! Started logfile: /image_prod/ug002_uva//J1638+5720_X_e_dfm.log on Thu Mar 5 02:50:28 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1638+5720_X_e_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1638+5720_X_e_uva.fits ! AN table 1: 6 integrations on 28 of 28 possible baselines. ! AN table 2: 12 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.84127 visibilities/baseline/integration-bin. ! Found source: J1638+5720 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 5088 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1638+5720_X_e] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.899321Jy sigma=7.897494 ! Fit after self-cal, rms=0.706162Jy sigma=2.363048 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7257 mas, bmaj=0.874 mas, bpa=-17.58 degrees ! Estimated noise=3.5249 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.09749 Jy ! Component: 100 - total flux cleaned = 1.35716 Jy ! Total flux subtracted in 100 components = 1.35716 Jy ! Clean residual min=-0.056077 max=0.103977 Jy/beam ! Clean residual mean=0.000050 rms=0.012128 Jy/beam ! Combined flux in latest and established models = 1.35716 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.35716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.484317Jy sigma=1.349860 ! Fit after self-cal, rms=0.484259Jy sigma=1.349369 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114464 Jy ! Component: 100 - total flux cleaned = 0.175743 Jy ! Total flux subtracted in 100 components = 0.175743 Jy ! Clean residual min=-0.052058 max=0.065739 Jy/beam ! Clean residual mean=0.000042 rms=0.009877 Jy/beam ! Combined flux in latest and established models = 1.5329 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 1.5329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.423427Jy sigma=1.124387 ! Fit after self-cal, rms=0.423228Jy sigma=1.123261 ! Inverting map ! Added new window around map position (-1.2, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.06388 Jy ! Component: 100 - total flux cleaned = 0.105574 Jy ! Total flux subtracted in 100 components = 0.105574 Jy ! Clean residual min=-0.045358 max=0.051040 Jy/beam ! Clean residual mean=0.000042 rms=0.008808 Jy/beam ! Combined flux in latest and established models = 1.63848 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 1.63848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.400313Jy sigma=1.022218 ! Fit after self-cal, rms=0.399477Jy sigma=1.016185 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8653 mas, bmaj=1.068 mas, bpa=-20.77 degrees ! Estimated noise=2.38232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0675375 Jy ! Component: 100 - total flux cleaned = 0.115134 Jy ! Component: 150 - total flux cleaned = 0.151712 Jy ! Component: 200 - total flux cleaned = 0.180527 Jy ! Total flux subtracted in 200 components = 0.180527 Jy ! Clean residual min=-0.053728 max=0.052261 Jy/beam ! Clean residual mean=0.000127 rms=0.012959 Jy/beam ! Combined flux in latest and established models = 1.81901 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 36 components and 1.81901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.370385Jy sigma=0.950043 ! Fit after self-cal, rms=0.369722Jy sigma=0.945035 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8653 x 1.068 at -20.77 degrees (North through East) ! Clean map min=-0.051196 max=1.4498 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 KP 1.04 MK 1.05 ! NL 1.14 OV 0.92 PT 0.56 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.01 HN 1.03 KP 1.04 ! MK 0.98 NL 1.10 OV 0.92 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.04 KP 1.03 MK 1.06 ! NL 1.20 OV 0.93 PT 0.57 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.02 HN 1.00 KP 1.01 ! MK 0.99 NL 1.15 OV 0.94 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 KP 1.01 MK 1.08 ! NL 1.17 OV 0.90 PT 0.57 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.03 HN 1.01 KP 1.00 ! MK 1.00 NL 1.10 OV 0.92 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 KP 0.99 MK 1.06 ! NL 1.14 OV 0.94 PT 0.57 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.03 HN 0.99 KP 1.00 ! MK 0.98 NL 1.08 OV 0.95 