! Started logfile: /image_prod/ug002_uva//J1643-2316_S_dfm.log on Thu Mar  5 02:53:46 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J1643-2316_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1643-2316_S_uva.fits
! AN table 1: 40 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.978333 visibilities/baseline/integration-bin.
! Found source: J1643-2316
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5283 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1643-2316_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019727Jy  sigma=6.666334
! Fit after  self-cal, rms=0.889658Jy  sigma=5.658148
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.508 mas, bmaj=7.047 mas, bpa=-7.864 degrees
! Estimated noise=2.03157 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0886785 Jy
! Component: 100  -  total flux cleaned = 0.120553 Jy
! Total flux subtracted in 100 components = 0.120553 Jy
! Clean residual min=-0.014275 max=0.033878 Jy/beam
! Clean residual mean=0.000017 rms=0.004453 Jy/beam
! Combined flux in latest and established models = 0.120553 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.120553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116229Jy  sigma=0.748620
! Fit after  self-cal, rms=0.116106Jy  sigma=0.746819
! Inverting map 
! Added new window around map position (6.5, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0301186 Jy
! Component: 100  -  total flux cleaned = 0.0463494 Jy
! Total flux subtracted in 100 components = 0.0463494 Jy
! Clean residual min=-0.011772 max=0.032190 Jy/beam
! Clean residual mean=-0.000017 rms=0.003485 Jy/beam
! Combined flux in latest and established models = 0.166902 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 40 components and 0.166902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106408Jy  sigma=0.659172
! Fit after  self-cal, rms=0.104527Jy  sigma=0.644228
! Inverting map 
! Added new window around map position (-7.5, 4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0266107 Jy
! Component: 100  -  total flux cleaned = 0.0428116 Jy
! Total flux subtracted in 100 components = 0.0428116 Jy
! Clean residual min=-0.010065 max=0.012987 Jy/beam
! Clean residual mean=-0.000041 rms=0.002435 Jy/beam
! Combined flux in latest and established models = 0.209714 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 50 components and 0.209714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095662Jy  sigma=0.572629
! Fit after  self-cal, rms=0.095372Jy  sigma=0.570791
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.043 mas, bmaj=8.219 mas, bpa=-6.613 degrees
! Estimated noise=1.54084 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0209414 Jy
! Component: 100  -  total flux cleaned = 0.0353529 Jy
! Component: 150  -  total flux cleaned = 0.0456477 Jy
! Component: 200  -  total flux cleaned = 0.0531506 Jy
! Total flux subtracted in 200 components = 0.0531506 Jy
! Clean residual min=-0.008124 max=0.007969 Jy/beam
! Clean residual mean=-0.000053 rms=0.002173 Jy/beam
! Combined flux in latest and established models = 0.262865 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 78 components and 0.262865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090356Jy  sigma=0.522633
! Fit after  self-cal, rms=0.090154Jy  sigma=0.521463
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.043 x 8.219 at -6.613 degrees (North through East)
! Clean map  min=-0.0080504  max=0.10002 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        1.13     KP        0.98     
!   LA        0.94     MK        1.03     NL        1.09     OV        0.90     
!   PT        0.96     SC        1.10     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        2.10     FD        0.97     HN        1.18     KP        0.91     
!   LA        0.97     MK        1.10     NL        1.15     OV        0.94     
!   PT        0.95     SC        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        0.97     HN        1.16     KP        0.89     
