! Started logfile: /image_prod/ug002_uva//J1638+5720_X_d_dfm.log on Thu Mar 5 02:50:23 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J1638+5720_X_d_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1638+5720_X_d_uva.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.804398 visibilities/baseline/integration-bin. ! Found source: J1638+5720 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 8340 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1638+5720_X_d] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.909148Jy sigma=7.895416 ! Fit after self-cal, rms=0.656954Jy sigma=2.582351 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6998 mas, bmaj=1.165 mas, bpa=-14.75 degrees ! Estimated noise=2.74711 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.18007 Jy ! Component: 100 - total flux cleaned = 1.46098 Jy ! Total flux subtracted in 100 components = 1.46098 Jy ! Clean residual min=-0.034964 max=0.111470 Jy/beam ! Clean residual mean=0.000174 rms=0.008912 Jy/beam ! Combined flux in latest and established models = 1.46098 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.46098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.289908Jy sigma=1.081130 ! Fit after self-cal, rms=0.289820Jy sigma=1.080694 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118541 Jy ! Component: 100 - total flux cleaned = 0.180089 Jy ! Total flux subtracted in 100 components = 0.180089 Jy ! Clean residual min=-0.027716 max=0.055619 Jy/beam ! Clean residual mean=0.000132 rms=0.006314 Jy/beam ! Combined flux in latest and established models = 1.64107 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 1.64107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.204214Jy sigma=0.763583 ! Fit after self-cal, rms=0.203908Jy sigma=0.761951 ! Inverting map ! Added new window around map position (-1, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0522437 Jy ! Component: 100 - total flux cleaned = 0.0851902 Jy ! Total flux subtracted in 100 components = 0.0851902 Jy ! Clean residual min=-0.026877 max=0.029310 Jy/beam ! Clean residual mean=0.000113 rms=0.005580 Jy/beam ! Combined flux in latest and established models = 1.72626 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 1.72626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.179062Jy sigma=0.677237 ! Fit after self-cal, rms=0.177739Jy sigma=0.670425 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8836 mas, bmaj=1.363 mas, bpa=-13.83 degrees ! Estimated noise=1.92189 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0404807 Jy ! Component: 100 - total flux cleaned = 0.0646767 Jy ! Component: 150 - total flux cleaned = 0.0803922 Jy ! Component: 200 - total flux cleaned = 0.0906984 Jy ! Total flux subtracted in 200 components = 0.0906984 Jy ! Clean residual min=-0.030024 max=0.030063 Jy/beam ! Clean residual mean=0.000103 rms=0.006520 Jy/beam ! Combined flux in latest and established models = 1.81696 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 47 components and 1.81696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.164264Jy sigma=0.634908 ! Fit after self-cal, rms=0.163748Jy sigma=0.632104 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8836 x 1.363 at -13.83 degrees (North through East) ! Clean map min=-0.02685 max=1.5429 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.07 HN 0.96 KP 1.06 ! LA 1.08 MK 1.04 OV 0.94 PT 0.88 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.05 HN 0.94 KP 1.07 ! LA 1.07 MK 1.04 OV 0.95 PT 0.90 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 0.94 KP 1.06 ! LA 1.08 MK 1.05 OV 0.95 PT 0.91 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.94 KP 1.07 ! LA 1.05 MK 1.02 OV 0.94 PT 0.88 ! SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.05 HN 0.95 KP 1.05 ! LA 1.05 MK 1.05 OV 0.95 PT 0.86 ! SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.06 HN 0.98 KP 1.06 ! LA 1.05 MK 1.04 OV 0.94 PT 0.88 ! SC 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.06 HN 0.95 KP 1.06 ! LA 1.06 MK 1.05 OV 0.93 PT 0.88 ! SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.06 HN 0.96 KP 1.05 ! LA 1.06 MK 1.05 OV 0.93 PT 0.88 ! SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 0.96 KP 1.05 ! LA 1.05 MK 1.03 OV 0.95 PT 0.88 ! SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 0.96 KP 1.04 ! LA 1.06 MK 1.05 OV 0.95 PT 0.86 ! SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.96 KP 1.06 ! LA 1.06 MK 1.05 OV 0.94 PT 0.89 ! SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 0.97 KP 1.04 ! LA 1.05 MK 1.04 OV 0.93 PT 0.87 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.163748Jy sigma=0.632104 ! Fit after self-cal, rms=0.080207Jy sigma=0.323409 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8912 mas, bmaj=1.37 mas, bpa=-13.98 degrees ! Estimated noise=1.9241 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143362 Jy ! Component: 100 - total flux cleaned = 0.0216952 Jy ! Component: 150 - total flux cleaned = 0.0251626 Jy ! Component: 200 - total flux cleaned = 0.0267592 Jy ! Total flux subtracted in 200 components = 0.0267592 Jy ! Clean residual min=-0.011322 max=0.011586 Jy/beam ! Clean