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 KP 1.01 MK 1.06 ! NL 1.17 OV 0.94 PT 0.58 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 HN 1.04 KP 1.00 ! MK 0.99 NL 1.12 OV 0.94 SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 KP 1.02 MK 1.07 ! NL 1.18 OV 0.93 PT 0.55 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.03 HN 1.07 KP 1.02 ! MK 1.00 NL 1.13 OV 0.94 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 KP 1.02 MK 1.07 ! NL 1.16 OV 0.93 PT 0.56 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.00 HN 1.03 KP 1.01 ! MK 1.01 NL 1.11 OV 0.95 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 KP 1.00 MK 1.07 ! NL 1.15 OV 0.93 PT 0.56 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.02 HN 1.05 KP 1.00 ! MK 0.99 NL 1.09 OV 0.95 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 KP 1.01 MK 1.08 ! NL 1.16 OV 0.94 PT 0.55 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.03 HN 1.04 KP 1.01 ! MK 1.02 NL 1.12 OV 0.94 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.06 KP 1.01 MK 1.09 ! NL 1.15 OV 0.94 PT 0.59 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.05 HN 1.05 KP 1.02 ! MK 1.02 NL 1.09 OV 0.94 SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 KP 0.99 MK 1.08 ! NL 1.22 OV 0.94 PT 0.55 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.03 HN 1.06 KP 1.00 ! MK 1.01 NL 1.15 OV 0.95 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.05 KP 0.99 MK 1.12 ! NL 1.16 OV 0.93 PT 0.58 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.03 HN 1.05 KP 0.98 ! MK 1.05 NL 1.11 OV 0.94 SC 0.97 ! ! ! Fit before self-cal, rms=0.369722Jy sigma=0.945035 ! Fit after self-cal, rms=0.075365Jy sigma=0.310511 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.873 mas, bmaj=1.075 mas, bpa=-20.16 degrees ! Estimated noise=2.3741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0164855 Jy ! Component: 100 - total flux cleaned = -0.0186769 Jy ! Component: 150 - total flux cleaned = -0.0189555 Jy ! Component: 200 - total flux cleaned = -0.0192163 Jy ! Total flux subtracted in 200 components = -0.0192163 Jy ! Clean residual min=-0.011392 max=0.010209 Jy/beam ! Clean residual mean=0.000001 rms=0.002212 Jy/beam ! Combined flux in latest and established models = 1.79979 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 1.79979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070751Jy sigma=0.292919 ! Fit after self-cal, rms=0.070068Jy sigma=0.290301 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070068Jy sigma=0.290301 ! Fit after self-cal, rms=0.068219Jy sigma=0.281631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8729 mas, bmaj=1.074 mas, bpa=-20.19 degrees ! Estimated noise=2.36996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0087363 Jy ! Component: 100 - total flux cleaned = -0.0102851 Jy ! Component: 150 - total flux cleaned = -0.0110939 Jy ! Component: 200 - total flux cleaned = -0.0116246 Jy ! Total flux subtracted in 200 components = -0.0116246 Jy ! Clean residual min=-0.008824 max=0.008799 Jy/beam ! Clean residual mean=-0.000002 rms=0.001806 Jy/beam ! Combined flux in latest and established models = 1.78816 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 1.78816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065906Jy sigma=0.272733 ! Fit after self-cal, rms=0.065558Jy sigma=0.271422 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00836923 Jy ! Component: 100 - total flux cleaned = 0.0104504 Jy ! Component: 150 - total flux cleaned = 0.010951 Jy ! Component: 200 - total flux cleaned = 0.0109575 Jy ! Total flux subtracted in 200 components = 0.0109575 Jy ! Clean residual min=-0.007582 max=0.007017 Jy/beam ! Clean residual mean=-0.000002 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 1.79912 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 1.79912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063090Jy sigma=0.262115 ! Fit after self-cal, rms=0.062848Jy sigma=0.261412 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062848Jy sigma=0.261412 ! Fit after self-cal, rms=0.061939Jy sigma=0.258809 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8728 mas, bmaj=1.072 