! Started logfile: /image_prod/ug002_uva//J1722-0503_X_dfm.log on Thu Mar 5 03:13:41 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1722-0503_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1722-0503_X_uva.fits ! AN table 1: 60 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.967857 visibilities/baseline/integration-bin. ! Found source: J1722-0503 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 19512 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1722-0503_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.022495Jy sigma=8.638629 ! Fit after self-cal, rms=0.810933Jy sigma=6.855484 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.618 mas, bmaj=1.635 mas, bpa=-2.984 degrees ! Estimated noise=1.03369 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.136295 Jy ! Component: 100 - total flux cleaned = 0.182025 Jy ! Total flux subtracted in 100 components = 0.182025 Jy ! Clean residual min=-0.010963 max=0.020172 Jy/beam ! Clean residual mean=-0.000014 rms=0.002697 Jy/beam ! Combined flux in latest and established models = 0.182025 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.182025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085548Jy sigma=0.708109 ! Fit after self-cal, rms=0.085285Jy sigma=0.705210 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223827 Jy ! Component: 100 - total flux cleaned = 0.0339027 Jy ! Total flux subtracted in 100 components = 0.0339027 Jy ! Clean residual min=-0.010382 max=0.015459 Jy/beam ! Clean residual mean=-0.000012 rms=0.002268 Jy/beam ! Combined flux in latest and established models = 0.215927 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 9 components and 0.215927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076765Jy sigma=0.629308 ! Fit after self-cal, rms=0.076767Jy sigma=0.628924 ! Inverting map ! Added new window around map position (2, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114597 Jy ! Component: 100 - total flux cleaned = 0.0151798 Jy ! Total flux subtracted in 100 components = 0.0151798 Jy ! Clean residual min=-0.010516 max=0.010513 Jy/beam ! Clean residual mean=-0.000011 rms=0.002113 Jy/beam ! Combined flux in latest and established models = 0.231107 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 16 components and 0.231107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073861Jy sigma=0.603681 ! Fit after self-cal, rms=0.073689Jy sigma=0.602299 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7703 mas, bmaj=1.817 mas, bpa=-2.309 degrees ! Estimated noise=0.613431 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011172 Jy ! Component: 100 - total flux cleaned = 0.018059 Jy ! Component: 150 - total flux cleaned = 0.0227528 Jy ! Component: 200 - total flux cleaned = 0.0249845 Jy ! Total flux subtracted in 200 components = 0.0249845 Jy ! Clean residual min=-0.010556 max=0.012039 Jy/beam ! Clean residual mean=-0.000016 rms=0.002474 Jy/beam ! Combined flux in latest and established models = 0.256092 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.256092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071851Jy sigma=0.585604 ! Fit after self-cal, rms=0.071757Jy sigma=0.584796 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7703 x 1.817 at -2.309 degrees (North through East) ! Clean map min=-0.0099631 max=0.18907 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 1.03 KP 1.10 ! MK 1.03 NL 1.05 OV 0.87 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.02 KP 1.09 ! MK 1.02 NL 1.10 OV 0.84 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 1.02 KP 1.08 ! MK 1.07 NL 1.04 OV 0.84 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.98 KP 1.07 ! MK 1.03 NL 1.04 OV 0.87 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.02 KP 1.08 ! MK 1.02 NL 1.07 OV 0.88 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.05 KP 1.10 ! MK 1.01 NL 1.10 OV 0.86 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.01 KP 1.10 ! MK 1.02 NL 1.06 OV 0.86 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 1.06 KP 1.08 ! MK 0.99 NL 1.03 OV 0.88 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.02 KP 1.10 ! MK 1.02 NL 1.09 OV 0.86 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.03 KP 1.12 ! MK 1.00 NL 1.03 OV 0.85 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.07 KP 1.08 ! MK 1.00 NL 1.11 OV 0.86 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 1.04 KP 1.07 ! MK 1.02 NL 1.05 OV 0.86 SC 1.02 ! ! ! Fit before self-cal, rms=0.071757Jy sigma=0.584796 ! Fit after self-cal, rms=0.070099Jy sigma=0.558801 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7752 mas, bmaj=1.825 mas, bpa=-1.907 degrees ! Estimated noise=0.614026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00200002 Jy ! Component: 100 - total flux cleaned = -0.00153188 Jy ! Component: 150 - total flux cleaned = -0.001413 Jy ! Component: 200 - total flux cleaned = -0.00152046 Jy ! Total flux subtracted in 200 components = -0.00152046 Jy ! Clean residual min=-0.007857 max=0.008593 Jy/beam ! Clean residual mean=-0.000007 rms=0.002128 Jy/beam ! Combined flux in latest and established models = 0.254571 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.254571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069958Jy sigma=0.557256 ! Fit after self-cal, rms=0.070000Jy sigma=0.556969 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070000Jy sigma=0.556969 ! Fit after self-cal, rms=0.070512Jy sigma=0.484791 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7937 mas, bmaj=1.833 mas, bpa=-0.9459 degrees ! Estimated noise=0.628438 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173892 Jy ! Component: 100 - total flux cleaned = 0.001649 Jy ! Component: 150 - total flux cleaned = 0.00164706 Jy ! Component: 200 - total flux cleaned = 0.00150682 Jy ! Total flux subtracted in 200 components = 0.00150682 Jy ! Clean residual min=-0.003440 max=0.005828 Jy/beam ! Clean residual mean=-0.000006 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.256078 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.256078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070263Jy sigma=0.482709 ! Fit after self-cal, rms=0.070360Jy sigma=0.482384 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00503266 Jy ! Component: 100 - total flux cleaned = 0.00564692 Jy ! Component: 150 - total flux cleaned = 0.00565255 Jy ! Component: 200 - total flux cleaned = 0.0055909 Jy ! Total flux subtracted in 200 components = 0.0055909 Jy ! Clean residual min=-0.003051 max=0.004042 Jy/beam ! Clean residual mean=-0.000005 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.261669 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.261669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069930Jy sigma=0.478957 ! Fit after self-cal, rms=0.069877Jy sigma=0.478541 ! Inverting map ! Added new window around map position (3, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236944 Jy ! Component: 100 - total flux cleaned = 0.00369815 Jy ! Component: 150 - total flux cleaned = 0.00443321 Jy ! Component: 200 - total flux cleaned = 0.00449968 Jy ! Total flux subtracted in 200 components = 0.00449968 Jy ! Clean residual min=-0.002730 max=0.002681 Jy/beam ! Clean residual mean=-0.000005 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.266168 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.266169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069598Jy sigma=0.476199 ! Fit after self-cal, rms=0.069567Jy sigma=0.476013 ! Inverting map ! Added new window around map position (-9.8, 43.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179004 Jy ! Component: 100 - total flux cleaned = 0.00242512 Jy ! Component: 150 - total flux cleaned = 0.0029259 Jy ! Component: 200 - total flux cleaned = 0.0033193 Jy ! Total flux subtracted in 200 components = 0.0033193 Jy ! Clean residual min=-0.002435 max=0.002550 Jy/beam ! Clean residual mean=-0.000004 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.269488 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 79 components and 0.269488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069409Jy sigma=0.474890 ! Fit after self-cal, rms=0.069398Jy sigma=0.474789 ! Inverting map ! Added new window around map position (-7, 19.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144239 Jy ! Component: 100 - total flux cleaned = 0.00174451 Jy ! Component: 150 - total flux cleaned = 0.00228757 Jy ! Component: 200 - total flux cleaned = 0.00263669 Jy ! Total flux subtracted in 200 components = 0.00263669 Jy ! Clean residual min=-0.002183 max=0.002184 Jy/beam ! Clean residual mean=-0.000004 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.272124 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 97 components and 0.272124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069269Jy sigma=0.473806 ! Fit after self-cal, rms=0.069265Jy sigma=0.473756 ! Inverting map ! Added new window around map position (18, -34.