! Started logfile: /image_prod/ug002_uva//J1640+1220_X_dfm.log on Thu Mar 5 02:51:59 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1640+1220_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1640+1220_X_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.960988 visibilities/baseline/integration-bin. ! Found source: J1640+1220 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 23352 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1640+1220_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.045822Jy sigma=8.911573 ! Fit after self-cal, rms=0.735280Jy sigma=6.288565 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7045 mas, bmaj=1.642 mas, bpa=-3.646 degrees ! Estimated noise=0.912471 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.184074 Jy ! Component: 100 - total flux cleaned = 0.249265 Jy ! Total flux subtracted in 100 components = 0.249265 Jy ! Clean residual min=-0.010363 max=0.033868 Jy/beam ! Clean residual mean=0.000053 rms=0.003305 Jy/beam ! Combined flux in latest and established models = 0.249266 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.249266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122999Jy sigma=0.982563 ! Fit after self-cal, rms=0.122967Jy sigma=0.982215 ! Inverting map ! Added new window around map position (1.2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0390095 Jy ! Component: 100 - total flux cleaned = 0.0658427 Jy ! Total flux subtracted in 100 components = 0.0658427 Jy ! Clean residual min=-0.008892 max=0.020934 Jy/beam ! Clean residual mean=0.000038 rms=0.002380 Jy/beam ! Combined flux in latest and established models = 0.315108 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 0.315108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096727Jy sigma=0.766667 ! Fit after self-cal, rms=0.096026Jy sigma=0.760502 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213161 Jy ! Component: 100 - total flux cleaned = 0.0363578 Jy ! Total flux subtracted in 100 components = 0.0363578 Jy ! Clean residual min=-0.007280 max=0.017092 Jy/beam ! Clean residual mean=0.000030 rms=0.001993 Jy/beam ! Combined flux in latest and established models = 0.351466 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.351466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085565Jy sigma=0.677279 ! Fit after self-cal, rms=0.085183Jy sigma=0.673987 ! Inverting map ! Added new window around map position (-1.4, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161272 Jy ! Component: 100 - total flux cleaned = 0.0279198 Jy ! Total flux subtracted in 100 components = 0.0279198 Jy ! Clean residual min=-0.006304 max=0.012893 Jy/beam ! Clean residual mean=0.000024 rms=0.001727 Jy/beam ! Combined flux in latest and established models = 0.379386 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 40 components and 0.379386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078533Jy sigma=0.620904 ! Fit after self-cal, rms=0.078469Jy sigma=0.620381 ! Inverting map ! Added new window around map position (-2.8, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124977 Jy ! Component: 100 - total flux cleaned = 0.021502 Jy ! Total flux subtracted in 100 components = 0.021502 Jy ! Clean residual min=-0.005718 max=0.009950 Jy/beam ! Clean residual mean=0.000021 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.400888 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 66 components and 0.400888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074232Jy sigma=0.587236 ! Fit after self-cal, rms=0.074147Jy sigma=0.586022 ! Inverting map ! Added new window around map position (6.8, -6.