned = -0.0224895 Jy ! Component: 2900 - total flux cleaned = -0.0225568 Jy ! Component: 2950 - total flux cleaned = -0.022692 Jy ! Component: 3000 - total flux cleaned = -0.0231559 Jy ! Component: 3050 - total flux cleaned = -0.0232203 Jy ! Component: 3100 - total flux cleaned = -0.0236059 Jy ! Component: 3150 - total flux cleaned = -0.023796 Jy ! Component: 3200 - total flux cleaned = -0.023858 Jy ! Component: 3250 - total flux cleaned = -0.024289 Jy ! Component: 3300 - total flux cleaned = -0.0242276 Jy ! Component: 3350 - total flux cleaned = -0.0246495 Jy ! Component: 3400 - total flux cleaned = -0.0249466 Jy ! Component: 3450 - total flux cleaned = -0.0250051 Jy ! Component: 3500 - total flux cleaned = -0.0252945 Jy ! Component: 3550 - total flux cleaned = -0.0254078 Jy ! Component: 3600 - total flux cleaned = -0.0254638 Jy ! Component: 3650 - total flux cleaned = -0.0256862 Jy ! Component: 3700 - total flux cleaned = -0.0259618 Jy ! Component: 3750 - total flux cleaned = -0.0262883 Jy ! Component: 3800 - total flux cleaned = -0.0264492 Jy ! Component: 3850 - total flux cleaned = -0.0267675 Jy ! Component: 3900 - total flux cleaned = -0.0269778 Jy ! Component: 3950 - total flux cleaned = -0.0271849 Jy ! Component: 4000 - total flux cleaned = -0.0274413 Jy ! Component: 4050 - total flux cleaned = -0.0277455 Jy ! Total flux subtracted in 4096 components = -0.0280456 Jy ! Clean residual min=-0.002975 max=0.002737 Jy/beam ! Clean residual mean=-0.000001 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 5.25861 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 483 components and 5.25861 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1733-1304_X_c_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6739 x 1.731 at -0.1274 degrees (North through East) ! Clean map min=-0.007388 max=3.3681 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1733-1304_X_c_map.fits wmodel /image_prod/ug002_uva//J1733-1304_X_c_map.mod ! Writing 483 model components to file: /image_prod/ug002_uva//J1733-1304_X_c_map.mod wobs /image_prod/ug002_uva//J1733-1304_X_c_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1733-1304_X_c_uvs.fits wwins /image_prod/ug002_uva//J1733-1304_X_c_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J1733-1304_X_c_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 3.36813 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000867164 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0772384 0.0772384 0.154477 0.308954 0.617908 1.23582 2.47163 4.94326 9.88652 19.773 39.5461 79.0922 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak= ", int(1000*peak_flux)/1000 ! peak= 3.368 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3884.08 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1733-1304_X_c_dfm.log closed on Thu Mar 5 03:17:41 2020