! Started logfile: /image_prod/ug002_uva//J1642+6856_X_a_dfm.log on Thu Mar 5 02:53:01 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1642+6856_X_a_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1642+6856_X_a_uva.fits ! AN table 1: 12 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.851852 visibilities/baseline/integration-bin. ! Found source: J1642+6856 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 4416 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1642+6856_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.605738Jy sigma=9.164425 ! Fit after self-cal, rms=0.510273Jy sigma=2.974596 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8632 mas, bmaj=1.056 mas, bpa=-40 degrees ! Estimated noise=2.52193 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.682456 Jy ! Component: 100 - total flux cleaned = 0.958581 Jy ! Total flux subtracted in 100 components = 0.958581 Jy ! Clean residual min=-0.069557 max=0.216995 Jy/beam ! Clean residual mean=0.000131 rms=0.019969 Jy/beam ! Combined flux in latest and established models = 0.958581 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.958581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.477600Jy sigma=2.451048 ! Fit after self-cal, rms=0.475363Jy sigma=2.435970 ! Inverting map ! Added new window around map position (-0.6, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.217039 Jy ! Component: 100 - total flux cleaned = 0.338511 Jy ! Total flux subtracted in 100 components = 0.338511 Jy ! Clean residual min=-0.040229 max=0.073480 Jy/beam ! Clean residual mean=0.000073 rms=0.011210 Jy/beam ! Combined flux in latest and established models = 1.29709 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 1.29709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.269237Jy sigma=1.408896 ! Fit after self-cal, rms=0.259525Jy sigma=1.327603 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0935416 Jy ! Component: 100 - total flux cleaned = 0.150566 Jy ! Total flux subtracted in 100 components = 0.150566 Jy ! Clean residual min=-0.029115 max=0.038673 Jy/beam ! Clean residual mean=0.000048 rms=0.007378 Jy/beam ! Combined flux in latest and established models = 1.44766 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 28 components and 1.44766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.183625Jy sigma=0.975576 ! Fit after self-cal, rms=0.181479Jy sigma=0.954845 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.084 mas, bmaj=1.259 mas, bpa=-43 degrees ! Estimated noise=1.81979 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0708672 Jy ! Component: 100 - total flux cleaned = 0.112831 Jy ! Component: 150 - total flux cleaned = 0.140808 Jy ! Component: 200 - total flux cleaned = 0.160436 Jy ! Total flux subtracted in 200 components = 0.160436 Jy ! Clean residual min=-0.030495 max=0.039758 Jy/beam ! Clean residual mean=0.000107 rms=0.007764 Jy/beam ! Combined flux in latest and established models = 1.60809 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 49 components and 1.60809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136822Jy sigma=0.773530 ! Fit after self-cal, rms=0.135284Jy sigma=0.760284 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.084 x 1.259 at -43 degrees (North through East) ! Clean map min=-0.027611 max=0.95054 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.02 KP 1.05 ! LA 0.98 MK 1.04 NL 1.14 OV 0.92 ! PT 0.90 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.02 KP 1.04 ! LA 0.99 MK 1.04 NL 1.14 OV 0.92 ! PT 0.90 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.01 KP 1.06 ! LA 0.97 MK 1.02 NL 1.14 OV 0.91 ! PT 0.89 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.01 KP 1.06 ! LA 0.99 MK 1.02 NL 1.14 OV 0.92 ! PT 0.89 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.00 KP 1.06 ! LA 0.98 MK 1.00 NL 1.15 OV 0.93 ! PT 0.92 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.00 KP 1.05 ! LA 0.97 MK 1.03 NL 1.15 OV 0.92 ! PT 0.90 