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00977934 Jy ! Component: 100 - total flux cleaned = 0.0172455 Jy ! Total flux subtracted in 100 components = 0.0172455 Jy ! Clean residual min=-0.005747 max=0.007308 Jy/beam ! Clean residual mean=0.000019 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.418134 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 83 components and 0.418133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071445Jy sigma=0.564670 ! Fit after self-cal, rms=0.071399Jy sigma=0.564189 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8743 mas, bmaj=1.939 mas, bpa=-4.14 degrees ! Estimated noise=0.551416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132861 Jy ! Component: 100 - total flux cleaned = 0.023701 Jy ! Component: 150 - total flux cleaned = 0.0321944 Jy ! Component: 200 - total flux cleaned = 0.0391708 Jy ! Total flux subtracted in 200 components = 0.0391708 Jy ! Clean residual min=-0.007782 max=0.012419 Jy/beam ! Clean residual mean=0.000024 rms=0.001885 Jy/beam ! Combined flux in latest and established models = 0.457304 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 113 components and 0.457304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067055Jy sigma=0.532761 ! Fit after self-cal, rms=0.067011Jy sigma=0.532114 ! Inverting map ! Added new window around map position (-5.2, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125516 Jy ! Component: 100 - total flux cleaned = 0.0203913 Jy ! Component: 150 - total flux cleaned = 0.0268625 Jy ! Component: 200 - total flux cleaned = 0.0325684 Jy ! Total flux subtracted in 200 components = 0.0325684 Jy ! Clean residual min=-0.007009 max=0.005864 Jy/beam ! Clean residual mean=0.000022 rms=0.001509 Jy/beam ! Combined flux in latest and established models = 0.489873 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 154 components and 0.489873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063733Jy sigma=0.506686 ! Fit after self-cal, rms=0.063510Jy sigma=0.504797 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8743 x 1.939 at -4.14 degrees (North through East) ! Clean map min=-0.0067944 max=0.25519 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.94 KP 1.04 ! LA 0.95 MK 1.04 NL 1.08 OV 0.99 ! PT 0.88 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.96 KP 1.03 ! LA 0.95 MK 1.02 NL 1.07 OV 1.00 ! PT 0.87 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.95 KP 1.05 ! LA 0.97 MK 0.97 NL 1.07 OV 0.99 ! PT 0.89 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.94 KP 1.03 ! LA 0.97 MK 1.01 NL 1.07 OV 1.00 ! PT 0.87 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.97 KP 1.04 ! LA 0.97 MK 1.02 NL 1.07 OV 1.01 ! PT 0.88 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.98 KP 1.06 ! LA 0.97 MK 1.02 NL 1.07 OV 0.99 ! PT 0.90 SC 1.05 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.97 KP 1.05 ! LA 0.97 MK 1.02 NL 1.08 OV 1.01 ! PT 0.90 SC 1.11 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.96 KP 1.04 ! LA 0.98 MK 1.00 NL 1.07 OV 1.01 ! PT 0.88 SC 1.08 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.99 KP 1.07 ! LA 0.97 MK 1.01 NL 1.09 OV 1.01 ! PT 0.89 SC 1.07 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 1.00 KP 1.04 ! LA 0.98 MK 1.01 NL 1.09 OV 1.01 ! PT 0.88 SC 1.07 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.00 KP 1.08 ! LA 0.99 MK 1.06 NL 1.08 OV 1.03 ! PT 0.90 SC 1.05 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.03 KP 1.03 ! LA 0.99 MK 1.09 NL 1.08 OV 1.05 ! PT 0.88 SC 1.09 ! ! ! Fit before self-cal, rms=0.063510Jy sigma=0.504797 ! Fit after self-cal, rms=0.058457Jy sigma=0.464791 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8844 mas, bmaj=1.958 mas, bpa=-4.45 degrees ! Estimated noise=0.551747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00396913 Jy ! Component: 100 - total flux cleaned = 0.0054806 Jy ! Component: 150 - total flux cleaned = 0.0069028 Jy ! Component: 200 - total flux cleaned = 0.00809362 Jy ! Total flux subtracted in 200 components = 0.00809362 Jy ! Clean residual min=-0.002648 max=0.003275 Jy/beam ! Clean residual mean=0.000007 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.497966 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 180 components and 0.497966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057913Jy sigma=0.459890 ! Fit after self-cal, rms=0.057874Jy sigma=0.459511 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057874Jy