! Started logfile: /image_prod/ug002_uva//J1640+1144_X_dfm.log on Thu Mar 5 02:51:47 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1640+1144_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1640+1144_X_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.981111 visibilities/baseline/integration-bin. ! Found source: J1640+1144 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 31788 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1640+1144_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.009132Jy sigma=9.225793 ! Fit after self-cal, rms=0.891748Jy sigma=8.142840 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7092 mas, bmaj=1.663 mas, bpa=-4.527 degrees ! Estimated noise=0.827104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0796325 Jy ! Component: 100 - total flux cleaned = 0.100461 Jy ! Total flux subtracted in 100 components = 0.100461 Jy ! Clean residual min=-0.003824 max=0.009241 Jy/beam ! Clean residual mean=0.000008 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.100461 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.100461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062020Jy sigma=0.528172 ! Fit after self-cal, rms=0.061928Jy sigma=0.527399 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010563 Jy ! Component: 100 - total flux cleaned = 0.0161768 Jy ! Total flux subtracted in 100 components = 0.0161768 Jy ! Clean residual min=-0.003515 max=0.006210 Jy/beam ! Clean residual mean=0.000004 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.116638 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 9 components and 0.116638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059235Jy sigma=0.500933 ! Fit after self-cal, rms=0.059220Jy sigma=0.500700 ! Inverting map ! Added new window around map position (-1.2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00638404 Jy ! Component: 100 - total flux cleaned = 0.00979735 Jy ! Total flux subtracted in 100 components = 0.00979735 Jy ! Clean residual min=-0.003434 max=0.005028 Jy/beam ! Clean residual mean=0.000003 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.126435 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.126435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058208Jy sigma=0.490632 ! Fit after self-cal, rms=0.058123Jy sigma=0.489764 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8973 mas, bmaj=1.976 mas, bpa=-4.17 degrees ! Estimated noise=0.441686 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00579305 Jy ! Component: 100 - total flux cleaned = 0.00921876 Jy ! Component: 150 - total flux cleaned = 0.011695 Jy ! Component: 200 - total flux cleaned = 0.0135368 Jy ! Total flux subtracted in 200 components = 0.0135368 Jy ! Clean residual min=-0.002869 max=0.004427 Jy/beam ! Clean residual mean=0.000006 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.139972 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 44 components and 0.139972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057487Jy sigma=0.483407 ! Fit after self-cal, rms=0.057433Jy sigma=0.482830 ! Inverting map ! Added new window around map position (2, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241492 Jy ! Component: 100 - total flux cleaned = 0.00392453 Jy ! Component: 150 - total flux cleaned = 0.00530149 Jy ! Component: 200 - total flux cleaned = 0.00616009 Jy ! Total flux subtracted in 200 components = 0.00616009 Jy ! Clean residual min=-0.002705 max=0.002847 Jy/beam ! Clean residual mean=0.000005 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.146132 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 64 components and 0.146132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057169Jy sigma=0.480378 ! Fit after self-cal, rms=0.057159Jy sigma=0.480310 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8973 x 1.976 at -4.17 degrees (North through East) ! Clean map min=-0.0024674 max=0.10667 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 0.98 KP 1.06 ! LA 0.94 MK 1.02 NL 1.07 OV 1.01 ! PT 0.91 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 HN 0.98 KP 1.07 ! LA 0.97 MK 1.01 NL 1.09 OV 0.99 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 