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.01 KP 1.06 ! LA 0.99 MK 1.02 NL 1.15 OV 0.92 ! PT 0.90 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.01 KP 1.06 ! LA 0.98 MK 1.02 NL 1.14 OV 0.91 ! PT 0.90 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.01 KP 1.06 ! LA 0.98 MK 1.03 NL 1.15 OV 0.92 ! PT 0.90 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 1.01 KP 1.06 ! LA 0.98 MK 1.01 NL 1.16 OV 0.93 ! PT 0.91 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.02 KP 1.05 ! LA 0.99 MK 1.02 NL 1.14 OV 0.93 ! PT 0.89 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.03 KP 1.08 ! LA 0.98 MK 0.99 NL 1.14 OV 0.93 ! PT 0.90 ! ! ! Fit before self-cal, rms=0.135284Jy sigma=0.760284 ! Fit after self-cal, rms=0.073035Jy sigma=0.452089 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.09 mas, bmaj=1.287 mas, bpa=-41.59 degrees ! Estimated noise=1.82597 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00332877 Jy ! Component: 100 - total flux cleaned = -0.00532016 Jy ! Component: 150 - total flux cleaned = -0.00635844 Jy ! Component: 200 - total flux cleaned = -0.00739971 Jy ! Total flux subtracted in 200 components = -0.00739971 Jy ! Clean residual min=-0.011168 max=0.010588 Jy/beam ! Clean residual mean=0.000026 rms=0.002341 Jy/beam ! Combined flux in latest and established models = 1.60069 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 55 components and 1.60069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070395Jy sigma=0.436063 ! Fit after self-cal, rms=0.070251Jy sigma=0.432885 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070251Jy sigma=0.432885 ! Fit after self-cal, rms=0.068885Jy sigma=0.423404 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.089 mas, bmaj=1.293 mas, bpa=-40.67 degrees ! Estimated noise=1.82697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00237928 Jy ! Component: 100 - total flux cleaned = -0.00262404 Jy ! Component: 150 - total flux cleaned = -0.00282904 Jy ! Component: 200 - total flux cleaned = -0.00356189 Jy ! Total flux subtracted in 200 components = -0.00356189 Jy ! Clean residual min=-0.010419 max=0.010094 Jy/beam ! Clean residual mean=0.000027 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 1.59713 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 1.59713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067463Jy sigma=0.414921 ! Fit after self-cal, rms=0.067423Jy sigma=0.412992 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000549547 Jy ! Component: 100 - total flux cleaned = -0.000514002 Jy ! Component: 150 - total flux cleaned = -0.000765701 Jy ! Component: 200 - total flux cleaned = -0.000978696 Jy ! Total flux subtracted in 200 components = -0.000978696 Jy ! Clean residual min=-0.009267 max=0.009930 Jy/beam ! Clean residual mean=0.000028 rms=0.001877 Jy/beam ! Combined flux in latest and established models = 1.59615 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 1.59615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066682Jy sigma=0.409064 ! Fit after self-cal, rms=0.066676Jy sigma=0.407698 ! Inverting map ! Added new window around map position (-1.6, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00771251 Jy ! Component: 100 - total flux cleaned = 0.011261 Jy ! Component: 150 - total flux cleaned = 0.0137746 Jy ! Component: 200 - total flux cleaned = 0.0159139 Jy ! Total flux subtracted in 200 components = 0.0159139 Jy ! Clean residual min=-0.008233 max=0.006765 Jy/beam ! Clean residual mean=0.000012 rms=0.001651 Jy/beam ! Combined flux in latest and established models = 1.61207 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 1.61207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065060Jy sigma=0.399134 ! Fit after self-cal, rms=0.064981Jy sigma=0.398605 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064981Jy sigma=0.398605 ! Fit after self-cal, rms=0.064632Jy sigma=0.397197 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.089 mas, bmaj=1.296 mas, bpa=-40.38 degrees ! Estimated noise=1.82613 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143858 Jy ! Component: 100 - total flux cleaned = 6.57511e-05 Jy ! Component: 150 - total flux cleaned = 0.00122971 Jy ! Component: 200 - total flux cleaned = 0.00179665 Jy ! Total flux subtracted in 200 components = 0.00179665 Jy ! Clean residual min=-0.007747 max=0.006279 Jy/beam ! Clean residual mean=0.000012 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 1.61386 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 84 components and 1.61387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063965Jy sigma=0.393670 ! Fit after self-cal, rms=0.063974Jy sigma=0.393252 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000492393 Jy ! Component: 100 - total flux cleaned = 0.000166319 Jy ! Component: 150 - total flux cleaned = 0.000456719 Jy ! Component: 200 - total flux cleaned = 0.000723498 Jy ! Total flux subtracted in 200 components = 0.000723498 Jy ! Clean residual min=-0.007185 max=0.006245 Jy/beam ! Clean residual mean=0.000011 rms=0.001462 Jy/beam ! Combined flux in latest and established models = 1.61459 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 1.61459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063627Jy sigma=0.391401 ! Fit after self-cal, rms=0.063642Jy sigma=0.391044 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063642Jy sigma=0.391044 ! Fit after self-cal, rms=0.063557Jy sigma=0.390556 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.174 mas, bmaj=2.474 mas, bpa=-85.4 degrees ! Estimated noise=2.60017 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00394212 Jy ! Component: 100 - total flux cleaned = -0.00290525 Jy ! Component: 150 - total flux cleaned = -0.00222169 Jy ! Component: 200 - total flux cleaned = -0.00189515 Jy ! Total flux subtracted in 200 components = -0.00189515 Jy ! Clean residual min=-0.007816 max=0.008571 Jy/beam ! Clean residual mean=0.000025 rms=0.001958 Jy/beam ! Combined flux in latest and established models = 1.61269 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 93 components and 1.61269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063303Jy sigma=0.390353 ! Fit after self-cal, rms=0.063288Jy sigma=0.389481 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00638059 Jy ! Component: 100 - total flux cleaned = 0.00828648 Jy ! Component: 150 - total flux cleaned = 0.00914053 Jy ! Component: 200 - total flux cleaned = 0.00975414 Jy ! Total flux subtracted in 200 components = 0.00975414 Jy ! Clean residual min=-0.006569 max=0.005948 Jy/beam ! Clean residual mean=0.000012 rms=0.001619 Jy/beam ! Combined flux in latest and established models = 1.62245 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 125 components and 1.62245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062633Jy sigma=0.386901 ! Fit after self-cal, rms=0.062627Jy sigma=0.386546 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.09 mas, bmaj=1.298 mas, bpa=-40.22 degrees ! Estimated noise=1.82658 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.09 x 1.298 at -40.22 degrees (North through East) ! Clean map min=-0.0053086 max=0.9425 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062627Jy sigma=0.386546 ! Fit after self-cal, rms=0.059868Jy sigma=0.362374 ! Inverting map and beam ! Estimated beam: bmin=1.093 mas, bmaj=1.296 mas, bpa=-40.31 degrees ! Estimated noise=1.82551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000961387 Jy ! Component: 100 - total flux cleaned = 0.00122634 Jy ! Component: 150 - total flux cleaned = 0.00134997 Jy ! Component: 200 - total flux cleaned = 0.00168903 Jy ! Total flux subtracted in 200 components = 0.00168903 Jy ! Clean residual min=-0.004906 max=0.004795 Jy/beam ! Clean residual mean=0.000007 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 1.62414 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 147 components and 1.62414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059357Jy sigma=0.358874 ! Fit after