!   LA        0.96     MK        1.08     NL        1.05     OV        0.96     
!   PT        0.95     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.090154Jy  sigma=0.521463
! Fit after  self-cal, rms=0.107468Jy  sigma=0.499990
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.107 mas, bmaj=8.359 mas, bpa=-5.988 degrees
! Estimated noise=1.57951 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00142776 Jy
! Component: 100  -  total flux cleaned = 0.00222667 Jy
! Component: 150  -  total flux cleaned = 0.00265649 Jy
! Component: 200  -  total flux cleaned = 0.00292592 Jy
! Total flux subtracted in 200 components = 0.00292592 Jy
! Clean residual min=-0.008102 max=0.006298 Jy/beam
! Clean residual mean=-0.000026 rms=0.001631 Jy/beam
! Combined flux in latest and established models = 0.265791 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 91 components and 0.265791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107051Jy  sigma=0.498572
! Fit after  self-cal, rms=0.107374Jy  sigma=0.498058
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107374Jy  sigma=0.498058
! Fit after  self-cal, rms=0.110998Jy  sigma=0.496151
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.1 mas, bmaj=8.34 mas, bpa=-5.782 degrees
! Estimated noise=1.57486 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153895 Jy
! Component: 100  -  total flux cleaned = 0.00192609 Jy
! Component: 150  -  total flux cleaned = 0.00217598 Jy
! Component: 200  -  total flux cleaned = 0.00217715 Jy
! Total flux subtracted in 200 components = 0.00217715 Jy
! Clean residual min=-0.007809 max=0.006267 Jy/beam
! Clean residual mean=-0.000017 rms=0.001556 Jy/beam
! Combined flux in latest and established models = 0.267968 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 98 components and 0.267968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110773Jy  sigma=0.495359
! Fit after  self-cal, rms=0.110793Jy  sigma=0.495154
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.28613e-05 Jy
! Component: 100  -  total flux cleaned = 9.13972e-05 Jy
! Component: 150  -  total flux cleaned = 9.13266e-05 Jy
! Component: 200  -  total flux cleaned = 9.3698e-05 Jy
! Total flux subtracted in 200 components = 9.3698e-05 Jy
! Clean residual min=-0.007743 max=0.006277 Jy/beam
! Clean residual mean=-0.000017 rms=0.001537 Jy/beam
! Combined flux in latest and established models = 0.268061 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 101 components and 0.268062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110649Jy  sigma=0.494548
! Fit after  self-cal, rms=0.110626Jy  sigma=0.494362
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110626Jy  sigma=0.494362
! Fit after  self-cal, rms=0.111308Jy  sigma=0.492740
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.099 mas, bmaj=8.326 mas, bpa=-5.774 degrees
! Estimated noise=1.56538 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000198622 Jy
! Component: 100  -  total flux cleaned = -0.000356074 Jy
! Component: 150  -  total flux cleaned = -0.000357414 Jy
! Component: 200  -  total flux cleaned = -0.000241993 Jy
! Total flux subtracted in 200 components = -0.000241993 Jy
! Clean residual min=-0.007297 max=0.006029 Jy/beam
! Clean residual mean=-0.000009 rms=0.001459 Jy/beam
! Combined flux in latest and established models = 0.26782 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 107 components and 0.26782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111179Jy  sigma=0.492206
! Fit after  self-cal, rms=0.111167Jy  sigma=0.491974
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000206267 Jy
! Component: 100  -  total flux cleaned = -0.000357344 Jy
! Component: 150  -  total flux cleaned = -0.00042062 Jy
! Component: 200  -  total flux cleaned = -0.000529457 Jy
! Total flux subtracted in 200 components = -0.000529457 Jy