residual mean=0.000133 rms=0.002375 Jy/beam ! Combined flux in latest and established models = 1.84372 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 1.84372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076880Jy sigma=0.311174 ! Fit after self-cal, rms=0.076665Jy sigma=0.310253 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076665Jy sigma=0.310253 ! Fit after self-cal, rms=0.060050Jy sigma=0.244710 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8893 mas, bmaj=1.371 mas, bpa=-13.93 degrees ! Estimated noise=1.92306 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020397 Jy ! Component: 100 - total flux cleaned = 0.00354711 Jy ! Component: 150 - total flux cleaned = 0.00403038 Jy ! Component: 200 - total flux cleaned = 0.00412042 Jy ! Total flux subtracted in 200 components = 0.00412042 Jy ! Clean residual min=-0.003632 max=0.003962 Jy/beam ! Clean residual mean=0.000007 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 1.84784 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 84 components and 1.84784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059200Jy sigma=0.241452 ! Fit after self-cal, rms=0.059112Jy sigma=0.241047 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.2, 6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264019 Jy ! Component: 100 - total flux cleaned = 0.00410713 Jy ! Component: 150 - total flux cleaned = 0.00471874 Jy ! Component: 200 - total flux cleaned = 0.00503494 Jy ! Total flux subtracted in 200 components = 0.00503494 Jy ! Clean residual min=-0.003293 max=0.003604 Jy/beam ! Clean residual mean=0.000007 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 1.85287 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 92 components and 1.85287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058742Jy sigma=0.239651 ! Fit after self-cal, rms=0.058720Jy sigma=0.239547 ! Inverting map ! Added new window around map position (5.4, -6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158473 Jy ! Component: 100 - total flux cleaned = 0.00179762 Jy ! Component: 150 - total flux cleaned = 0.00222411 Jy ! Component: 200 - total flux cleaned = 0.00253042 Jy ! Total flux subtracted in 200 components = 0.00253042 Jy ! Clean residual min=-0.003161 max=0.003161 Jy/beam ! Clean residual mean=0.000006 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 1.8554 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 103 components and 1.8554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058405Jy sigma=0.238343 ! Fit after self-cal, rms=0.058392Jy sigma=0.238295 ! Inverting map ! Added new window around map position (-25.6, -38.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281144 Jy ! Component: 100 - total flux cleaned = 0.00364861 Jy ! Component: 150 - total flux cleaned = 0.00392313 Jy ! Component: 200 - total flux cleaned = 0.00418134 Jy ! Total flux subtracted in 200 components = 0.00418134 Jy ! Clean residual min=-0.003122 max=0.002828 Jy/beam ! Clean residual mean=0.000007 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 1.85959 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 121 components and 1.85959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058177Jy sigma=0.237463 ! Fit after self-cal, rms=0.058171Jy sigma=0.237429 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058171Jy sigma=0.237429 ! Fit after self-cal, rms=0.057906Jy sigma=0.236358 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8893 mas, bmaj=1.372 mas, bpa=-13.87 degrees ! Estimated noise=1.92249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000315683 Jy ! Component: 100 - total flux cleaned = 0.00024538 Jy ! Component: 150 - total flux cleaned = -2.07356e-05 Jy ! Component: 200 - total flux cleaned = 3.6468e-05 Jy ! Total flux subtracted in 200 components = 3.6468e-05 Jy ! Clean residual min=-0.002767 max=0.002773 Jy/beam ! Clean residual mean=0.000005 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 1.85962 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 127 components and 1.85962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057707Jy sigma=0.235568 ! Fit after self-cal, rms=0.057695Jy sigma=0.235501 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108983 Jy ! Component: 100 - total flux cleaned = 0.000273905 Jy ! Component: 150 - total flux cleaned = 0.000531718 Jy ! Component: 200 - total flux cleaned = 0.000581107 Jy ! Total flux subtracted in 200 components = 0.000581107 Jy ! Clean residual min=-0.002760 max=0.002652 Jy/beam ! Clean residual mean=0.000005 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 1.8602 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 141 components and 1.8602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057600Jy sigma=0.235142 ! Fit after self-cal, rms=0.057598Jy sigma=0.235123 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057598Jy sigma=0.235123 ! Fit after self-cal, rms=0.057560Jy sigma=0.234946 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.317 mas, bmaj=2.438 mas, bpa=50.91 degrees ! Estimated noise=2.76232 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151978 Jy ! Component: 100 - total flux cleaned = -2.69793e-06 Jy ! Component: 150 - total flux cleaned = 4.52646e-05 Jy ! Component: 200 - total flux cleaned = -3.19988e-05 Jy ! Total flux subtracted in 200 components = -3.19988e-05 Jy ! Clean residual min=-0.002820 max=0.003183 Jy/beam ! Clean residual mean=0.000010 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 1.86017 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 152 components and 1.86017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057509Jy sigma=0.234731 ! Fit after self-cal, rms=0.057494Jy sigma=0.234666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-27.8, -8.