self-cal, rms=0.059346Jy sigma=0.358748 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215836 Jy ! Component: 100 - total flux cleaned = 0.000375356 Jy ! Component: 150 - total flux cleaned = 0.000554477 Jy ! Component: 200 - total flux cleaned = 0.000637464 Jy ! Total flux subtracted in 200 components = 0.000637464 Jy ! Clean residual min=-0.004442 max=0.004576 Jy/beam ! Clean residual mean=0.000006 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 1.62477 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 153 components and 1.62477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059092Jy sigma=0.357035 ! Fit after self-cal, rms=0.059090Jy sigma=0.356943 ! Inverting map ! Added new window around map position (2.2, 20.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00291867 Jy ! Component: 100 - total flux cleaned = 0.00343115 Jy ! Component: 150 - total flux cleaned = 0.00324341 Jy ! Component: 200 - total flux cleaned = 0.00288677 Jy ! Total flux subtracted in 200 components = 0.00288677 Jy ! Clean residual min=-0.003807 max=0.003761 Jy/beam ! Clean residual mean=0.000004 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 1.62766 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 173 components and 1.62766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058580Jy sigma=0.353938 ! Fit after self-cal, rms=0.058569Jy sigma=0.353771 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058569Jy sigma=0.353771 ! Fit after self-cal, rms=0.058456Jy sigma=0.353543 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8687 mas, bmaj=1.077 mas, bpa=-38.49 degrees ! Estimated noise=2.51261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.702318 Jy ! Component: 100 - total flux cleaned = 1.01295 Jy ! Component: 150 - total flux cleaned = 1.19531 Jy ! Component: 200 - total flux cleaned = 1.30778 Jy ! Total flux subtracted in 200 components = 1.30778 Jy ! Clean residual min=-0.021218 max=0.058464 Jy/beam ! Clean residual mean=0.000061 rms=0.006395 Jy/beam ! Combined flux in latest and established models = 1.30778 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.30778 Jy ! Inverting map and beam ! Estimated beam: bmin=1.092 mas, bmaj=1.297 mas, bpa=-40.22 degrees ! Estimated noise=1.82424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103539 Jy ! Component: 100 - total flux cleaned = 0.159962 Jy ! Component: 150 - total flux cleaned = 0.195128 Jy ! Component: 200 - total flux cleaned = 0.218252 Jy ! Total flux subtracted in 200 components = 0.218252 Jy ! Clean residual min=-0.007505 max=0.017159 Jy/beam ! Clean residual mean=0.000071 rms=0.002340 Jy/beam ! Combined flux in latest and established models = 1.52604 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 48 components and 1.52604 Jy ! Inverting map ! Added new window around map position (-0.6, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174203 Jy ! Component: 100 - total flux cleaned = 0.0295563 Jy ! Component: 150 - total flux cleaned = 0.0389481 Jy ! Component: 200 - total flux cleaned = 0.0467074 Jy ! Total flux subtracted in 200 components = 0.0467074 Jy ! Clean residual min=-0.005085 max=0.006171 Jy/beam ! Clean residual mean=0.000042 rms=0.001419 Jy/beam ! Combined flux in latest and established models = 1.57274 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 72 components and 1.57274 Jy ! Inverting map ! Added new window around map position (-4.8, -24.