sigma=0.459511 ! Fit after self-cal, rms=0.058406Jy sigma=0.452525 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8841 mas, bmaj=1.947 mas, bpa=-4.299 degrees ! Estimated noise=0.553443 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136056 Jy ! Component: 100 - total flux cleaned = 0.00188151 Jy ! Component: 150 - total flux cleaned = 0.00244506 Jy ! Component: 200 - total flux cleaned = 0.00285654 Jy ! Total flux subtracted in 200 components = 0.00285654 Jy ! Clean residual min=-0.001891 max=0.002243 Jy/beam ! Clean residual mean=0.000003 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.500823 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 198 components and 0.500823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058182Jy sigma=0.450539 ! Fit after self-cal, rms=0.058180Jy sigma=0.450416 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.2, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191635 Jy ! Component: 100 - total flux cleaned = 0.00276024 Jy ! Component: 150 - total flux cleaned = 0.00338841 Jy ! Component: 200 - total flux cleaned = 0.00369643 Jy ! Total flux subtracted in 200 components = 0.00369643 Jy ! Clean residual min=-0.001816 max=0.002049 Jy/beam ! Clean residual mean=0.000002 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.504519 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 221 components and 0.504519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058066Jy sigma=0.449431 ! Fit after self-cal, rms=0.058061Jy sigma=0.449388 ! Inverting map ! Added new window around map position (3.2, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000776181 Jy ! Component: 100 - total flux cleaned = 0.00105001 Jy ! Component: 150 - total flux cleaned = 0.00152239 Jy ! Component: 200 - total flux cleaned = 0.00176161 Jy ! Total flux subtracted in 200 components = 0.00176161 Jy ! Clean residual min=-0.001707 max=0.001724 Jy/beam ! Clean residual mean=0.000002 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.506281 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 234 components and 0.506281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057978Jy sigma=0.448646 ! Fit after self-cal, rms=0.057975Jy sigma=0.448622 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057975Jy sigma=0.448622 ! Fit after self-cal, rms=0.058176Jy sigma=0.448165 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8834 mas, bmaj=1.945 mas, bpa=-4.274 degrees ! Estimated noise=0.553252 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000867151 Jy ! Component: 100 - total flux cleaned = -0.000525903 Jy ! Component: 150 - total flux cleaned = -4.62695e-05 Jy ! Component: 200 - total flux cleaned = 0.000352236 Jy ! Total flux subtracted in 200 components = 0.000352236 Jy ! Clean residual min=-0.001656 max=0.001676 Jy/beam ! Clean residual mean=0.000002 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.506633 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 246 components and 0.506633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058097Jy sigma=0.447551 ! Fit after self-cal, rms=0.058097Jy sigma=0.447535 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257982 Jy ! Component: 100 - total flux cleaned = 0.000510015 Jy ! Component: 150 - total flux cleaned = 0.000749209 Jy ! Component: 200 - total flux cleaned = 0.00100906 Jy ! Total flux subtracted in 200 components = 0.00100906 Jy ! Clean residual min=-0.001601 max=0.001637 Jy/beam ! Clean residual mean=0.000002 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.507642 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 254 components and 0.507642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058059Jy sigma=0.447215 ! Fit after self-cal, rms=0.058058Jy sigma=0.447209 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058058Jy sigma=0.447209 ! Fit after self-cal, rms=0.058117Jy sigma=0.447076 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.098 mas, bmaj=2.943 mas, bpa=-2.21 degrees ! Estimated