0.95 KP 1.07 ! LA 0.99 MK 0.97 NL 1.07 OV 1.01 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.01 HN 0.93 KP 1.05 ! LA 1.02 MK 1.00 NL 1.10 OV 1.02 ! PT 0.89 SC 1.07 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.95 KP 1.07 ! LA 1.01 MK 1.03 NL 1.05 OV 1.01 ! PT 0.91 SC 1.06 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.95 KP 1.04 ! LA 1.00 MK 1.04 NL 1.09 OV 1.02 ! PT 0.90 SC 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.98 KP 1.08 ! LA 0.98 MK 1.00 NL 1.12 OV 0.98 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.93 KP 1.06 ! LA 0.99 MK 1.00 NL 1.07 OV 1.03 ! PT 0.91 SC 1.10 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.95 KP 1.06 ! LA 0.97 MK 1.02 NL 1.05 OV 1.01 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 0.98 KP 1.05 ! LA 1.00 MK 1.01 NL 1.09 OV 1.01 ! PT 0.91 SC 1.05 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.99 KP 1.08 ! LA 0.99 MK 1.01 NL 1.07 OV 1.02 ! PT 0.93 SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 0.99 KP 1.05 ! LA 1.00 MK 1.02 NL 1.07 OV 1.02 ! PT 0.90 SC 1.08 ! ! ! Fit before self-cal, rms=0.057159Jy sigma=0.480310 ! Fit after self-cal, rms=0.056197Jy sigma=0.474532 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9036 mas, bmaj=1.982 mas, bpa=-4.418 degrees ! Estimated noise=0.441917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114399 Jy ! Component: 100 - total flux cleaned = -0.00143759 Jy ! Component: 150 - total flux cleaned = -0.00155597 Jy ! Component: 200 - total flux cleaned = -0.00166517 Jy ! Total flux subtracted in 200 components = -0.00166517 Jy ! Clean residual min=-0.001374 max=0.001649 Jy/beam ! Clean residual mean=0.000002 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.144467 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.144467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056121Jy sigma=0.473880 ! Fit after self-cal, rms=0.056119Jy sigma=0.473804 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056119Jy sigma=0.473804 ! Fit after self-cal, rms=0.057788Jy sigma=0.470483 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9046 mas, bmaj=1.966 mas, bpa=-4.274 degrees ! Estimated noise=0.44313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000984607 Jy ! Component: 100 - total flux cleaned = -0.00107375 Jy ! Component: 150 - total flux cleaned = -0.00114973 Jy ! Component: 200 - total flux cleaned = -0.00123809 Jy ! Total flux subtracted in 200 components = -0.00123809 Jy ! Clean residual min=-0.001009 max=0.001254 Jy/beam ! Clean residual mean=0.000002 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.143229 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 97 components and 0.143229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057758Jy sigma=0.470209 ! Fit after self-cal, rms=0.057789Jy sigma=0.470160 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.4, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122336 Jy ! Component: 100 - total flux cleaned = 0.00179821 Jy ! Component: 150 - total flux cleaned = 0.0019564 Jy ! Component: 200 - total flux cleaned = 0.0020361 Jy ! Total flux subtracted in 200 components = 0.0020361 Jy ! Clean residual min=-0.000883 max=0.001173 Jy/beam ! Clean residual mean=0.000002 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.145265 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 119 components and 0.145265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057760Jy sigma=0.469853 ! Fit after self-cal, rms=0.057756Jy sigma=0.469829 ! Inverting map ! Added new window around map position (-10.6, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113991 Jy ! Component: 100 - total flux cleaned = 0.0017821 Jy ! Component: 150 - total flux cleaned = 0.00228226 Jy ! Component: 200 - total flux cleaned = 0.00251632 Jy ! Total flux subtracted in 200 components = 0.00251632 Jy ! Clean residual min=-0.000913 max=0.001028 Jy/beam ! Clean residual mean=0.000001 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.147781 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 142 components and 0.147781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057731Jy sigma=0.469571 ! Fit after self-cal, rms=0.057729Jy sigma=0.469552 ! Inverting map ! Added new window around map position (23, 37.