mas, bpa=-20.17 degrees ! Estimated noise=2.36619 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00370711 Jy ! Component: 100 - total flux cleaned = -0.00272705 Jy ! Component: 150 - total flux cleaned = -0.00222499 Jy ! Component: 200 - total flux cleaned = -0.00192712 Jy ! Total flux subtracted in 200 components = -0.00192712 Jy ! Clean residual min=-0.006719 max=0.006281 Jy/beam ! Clean residual mean=-0.000001 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 1.79719 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 1.7972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060725Jy sigma=0.254043 ! Fit after self-cal, rms=0.060582Jy sigma=0.253594 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.94125e-05 Jy ! Component: 100 - total flux cleaned = 0.000456848 Jy ! Component: 150 - total flux cleaned = 0.000808985 Jy ! Component: 200 - total flux cleaned = 0.00113705 Jy ! Total flux subtracted in 200 components = 0.00113705 Jy ! Clean residual min=-0.006134 max=0.006311 Jy/beam ! Clean residual mean=-0.000001 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 1.79833 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 64 components and 1.79833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060093Jy sigma=0.251610 ! Fit after self-cal, rms=0.060049Jy sigma=0.251489 ! Inverting map ! Added new window around map position (-2.6, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00647065 Jy ! Component: 100 - total flux cleaned = 0.0108718 Jy ! Component: 150 - total flux cleaned = 0.0133428 Jy ! Component: 200 - total flux cleaned = 0.0143802 Jy ! Total flux subtracted in 200 components = 0.0143802 Jy ! Clean residual min=-0.005508 max=0.005472 Jy/beam ! Clean residual mean=-0.000002 rms=0.001147 Jy/beam ! Combined flux in latest and established models = 1.81271 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 77 components and 1.81271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059105Jy sigma=0.247533 ! Fit after self-cal, rms=0.059006Jy sigma=0.247293 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059006Jy sigma=0.247293 ! Fit after self-cal, rms=0.058528Jy sigma=0.245921 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.976 mas, bmaj=2.152 mas, bpa=-78.31 degrees ! Estimated noise=3.44853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00249753 Jy ! Component: 100 - total flux cleaned = -0.00117085 Jy ! Component: 150 - total flux cleaned = 8.85516e-05 Jy ! Component: 200 - total flux cleaned = 0.000588141 Jy ! Total flux subtracted in 200 components = 0.000588141 Jy ! Clean residual min=-0.005760 max=0.005908 Jy/beam ! Clean residual mean=-0.000009 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 1.8133 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 90 components and 1.8133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058263Jy sigma=0.245107 ! Fit after self-cal, rms=0.058199Jy sigma=0.244702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.26778e-05 Jy ! Component: 100 - total flux cleaned = 0.000265675 Jy ! Component: 150 - total flux cleaned = 0.000324553 Jy ! Component: 200 - total flux cleaned = 0.000324812 Jy ! Total flux subtracted in 200 components = 0.000324812 Jy ! Clean residual min=-0.005794 max=0.005908 Jy/beam ! Clean residual mean=-0.000008 rms=0.001480 Jy/beam ! Combined flux in latest and established models = 1.81363 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 1.81363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058131Jy sigma=0.244513 ! Fit after self-cal, rms=0.058129Jy sigma=0.244466 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.873 mas, bmaj=1.072 mas, bpa=-20.08 degrees ! Estimated noise=2.36485 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.873 x 1.072 at -20.08 degrees (North through East) ! Clean map min=-0.0068658 max=1.4455 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058129Jy sigma=0.244466 ! Fit after self-cal, rms=0.054436Jy sigma=0.221683 ! Inverting map and beam ! Estimated beam: bmin=0.8726 mas, bmaj=1.072 mas, bpa=-20.02 degrees ! Estimated noise=2.36315 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00165314 