! Started logfile: /image_prod/ug002_uva//J1719+4804_S_dfm.log on Thu Mar 5 03:11:27 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1719+4804_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1719+4804_S_uva.fits ! AN table 1: 90 integrations on 36 of 36 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1719+4804 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 9720 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1719+4804_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.008285Jy sigma=8.551427 ! Fit after self-cal, rms=0.910425Jy sigma=7.747500 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=4.436 mas, bpa=-8.266 degrees ! Estimated noise=1.73017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0713258 Jy ! Component: 100 - total flux cleaned = 0.0870016 Jy ! Total flux subtracted in 100 components = 0.0870016 Jy ! Clean residual min=-0.004440 max=0.005133 Jy/beam ! Clean residual mean=0.000000 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 0.0870017 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0870017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064609Jy sigma=0.471547 ! Fit after self-cal, rms=0.064552Jy sigma=0.471025 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.784 mas, bmaj=5.385 mas, bpa=-7.796 degrees ! Estimated noise=0.881168 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402669 Jy ! Component: 100 - total flux cleaned = 0.00430813 Jy ! Component: 150 - total flux cleaned = 0.00418547 Jy ! Component: 200 - total flux cleaned = 0.00408411 Jy ! Total flux subtracted in 200 components = 0.00408411 Jy ! Clean residual min=-0.004052 max=0.003266 Jy/beam ! Clean residual mean=0.000001 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.0910858 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 0.0910858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064213Jy sigma=0.469356 ! Fit after self-cal, rms=0.064223Jy sigma=0.469314 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.784 x 5.385 at -7.796 degrees (North through East) ! Clean map min=-0.0039501 max=0.090901 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 1.00 KP 0.93 ! LA 1.02 MK 0.98 NL 1.01 OV 1.01 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.97 HN 1.01 KP 1.01 ! LA 1.00 MK 0.97 NL 1.12 OV 1.21 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 0.96 KP 1.00 ! LA 1.01 MK 1.03 NL 1.03 OV 1.04 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.064223Jy sigma=0.469314 ! Fit after self-cal, rms=0.063735Jy sigma=0.465060 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.773 mas, bmaj=5.35 mas, bpa=-7.567 degrees ! Estimated noise=0.879989 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104225 Jy ! Component: 100 - total flux cleaned = 0.00107223 Jy ! Component: 150 - total flux cleaned = 0.00105412 Jy ! Component: 200 - total flux cleaned = 0.00105433 Jy ! Total flux subtracted in 200 components = 0.00105433 Jy ! Clean residual min=-0.003755 max=0.002885 Jy/beam ! Clean residual mean=-0.000004 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.0921401 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.0921401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063701Jy sigma=0.465009 ! Fit after self-cal, rms=0.063698Jy sigma=0.464907 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063698Jy sigma=0.464907 ! Fit after self-cal, rms=0.065163Jy sigma=0.455859 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=5.346 mas, bpa=-7.708 degrees ! Estimated noise=0.881181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001492 Jy ! Component: 100 - total flux cleaned = 0.000167516 Jy ! Component: 150 - total flux cleaned = 0.000183734 Jy ! Component: 200 - total flux cleaned = 0.000183578 Jy ! Total flux subtracted in 200 components = 0.000183578 Jy ! Clean residual min=-0.001888 max=0.001702 Jy/beam ! Clean residual mean=-0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0923237 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.0923237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065152Jy sigma=0.455794 ! Fit after self-cal, rms=0.065203Jy sigma=0.455621 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.84756e-05 Jy ! Component: 100 - total flux cleaned = 2.48502e-05 Jy ! Component: 150 - total flux cleaned = 1.20673e-05 Jy ! Component: 200 - total flux cleaned = 1.40606e-07 Jy ! Total flux subtracted in 200 components = 1.40606e-07 Jy ! Clean residual min=-0.001882 max=0.001682 Jy/beam ! Clean residual mean=-0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0923238 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.0923238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065196Jy sigma=0.455589 ! Fit after self-cal, rms=0.065195Jy sigma=0.455585 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065195Jy sigma=0.455585 ! Fit after self-cal, rms=0.065560Jy sigma=0.455552 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=5.338 mas, bpa=-7.557 degrees ! Estimated noise=0.882308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.16777e-05 Jy ! Component: 100 - total flux cleaned = 7.14874e-05 Jy ! Component: 150 - total flux cleaned = 8.40396e-05 Jy ! Component: 200 - total flux cleaned = 7.24975e-05 Jy ! Total flux subtracted in 200 components = 7.24975e-05 Jy ! Clean residual min=-0.001958 max=0.001681 Jy/beam ! Clean residual mean=0.000000 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0923963 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0923963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065553Jy sigma=0.455514 ! Fit after self-cal, rms=0.065555Jy sigma=0.455511 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.63065e-05 Jy ! Component: 100 - total flux cleaned = 4.26206e-06 Jy ! Component: 150 - total flux cleaned = -6.20068e-06 Jy ! Component: 200 - total flux cleaned = -6.10841e-06 Jy ! Total flux subtracted in 200 components = -6.10841e-06 Jy ! Clean residual min=-0.001951 max=0.001665 Jy/beam ! Clean residual mean=0.000000 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0923902 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.0923902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065550Jy sigma=0.455488 ! Fit after self-cal, rms=0.065550Jy sigma=0.455485 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065550Jy sigma=0.455485 ! Fit after self-cal, rms=0.065659Jy sigma=0.455480 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.61 mas, bmaj=8.511 mas, bpa=0.5217 degrees ! Estimated noise=1.03464 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000205958 Jy ! Component: 100 - total flux cleaned = 0.000204494 Jy ! Component: 150 - total flux cleaned = 0.000208772 Jy ! Component: 200 - total flux cleaned = 0.000212766 Jy ! Total flux subtracted in 200 components = 0.000212766 Jy ! Clean residual min=-0.001680 max=0.001581 Jy/beam ! Clean residual mean=-0.000001 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.092603 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 40 components and 0.092603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065659Jy sigma=0.455480 ! Fit after self-cal, rms=0.065659Jy sigma=0.455474 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.10228e-05 Jy ! Component: 100 - total flux cleaned = 1.47097e-05 Jy ! Component: 150 - total flux cleaned = 1.84573e-05 Jy ! Component: 200 - total flux cleaned = 2.19749e-05 Jy ! Total flux subtracted in 200 components = 2.19749e-05 Jy ! Clean residual min=-0.001671 max=0.001580 Jy/beam ! Clean residual mean=-0.000001 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0926249 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 43 components and 0.0926249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065659Jy sigma=0.455480 ! Fit after self-cal, rms=0.065659Jy sigma=0.455478 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.781 mas, bmaj=5.333 mas, bpa=-7.416 degrees ! Estimated noise=0.88322 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.781 x 5.333 at -7.416 degrees (North through East) ! Clean map min=-0.0018907 max=0.090982 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=4.409 mas, bpa=-8.406 degrees ! Estimated noise=1.71422 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0706529 Jy ! Component: 100 - total flux cleaned = 0.0863318 Jy ! Component: 150 - total flux cleaned = 0.0910405 Jy ! Component: 200 - total flux cleaned = 0.0933203 Jy ! Total flux subtracted in 200 components = 0.0933203 Jy ! Clean residual min=-0.003832 max=0.003418 Jy/beam ! Clean residual mean=0.000001 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.0933203 