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000688267 Jy ! Component: 100 - total flux cleaned = 0.000716704 Jy ! Component: 150 - total flux cleaned = 0.000802975 Jy ! Component: 200 - total flux cleaned = 0.000918138 Jy ! Total flux subtracted in 200 components = 0.000918138 Jy ! Clean residual min=-0.000845 max=0.000914 Jy/beam ! Clean residual mean=0.000001 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.148699 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 158 components and 0.148699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057705Jy sigma=0.469334 ! Fit after self-cal, rms=0.057705Jy sigma=0.469325 ! Inverting map ! Added new window around map position (1, 25.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000818254 Jy ! Component: 100 - total flux cleaned = 0.0011089 Jy ! Component: 150 - total flux cleaned = 0.00130777 Jy ! Component: 200 - total flux cleaned = 0.00140987 Jy ! Total flux subtracted in 200 components = 0.00140987 Jy ! Clean residual min=-0.000807 max=0.000874 Jy/beam ! Clean residual mean=0.000001 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.150109 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 173 components and 0.150109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057689Jy sigma=0.469171 ! Fit after self-cal, rms=0.057688Jy sigma=0.469166 ! Inverting map ! Added new window around map position (-33.4, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467533 Jy ! Component: 100 - total flux cleaned = 0.000540519 Jy ! Component: 150 - total flux cleaned = 0.000659129 Jy ! Component: 200 - total flux cleaned = 0.000771328 Jy ! Total flux subtracted in 200 components = 0.000771328 Jy ! Clean residual min=-0.000790 max=0.000777 Jy/beam ! Clean residual mean=0.000001 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.15088 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 188 components and 0.15088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057673Jy sigma=0.469040 ! Fit after self-cal, rms=0.057673Jy sigma=0.469037 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057673Jy sigma=0.469037 ! Fit after self-cal, rms=0.057793Jy sigma=0.468932 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9042 mas, bmaj=1.963 mas, bpa=-4.233 degrees ! Estimated noise=0.442353 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000320448 Jy ! Component: 100 - total flux cleaned = -0.000228256 Jy ! Component: 150 - total flux cleaned = -0.000111956 Jy ! Component: 200 - total flux cleaned = -5.00123e-05 Jy ! Total flux subtracted in 200 components = -5.00123e-05 Jy ! Clean residual min=-0.000755 max=0.000756 Jy/beam ! Clean residual mean=0.000001 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.15083 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 195 components and 0.15083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057781Jy sigma=0.468833 ! Fit after self-cal, rms=0.057784Jy sigma=0.468831 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101388 Jy ! Component: 100 - total flux cleaned = 0.000157222 Jy ! Component: 150 - total flux cleaned = 0.000184116 Jy ! Component: 200 - total flux cleaned = 0.00021054 Jy ! Total flux subtracted in 200 components = 0.00021054 Jy ! Clean residual min=-0.000764 max=0.000750 Jy/beam ! Clean residual mean=0.000001 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.151041 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 210 components and 0.151041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057778Jy sigma=0.468780 ! Fit after self-cal, rms=0.057778Jy sigma=0.468779 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057778Jy sigma=0.468779 ! Fit after self-cal, rms=0.057771Jy sigma=0.468760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.154 mas, bmaj=2.979 mas, bpa=-1.403 degrees ! Estimated noise=0.547708 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.74789e-05 Jy ! Component: 100 - total flux cleaned = 0.000345539 Jy ! Component: 150 - total flux cleaned = 0.000571053 Jy ! Component: 200 - total flux cleaned = 0.00077703 Jy ! Total flux subtracted in 200 components = 0.00077703 Jy ! Clean residual min=-0.000733 max=0.000887 Jy/beam ! Clean residual mean=0.000003 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.151818 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 236 components and 0.151818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057767Jy sigma=0.468733 ! Fit after self-cal, rms=0.057768Jy sigma=0.468731 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20.4, -51.