! Clean residual min=-0.007170 max=0.005954 Jy/beam
! Clean residual mean=-0.000009 rms=0.001434 Jy/beam
! Combined flux in latest and established models = 0.26729 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 112 components and 0.26729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111059Jy  sigma=0.491429
! Fit after  self-cal, rms=0.111019Jy  sigma=0.491177
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111019Jy  sigma=0.491177
! Fit after  self-cal, rms=0.110797Jy  sigma=0.491147
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.844 mas, bmaj=19.2 mas, bpa=-2.343 degrees
! Estimated noise=1.91484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000914146 Jy
! Component: 100  -  total flux cleaned = -0.00125635 Jy
! Component: 150  -  total flux cleaned = -0.00160237 Jy
! Component: 200  -  total flux cleaned = -0.00184955 Jy
! Total flux subtracted in 200 components = -0.00184955 Jy
! Clean residual min=-0.007080 max=0.008056 Jy/beam
! Clean residual mean=-0.000017 rms=0.002052 Jy/beam
! Combined flux in latest and established models = 0.265441 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 129 components and 0.265441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110769Jy  sigma=0.490972
! Fit after  self-cal, rms=0.110741Jy  sigma=0.490805
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.72306e-05 Jy
! Component: 100  -  total flux cleaned = -0.000245886 Jy
! Component: 150  -  total flux cleaned = -0.000454326 Jy
! Component: 200  -  total flux cleaned = -0.000597933 Jy
! Total flux subtracted in 200 components = -0.000597933 Jy
! Clean residual min=-0.006714 max=0.007981 Jy/beam
! Clean residual mean=-0.000017 rms=0.002018 Jy/beam
! Combined flux in latest and established models = 0.264843 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 138 components and 0.264843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110730Jy  sigma=0.490934
! Fit after  self-cal, rms=0.110712Jy  sigma=0.490810
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.101 mas, bmaj=8.331 mas, bpa=-5.738 degrees
! Estimated noise=1.55961 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.101 x 8.331 at -5.738 degrees (North through East)
! Clean map  min=-0.0061426  max=0.090793 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.538 mas, bmaj=7.095 mas, bpa=-7.188 degrees
! Estimated noise=2.1042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0953905 Jy
! Component: 100  -  total flux cleaned = 0.142744 Jy
! Component: 150  -  total flux cleaned = 0.170552 Jy
! Component: 200  -  total flux cleaned = 0.190566 Jy
! Total flux subtracted in 200 components = 0.190566 Jy
! Clean residual min=-0.008194 max=0.013683 Jy/beam
! Clean residual mean=0.000025 rms=0.002366 Jy/beam
! Combined flux in latest and established models = 0.190566 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.190566 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.101 mas, bmaj=8.331 mas, bpa=-5.738 degrees
! Estimated noise=1.55961 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0229704 Jy
! Component: 100  -  total flux cleaned = 0.0381768 Jy
! Component: 150  -  total flux cleaned = 0.0487427 Jy
! Component: 200  -  total flux cleaned = 0.0561853 Jy
! Total flux subtracted in 200 components = 0.0561853 Jy
! Clean residual min=-0.005972 max=0.005796 Jy/beam
! Clean residual mean=-0.000015 rms=0.001575 Jy/beam
! Combined flux in latest and established models = 0.246751 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 77 components and 0.246751 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.844 mas, bmaj=19.2 mas, bpa=-2.343 degrees
! Estimated noise=1.91484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00815666 Jy
! Component: 100  -  total flux cleaned = 0.0121792 Jy
! Component: 150  -  total flux cleaned = 0.0143754 Jy
! Component: 200  -  total flux cleaned = 0.0150584 Jy
! Total flux subtracted in 200 components = 0.0150584 Jy