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00696879 Jy ! Component: 100 - total flux cleaned = 0.0128827 Jy ! Component: 150 - total flux cleaned = 0.0180857 Jy ! Component: 200 - total flux cleaned = 0.0225193 Jy ! Total flux subtracted in 200 components = 0.0225193 Jy ! Clean residual min=-0.004439 max=0.004629 Jy/beam ! Clean residual mean=0.000026 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 1.59526 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 104 components and 1.59526 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.175 mas, bmaj=2.474 mas, bpa=-85.72 degrees ! Estimated noise=2.59339 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00733759 Jy ! Component: 100 - total flux cleaned = 0.0129338 Jy ! Component: 150 - total flux cleaned = 0.0174604 Jy ! Component: 200 - total flux cleaned = 0.0210791 Jy ! Total flux subtracted in 200 components = 0.0210791 Jy ! Clean residual min=-0.004565 max=0.004515 Jy/beam ! Clean residual mean=0.000029 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 1.61634 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255029 Jy ! Component: 100 - total flux cleaned = 0.00432306 Jy ! Component: 150 - total flux cleaned = 0.00560065 Jy ! Component: 200 - total flux cleaned = 0.00648492 Jy ! Total flux subtracted in 200 components = 0.00648492 Jy ! Clean residual min=-0.004101 max=0.004251 Jy/beam ! Clean residual mean=0.000017 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 1.62283 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 190 components and 1.62283 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.092 mas, bmaj=1.297 mas, bpa=-40.22 degrees ! Estimated noise=1.82424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.74058e-05 Jy ! Component: 100 - total flux cleaned = 0.000403007 Jy ! Component: 150 - total flux cleaned = 0.00106726 Jy ! Component: 200 - total flux cleaned = 0.00167119 Jy ! Total flux subtracted in 200 components = 0.00167119 Jy ! Clean residual min=-0.003733 max=0.003674 Jy/beam ! Clean residual mean=0.000005 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 1.6245 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 208 components and 1.6245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058156Jy sigma=0.352065 ! Fit after self-cal, rms=0.058064Jy sigma=0.351268 wmodel J1642+6856_X_a_map.mod ! Writing 208 model components to file: J1642+6856_X_a_map.mod wobs J1642+6856_X_a_uvs.fits ! Writing UV FITS file: J1642+6856_X_a_uvs.fits wwins J1642+6856_X_a_map.win ! wwins: Wrote 7 windows to J1642+6856_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000649324 Jy ! Component: 100 - total flux cleaned = -0.00113557 Jy ! Component: 150 - total flux cleaned = -0.0013658 Jy ! Component: 200 - total flux cleaned = -0.00152967 Jy ! Component: 250 - total flux cleaned = -0.0015813 Jy ! Component: 300 - total flux cleaned = -0.00178599 Jy ! Component: 350 - total flux cleaned = -0.00198502 Jy ! Component: 400 - total flux cleaned = -0.0021785 Jy ! Component: 450 - total flux cleaned = -0.00232 Jy ! Component: 500 - total flux cleaned = -0.00241135 Jy ! Component: 550 - total flux cleaned = -0.00254475 Jy ! Component: 600 - total flux cleaned = -0.00254445 Jy ! Component: 650 - total flux cleaned = -0.00258778 Jy ! Component: 700 - total flux cleaned = -0.00271433 Jy ! Component: 750 - total flux cleaned = -0.002756 Jy ! Component: 800 - total flux cleaned = -0.00287792 Jy ! Component: 850 - total flux cleaned = -0.00291735 Jy ! Component: 900 - total flux cleaned = -0.00287828 Jy ! Component: 950 - total flux cleaned = -0.00303165 Jy ! Component: 1000 - total flux cleaned = -0.00310722 Jy ! Component: 1050 - total flux cleaned = -0.00321838 Jy ! Component: 1100 - total flux cleaned = -0.00321812 Jy ! Component: 1150 - total flux cleaned = -0.00321851 Jy ! Component: 1200 - total flux cleaned = -0.00321824 Jy ! Component: 1250 - total flux cleaned = -0.00307837 Jy ! Component: 1300 - total flux cleaned = -0.00304315 Jy ! Component: 1350 - total flux cleaned = -0.00297443 Jy ! Component: 1400 - total flux cleaned = -0.00287409 Jy ! Component: 1450 - total flux cleaned = -0.00297295 Jy ! Component: 1500 - total flux cleaned = -0.00297285 Jy ! Component: 1550 - total flux cleaned = -0.00306945 Jy ! Component: 1600 - total flux cleaned = -0.00300617 Jy ! Component: 1650 - total flux cleaned = -0.0031319 Jy ! Component: 1700 - total flux cleaned = -0.00310049 Jy ! Component: 1750 - total flux cleaned = -0.00303931 Jy ! Component: 1800 - total