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000640872 Jy ! Component: 100 - total flux cleaned = 0.000731832 Jy ! Component: 150 - total flux cleaned = 0.000887131 Jy ! Component: 200 - total flux cleaned = 0.00102198 Jy ! Total flux subtracted in 200 components = 0.00102198 Jy ! Clean residual min=-0.000711 max=0.000788 Jy/beam ! Clean residual mean=0.000002 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.15284 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 257 components and 0.15284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057761Jy sigma=0.468654 ! Fit after self-cal, rms=0.057760Jy sigma=0.468648 ! Inverting map ! Added new window around map position (-32.4, -36.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000575159 Jy ! Component: 100 - total flux cleaned = 0.000664985 Jy ! Component: 150 - total flux cleaned = 0.000753342 Jy ! Component: 200 - total flux cleaned = 0.000833977 Jy ! Total flux subtracted in 200 components = 0.000833977 Jy ! Clean residual min=-0.000645 max=0.000601 Jy/beam ! Clean residual mean=0.000002 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.153674 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 282 components and 0.153674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057754Jy sigma=0.468592 ! Fit after self-cal, rms=0.057754Jy sigma=0.468587 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9038 mas, bmaj=1.963 mas, bpa=-4.222 degrees ! Estimated noise=0.441768 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9038 x 1.963 at -4.222 degrees (North through East) ! Clean map min=-0.0010007 max=0.10687 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7136 mas, bmaj=1.648 mas, bpa=-4.521 degrees ! Estimated noise=0.832679 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0800188 Jy ! Component: 100 - total flux cleaned = 0.101322 Jy ! Component: 150 - total flux cleaned = 0.112059 Jy ! Component: 200 - total flux cleaned = 0.118618 Jy ! Total flux subtracted in 200 components = 0.118618 Jy ! Clean residual min=-0.002209 max=0.003502 Jy/beam ! Clean residual mean=0.000004 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.118618 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.118618 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9038 mas, bmaj=1.963 mas, bpa=-4.222 degrees ! Estimated noise=0.441768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0070585 Jy ! Component: 100 - total flux cleaned = 0.0113329 Jy ! Component: 150 - total flux cleaned = 0.0141738 Jy ! Component: 200 - total flux cleaned = 0.0162643 Jy ! Total flux subtracted in 200 components = 0.0162643 Jy ! Clean residual min=-0.001241 max=0.001511 Jy/beam ! Clean residual mean=0.000005 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.134882 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 43 components and 0.134882 Jy ! Inverting map ! Added new window around map position (-24.4, -29.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180032 Jy ! Component: 100 - total flux cleaned = 0.00335058 Jy ! Component: 150 - total flux cleaned = 0.0047136 Jy ! Component: 200 - total flux cleaned = 0.00592809 Jy ! Total flux subtracted in 200 components = 0.00592809 Jy ! Clean residual min=-0.001082 max=0.001101 Jy/beam ! Clean residual mean=0.000003 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.14081 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 79 components and 0.14081 Jy ! Inverting map ! Added new window around map position (8, -5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011792 Jy ! Component: 100 - total flux cleaned = 0.00219728 Jy ! Component: 150 - total flux cleaned = 0.00310341 Jy ! Component: 200 - total flux cleaned = 0.00391603 Jy ! Total flux