! Started logfile: /image_prod/ug002_uva//J1725+1152_S_dfm.log on Thu Mar 5 03:14:47 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1725+1152_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1725+1152_S_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.914352 visibilities/baseline/integration-bin. ! Found source: J1725+1152 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5925 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1725+1152_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004876Jy sigma=8.774511 ! Fit after self-cal, rms=0.918117Jy sigma=8.032206 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.831 mas, bmaj=6.801 mas, bpa=-8.574 degrees ! Estimated noise=1.51908 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0638236 Jy ! Component: 100 - total flux cleaned = 0.0777413 Jy ! Total flux subtracted in 100 components = 0.0777413 Jy ! Clean residual min=-0.003147 max=0.003883 Jy/beam ! Clean residual mean=0.000008 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.0777413 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.0777413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059776Jy sigma=0.432413 ! Fit after self-cal, rms=0.059563Jy sigma=0.431021 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=7.67 mas, bpa=-9.04 degrees ! Estimated noise=1.0958 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256502 Jy ! Component: 100 - total flux cleaned = 0.00217524 Jy ! Component: 150 - total flux cleaned = 0.00192505 Jy ! Component: 200 - total flux cleaned = 0.00182149 Jy ! Total flux subtracted in 200 components = 0.00182149 Jy ! Clean residual min=-0.002527 max=0.003299 Jy/beam ! Clean residual mean=0.000009 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0795628 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0795628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059139Jy sigma=0.429654 ! Fit after self-cal, rms=0.059122Jy sigma=0.429635 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.351 x 7.67 at -9.04 degrees (North through East) ! Clean map min=-0.0024817 max=0.082771 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.00 KP 0.95 ! LA 1.01 MK 0.95 NL 0.99 PT 0.99 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.02 HN 0.99 KP 0.98 ! LA 0.96 MK 0.96 NL 1.02 PT 1.04 ! SC 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.04 HN 0.98 KP 0.99 ! LA 0.97 MK 1.03 NL 1.17 PT 1.04 ! SC 1.08 ! ! ! Fit before self-cal, rms=0.059122Jy sigma=0.429635 ! Fit after self-cal, rms=0.056532Jy sigma=0.426415 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.34 mas, bmaj=7.606 mas, bpa=-8.952 degrees ! Estimated noise=1.09024 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000490221 Jy ! Component: 100 - total flux cleaned = 0.000680536 Jy ! Component: 150 - total flux cleaned = 0.000809186 Jy ! Component: 200 - total flux cleaned = 0.000880763 Jy ! Total flux subtracted in 200 components = 0.000880763 Jy ! Clean residual min=-0.001981 max=0.002495 Jy/beam ! Clean residual mean=0.000008 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0804435 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 19 components and 0.0804435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056494Jy sigma=0.426266 ! Fit after self-cal, rms=0.056465Jy sigma=0.426187 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.056465Jy sigma=0.426187 ! Fit after self-cal, rms=0.054722Jy sigma=0.421785 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=7.599 mas, bpa=-9.114 degrees ! Estimated noise=1.08981 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167208 Jy ! Component: 100 - total flux cleaned = 0.000180951 Jy ! Component: 150 - total flux cleaned = 0.000216905 Jy ! Component: 200 - total flux cleaned = 0.000238072 Jy ! Total flux subtracted in 200 components = 0.000238072 Jy ! Clean residual min=-0.001870 max=0.001811 Jy/beam ! Clean residual mean=-0.000009 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0806816 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.0806816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054715Jy sigma=0.421734 ! Fit after self-cal, rms=0.054709Jy sigma=0.421654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.15927e-05 Jy ! Component: 100 - total flux cleaned = -1.22325e-05 Jy ! Component: 150 - total flux cleaned = -2.10115e-05 Jy ! Component: 200 - total flux cleaned = -1.28185e-05 Jy ! Total flux subtracted in 200 components = -1.28185e-05 Jy ! Clean residual min=-0.001863 max=0.001788 Jy/beam ! Clean residual mean=-0.000009 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0806688 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.0806688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054706Jy sigma=0.421628 ! Fit after self-cal, rms=0.054704Jy sigma=0.421625 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054704Jy sigma=0.421625 ! Fit after self-cal, rms=0.054735Jy sigma=0.421563 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=7.595 mas, bpa=-9.137 degrees ! Estimated noise=1.09121 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144348 Jy ! Component: 100 - total flux cleaned = 0.000172592 Jy ! Component: 150 - total flux cleaned = 0.000172701 Jy ! Component: 200 - total flux cleaned = 0.000180866 Jy ! Total flux subtracted in 200 components = 0.000180866 Jy ! Clean residual min=-0.001836 max=0.001795 Jy/beam ! Clean residual mean=-0.000012 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0808496 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.0808496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054732Jy sigma=0.421537 ! Fit after self-cal, rms=0.054731Jy sigma=0.421534 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.02522e-05 Jy ! Component: 100 - total flux cleaned = -1.04901e-05 Jy ! Component: 150 - total flux cleaned = -1.04601e-05 Jy ! Component: 200 - total flux cleaned = -3.67355e-06 Jy ! Total flux subtracted in 200 components = -3.67355e-06 Jy ! Clean residual min=-0.001829 max=0.001783 Jy/beam ! Clean residual mean=-0.000011 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.080846 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 39 components and 0.0808459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054729Jy sigma=0.421519 ! Fit after self-cal, rms=0.054728Jy sigma=0.421518 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054728Jy sigma=0.421518 ! Fit after self-cal, rms=0.054748Jy sigma=0.421513 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.9 mas, bmaj=11.11 mas, bpa=-12.91 degrees ! Estimated noise=1.33525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195493 Jy ! Component: 100 - total flux cleaned = 0.000247346 Jy ! Component: 150 - total flux cleaned = 0.000289539 Jy ! Component: 200 - total flux cleaned = 0.000317722 Jy ! Total flux subtracted in 200 components = 0.000317722 Jy ! Clean residual min=-0.002494 max=0.002338 Jy/beam ! Clean residual mean=-0.000026 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.0811637 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.0811637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054749Jy sigma=0.421507 ! Fit after self-cal, rms=0.054748Jy sigma=0.421504 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.33421e-05 Jy ! Component: 100 - total flux cleaned = 3.99734e-05 Jy ! Component: 150 - total flux cleaned = 4.58709e-05 Jy ! Component: 200 - total flux cleaned = 4.61031e-05 Jy ! Total flux subtracted in 200 components = 4.61031e-05 Jy ! Clean residual min=-0.002503 max=0.002341 Jy/beam ! Clean residual mean=-0.000026 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.0812098 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.0812098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054749Jy sigma=0.421512 ! Fit after self-cal, rms=0.054748Jy sigma=0.421510 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=7.591 mas, bpa=-9.133 degrees ! Estimated noise=1.09293 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.336 x 7.591 at -9.133 degrees (North through East) ! Clean map min=-0.0018078 max=0.082329 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.822 mas, bmaj=6.757 mas, bpa=-8.804 degrees ! Estimated noise=1.51175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0635505 Jy ! Component: 100 - total flux cleaned = 0.0774087 Jy ! Component: 150 - total flux cleaned = 0.0792677 Jy ! Component: 200 - total flux cleaned = 0.0797132 Jy ! Total flux subtracted in 200 components = 0.0797132 Jy ! Clean residual min=-0.002771 max=0.002288 Jy/beam ! Clean residual mean=-0.000005 