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196669 Jy ! Component: 100 - total flux cleaned = 0.00218032 Jy ! Component: 150 - total flux cleaned = 0.00255506 Jy ! Component: 200 - total flux cleaned = 0.00281611 Jy ! Total flux subtracted in 200 components = 0.00281611 Jy ! Clean residual min=-0.002045 max=0.002288 Jy/beam ! Clean residual mean=-0.000004 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.274941 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 114 components and 0.274941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069172Jy sigma=0.473030 ! Fit after self-cal, rms=0.069167Jy sigma=0.472993 ! Inverting map ! Added new window around map position (4.8, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000279484 Jy ! Component: 100 - total flux cleaned = 0.000208185 Jy ! Component: 150 - total flux cleaned = 0.00045504 Jy ! Component: 200 - total flux cleaned = 0.000680502 Jy ! Total flux subtracted in 200 components = 0.000680502 Jy ! Clean residual min=-0.001799 max=0.001782 Jy/beam ! Clean residual mean=-0.000004 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.275621 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 133 components and 0.275621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069052Jy sigma=0.472166 ! Fit after self-cal, rms=0.069042Jy sigma=0.472121 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069042Jy sigma=0.472121 ! Fit after self-cal, rms=0.070260Jy sigma=0.470248 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7945 mas, bmaj=1.832 mas, bpa=-0.7142 degrees ! Estimated noise=0.629009 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241327 Jy ! Component: 100 - total flux cleaned = 0.000468552 Jy ! Component: 150 - total flux cleaned = 0.000587807 Jy ! Component: 200 - total flux cleaned = 0.000587702 Jy ! Total flux subtracted in 200 components = 0.000587702 Jy ! Clean residual min=-0.001386 max=0.001211 Jy/beam ! Clean residual mean=-0.000002 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.276209 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 149 components and 0.276209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070199Jy sigma=0.469836 ! Fit after self-cal, rms=0.070212Jy sigma=0.469799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160968 Jy ! Component: 100 - total flux cleaned = 0.000226978 Jy ! Component: 150 - total flux cleaned = 0.000258478 Jy ! Component: 200 - total flux cleaned = 0.000258552 Jy ! Total flux subtracted in 200 components = 0.000258552 Jy ! Clean residual min=-0.001318 max=0.001183 Jy/beam ! Clean residual mean=-0.000002 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.276467 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 164 components and 0.276467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070176Jy sigma=0.469604 ! Fit after self-cal, rms=0.070175Jy sigma=0.469591 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070175Jy sigma=0.469591 ! Fit after self-cal, rms=0.070286Jy sigma=0.469535 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.85 mas, bmaj=2.917 mas, bpa=0.8908 degrees ! Estimated noise=0.811313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000205511 Jy ! Component: 100 - total flux cleaned = -0.00012696 Jy ! Component: 150 - total flux cleaned = -1.03408e-05 Jy ! Component: 200 - total flux cleaned = 7.14976e-05 Jy ! Total flux subtracted in 200 components = 7.14976e-05 Jy ! Clean residual min=-0.001476 max=0.001186 Jy/beam ! Clean residual mean=-0.000005 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.276539 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 178 components and 0.276539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070278Jy sigma=0.469456 ! Fit after self-cal, rms=0.070280Jy sigma=0.469449 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.3554e-05 Jy ! Component: 100 - total flux cleaned = 2.72804e-05 Jy ! Component: 150 - total flux cleaned = 0.000110155 Jy ! Component: 200 - total flux cleaned = 0.000187888 Jy ! Total flux subtracted in 200 components = 0.000187888 Jy ! Clean residual min=-0.001447 max=0.001192 Jy/beam ! Clean residual mean=-0.000005 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.276727 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 194 components and 0.276727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070274Jy sigma=0.469418 ! Fit after self-cal, rms=0.070275Jy sigma=0.469415 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7943 mas, bmaj=1.831 mas, bpa=-0.6729 degrees ! Estimated noise=0.628404 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7943 x 1.831 at -0.6729 degrees (North through East) ! Clean map min=-0.0032342 max=0.19222 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6366 mas, bmaj=1.634 mas, bpa=-1.528 degrees ! Estimated noise=1.0839 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.142325 Jy ! Component: 100 - total flux cleaned = 0.186389 Jy ! Component: 150 - total flux cleaned = 0.208208 Jy ! Component: 200 - total flux cleaned = 0.221792 Jy ! Total flux subtracted in 200 components = 0.221792 Jy ! Clean residual min=-0.005462 max=0.007489 Jy/beam ! Clean residual mean=-0.000005 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 0.221792 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.221792 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7943 mas, bmaj=1.831 mas, bpa=-0.6729 degrees ! Estimated noise=0.628404 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147832 