! Started logfile: /image_prod/ug002_uva//J1721+3542_S_dfm.log on Thu Mar  5 03:12:15 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1721+3542_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1721+3542_S_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.824444 visibilities/baseline/integration-bin.
! Found source: J1721+3542
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6678 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1721+3542_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014514Jy  sigma=9.104999
! Fit after  self-cal, rms=0.858290Jy  sigma=7.634322
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.05 mas, bmaj=5.088 mas, bpa=-3.296 degrees
! Estimated noise=1.38597 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.111296 Jy
! Component: 100  -  total flux cleaned = 0.141476 Jy
! Total flux subtracted in 100 components = 0.141476 Jy
! Clean residual min=-0.008397 max=0.026497 Jy/beam
! Clean residual mean=0.000014 rms=0.002246 Jy/beam
! Combined flux in latest and established models = 0.141476 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.141476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067097Jy  sigma=0.542003
! Fit after  self-cal, rms=0.066891Jy  sigma=0.540900
! Inverting map 
! Added new window around map position (0, -10).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0228488 Jy
! Component: 100  -  total flux cleaned = 0.0343997 Jy
! Total flux subtracted in 100 components = 0.0343997 Jy
! Clean residual min=-0.004815 max=0.008772 Jy/beam
! Clean residual mean=0.000002 rms=0.001330 Jy/beam
! Combined flux in latest and established models = 0.175876 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 19 components and 0.175876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058157Jy  sigma=0.451545
! Fit after  self-cal, rms=0.056732Jy  sigma=0.439765
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00954184 Jy
! Component: 100  -  total flux cleaned = 0.0148338 Jy
! Total flux subtracted in 100 components = 0.0148338 Jy
! Clean residual min=-0.003606 max=0.004216 Jy/beam
! Clean residual mean=-0.000002 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 0.19071 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 0.19071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054962Jy  sigma=0.422324
! Fit after  self-cal, rms=0.054720Jy  sigma=0.420521
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.697 mas, bmaj=6.075 mas, bpa=4.715 degrees
! Estimated noise=0.997485 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00398657 Jy
! Component: 100  -  total flux cleaned = 0.00449298 Jy
! Component: 150  -  total flux cleaned = 0.00472595 Jy
! Component: 200  -  total flux cleaned = 0.0049166 Jy
! Total flux subtracted in 200 components = 0.0049166 Jy
! Clean residual min=-0.002670 max=0.002779 Jy/beam
! Clean residual mean=0.000001 rms=0.000659 Jy/beam
! Combined flux in latest and established models = 0.195626 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 34 components and 0.195626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054233Jy  sigma=0.416432
! Fit after  self-cal, rms=0.054148Jy  sigma=0.415832
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.697 x 6.075 at 4.715 degrees (North through East)
! Clean map  min=-0.0027033  max=0.14023 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.02     HN        0.99     KP        0.99     
!   LA        1.05     MK        0.99     NL        0.99     OV        1.02     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        0.97     KP        0.99     
!   LA        1.02     MK        1.02     NL        0.97     OV        0.97     
!   PT        0.99     SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.02     KP        0.98     
!   LA        1.04     MK        0.96     NL        1.00     OV        0.98     
!   PT        1.00     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.054148Jy  sigma=0.415832
! Fit after  self-cal, rms=0.052546Jy  sigma=0.412902
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.679 mas, bmaj=6.041 mas, bpa=4.978 degrees
! Estimated noise=0.986606 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0016209 Jy
! Component: 100  -  total flux cleaned = 0.0017351 Jy
! Component: 150  -  total flux cleaned = 0.00187028 Jy
! Component: 200  -  total flux cleaned = 0.00190549 Jy
! Total flux subtracted in 200 components = 0.00190549 Jy
! Clean residual min=-0.002300 max=0.002466 Jy/beam
! Clean residual mean=-0.000003 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.197532 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 55 components and 0.197532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052416Jy  sigma=0.411873
! Fit after  self-cal, rms=0.052374Jy  sigma=0.411661