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0797132 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0797132 Jy ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=7.591 mas, bpa=-9.133 degrees ! Estimated noise=1.09293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124574 Jy ! Component: 100 - total flux cleaned = 0.00135103 Jy ! Component: 150 - total flux cleaned = 0.00146371 Jy ! Component: 200 - total flux cleaned = 0.00148688 Jy ! Total flux subtracted in 200 components = 0.00148688 Jy ! Clean residual min=-0.001912 max=0.001811 Jy/beam ! Clean residual mean=-0.000012 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0812 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 0.0812 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.9 mas, bmaj=11.11 mas, bpa=-12.91 degrees ! Estimated noise=1.33525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.7733e-05 Jy ! Component: 100 - total flux cleaned = 0.000106198 Jy ! Component: 150 - total flux cleaned = 0.000118065 Jy ! Component: 200 - total flux cleaned = 0.00011834 Jy ! Total flux subtracted in 200 components = 0.00011834 Jy ! Clean residual min=-0.002522 max=0.002266 Jy/beam ! Clean residual mean=-0.000026 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0813184 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.00042e-05 Jy ! Component: 100 - total flux cleaned = 1.85062e-05 Jy ! Component: 150 - total flux cleaned = 1.79902e-05 Jy ! Component: 200 - total flux cleaned = 9.76562e-06 Jy ! Total flux subtracted in 200 components = 9.76562e-06 Jy ! Clean residual min=-0.002514 max=0.002284 Jy/beam ! Clean residual mean=-0.000026 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0813282 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.0813282 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=7.591 mas, bpa=-9.133 degrees ! Estimated noise=1.09293 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105824 Jy ! Component: 100 - total flux cleaned = 2.14262e-05 Jy ! Component: 150 - total flux cleaned = -2.50029e-06 Jy ! Component: 200 - total flux cleaned = -1.3238e-05 Jy ! Total flux subtracted in 200 components = -1.3238e-05 Jy ! Clean residual min=-0.001889 max=0.001840 Jy/beam ! Clean residual mean=-0.000011 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0813149 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.0813149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054755Jy sigma=0.421548 ! Fit after self-cal, rms=0.054753Jy sigma=0.421541 wmodel J1725+1152_S_map.mod ! Writing 42 model components to file: J1725+1152_S_map.mod wobs J1725+1152_S_uvs.fits ! Writing UV FITS file: J1725+1152_S_uvs.fits wwins J1725+1152_S_map.win ! wwins: Wrote 1 windows to J1725+1152_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.95796e-05 Jy ! Component: 100 - total flux cleaned = 0.000213536 Jy ! Component: 150 - total flux cleaned = 0.000414443 Jy ! Component: 200 - total flux cleaned = 0.000578555 Jy ! Component: 250 - total flux cleaned = 0.00073556 Jy ! Component: 300 - total flux cleaned = 0.000836414 Jy ! Component: 350 - total flux cleaned = 0.000958572 Jy ! Component: 400 - total flux cleaned = 0.00107666 Jy ! Component: 450 - total flux cleaned = 0.00121408 Jy ! Component: 500 - total flux cleaned = 0.00134659 Jy ! Component: 550 - total flux cleaned = 0.00145362 Jy ! Component: 600 - total flux cleaned = 0.00162145 Jy ! Component: 650 - total flux cleaned = 0.00172361 Jy ! Component: 700 - total flux cleaned = 0.00184373 Jy ! Component: 750 - total flux cleaned = 0.00196067 Jy ! Component: 800 - total flux cleaned = 0.00199871 Jy ! Component: 850 - total flux cleaned = 0.0021113 Jy ! Component: 900 - total flux cleaned = 0.00212983 Jy ! Component: 950 - total flux cleaned = 0.00220232 Jy ! Component: 1000 - total flux cleaned = 0.00227365 Jy ! Component: 1050 - total flux cleaned = 0.00230907 Jy ! Component: 1100 - total flux cleaned = 0.00241332 Jy ! Component: 1150 - total flux cleaned = 0.00241331 Jy ! Component: 1200 - total flux cleaned = 0.00249817 Jy ! Component: 1250 - total flux cleaned = 0.00258148 Jy ! Component: 1300 - total flux cleaned = 0.00264691 Jy ! Component: 1350 - total flux cleaned = 0.0026956 Jy ! Component: 1400 - total flux cleaned = 0.00269531 Jy ! Component: 1450 - total