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0933203 Jy ! Inverting map and beam ! Estimated beam: bmin=3.781 mas, bmaj=5.333 mas, bpa=-7.416 degrees ! Estimated noise=0.88322 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123507 Jy ! Component: 100 - total flux cleaned = -1.17593e-05 Jy ! Component: 150 - total flux cleaned = -0.000117562 Jy ! Component: 200 - total flux cleaned = -0.00022586 Jy ! Total flux subtracted in 200 components = -0.00022586 Jy ! Clean residual min=-0.001910 max=0.001622 Jy/beam ! Clean residual mean=-0.000000 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.0930944 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 19 components and 0.0930944 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.61 mas, bmaj=8.511 mas, bpa=0.5217 degrees ! Estimated noise=1.03464 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000194478 Jy ! Component: 100 - total flux cleaned = -0.00019502 Jy ! Component: 150 - total flux cleaned = -0.000224155 Jy ! Component: 200 - total flux cleaned = -0.00024883 Jy ! Total flux subtracted in 200 components = -0.00024883 Jy ! Clean residual min=-0.001686 max=0.001583 Jy/beam ! Clean residual mean=-0.000001 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0928456 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.09614e-05 Jy ! Component: 100 - total flux cleaned = -3.90714e-05 Jy ! Component: 150 - total flux cleaned = -5.1317e-05 Jy ! Component: 200 - total flux cleaned = -6.66978e-05 Jy ! Total flux subtracted in 200 components = -6.66978e-05 Jy ! Clean residual min=-0.001682 max=0.001581 Jy/beam ! Clean residual mean=-0.000001 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0927789 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.0927789 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.781 mas, bmaj=5.333 mas, bpa=-7.416 degrees ! Estimated noise=0.88322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163668 Jy ! Component: 100 - total flux cleaned = 0.000101096 Jy ! Component: 150 - total flux cleaned = 4.5067e-05 Jy ! Component: 200 - total flux cleaned = 6.2196e-06 Jy ! Total flux subtracted in 200 components = 6.2196e-06 Jy ! Clean residual min=-0.001946 max=0.001684 Jy/beam ! Clean residual mean=0.000000 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0927851 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.0927851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065663Jy sigma=0.455501 ! Fit after self-cal, rms=0.065663Jy sigma=0.455499 wmodel J1719+4804_S_map.mod ! Writing 36 model components to file: J1719+4804_S_map.mod wobs J1719+4804_S_uvs.fits ! Writing UV FITS file: J1719+4804_S_uvs.fits wwins J1719+4804_S_map.win ! wwins: Wrote 1 windows to J1719+4804_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319476 Jy ! Component: 100 - total flux cleaned = -0.000644076 Jy ! Component: 150 - total flux cleaned = -0.00089949 Jy ! Component: 200 - total flux cleaned = -0.00102272 Jy ! Component: 250 - total flux cleaned = -0.00102314 Jy ! Component: 300 - total flux cleaned = -0.00116199 Jy ! Component: 350 - total flux cleaned = -0.00116225 Jy ! Component: 400 - total flux cleaned = -0.00114032 Jy ! Component: 450 - total flux cleaned = -0.00101216 Jy ! Component: 500 - total flux cleaned = -0.000886927 Jy ! Component: 550 - total flux cleaned = -0.000845876 Jy ! Component: 600 - total flux cleaned = -0.000744943 Jy ! Component: 650 - total flux cleaned = -0.00072493 Jy ! Component: 700 - total flux cleaned = -0.000647173 Jy ! Component: 750 - total flux cleaned = -0.000628165 Jy ! Component: 800 - total flux cleaned = -0.000534079 Jy ! Component: 850 - total flux cleaned = -0.000497315 Jy ! Component: 900 - total flux cleaned = -0.000442583 Jy ! Component: 950 - total flux cleaned = -0.000424377 Jy ! Component: 1000 - total flux cleaned = -0.000371057 Jy ! Component: 1050 - total flux cleaned = -0.000266573 Jy ! Component: 1100 - total flux cleaned = -0.000249188 Jy ! Component: 1150 - total flux cleaned = -0.000181114 Jy ! Component: 1200 - total flux cleaned = -8.05633e-05 Jy ! Component: 1250 - total flux cleaned = -6.37043e-05 Jy ! Component: 1300 - total flux cleaned = -3.10645e-05 Jy ! Component: 1350 - total flux cleaned = 8.22015e-05 Jy ! Component: 1400 - total flux cleaned = 9.78007e-05 Jy ! Component: 1450 - total flux