! Clean residual min=-0.006769 max=0.007799 Jy/beam
! Clean residual mean=-0.000020 rms=0.002021 Jy/beam
! Combined flux in latest and established models = 0.261809 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017787 Jy
! Component: 100  -  total flux cleaned = 0.000297759 Jy
! Component: 150  -  total flux cleaned = 0.00040496 Jy
! Component: 200  -  total flux cleaned = 0.000503723 Jy
! Total flux subtracted in 200 components = 0.000503723 Jy
! Clean residual min=-0.006425 max=0.007848 Jy/beam
! Clean residual mean=-0.000019 rms=0.002002 Jy/beam
! Combined flux in latest and established models = 0.262313 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 105 components and 0.262313 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.101 mas, bmaj=8.331 mas, bpa=-5.738 degrees
! Estimated noise=1.55961 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00261213 Jy
! Component: 100  -  total flux cleaned = 0.00271181 Jy
! Component: 150  -  total flux cleaned = 0.002585 Jy
! Component: 200  -  total flux cleaned = 0.00258195 Jy
! Total flux subtracted in 200 components = 0.00258195 Jy
! Clean residual min=-0.006045 max=0.005632 Jy/beam
! Clean residual mean=-0.000009 rms=0.001344 Jy/beam
! Combined flux in latest and established models = 0.264895 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 119 components and 0.264895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.110470Jy  sigma=0.489372
! Fit after  self-cal, rms=0.110316Jy  sigma=0.488462
wmodel J1643-2316_S_map.mod
! Writing 119 model components to file: J1643-2316_S_map.mod
wobs   J1643-2316_S_uvs.fits
! Writing UV FITS file: J1643-2316_S_uvs.fits
wwins  J1643-2316_S_map.win
! wwins: Wrote 3 windows to J1643-2316_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -3.58216e-05 Jy
! Component: 100  -  total flux cleaned = 0.000723401 Jy
! Component: 150  -  total flux cleaned = 0.00119439 Jy
! Component: 200  -  total flux cleaned = 0.000829461 Jy
! Component: 250  -  total flux cleaned = 0.000549245 Jy
! Component: 300  -  total flux cleaned = 0.000212804 Jy
! Component: 350  -  total flux cleaned = 0.000146702 Jy
! Component: 400  -  total flux cleaned = -0.000166215 Jy
! Component: 450  -  total flux cleaned = -0.000165069 Jy
! Component: 500  -  total flux cleaned = -0.000165971 Jy
! Component: 550  -  total flux cleaned = -0.000280682 Jy
! Component: 600  -  total flux cleaned = -0.000169689 Jy
! Component: 650  -  total flux cleaned = -0.000383734 Jy
! Component: 700  -  total flux cleaned = -0.000486119 Jy
! Component: 750  -  total flux cleaned = -0.000534996 Jy
! Component: 800  -  total flux cleaned = -0.000484238 Jy
! Component: 850  -  total flux cleaned = -0.000386255 Jy
! Component: 900  -  total flux cleaned = -0.000435843 Jy
! Component: 950  -  total flux cleaned = -0.000578624 Jy
! Component: 1000  -  total flux cleaned = -0.0006715 Jy
! Component: 1050  -  total flux cleaned = -0.00089773 Jy
! Component: 1100  -  total flux cleaned = -0.000897927 Jy
! Component: 1150  -  total flux cleaned = -0.00107314 Jy
! Component: 1200  -  total flux cleaned = -0.0011581 Jy
! Component: 1250  -  total flux cleaned = -0.00124123 Jy
! Component: 1300  -  total flux cleaned = -0.00136462 Jy
! Component: 1350  -  total flux cleaned = -0.00160993 Jy
! Component: 1400  -  total flux cleaned = -0.00161012 Jy
! Component: 1450  -  total flux cleaned = -0.00184781 Jy
! Component: 1500  -  total flux cleaned = -0.00188705 Jy
! Component: 1550  -  total flux cleaned = -0.00211844 Jy
! Component: 1600  -  total flux cleaned = -0.00219438 Jy
! Component: 1650  -  total flux cleaned = -0.00230593 Jy
! Component: 1700  -  total flux cleaned = -0.00241618 Jy
! Component: 1750  -  total flux cleaned = -0.00245232 Jy
! Component: 1800  -  total flux cleaned = -0.00252397 Jy
! Component: 1850  -  total flux cleaned = -0.00263004 Jy
! Component: 1900  -  total flux cleaned = -0.00263019 Jy