flux cleaned = 0.00274309 Jy ! Component: 1500 - total flux cleaned = 0.00277431 Jy ! Component: 1550 - total flux cleaned = 0.00278971 Jy ! Component: 1600 - total flux cleaned = 0.00280501 Jy ! Component: 1650 - total flux cleaned = 0.00285025 Jy ! Component: 1700 - total flux cleaned = 0.00285005 Jy ! Component: 1750 - total flux cleaned = 0.00287937 Jy ! Component: 1800 - total flux cleaned = 0.00287934 Jy ! Component: 1850 - total flux cleaned = 0.0028938 Jy ! Component: 1900 - total flux cleaned = 0.00296535 Jy ! Component: 1950 - total flux cleaned = 0.00295104 Jy ! Component: 2000 - total flux cleaned = 0.00296505 Jy ! Component: 2050 - total flux cleaned = 0.00296509 Jy ! Component: 2100 - total flux cleaned = 0.00295149 Jy ! Component: 2150 - total flux cleaned = 0.00299226 Jy ! Component: 2200 - total flux cleaned = 0.0030056 Jy ! Component: 2250 - total flux cleaned = 0.00303199 Jy ! Component: 2300 - total flux cleaned = 0.00304513 Jy ! Component: 2350 - total flux cleaned = 0.00305792 Jy ! Component: 2400 - total flux cleaned = 0.00303206 Jy ! Component: 2450 - total flux cleaned = 0.00304476 Jy ! Component: 2500 - total flux cleaned = 0.00305737 Jy ! Component: 2550 - total flux cleaned = 0.00307011 Jy ! Component: 2600 - total flux cleaned = 0.00313227 Jy ! Component: 2650 - total flux cleaned = 0.00321827 Jy ! Component: 2700 - total flux cleaned = 0.00321815 Jy ! Component: 2750 - total flux cleaned = 0.00324242 Jy ! Component: 2800 - total flux cleaned = 0.00332651 Jy ! Component: 2850 - total flux cleaned = 0.00338594 Jy ! Component: 2900 - total flux cleaned = 0.00342126 Jy ! Component: 2950 - total flux cleaned = 0.00344461 Jy ! Component: 3000 - total flux cleaned = 0.00352611 Jy ! Component: 3050 - total flux cleaned = 0.00354921 Jy ! Component: 3100 - total flux cleaned = 0.00361808 Jy ! Component: 3150 - total flux cleaned = 0.00366369 Jy ! Component: 3200 - total flux cleaned = 0.00373154 Jy ! Component: 3250 - total flux cleaned = 0.00375384 Jy ! Component: 3300 - total flux cleaned = 0.00378724 Jy ! Component: 3350 - total flux cleaned = 0.0038093 Jy ! Component: 3400 - total flux cleaned = 0.00380936 Jy ! Component: 3450 - total flux cleaned = 0.0038749 Jy ! Component: 3500 - total flux cleaned = 0.00388575 Jy ! Component: 3550 - total flux cleaned = 0.00390727 Jy ! Component: 3600 - total flux cleaned = 0.00390732 Jy ! Component: 3650 - total flux cleaned = 0.00394985 Jy ! Component: 3700 - total flux cleaned = 0.00394987 Jy ! Component: 3750 - total flux cleaned = 0.00398134 Jy ! Component: 3800 - total flux cleaned = 0.00399172 Jy ! Component: 3850 - total flux cleaned = 0.00399184 Jy ! Component: 3900 - total flux cleaned = 0.00404347 Jy ! Component: 3950 - total flux cleaned = 0.00410492 Jy ! Component: 4000 - total flux cleaned = 0.00416587 Jy ! Component: 4050 - total flux cleaned = 0.0041961 Jy ! Total flux subtracted in 4096 components = 0.00418606 Jy ! Clean residual min=-0.000656 max=0.000564 Jy/beam ! Clean residual mean=0.000002 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.085501 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 317 components and 0.0855011 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1725+1152_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.336 x 7.591 at -9.133 degrees (North through East) ! Clean map min=-0.0010357 max=0.082034 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1725+1152_S_map.fits wmodel /image_prod/ug002_uva//J1725+1152_S_map.mod ! Writing 317 model components to file: /image_prod/ug002_uva//J1725+1152_S_map.mod wobs /image_prod/ug002_uva//J1725+1152_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1725+1152_S_uvs.fits wwins /image_prod/ug002_uva//J1725+1152_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1725+1152_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0820337 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000179266 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.655583 0.655583 1.31117 2.62233 5.24466 10.4893 20.9786 41.9573 83.9146 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.082 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 457.608 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1725+1152_S_dfm.log closed on Thu Mar 5 03:14:51 2020