Jy ! Component: 100 - total flux cleaned = -0.00165374 Jy ! Component: 150 - total flux cleaned = -0.00176333 Jy ! Component: 200 - total flux cleaned = -0.00185877 Jy ! Total flux subtracted in 200 components = -0.00185877 Jy ! Clean residual min=-0.004240 max=0.004123 Jy/beam ! Clean residual mean=-0.000003 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 1.81177 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 104 components and 1.81177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054041Jy sigma=0.219925 ! Fit after self-cal, rms=0.054011Jy sigma=0.219874 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112495 Jy ! Component: 100 - total flux cleaned = -3.07912e-05 Jy ! Component: 150 - total flux cleaned = -3.07329e-05 Jy ! Component: 200 - total flux cleaned = 0.000120287 Jy ! Total flux subtracted in 200 components = 0.000120287 Jy ! Clean residual min=-0.004039 max=0.004064 Jy/beam ! Clean residual mean=-0.000003 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 1.81189 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 110 components and 1.81189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053797Jy sigma=0.218919 ! Fit after self-cal, rms=0.053783Jy sigma=0.218903 ! Inverting map ! Added new window around map position (9.4, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033022 Jy ! Component: 100 - total flux cleaned = 0.00320264 Jy ! Component: 150 - total flux cleaned = 0.00355458 Jy ! Component: 200 - total flux cleaned = 0.00371547 Jy ! Total flux subtracted in 200 components = 0.00371547 Jy ! Clean residual min=-0.003904 max=0.003665 Jy/beam ! Clean residual mean=-0.000002 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 1.8156 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 128 components and 1.8156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053344Jy sigma=0.217128 ! Fit after self-cal, rms=0.053320Jy sigma=0.217042 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053320Jy sigma=0.217042 ! Fit after self-cal, rms=0.053189Jy sigma=0.216724 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7285 mas, bmaj=0.8742 mas, bpa=-16.87 degrees ! Estimated noise=3.54494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.10364 Jy ! Component: 100 - total flux cleaned = 1.36315 Jy ! Component: 150 - total flux cleaned = 1.47554 Jy ! Component: 200 - total flux cleaned = 1.54099 Jy ! Total flux subtracted in 200 components = 1.54099 Jy ! Clean residual min=-0.018339 max=0.036350 Jy/beam ! Clean residual mean=0.000004 rms=0.004594 Jy/beam ! Combined flux in latest and established models = 1.54099 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.54099 Jy ! Inverting map and beam ! Estimated beam: bmin=0.873 mas, bmaj=1.072 mas, bpa=-20.02 degrees ! Estimated noise=2.36284 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0683984 Jy ! Component: 100 - total flux cleaned = 0.112958 Jy ! Component: 150 - total flux cleaned = 0.143772 Jy ! Component: 200 - total flux cleaned = 0.165652 Jy ! Total flux subtracted in 200 components = 0.165652 Jy ! Clean residual min=-0.007616 max=0.013037 Jy/beam ! Clean residual mean=0.000006 rms=0.002240 Jy/beam ! Combined flux in latest and established models = 1.70664 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 28 components and 1.70664 Jy ! Inverting map ! Added new window around map position (0.2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160205 Jy ! Component: 100 - total flux cleaned = 0.0281336 Jy ! Component: 150 - total flux cleaned = 0.0379129 Jy ! Component: 200 - total flux cleaned = 0.0461633 Jy ! Total flux subtracted in 200 components = 0.0461633 Jy ! Clean residual min=-0.005356 max=0.006310 Jy/beam ! Clean residual mean=0.000002 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 1.7528 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 64 components and 1.7528 Jy ! Inverting map ! Added new window around map position (2.2, 14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00729798 Jy ! Component: 100 - total flux cleaned = 0.0134109 Jy ! Component: 150 - total flux cleaned = 0.0187259 Jy ! Component: 