noise=0.712466 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000611478 Jy ! Component: 100 - total flux cleaned = 0.00111897 Jy ! Component: 150 - total flux cleaned = 0.00151248 Jy ! Component: 200 - total flux cleaned = 0.00179855 Jy ! Total flux subtracted in 200 components = 0.00179855 Jy ! Clean residual min=-0.002107 max=0.002279 Jy/beam ! Clean residual mean=0.000004 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.509441 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 277 components and 0.509441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058087Jy sigma=0.446835 ! Fit after self-cal, rms=0.058087Jy sigma=0.446820 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229254 Jy ! Component: 100 - total flux cleaned = 0.000450445 Jy ! Component: 150 - total flux cleaned = 0.000551966 Jy ! Component: 200 - total flux cleaned = 0.000671626 Jy ! Total flux subtracted in 200 components = 0.000671626 Jy ! Clean residual min=-0.002033 max=0.002239 Jy/beam ! Clean residual mean=0.000003 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.510113 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 287 components and 0.510113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058074Jy sigma=0.446739 ! Fit after self-cal, rms=0.058074Jy sigma=0.446733 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8827 mas, bmaj=1.943 mas, bpa=-4.246 degrees ! Estimated noise=0.5531 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8827 x 1.943 at -4.246 degrees (North through East) ! Clean map min=-0.0013657 max=0.25471 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7098 mas, bmaj=1.637 mas, bpa=-3.601 degrees ! Estimated noise=0.924065 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.185574 Jy ! Component: 100 - total flux cleaned = 0.251229 Jy ! Component: 150 - total flux cleaned = 0.291141 Jy ! Component: 200 - total flux cleaned = 0.31792 Jy ! Total flux subtracted in 200 components = 0.31792 Jy ! Clean residual min=-0.006482 max=0.014899 Jy/beam ! Clean residual mean=0.000030 rms=0.001935 Jy/beam ! Combined flux in latest and established models = 0.31792 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.31792 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8827 mas, bmaj=1.943 mas, bpa=-4.246 degrees ! Estimated noise=0.5531 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0334535 Jy ! Component: 100 - total flux cleaned = 0.0568266 Jy ! Component: 150 - total flux cleaned = 0.0750317 Jy ! Component: 200 - total flux cleaned = 0.0898563 Jy ! Total flux subtracted in 200 components = 0.0898563 Jy ! Clean residual min=-0.005504 max=0.009056 Jy/beam ! Clean residual mean=0.000022 rms=0.001709 Jy/beam ! Combined flux in latest and established models = 0.407776 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 61 components and 0.407776 Jy ! Inverting map ! Added new window around map position (-0.6, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122969 Jy ! Component: 100 - total flux cleaned = 0.0225863 Jy ! Component: 150 - total flux cleaned = 0.0312953 Jy ! Component: 200 - total flux cleaned = 0.0387628 Jy ! Total flux subtracted in 200 components = 0.0387628 Jy ! Clean residual min=-0.003590 max=0.004675 Jy/beam ! Clean residual mean=0.000014 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.446539 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 124 components and 0.446539 Jy ! Inverting map ! Added new window around map position (-3.8, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00647331 Jy ! Component: 100 - total flux cleaned = 0.0121213 Jy ! Component: 150 - total flux cleaned = 0.0170861 Jy ! Component: 200 - total flux cleaned = 0.0214885 Jy ! Total flux subtracted in 200 components = 0.0214885 Jy ! Clean residual min=-0.002494 max=0.002853 Jy/beam ! Clean residual mean=0.000009 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.468027 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 192 components and 0.468027 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.098 