! Component: 1950  -  total flux cleaned = -0.00273355 Jy
! Component: 2000  -  total flux cleaned = -0.00269997 Jy
! Component: 2050  -  total flux cleaned = -0.00276761 Jy
! Component: 2100  -  total flux cleaned = -0.00280058 Jy
! Component: 2150  -  total flux cleaned = -0.00283329 Jy
! Component: 2200  -  total flux cleaned = -0.00289803 Jy
! Component: 2250  -  total flux cleaned = -0.00292984 Jy
! Component: 2300  -  total flux cleaned = -0.00299292 Jy
! Component: 2350  -  total flux cleaned = -0.00311753 Jy
! Component: 2400  -  total flux cleaned = -0.00311734 Jy
! Component: 2450  -  total flux cleaned = -0.00314756 Jy
! Component: 2500  -  total flux cleaned = -0.00314747 Jy
! Component: 2550  -  total flux cleaned = -0.00329625 Jy
! Component: 2600  -  total flux cleaned = -0.0032074 Jy
! Component: 2650  -  total flux cleaned = -0.00320715 Jy
! Component: 2700  -  total flux cleaned = -0.00326487 Jy
! Component: 2750  -  total flux cleaned = -0.00332225 Jy
! Component: 2800  -  total flux cleaned = -0.0033218 Jy
! Component: 2850  -  total flux cleaned = -0.00337787 Jy
! Component: 2900  -  total flux cleaned = -0.00337758 Jy
! Component: 2950  -  total flux cleaned = -0.00340522 Jy
! Component: 3000  -  total flux cleaned = -0.00337753 Jy
! Component: 3050  -  total flux cleaned = -0.00340502 Jy
! Component: 3100  -  total flux cleaned = -0.00348518 Jy
! Component: 3150  -  total flux cleaned = -0.00348521 Jy
! Component: 3200  -  total flux cleaned = -0.00348533 Jy
! Component: 3250  -  total flux cleaned = -0.0036408 Jy
! Component: 3300  -  total flux cleaned = -0.00361478 Jy
! Component: 3350  -  total flux cleaned = -0.00351306 Jy
! Component: 3400  -  total flux cleaned = -0.00353859 Jy
! Component: 3450  -  total flux cleaned = -0.0036388 Jy
! Component: 3500  -  total flux cleaned = -0.00376266 Jy
! Component: 3550  -  total flux cleaned = -0.00373808 Jy
! Component: 3600  -  total flux cleaned = -0.00383537 Jy
! Component: 3650  -  total flux cleaned = -0.00381092 Jy
! Component: 3700  -  total flux cleaned = -0.0039067 Jy
! Component: 3750  -  total flux cleaned = -0.00390679 Jy
! Component: 3800  -  total flux cleaned = -0.0039071 Jy
! Component: 3850  -  total flux cleaned = -0.00395391 Jy
! Component: 3900  -  total flux cleaned = -0.00395383 Jy
! Component: 3950  -  total flux cleaned = -0.00406883 Jy
! Component: 4000  -  total flux cleaned = -0.00400057 Jy
! Component: 4050  -  total flux cleaned = -0.00415912 Jy
! Total flux subtracted in 4096 components = -0.00409144 Jy
! Clean residual min=-0.001309 max=0.001427 Jy/beam
! Clean residual mean=0.000001 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.260804 Jy
keep
! Adding 328 model components to the UV plane model.
! The established model now contains 447 components and 0.260804 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1643-2316_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.101 x 8.331 at -5.738 degrees (North through East)
! Clean map  min=-0.0038809  max=0.089439 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1643-2316_S_map.fits
wmodel /image_prod/ug002_uva//J1643-2316_S_map.mod
! Writing 447 model components to file: /image_prod/ug002_uva//J1643-2316_S_map.mod
wobs   /image_prod/ug002_uva//J1643-2316_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1643-2316_S_uvs.fits
wwins  /image_prod/ug002_uva//J1643-2316_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1643-2316_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0894394 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000427605 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.43428 1.43428 2.86857 5.73714 11.4743 22.9485 45.8971 91.7942
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.089 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  209.163 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1643-2316_S_dfm.log closed on Thu Mar  5 02:53:49 2020