200 - total flux cleaned = 0.0234097 Jy ! Total flux subtracted in 200 components = 0.0234097 Jy ! Clean residual min=-0.004755 max=0.004673 Jy/beam ! Clean residual mean=0.000000 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 1.77621 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 85 components and 1.77621 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.976 mas, bmaj=2.153 mas, bpa=-78.63 degrees ! Estimated noise=3.44585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00880826 Jy ! Component: 100 - total flux cleaned = 0.0147518 Jy ! Component: 150 - total flux cleaned = 0.0195166 Jy ! Component: 200 - total flux cleaned = 0.0234657 Jy ! Total flux subtracted in 200 components = 0.0234657 Jy ! Clean residual min=-0.005877 max=0.005409 Jy/beam ! Clean residual mean=-0.000002 rms=0.001457 Jy/beam ! Combined flux in latest and established models = 1.79968 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330292 Jy ! Component: 100 - total flux cleaned = 0.00608347 Jy ! Component: 150 - total flux cleaned = 0.0081714 Jy ! Component: 200 - total flux cleaned = 0.00949128 Jy ! Total flux subtracted in 200 components = 0.00949128 Jy ! Clean residual min=-0.005325 max=0.004893 Jy/beam ! Clean residual mean=-0.000003 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 1.80917 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 151 components and 1.80917 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.873 mas, bmaj=1.072 mas, bpa=-20.02 degrees ! Estimated noise=2.36284 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002132 Jy ! Component: 100 - total flux cleaned = 0.00302079 Jy ! Component: 150 - total flux cleaned = 0.00351842 Jy ! Component: 200 - total flux cleaned = 0.0037908 Jy ! Total flux subtracted in 200 components = 0.0037908 Jy ! Clean residual min=-0.003431 max=0.004153 Jy/beam ! Clean residual mean=-0.000001 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 1.81296 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 171 components and 1.81296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052851Jy sigma=0.215453 ! Fit after self-cal, rms=0.052719Jy sigma=0.214720 wmodel J1638+5720_X_e_map.mod ! Writing 171 model components to file: J1638+5720_X_e_map.mod wobs J1638+5720_X_e_uvs.fits ! Writing UV FITS file: J1638+5720_X_e_uvs.fits wwins J1638+5720_X_e_map.win ! wwins: Wrote 7 windows to J1638+5720_X_e_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107716 Jy ! Component: 100 - total flux cleaned = 0.00125842 Jy ! Component: 150 - total flux cleaned = 0.00131731 Jy ! Component: 200 - total flux cleaned = 0.00126295 Jy ! Component: 250 - total flux cleaned = 0.00131594 Jy ! Component: 300 - total flux cleaned = 0.00142026 Jy ! Component: 350 - total flux cleaned = 0.00152166 Jy ! Component: 400 - total flux cleaned = 0.00162047 Jy ! Component: 450 - total flux cleaned = 0.00171623 Jy ! Component: 500 - total flux cleaned = 0.0019508 Jy ! Component: 550 - total flux cleaned = 0.00226955 Jy ! Component: 600 - total flux cleaned = 0.0023591 Jy ! Component: 650 - total flux cleaned = 0.00257795 Jy ! Component: 700 - total flux cleaned = 0.00275 Jy ! Component: 750 - total flux cleaned = 0.00304466 Jy ! Component: 800 - total flux cleaned = 0.00304418 Jy ! Component: 850 - total flux cleaned = 0.00304489 Jy ! Component: 900 - total flux cleaned = 0.00336547 Jy ! Component: 950 - total flux cleaned = 0.00340518 Jy ! Component: 1000 - total flux cleaned = 0.00340516 Jy ! Component: 1050 - total flux cleaned = 0.00355769 Jy ! Component: 1100 - total flux cleaned = 0.00367045 Jy ! Component: 1150 - total flux cleaned = 0.00378095 Jy ! Component: 1200 - total flux cleaned = 0.00385466 Jy ! Component: 1250 - total flux cleaned = 0.00403358 Jy ! Component: 1300 - total flux cleaned = 0.00424482 Jy ! Component: 1350 - total flux cleaned = 0.00424457 Jy ! Component: 1400 - total flux cleaned = 0.00424481 Jy ! Component: 1450 - total flux cleaned = 0.00431278 Jy ! Component: 1500 - total flux cleaned = 0.00437994 Jy ! Component: 1550 - total flux cleaned = 0.00454469 Jy ! Component: 1600 - total flux cleaned = 0.00447921 