mas, bmaj=2.943 mas, bpa=-2.21 degrees ! Estimated noise=0.712466 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00798277 Jy ! Component: 100 - total flux cleaned = 0.0141955 Jy ! Component: 150 - total flux cleaned = 0.0192121 Jy ! Component: 200 - total flux cleaned = 0.023312 Jy ! Total flux subtracted in 200 components = 0.023312 Jy ! Clean residual min=-0.002769 max=0.002808 Jy/beam ! Clean residual mean=0.000012 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.491339 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00338008 Jy ! Component: 100 - total flux cleaned = 0.00618768 Jy ! Component: 150 - total flux cleaned = 0.00853382 Jy ! Component: 200 - total flux cleaned = 0.0105105 Jy ! Total flux subtracted in 200 components = 0.0105105 Jy ! Clean residual min=-0.002351 max=0.002161 Jy/beam ! Clean residual mean=0.000007 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.50185 Jy ! Adding 178 model components to the UV plane model. ! The established model now contains 338 components and 0.50185 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8827 mas, bmaj=1.943 mas, bpa=-4.246 degrees ! Estimated noise=0.5531 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103113 Jy ! Component: 100 - total flux cleaned = 0.0018486 Jy ! Component: 150 - total flux cleaned = 0.00256484 Jy ! Component: 200 - total flux cleaned = 0.00328832 Jy ! Total flux subtracted in 200 components = 0.00328832 Jy ! Clean residual min=-0.001454 max=0.001440 Jy/beam ! Clean residual mean=0.000002 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.505138 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 370 components and 0.505138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058028Jy sigma=0.446253 ! Fit after self-cal, rms=0.058013Jy sigma=0.446157 wmodel J1640+1220_X_map.mod ! Writing 370 model components to file: J1640+1220_X_map.mod wobs J1640+1220_X_uvs.fits ! Writing UV FITS file: J1640+1220_X_uvs.fits wwins J1640+1220_X_map.win ! wwins: Wrote 10 windows to J1640+1220_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269966 Jy ! Component: 100 - total flux cleaned = -0.00034619 Jy ! Component: 150 - total flux cleaned = -0.000443082 Jy ! Component: 200 - total flux cleaned = -0.000537446 Jy ! Component: 250 - total flux cleaned = -0.000537513 Jy ! Component: 300 - total flux cleaned = -0.000537847 Jy ! Component: 350 - total flux cleaned = -0.000494313 Jy ! Component: 400 - total flux cleaned = -0.000473378 Jy ! Component: 450 - total flux cleaned = -0.000494607 Jy ! Component: 500 - total flux cleaned = -0.000515248 Jy ! Component: 550 - total flux cleaned = -0.000515296 Jy ! Component: 600 - total flux cleaned = -0.000495784 Jy ! Component: 650 - total flux cleaned = -0.000495978 Jy ! Component: 700 - total flux cleaned = -0.000496256 Jy ! Component: 750 - total flux cleaned = -0.000496168 Jy ! Component: 800 - total flux cleaned = -0.000514899 Jy ! Component: 850 - total flux cleaned = -0.000440705 Jy ! Component: 900 - total flux cleaned = -0.000458866 Jy ! Component: 950 - total flux cleaned = -0.000404384 Jy ! Component: 1000 - total flux cleaned = -0.000422083 Jy ! Component: 1050 - total flux cleaned = -0.000334271 Jy ! Component: 1100 - total flux cleaned = -0.000299644 Jy ! Component: 1150 - total flux cleaned = -0.000316917 Jy ! Component: 1200 - total flux cleaned = -0.000283118 Jy ! Component: 1250 - total flux cleaned = -0.000283258 Jy ! Component: 1300 - total flux cleaned = -0.000266618 Jy ! Component: 1350 - total flux cleaned = -0.000282956 Jy ! Component: 1400 - total flux cleaned = -0.000266638 Jy ! Component: 1450 - total flux cleaned = -0.000218534 Jy ! Component: 1500 - total flux cleaned = -0.000186854 Jy ! Component: 1550 - total flux cleaned = -0.000171555 Jy ! Component: 1600 - total flux cleaned = -0.000187272 Jy ! Component: 1650 - total flux cleaned = -0.000202604 Jy ! Component: 1700 - total flux cleaned = -0.000202717 Jy ! Component: 1750 - total flux cleaned = -0.000187493 Jy ! Component: 