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052374Jy  sigma=0.411661
! Fit after  self-cal, rms=0.053373Jy  sigma=0.407898
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.666 mas, bmaj=6.06 mas, bpa=5.188 degrees
! Estimated noise=0.988481 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000504247 Jy
! Component: 100  -  total flux cleaned = 0.000670438 Jy
! Component: 150  -  total flux cleaned = 0.000771011 Jy
! Component: 200  -  total flux cleaned = 0.000836265 Jy
! Total flux subtracted in 200 components = 0.000836265 Jy
! Clean residual min=-0.002027 max=0.002430 Jy/beam
! Clean residual mean=-0.000002 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.198368 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 66 components and 0.198368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053327Jy  sigma=0.407511
! Fit after  self-cal, rms=0.053323Jy  sigma=0.407382
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (80, -40.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011847 Jy
! Component: 100  -  total flux cleaned = 0.00128818 Jy
! Component: 150  -  total flux cleaned = 0.00137057 Jy
! Component: 200  -  total flux cleaned = 0.00144505 Jy
! Total flux subtracted in 200 components = 0.00144505 Jy
! Clean residual min=-0.001709 max=0.001825 Jy/beam
! Clean residual mean=-0.000001 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.199813 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 81 components and 0.199813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053207Jy  sigma=0.406372
! Fit after  self-cal, rms=0.053200Jy  sigma=0.406343
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053200Jy  sigma=0.406343
! Fit after  self-cal, rms=0.053234Jy  sigma=0.406303
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.665 mas, bmaj=6.061 mas, bpa=5.192 degrees
! Estimated noise=0.98805 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139915 Jy
! Component: 100  -  total flux cleaned = 0.000203297 Jy
! Component: 150  -  total flux cleaned = 0.000288946 Jy
! Component: 200  -  total flux cleaned = 0.00034157 Jy
! Total flux subtracted in 200 components = 0.00034157 Jy
! Clean residual min=-0.001645 max=0.001691 Jy/beam
! Clean residual mean=-0.000001 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.200155 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 87 components and 0.200155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053200Jy  sigma=0.406038
! Fit after  self-cal, rms=0.053199Jy  sigma=0.406027
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.94173e-05 Jy
! Component: 100  -  total flux cleaned = 0.000114421 Jy
! Component: 150  -  total flux cleaned = 0.000135782 Jy
! Component: 200  -  total flux cleaned = 0.000175924 Jy
! Total flux subtracted in 200 components = 0.000175924 Jy
! Clean residual min=-0.001588 max=0.001653 Jy/beam
! Clean residual mean=-0.000001 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.20033 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 94 components and 0.20033 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053180Jy  sigma=0.405882
! Fit after  self-cal, rms=0.053179Jy  sigma=0.405875
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053179Jy  sigma=0.405875
! Fit after  self-cal, rms=0.053198Jy  sigma=0.405862
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.914 mas, bmaj=9.828 mas, bpa=6.032 degrees
! Estimated noise=1.18375 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00073899 Jy
! Component: 100  -  total flux cleaned = 0.000798554 Jy
! Component: 150  -  total flux cleaned = 0.000782707 Jy
! Component: 200  -  total flux cleaned = 0.000783719 Jy
! Total flux subtracted in 200 components = 0.000783719 Jy
! Clean residual min=-0.001761 max=0.001910 Jy/beam
! Clean residual mean=-0.000002 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.201114 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 111 components and 0.201114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053194Jy  sigma=0.405812
! Fit after  self-cal, rms=0.053191Jy  sigma=0.405792
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.97031e-05 Jy
! Component: 100  -  total flux cleaned = 6.56533e-06 Jy
! Component: 150  -  total flux cleaned = 6.4257e-06 Jy
! Component: 200  -  total flux cleaned = 6.08287e-06 Jy
! Total flux subtracted in 200 components = 6.08287e-06 Jy
! Clean residual min=-0.001769 max=0.001879 Jy/beam
! Clean residual mean=-0.000002 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.20112 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 125 components and 0.20112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053191Jy  sigma=0.405787
! Fit after  self-cal, rms=0.053189Jy  sigma=0.405775
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.663 mas, bmaj=6.062 mas, bpa=5.227 degrees