flux cleaned = -0.00309982 Jy ! Component: 1850 - total flux cleaned = -0.0030697 Jy ! Component: 1900 - total flux cleaned = -0.00309942 Jy ! Component: 1950 - total flux cleaned = -0.00292396 Jy ! Component: 2000 - total flux cleaned = -0.00295355 Jy ! Component: 2050 - total flux cleaned = -0.00301026 Jy ! Component: 2100 - total flux cleaned = -0.00295332 Jy ! Component: 2150 - total flux cleaned = -0.00289723 Jy ! Component: 2200 - total flux cleaned = -0.00278703 Jy ! Component: 2250 - total flux cleaned = -0.00286917 Jy ! Component: 2300 - total flux cleaned = -0.0027609 Jy ! Component: 2350 - total flux cleaned = -0.00270761 Jy ! Component: 2400 - total flux cleaned = -0.00265453 Jy ! Component: 2450 - total flux cleaned = -0.00260248 Jy ! Component: 2500 - total flux cleaned = -0.00260224 Jy ! Component: 2550 - total flux cleaned = -0.0025512 Jy ! Component: 2600 - total flux cleaned = -0.00250051 Jy ! Component: 2650 - total flux cleaned = -0.00244998 Jy ! Component: 2700 - total flux cleaned = -0.0024006 Jy ! Component: 2750 - total flux cleaned = -0.00254892 Jy ! Component: 2800 - total flux cleaned = -0.00257325 Jy ! Component: 2850 - total flux cleaned = -0.00252458 Jy ! Component: 2900 - total flux cleaned = -0.00259659 Jy ! Component: 2950 - total flux cleaned = -0.00262023 Jy ! Component: 3000 - total flux cleaned = -0.00262027 Jy ! Component: 3050 - total flux cleaned = -0.00262063 Jy ! Component: 3100 - total flux cleaned = -0.00264415 Jy ! Component: 3150 - total flux cleaned = -0.00271283 Jy ! Component: 3200 - total flux cleaned = -0.00273543 Jy ! Component: 3250 - total flux cleaned = -0.00275799 Jy ! Component: 3300 - total flux cleaned = -0.00280246 Jy ! Component: 3350 - total flux cleaned = -0.00286886 Jy ! Component: 3400 - total flux cleaned = -0.00289081 Jy ! Component: 3450 - total flux cleaned = -0.00297789 Jy ! Component: 3500 - total flux cleaned = -0.0030426 Jy ! Component: 3550 - total flux cleaned = -0.00302147 Jy ! Component: 3600 - total flux cleaned = -0.00310616 Jy ! Component: 3650 - total flux cleaned = -0.00319048 Jy ! Component: 3700 - total flux cleaned = -0.00329495 Jy ! Component: 3750 - total flux cleaned = -0.00327401 Jy ! Component: 3800 - total flux cleaned = -0.00327414 Jy ! Component: 3850 - total flux cleaned = -0.00333566 Jy ! Component: 3900 - total flux cleaned = -0.00337608 Jy ! Component: 3950 - total flux cleaned = -0.00331568 Jy ! Component: 4000 - total flux cleaned = -0.00347552 Jy ! Component: 4050 - total flux cleaned = -0.00347557 Jy ! Total flux subtracted in 4096 components = -0.00343626 Jy ! Clean residual min=-0.001281 max=0.001060 Jy/beam ! Clean residual mean=0.000002 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 1.62106 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 490 components and 1.62106 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1642+6856_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.092 x 1.297 at -40.22 degrees (North through East) ! Clean map min=-0.0025336 max=0.94512 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1642+6856_X_a_map.fits wmodel /image_prod/ug002_uva//J1642+6856_X_a_map.mod ! Writing 490 model components to file: /image_prod/ug002_uva//J1642+6856_X_a_map.mod wobs /image_prod/ug002_uva//J1642+6856_X_a_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1642+6856_X_a_uvs.fits wwins /image_prod/ug002_uva//J1642+6856_X_a_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uva//J1642+6856_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.945117 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000335672 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.106549 0.106549 0.213099 0.426197 0.852394 1.70479 3.40958 6.81915 13.6383 27.2766 54.5532 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.945 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2815.6 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1642+6856_X_a_dfm.log closed on Thu Mar 5 02:53:05 2020