1800 - total flux cleaned = -0.000187573 Jy ! Component: 1850 - total flux cleaned = -9.87641e-05 Jy ! Component: 1900 - total flux cleaned = -0.000142948 Jy ! Component: 1950 - total flux cleaned = -0.000142689 Jy ! Component: 2000 - total flux cleaned = -5.63761e-05 Jy ! Component: 2050 - total flux cleaned = 6.44831e-07 Jy ! Component: 2100 - total flux cleaned = -4.1832e-05 Jy ! Component: 2150 - total flux cleaned = -4.19117e-05 Jy ! Component: 2200 - total flux cleaned = -4.18134e-05 Jy ! Component: 2250 - total flux cleaned = -2.8232e-05 Jy ! Component: 2300 - total flux cleaned = 2.62518e-05 Jy ! Component: 2350 - total flux cleaned = -7.09182e-07 Jy ! Component: 2400 - total flux cleaned = 5.28297e-05 Jy ! Component: 2450 - total flux cleaned = 6.611e-05 Jy ! Component: 2500 - total flux cleaned = 7.90327e-05 Jy ! Component: 2550 - total flux cleaned = 9.20398e-05 Jy ! Component: 2600 - total flux cleaned = 7.91927e-05 Jy ! Component: 2650 - total flux cleaned = 0.000117832 Jy ! Component: 2700 - total flux cleaned = 0.000117844 Jy ! Component: 2750 - total flux cleaned = 7.99305e-05 Jy ! Component: 2800 - total flux cleaned = 0.000167476 Jy ! Component: 2850 - total flux cleaned = 0.000179903 Jy ! Component: 2900 - total flux cleaned = 0.000167515 Jy ! Component: 2950 - total flux cleaned = 0.000216216 Jy ! Component: 3000 - total flux cleaned = 0.000191948 Jy ! Component: 3050 - total flux cleaned = 0.000143714 Jy ! Component: 3100 - total flux cleaned = 0.000191709 Jy ! Component: 3150 - total flux cleaned = 0.000274979 Jy ! Component: 3200 - total flux cleaned = 0.000286726 Jy ! Component: 3250 - total flux cleaned = 0.00025159 Jy ! Component: 3300 - total flux cleaned = 0.000263246 Jy ! Component: 3350 - total flux cleaned = 0.00032108 Jy ! Component: 3400 - total flux cleaned = 0.000297973 Jy ! Component: 3450 - total flux cleaned = 0.000320892 Jy ! Component: 3500 - total flux cleaned = 0.000366401 Jy ! Component: 3550 - total flux cleaned = 0.000355184 Jy ! Component: 3600 - total flux cleaned = 0.000411261 Jy ! Component: 3650 - total flux cleaned = 0.000411231 Jy ! Component: 3700 - total flux cleaned = 0.000422269 Jy ! Component: 3750 - total flux cleaned = 0.000356306 Jy ! Component: 3800 - total flux cleaned = 0.000356456 Jy ! Component: 3850 - total flux cleaned = 0.000378239 Jy ! Component: 3900 - total flux cleaned = 0.000399798 Jy ! Component: 3950 - total flux cleaned = 0.000410592 Jy ! Component: 4000 - total flux cleaned = 0.000378634 Jy ! Component: 4050 - total flux cleaned = 0.000389223 Jy ! Total flux subtracted in 4096 components = 0.000431275 Jy ! Clean residual min=-0.000576 max=0.000614 Jy/beam ! Clean residual mean=0.000001 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.505569 Jy keep ! Adding 353 model components to the UV plane model. ! The established model now contains 723 components and 0.505569 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1640+1220_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8827 x 1.943 at -4.246 degrees (North through East) ! Clean map min=-0.0009524 max=0.25669 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1640+1220_X_map.fits wmodel /image_prod/ug002_uva//J1640+1220_X_map.mod ! Writing 723 model components to file: /image_prod/ug002_uva//J1640+1220_X_map.mod wobs /image_prod/ug002_uva//J1640+1220_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1640+1220_X_uvs.fits wwins /image_prod/ug002_uva//J1640+1220_X_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J1640+1220_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.25669 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000184983 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.216194 0.216194 0.432388 0.864777 1.72955 3.45911 6.91821 13.8364 27.6729 55.3457 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.256 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1387.64 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1640+1220_X_dfm.log closed on Thu Mar 5 02:52:05 2020