cleaned = 0.000145157 Jy ! Component: 1500 - total flux cleaned = 0.000270196 Jy ! Component: 1550 - total flux cleaned = 0.000316358 Jy ! Component: 1600 - total flux cleaned = 0.000316538 Jy ! Component: 1650 - total flux cleaned = 0.000377153 Jy ! Component: 1700 - total flux cleaned = 0.000406959 Jy ! Component: 1750 - total flux cleaned = 0.000481262 Jy ! Component: 1800 - total flux cleaned = 0.000525561 Jy ! Component: 1850 - total flux cleaned = 0.000584111 Jy ! Component: 1900 - total flux cleaned = 0.000584058 Jy ! Component: 1950 - total flux cleaned = 0.000655811 Jy ! Component: 2000 - total flux cleaned = 0.000670293 Jy ! Component: 2050 - total flux cleaned = 0.000754751 Jy ! Component: 2100 - total flux cleaned = 0.000768848 Jy ! Component: 2150 - total flux cleaned = 0.000851652 Jy ! Component: 2200 - total flux cleaned = 0.000879033 Jy ! Component: 2250 - total flux cleaned = 0.000892813 Jy ! Component: 2300 - total flux cleaned = 0.000933082 Jy ! Component: 2350 - total flux cleaned = 0.000919636 Jy ! Component: 2400 - total flux cleaned = 0.000946083 Jy ! Component: 2450 - total flux cleaned = 0.000959142 Jy ! Component: 2500 - total flux cleaned = 0.000985214 Jy ! Component: 2550 - total flux cleaned = 0.000959201 Jy ! Component: 2600 - total flux cleaned = 0.00103611 Jy ! Component: 2650 - total flux cleaned = 0.000985219 Jy ! Component: 2700 - total flux cleaned = 0.00103576 Jy ! Component: 2750 - total flux cleaned = 0.00102327 Jy ! Component: 2800 - total flux cleaned = 0.00113508 Jy ! Component: 2850 - total flux cleaned = 0.00109794 Jy ! Component: 2900 - total flux cleaned = 0.00115918 Jy ! Component: 2950 - total flux cleaned = 0.00115934 Jy ! Component: 3000 - total flux cleaned = 0.00123185 Jy ! Component: 3050 - total flux cleaned = 0.00123196 Jy ! Component: 3100 - total flux cleaned = 0.00129159 Jy ! Component: 3150 - total flux cleaned = 0.00136258 Jy ! Component: 3200 - total flux cleaned = 0.0013977 Jy ! Component: 3250 - total flux cleaned = 0.00145604 Jy ! Component: 3300 - total flux cleaned = 0.00146772 Jy ! Component: 3350 - total flux cleaned = 0.00154832 Jy ! Component: 3400 - total flux cleaned = 0.00162837 Jy ! Component: 3450 - total flux cleaned = 0.0016624 Jy ! Component: 3500 - total flux cleaned = 0.00176395 Jy ! Component: 3550 - total flux cleaned = 0.00179764 Jy ! Component: 3600 - total flux cleaned = 0.00178647 Jy ! Component: 3650 - total flux cleaned = 0.00185303 Jy ! Component: 3700 - total flux cleaned = 0.00189705 Jy ! Component: 3750 - total flux cleaned = 0.00196283 Jy ! Component: 3800 - total flux cleaned = 0.00191924 Jy ! Component: 3850 - total flux cleaned = 0.00203843 Jy ! Component: 3900 - total flux cleaned = 0.00209231 Jy ! Component: 3950 - total flux cleaned = 0.00211374 Jy ! Component: 4000 - total flux cleaned = 0.00215635 Jy ! Component: 4050 - total flux cleaned = 0.00219878 Jy ! Total flux subtracted in 4096 components = 0.00225142 Jy ! Clean residual min=-0.000644 max=0.000679 Jy/beam ! Clean residual mean=-0.000000 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.0950365 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 348 components and 0.0950366 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1719+4804_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.781 x 5.333 at -7.416 degrees (North through East) ! Clean map min=-0.0011424 max=0.091016 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1719+4804_S_map.fits wmodel /image_prod/ug002_uva//J1719+4804_S_map.mod ! Writing 348 model components to file: /image_prod/ug002_uva//J1719+4804_S_map.mod wobs /image_prod/ug002_uva//J1719+4804_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1719+4804_S_uvs.fits wwins /image_prod/ug002_uva//J1719+4804_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1719+4804_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0910161 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000181914 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.599609 0.599609 1.19922 2.39844 4.79687 9.59374 19.1875 38.375 76.7499 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.091 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 500.326 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1719+4804_S_dfm.log closed on Thu Mar 5 03:11:30 2020