Jy ! Component: 1650 - total flux cleaned = 0.00451115 Jy ! Component: 1700 - total flux cleaned = 0.004511 Jy ! Component: 1750 - total flux cleaned = 0.00451075 Jy ! Component: 1800 - total flux cleaned = 0.00460378 Jy ! Component: 1850 - total flux cleaned = 0.00460346 Jy ! Component: 1900 - total flux cleaned = 0.00454376 Jy ! Component: 1950 - total flux cleaned = 0.00463362 Jy ! Component: 2000 - total flux cleaned = 0.00469289 Jy ! Component: 2050 - total flux cleaned = 0.00463475 Jy ! Component: 2100 - total flux cleaned = 0.0046922 Jy ! Component: 2150 - total flux cleaned = 0.00466309 Jy ! Component: 2200 - total flux cleaned = 0.0046629 Jy ! Component: 2250 - total flux cleaned = 0.00474633 Jy ! Component: 2300 - total flux cleaned = 0.00474606 Jy ! Component: 2350 - total flux cleaned = 0.00471881 Jy ! Component: 2400 - total flux cleaned = 0.00471913 Jy ! Component: 2450 - total flux cleaned = 0.00477254 Jy ! Component: 2500 - total flux cleaned = 0.0047724 Jy ! Component: 2550 - total flux cleaned = 0.00474635 Jy ! Component: 2600 - total flux cleaned = 0.00477271 Jy ! Component: 2650 - total flux cleaned = 0.00477282 Jy ! Component: 2700 - total flux cleaned = 0.00487391 Jy ! Component: 2750 - total flux cleaned = 0.00489883 Jy ! Component: 2800 - total flux cleaned = 0.0049985 Jy ! Component: 2850 - total flux cleaned = 0.00497399 Jy ! Component: 2900 - total flux cleaned = 0.00487642 Jy ! Component: 2950 - total flux cleaned = 0.00499748 Jy ! Component: 3000 - total flux cleaned = 0.00502128 Jy ! Component: 3050 - total flux cleaned = 0.00499777 Jy ! Component: 3100 - total flux cleaned = 0.00497423 Jy ! Component: 3150 - total flux cleaned = 0.00502071 Jy ! Component: 3200 - total flux cleaned = 0.00506698 Jy ! Component: 3250 - total flux cleaned = 0.00513543 Jy ! Component: 3300 - total flux cleaned = 0.0051351 Jy ! Component: 3350 - total flux cleaned = 0.00515747 Jy ! Component: 3400 - total flux cleaned = 0.00517985 Jy ! Component: 3450 - total flux cleaned = 0.00517976 Jy ! Component: 3500 - total flux cleaned = 0.0051797 Jy ! Component: 3550 - total flux cleaned = 0.00515834 Jy ! Component: 3600 - total flux cleaned = 0.0051796 Jy ! Component: 3650 - total flux cleaned = 0.00522227 Jy ! Component: 3700 - total flux cleaned = 0.00518004 Jy ! Component: 3750 - total flux cleaned = 0.00520094 Jy ! Component: 3800 - total flux cleaned = 0.00524217 Jy ! Component: 3850 - total flux cleaned = 0.00530404 Jy ! Component: 3900 - total flux cleaned = 0.00532448 Jy ! Component: 3950 - total flux cleaned = 0.00536505 Jy ! Component: 4000 - total flux cleaned = 0.00538527 Jy ! Component: 4050 - total flux cleaned = 0.00540514 Jy ! Total flux subtracted in 4096 components = 0.00542507 Jy ! Clean residual min=-0.001168 max=0.001055 Jy/beam ! Clean residual mean=-0.000000 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 1.81839 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 501 components and 1.81839 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1638+5720_X_e_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.873 x 1.072 at -20.02 degrees (North through East) ! Clean map min=-0.0018786 max=1.4511 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1638+5720_X_e_map.fits wmodel /image_prod/ug002_uva//J1638+5720_X_e_map.mod ! Writing 501 model components to file: /image_prod/ug002_uva//J1638+5720_X_e_map.mod wobs /image_prod/ug002_uva//J1638+5720_X_e_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1638+5720_X_e_uvs.fits wwins /image_prod/ug002_uva//J1638+5720_X_e_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uva//J1638+5720_X_e_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.45111 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000330895 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0684086 0.0684086 0.136817 0.273634 0.547269 1.09454 2.18908 4.37815 8.7563 17.5126 35.0252 70.0504 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.451 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4385.41 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1638+5720_X_e_dfm.log closed on Thu Mar 5 02:50:33 2020