subtracted in 200 components = 0.00391603 Jy ! Clean residual min=-0.000973 max=0.000935 Jy/beam ! Clean residual mean=0.000002 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.144726 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 123 components and 0.144726 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.154 mas, bmaj=2.979 mas, bpa=-1.403 degrees ! Estimated noise=0.547708 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147201 Jy ! Component: 100 - total flux cleaned = 0.0026334 Jy ! Component: 150 - total flux cleaned = 0.00362701 Jy ! Component: 200 - total flux cleaned = 0.00442056 Jy ! Total flux subtracted in 200 components = 0.00442056 Jy ! Clean residual min=-0.000893 max=0.001015 Jy/beam ! Clean residual mean=0.000003 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.149147 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000696069 Jy ! Component: 100 - total flux cleaned = 0.00121346 Jy ! Component: 150 - total flux cleaned = 0.00168774 Jy ! Component: 200 - total flux cleaned = 0.00212643 Jy ! Total flux subtracted in 200 components = 0.00212643 Jy ! Clean residual min=-0.000861 max=0.000849 Jy/beam ! Clean residual mean=0.000002 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.151273 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 205 components and 0.151273 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9038 mas, bmaj=1.963 mas, bpa=-4.222 degrees ! Estimated noise=0.441768 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022211 Jy ! Component: 100 - total flux cleaned = 0.000275194 Jy ! Component: 150 - total flux cleaned = 0.000419805 Jy ! Component: 200 - total flux cleaned = 0.000465298 Jy ! Total flux subtracted in 200 components = 0.000465298 Jy ! Clean residual min=-0.000735 max=0.000784 Jy/beam ! Clean residual mean=0.000001 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.151738 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 230 components and 0.151738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057775Jy sigma=0.468768 ! Fit after self-cal, rms=0.057765Jy sigma=0.468730 wmodel J1640+1144_X_map.mod ! Writing 230 model components to file: J1640+1144_X_map.mod wobs J1640+1144_X_uvs.fits ! Writing UV FITS file: J1640+1144_X_uvs.fits wwins J1640+1144_X_map.win ! wwins: Wrote 13 windows to J1640+1144_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.53227e-05 Jy ! Component: 100 - total flux cleaned = -6.41498e-05 Jy ! Component: 150 - total flux cleaned = -8.91851e-05 Jy ! Component: 200 - total flux cleaned = -6.49765e-05 Jy ! Component: 250 - total flux cleaned = -5.31287e-05 Jy ! Component: 300 - total flux cleaned = -6.98531e-06 Jy ! Component: 350 - total flux cleaned = -1.87601e-05 Jy ! Component: 400 - total flux cleaned = -4.10525e-05 Jy ! Component: 450 - total flux cleaned = -7.40477e-05 Jy ! Component: 500 - total flux cleaned = -8.50198e-05 Jy ! Component: 550 - total flux cleaned = -0.000149767 Jy ! Component: 600 - total flux cleaned = -0.000171076 Jy ! Component: 650 - total flux cleaned = -0.000192078 Jy ! Component: 700 - total flux cleaned = -0.000202303 Jy ! Component: 750 - total flux cleaned = -0.000233243 Jy ! Component: 800 - total flux cleaned = -0.000243345 Jy ! Component: 850 - total flux cleaned = -0.00026352 Jy ! Component: 900 - total flux cleaned = -0.000263526 Jy ! Component: 950 - total flux cleaned = -0.000273394 Jy ! Component: 1000 - total flux cleaned = -0.000302958 Jy ! Component: 1050 - total flux cleaned = -0.000312706 Jy ! Component: 1100 - total flux cleaned = -0.00030311 Jy ! Component: 1150 - total flux cleaned = -0.000322119 Jy ! Component: 1200 - total flux cleaned = -0.00029363 Jy ! Component: 1250 - total flux cleaned = -0.000293622 Jy ! Component: 1300 - total flux cleaned = -0.000303116 Jy ! Component: 1350 - total flux cleaned = -0.000321581 Jy ! Component: 1400 - total flux cleaned = -0.000294091 Jy ! Component: 1450 - total flux cleaned = -0.000303344 Jy ! Component: 1500 - total flux cleaned = -0.000321263 Jy ! Component: 1550 - total flux cleaned = -0.000348171 Jy ! Component: 1600 - total flux cleaned = -0.000348112 Jy ! Component: 1650 - total flux cleaned = -0.000374537 Jy ! Component: 1700 - total flux cleaned = -0.000392034 Jy ! Component: 1750 - total flux cleaned = -0.000392041 Jy ! Component: 1800 - total flux cleaned = -0.000400731 Jy ! Component: 1850 - total flux cleaned = -0.000409248 Jy ! Component: 1900 - total flux cleaned = -0.000417702 Jy ! Component: 1950 - total flux cleaned = -0.000451508 Jy ! Component: 2000 - total flux cleaned = -0.00041791 Jy ! Component: 2050 - total flux cleaned = -0.000442942 Jy ! Component: 2100 - total flux cleaned = -0.000442943 Jy ! Component: 2150 - total flux cleaned = -0.000459444 Jy ! Component: 2200 - total flux cleaned = -0.000459456 Jy ! Component: 2250 - total flux cleaned = -0.000467497 Jy ! Component: 2300 - total flux cleaned = -0.000483708 Jy ! Component: 2350 - total flux cleaned = -0.0005079 Jy ! Component: 2400 - total flux cleaned = -0.000491835 Jy ! Component: 2450 - total flux cleaned = -0.000515622 Jy ! Component: 2500 - total flux cleaned = -0.000515578 Jy ! Component: 2550 - total flux cleaned = -0.00053918 Jy ! Component: 2600 - total flux cleaned = -0.000515647 Jy ! Component: 2650 - total flux cleaned = -0.000554494 Jy ! Component: 2700 - total flux cleaned = -0.000554463 Jy ! Component: 2750 - total flux cleaned = -0.000569849 Jy ! Component: 2800 - total flux cleaned = -0.000592723 Jy ! Component: 2850 - total flux cleaned = -0.000585175 Jy ! Component: 2900 - total flux cleaned = -0.000592729 Jy ! Component: 2950 - total flux cleaned = -0.000607814 Jy ! Component: 3000 - total flux cleaned = -0.00062271 Jy ! Component: 3050 - total flux cleaned = -0.000637642 Jy ! Component: 3100 - total flux cleaned = -0.000630247 Jy ! Component: 3150 - total flux cleaned = -0.000652402 Jy ! Component: 3200 - total flux cleaned = -0.000674436 Jy ! Component: 3250 - total flux cleaned = -0.000703701 Jy ! Component: 3300 - total flux cleaned = -0.000703647 Jy ! Component: 3350 - total flux cleaned = -0.000710895 Jy ! Component: 3400 - total flux cleaned = -0.000718107 Jy ! Component: 3450 - total flux cleaned = -0.000746797 Jy ! Component: 3500 - total flux cleaned = -0.000746802 Jy ! Component: 3550 - total flux cleaned = -0.000775196 Jy ! Component: 3600 - total flux cleaned = -0.000789365 Jy ! Component: 3650 - total flux cleaned = -0.00078936 Jy ! Component: 3700 - total flux cleaned = -0.000803363 Jy ! Component: 3750 - total flux cleaned = -0.000810369 Jy ! Component: 3800 - total flux cleaned = -0.000831201 Jy ! Component: 3850 - total flux cleaned = -0.000796677 Jy ! Component: 3900 - total flux cleaned = -0.000851642 Jy ! Component: 3950 - total flux cleaned = -0.000858435 Jy ! Component: 4000 - total flux cleaned = -0.000838005 Jy ! Component: 4050 - total flux cleaned = -0.000878665 Jy ! Total flux subtracted in 4096 components = -0.000871886 Jy ! Clean residual min=-0.000450 max=0.000369 Jy/beam ! Clean residual mean=0.000000 rms=0.000117 Jy/beam ! Combined flux in latest and established models = 0.150866 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 526 components and 0.150867 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1640+1144_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9038 x 1.963 at -4.222 degrees (North through East) ! Clean map min=-0.00056371 max=0.1075 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1640+1144_X_map.fits wmodel /image_prod/ug002_uva//J1640+1144_X_map.mod ! Writing 526 model components to file: /image_prod/ug002_uva//J1640+1144_X_map.mod wobs /image_prod/ug002_uva//J1640+1144_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1640+1144_X_uvs.fits wwins /image_prod/ug002_uva//J1640+1144_X_map.win ! wwins: Wrote 14 windows to /image_prod/ug002_uva//J1640+1144_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.107499 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000116851 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.326099 0.326099 0.652198 1.3044 2.60879 5.21759 10.4352 20.8703 41.7407 83.4814 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.107 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 919.965 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1640+1144_X_dfm.log closed on Thu Mar 5 02:51:53 2020