! Estimated noise=0.988341 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.663 x 6.062 at 5.227 degrees (North through East)
! Clean map  min=-0.0017059  max=0.1389 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.03 mas, bmaj=5.094 mas, bpa=-2.537 degrees
! Estimated noise=1.36983 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.109383 Jy
! Component: 100  -  total flux cleaned = 0.14706 Jy
! Component: 150  -  total flux cleaned = 0.167939 Jy
! Component: 200  -  total flux cleaned = 0.180299 Jy
! Total flux subtracted in 200 components = 0.180299 Jy
! Clean residual min=-0.003480 max=0.006303 Jy/beam
! Clean residual mean=0.000006 rms=0.000867 Jy/beam
! Combined flux in latest and established models = 0.180298 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.180298 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.663 mas, bmaj=6.062 mas, bpa=5.227 degrees
! Estimated noise=0.988341 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00911121 Jy
! Component: 100  -  total flux cleaned = 0.0140316 Jy
! Component: 150  -  total flux cleaned = 0.0170477 Jy
! Component: 200  -  total flux cleaned = 0.0181083 Jy
! Total flux subtracted in 200 components = 0.0181083 Jy
! Clean residual min=-0.002225 max=0.002164 Jy/beam
! Clean residual mean=-0.000000 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.198407 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 32 components and 0.198407 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.914 mas, bmaj=9.828 mas, bpa=6.032 degrees
! Estimated noise=1.18375 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00216227 Jy
! Component: 100  -  total flux cleaned = 0.00265013 Jy
! Component: 150  -  total flux cleaned = 0.00273357 Jy
! Component: 200  -  total flux cleaned = 0.00269884 Jy
! Total flux subtracted in 200 components = 0.00269884 Jy
! Clean residual min=-0.001794 max=0.002216 Jy/beam
! Clean residual mean=-0.000002 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.201106 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, -21.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00186946 Jy
! Component: 100  -  total flux cleaned = 0.0021833 Jy
! Component: 150  -  total flux cleaned = 0.0023365 Jy
! Component: 200  -  total flux cleaned = 0.00247168 Jy
! Total flux subtracted in 200 components = 0.00247168 Jy
! Clean residual min=-0.001676 max=0.001499 Jy/beam
! Clean residual mean=-0.000005 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.203577 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 74 components and 0.203577 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.663 mas, bmaj=6.062 mas, bpa=5.227 degrees
! Estimated noise=0.988341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000508692 Jy
! Component: 100  -  total flux cleaned = 0.000276043 Jy
! Component: 150  -  total flux cleaned = 0.000222633 Jy
! Component: 200  -  total flux cleaned = 8.30614e-05 Jy
! Total flux subtracted in 200 components = 8.30614e-05 Jy
! Clean residual min=-0.001781 max=0.001490 Jy/beam
! Clean residual mean=-0.000002 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.20366 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 94 components and 0.20366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053227Jy  sigma=0.405934
! Fit after  self-cal, rms=0.053207Jy  sigma=0.405803
wmodel J1721+3542_S_map.mod
! Writing 94 model components to file: J1721+3542_S_map.mod
wobs   J1721+3542_S_uvs.fits
! Writing UV FITS file: J1721+3542_S_uvs.fits
wwins  J1721+3542_S_map.win
! wwins: Wrote 4 windows to J1721+3542_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000715512 Jy
! Component: 100  -  total flux cleaned = -0.00108802 Jy
! Component: 150  -  total flux cleaned = -0.00126595 Jy
! Component: 200  -  total flux cleaned = -0.00136378 Jy
! Component: 250  -  total flux cleaned = -0.00143495 Jy
! Component: 300  -  total flux cleaned = -0.00143503 Jy
! Component: 350  -  total flux cleaned = -0.00138999 Jy
! Component: 400  -  total flux cleaned = -0.00141173 Jy
! Component: 450  -  total flux cleaned = -0.00128258 Jy
! Component: 500  -  total flux cleaned = -0.00128246 Jy
! Component: 550  -  total flux cleaned = -0.00115867 Jy
! Component: 600  -  total flux cleaned = -0.0010775 Jy
! Component: 650  -  total flux cleaned = -0.000958191 Jy
! Component: 700  -  total flux cleaned = -0.000859978 Jy
! Component: 750  -  total flux cleaned = -0.000763338 Jy
! Component: 800  -  total flux cleaned = -0.000668309 Jy
! Component: 850  -  total flux cleaned = -0.00053714 Jy
! Component: 900  -  total flux cleaned = -0.000389941 Jy
! Component: 950  -  total flux cleaned = -0.00028133 Jy
! Component: 1000  -  total flux cleaned = -0.000138415 Jy
! Component: 1050  -  total flux cleaned = -6.78509e-05 Jy
! Component: 1100  -  total flux cleaned = 3.69474e-05 Jy