Jy ! Component: 100 - total flux cleaned = 0.0239518 Jy ! Component: 150 - total flux cleaned = 0.030096 Jy ! Component: 200 - total flux cleaned = 0.0345266 Jy ! Total flux subtracted in 200 components = 0.0345266 Jy ! Clean residual min=-0.002298 max=0.002886 Jy/beam ! Clean residual mean=-0.000005 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.256319 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 30 components and 0.256319 Jy ! Inverting map ! Added new window around map position (-0.8, -16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00336484 Jy ! Component: 100 - total flux cleaned = 0.00522489 Jy ! Component: 150 - total flux cleaned = 0.00607484 Jy ! Component: 200 - total flux cleaned = 0.00700112 Jy ! Total flux subtracted in 200 components = 0.00700112 Jy ! Clean residual min=-0.001843 max=0.001859 Jy/beam ! Clean residual mean=-0.000003 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.26332 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 55 components and 0.26332 Jy ! Inverting map ! Added new window around map position (-0.8, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0007077 Jy ! Component: 100 - total flux cleaned = 0.00163132 Jy ! Component: 150 - total flux cleaned = 0.00228571 Jy ! Component: 200 - total flux cleaned = 0.00283745 Jy ! Total flux subtracted in 200 components = 0.00283745 Jy ! Clean residual min=-0.001664 max=0.001508 Jy/beam ! Clean residual mean=-0.000003 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.266157 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 72 components and 0.266157 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.85 mas, bmaj=2.917 mas, bpa=0.8908 degrees ! Estimated noise=0.811313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210726 Jy ! Component: 100 - total flux cleaned = 0.0034244 Jy ! Component: 150 - total flux cleaned = 0.00426799 Jy ! Component: 200 - total flux cleaned = 0.00496163 Jy ! Total flux subtracted in 200 components = 0.00496163 Jy ! Clean residual min=-0.001367 max=0.001530 Jy/beam ! Clean residual mean=-0.000006 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.271119 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000546039 Jy ! Component: 100 - total flux cleaned = 0.000857808 Jy ! Component: 150 - total flux cleaned = 0.00106235 Jy ! Component: 200 - total flux cleaned = 0.00130817 Jy ! Total flux subtracted in 200 components = 0.00130817 Jy ! Clean residual min=-0.001272 max=0.001473 Jy/beam ! Clean residual mean=-0.000005 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.272427 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 117 components and 0.272427 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7943 mas, bmaj=1.831 mas, bpa=-0.6729 degrees ! Estimated noise=0.628404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000538388 Jy ! Component: 100 - total flux cleaned = -0.000252139 Jy ! Component: 150 - total flux cleaned = 5.88289e-05 Jy ! Component: 200 - total flux cleaned = 0.000433009 Jy ! Total flux subtracted in 200 components = 0.000433009 Jy ! Clean residual min=-0.001315 max=0.001248 Jy/beam ! Clean residual mean=-0.000002 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.27286 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 143 components and 0.27286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070304Jy sigma=0.469782 ! Fit after self-cal, rms=0.070277Jy sigma=0.469622 wmodel J1722-0503_X_map.mod ! Writing 143 model components to file: J1722-0503_X_map.mod wobs J1722-0503_X_uvs.fits ! Writing UV FITS file: J1722-0503_X_uvs.fits wwins J1722-0503_X_map.win ! wwins: Wrote 10 windows to J1722-0503_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000364545 Jy ! Component: 100 - total flux cleaned = -0.000561171 Jy ! Component: 150 - total flux cleaned = -0.000687665 Jy ! Component: 200 - total flux cleaned = -0.000890617 Jy ! Component: 250 - total flux cleaned = -0.00104824 Jy ! Component: 300 - total flux cleaned = -0.00124058 Jy ! Component: 350 - total flux cleaned = -0.00142841 Jy ! Component: 400 - total flux cleaned = -0.0016125 Jy ! Component: 450 - total flux cleaned = -0.00181095 Jy ! Component: 500 - total flux cleaned = -0.00197044 Jy ! Component: 550 - total flux cleaned = -0.00216245 Jy ! Component: 600 - total flux cleaned = -0.00235097 Jy ! Component: 650 - total flux cleaned = -0.0024865 Jy ! Component: 700 - total flux cleaned = -0.00273675 Jy ! Component: 750 - total flux cleaned = -0.00293414 Jy ! Component: 800 - total flux cleaned = -0.00309654 Jy ! Component: 850 - total flux cleaned = -0.00333705 Jy ! Component: 900 - total flux cleaned = -0.00349537 Jy ! Component: 950 - total flux cleaned = -0.00362086 Jy ! Component: 1000 - total flux cleaned = -0.00382191 Jy ! Component: 1050 - total flux cleaned = -0.00391359 Jy ! Component: 1100 - total flux cleaned = -0.00409534 Jy ! Component: 1150 - total flux cleaned = -0.00418499 Jy ! Component: 1200 - total flux cleaned = -0.0043331 Jy ! Component: 1250 - total flux cleaned = -0.00445028 Jy ! Component: 1300 - total flux cleaned = -0.00452288 Jy ! Component: 1350 - total flux cleaned = -0.00462344 Jy ! Component: 1400 - total flux cleaned = -0.00477966 Jy ! Component: 1450 - total flux cleaned = -0.00479387 Jy ! Component: 1500 - total flux cleaned = -0.00491924 Jy ! Component: 1550 - total flux cleaned = -0.00494672 Jy ! Component: 1600 - total flux cleaned = -0.00500189 Jy ! Component: 1650 - total flux cleaned = -0.00511059 Jy ! Component: 1700 - total flux cleaned = -0.00521837 Jy ! Component: 1750 - total flux cleaned = -0.00520487 Jy ! Component: 1800 - total flux cleaned = -0.00527119 Jy ! Component: 1850 - total flux cleaned = -0.00525821 Jy ! Component: 1900 - total flux cleaned = -0.00537544 Jy ! Component: 1950 - total flux cleaned = -0.00542693 Jy ! Component: 2000 - total flux cleaned = -0.0054783 Jy ! Component: 2050 - total flux cleaned = -0.00552915 Jy ! Component: 2100 - total flux cleaned = -0.00559218 Jy ! Component: 2150 - total flux cleaned = -0.00556718 Jy ! Component: 2200 - total flux cleaned = -0.00566653 Jy ! Component: 2250 - total flux cleaned = -0.00564185 Jy ! Component: 2300 - total flux cleaned = -0.00573971 Jy ! Component: 2350 - total flux cleaned = -0.00578834 Jy ! Component: 2400 - total flux cleaned = -0.00578819 Jy ! Component: 2450 - total flux cleaned = -0.00580021 Jy ! Component: 2500 - total flux cleaned = -0.0058241 Jy ! Component: 2550 - total flux cleaned = -0.00583585 Jy ! Component: 2600 - total flux cleaned = -0.00591804 Jy ! Component: 2650 - total flux cleaned = -0.00597632 Jy ! Component: 2700 - total flux cleaned = -0.00602263 Jy ! Component: 2750 - total flux cleaned = -0.00603418 Jy ! Component: 2800 - total flux cleaned = -0.00611423 Jy ! Component: 2850 - total flux cleaned = -0.00615963 Jy ! Component: 2900 - total flux cleaned = -0.00622727 Jy ! Component: 2950 - total flux cleaned = -0.00624966 Jy ! Component: 3000 - total flux cleaned = -0.00623846 Jy ! Component: 3050 - total flux cleaned = -0.00627166 Jy ! Component: 3100 - total flux cleaned = -0.00627164 Jy ! Component: 3150 - total flux cleaned = -0.00631533 Jy ! Component: 3200 - total flux cleaned = -0.00635872 Jy ! Component: 3250 - total flux cleaned = -0.00640181 Jy ! Component: 3300 - total flux cleaned = -0.00639107 Jy ! Component: 3350 - total flux cleaned = -0.00644446 Jy ! Component: 3400 - total flux cleaned = -0.00649746 Jy ! Component: 3450 - total flux cleaned = -0.00651852 Jy ! Component: 3500 - total flux cleaned = -0.0065395 Jy ! Component: 3550 - total flux cleaned = -0.00657077 Jy ! Component: 3600 - total flux cleaned = -0.00653975 Jy ! Component: 3650 - total flux cleaned = -0.00660155 Jy ! Component: 3700 - total flux cleaned = -0.00666304 Jy ! Component: 3750 - total flux cleaned = -0.00664262 Jy ! Component: 3800 - total flux cleaned = -0.00664265 Jy ! Component: 3850 - total flux cleaned = -0.00671322 Jy ! Component: 3900 - total flux cleaned = -0.00672311 Jy ! Component: 3950 - total flux cleaned = -0.00674294 Jy ! Component: 4000 - total flux cleaned = -0.0067727 Jy ! Component: 4050 - total flux cleaned = -0.0067431 Jy ! Total flux subtracted in 4096 components = -0.00673333 Jy ! Clean residual min=-0.000623 max=0.000594 Jy/beam ! Clean residual mean=-0.000001 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.266127 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 450 components and 0.266127 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1722-0503_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7943 x 1.831 at -0.6729 degrees (North through East) ! Clean map min=-0.0015163 max=0.19305 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1722-0503_X_map.fits wmodel /image_prod/ug002_uva//J1722-0503_X_map.mod ! Writing 450 model components to file: /image_prod/ug002_uva//J1722-0503_X_map.mod wobs /image_prod/ug002_uva//J1722-0503_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1722-0503_X_uvs.fits wwins /image_prod/ug002_uva//J1722-0503_X_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J1722-0503_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.193054 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000166005 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.257967 0.257967 0.515933 1.03187 2.06373 4.12747 8.25493 16.5099 33.0197 66.0395 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.193 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1162.94 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1722-0503_X_dfm.log closed on Thu Mar 5 03:13:46 2020