! Component: 1150  -  total flux cleaned = 0.000140374 Jy
! Component: 1200  -  total flux cleaned = 0.000225343 Jy
! Component: 1250  -  total flux cleaned = 0.000309294 Jy
! Component: 1300  -  total flux cleaned = 0.000408935 Jy
! Component: 1350  -  total flux cleaned = 0.0004748 Jy
! Component: 1400  -  total flux cleaned = 0.000539846 Jy
! Component: 1450  -  total flux cleaned = 0.000620231 Jy
! Component: 1500  -  total flux cleaned = 0.000667849 Jy
! Component: 1550  -  total flux cleaned = 0.000667798 Jy
! Component: 1600  -  total flux cleaned = 0.000714707 Jy
! Component: 1650  -  total flux cleaned = 0.00076113 Jy
! Component: 1700  -  total flux cleaned = 0.000730211 Jy
! Component: 1750  -  total flux cleaned = 0.00074558 Jy
! Component: 1800  -  total flux cleaned = 0.00076077 Jy
! Component: 1850  -  total flux cleaned = 0.000730888 Jy
! Component: 1900  -  total flux cleaned = 0.000775344 Jy
! Component: 1950  -  total flux cleaned = 0.000775377 Jy
! Component: 2000  -  total flux cleaned = 0.000746372 Jy
! Component: 2050  -  total flux cleaned = 0.000688889 Jy
! Component: 2100  -  total flux cleaned = 0.000745882 Jy
! Component: 2150  -  total flux cleaned = 0.000745776 Jy
! Component: 2200  -  total flux cleaned = 0.000745836 Jy
! Component: 2250  -  total flux cleaned = 0.000773809 Jy
! Component: 2300  -  total flux cleaned = 0.000773783 Jy
! Component: 2350  -  total flux cleaned = 0.000746273 Jy
! Component: 2400  -  total flux cleaned = 0.000801081 Jy
! Component: 2450  -  total flux cleaned = 0.000760347 Jy
! Component: 2500  -  total flux cleaned = 0.000773857 Jy
! Component: 2550  -  total flux cleaned = 0.000854185 Jy
! Component: 2600  -  total flux cleaned = 0.000880731 Jy
! Component: 2650  -  total flux cleaned = 0.000920334 Jy
! Component: 2700  -  total flux cleaned = 0.0009467 Jy
! Component: 2750  -  total flux cleaned = 0.000985858 Jy
! Component: 2800  -  total flux cleaned = 0.000998874 Jy
! Component: 2850  -  total flux cleaned = 0.00108911 Jy
! Component: 2900  -  total flux cleaned = 0.00110181 Jy
! Component: 2950  -  total flux cleaned = 0.00114018 Jy
! Component: 3000  -  total flux cleaned = 0.0011782 Jy
! Component: 3050  -  total flux cleaned = 0.00122859 Jy
! Component: 3100  -  total flux cleaned = 0.00127862 Jy
! Component: 3150  -  total flux cleaned = 0.00127868 Jy
! Component: 3200  -  total flux cleaned = 0.0013034 Jy
! Component: 3250  -  total flux cleaned = 0.00137719 Jy
! Component: 3300  -  total flux cleaned = 0.00143832 Jy
! Component: 3350  -  total flux cleaned = 0.00149896 Jy
! Component: 3400  -  total flux cleaned = 0.00149892 Jy
! Component: 3450  -  total flux cleaned = 0.00155894 Jy
! Component: 3500  -  total flux cleaned = 0.00158288 Jy
! Component: 3550  -  total flux cleaned = 0.00161848 Jy
! Component: 3600  -  total flux cleaned = 0.00161847 Jy
! Component: 3650  -  total flux cleaned = 0.00168905 Jy
! Component: 3700  -  total flux cleaned = 0.00174745 Jy
! Component: 3750  -  total flux cleaned = 0.00178234 Jy
! Component: 3800  -  total flux cleaned = 0.00185177 Jy
! Component: 3850  -  total flux cleaned = 0.00185177 Jy
! Component: 3900  -  total flux cleaned = 0.00195493 Jy
! Component: 3950  -  total flux cleaned = 0.00198919 Jy
! Component: 4000  -  total flux cleaned = 0.00205719 Jy
! Component: 4050  -  total flux cleaned = 0.00207969 Jy
! Total flux subtracted in 4096 components = 0.00211342 Jy
! Clean residual min=-0.000711 max=0.000601 Jy/beam
! Clean residual mean=-0.000001 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.205774 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 392 components and 0.205774 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1721+3542_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.663 x 6.062 at 5.227 degrees (North through East)
! Clean map  min=-0.0012688  max=0.13848 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1721+3542_S_map.fits
wmodel /image_prod/ug002_uva//J1721+3542_S_map.mod
! Writing 392 model components to file: /image_prod/ug002_uva//J1721+3542_S_map.mod
wobs   /image_prod/ug002_uva//J1721+3542_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1721+3542_S_uvs.fits
wwins  /image_prod/ug002_uva//J1721+3542_S_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J1721+3542_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.138477 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000199437 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.432065 0.432065 0.86413 1.72826 3.45652 6.91304 13.8261 27.6522 55.3043
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.138 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  694.339 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1721+3542_S_dfm.log closed on Thu Mar  5 03:12:19 2020