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213595 Jy ! Component: 100 - total flux cleaned = 0.00218339 Jy ! Component: 150 - total flux cleaned = 0.00197484 Jy ! Component: 200 - total flux cleaned = 0.00179054 Jy ! Total flux subtracted in 200 components = 0.00179054 Jy ! Clean residual min=-0.002707 max=0.002625 Jy/beam ! Clean residual mean=0.000009 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 1.86196 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 174 components and 1.86196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057392Jy sigma=0.234261 ! Fit after self-cal, rms=0.057388Jy sigma=0.234237 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8894 mas, bmaj=1.372 mas, bpa=-13.84 degrees ! Estimated noise=1.92246 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8894 x 1.372 at -13.84 degrees (North through East) ! Clean map min=-0.0025051 max=1.54 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057388Jy sigma=0.234237 ! Fit after self-cal, rms=0.053614Jy sigma=0.211461 ! Inverting map and beam ! Estimated beam: bmin=0.8894 mas, bmaj=1.372 mas, bpa=-13.83 degrees ! Estimated noise=1.92216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000294652 Jy ! Component: 100 - total flux cleaned = 0.00017466 Jy ! Component: 150 - total flux cleaned = 1.33881e-05 Jy ! Component: 200 - total flux cleaned = -3.45303e-05 Jy ! Total flux subtracted in 200 components = -3.45303e-05 Jy ! Clean residual min=-0.002645 max=0.002334 Jy/beam ! Clean residual mean=0.000004 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 1.86193 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 194 components and 1.86193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053505Jy sigma=0.211005 ! Fit after self-cal, rms=0.053503Jy sigma=0.210984 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.17826e-05 Jy ! Component: 100 - total flux cleaned = 0.000281636 Jy ! Component: 150 - total flux cleaned = 0.000368031 Jy ! Component: 200 - total flux cleaned = 0.000410811 Jy ! Total flux subtracted in 200 components = 0.000410811 Jy ! Clean residual min=-0.002634 max=0.002283 Jy/beam ! Clean residual mean=0.000004 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 1.86234 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 205 components and 1.86234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053437Jy sigma=0.210708 ! Fit after self-cal, rms=0.053436Jy sigma=0.210698 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053436Jy sigma=0.210698 ! Fit after self-cal, rms=0.053421Jy sigma=0.210657 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.704 mas, bmaj=1.172 mas, bpa=-14.72 degrees ! Estimated noise=2.76442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.18709 Jy ! Component: 100 - total flux cleaned = 1.46711 Jy ! Component: 150 - total flux cleaned = 1.58293 Jy ! Component: 200 - total flux cleaned = 1.65064 Jy ! Total flux subtracted in 200 components = 1.65064 Jy ! Clean residual min=-0.011943 max=0.035196 Jy/beam ! Clean residual mean=0.000057 rms=0.003175 Jy/beam ! Combined flux in latest and established models = 1.65064 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.65064 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8894 mas, bmaj=1.372 mas, bpa=-13.82 degrees ! Estimated noise=1.92193 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0645097 Jy ! Component: 100 - total flux cleaned = 0.101621 Jy ! Component: 150 - total flux cleaned = 0.124448 Jy ! Component: 200 - total flux cleaned = 0.140737 Jy ! Total flux subtracted in 200 components = 0.140737 Jy ! Clean residual min=-0.004827 max=0.010140 Jy/beam ! Clean residual mean=0.000009 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 1.79137 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 49 components and 1.79137 Jy ! Inverting map ! Added new window around map position (-0.2, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123943 Jy ! Component: 100 - total flux cleaned = 0.0217196 Jy ! Component: 150 - total flux cleaned = 0.0288653 Jy ! Component: 200 - total flux cleaned = 0.0340005 Jy ! Total flux subtracted in 200 components = 0.0340005 Jy ! Clean residual min=-0.003302 max=0.003857 Jy/beam ! Clean residual mean=0.000007 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 1.82537 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 79 components and 1.82537 Jy ! Inverting map ! Added new window around map position (-1.8, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425787 Jy ! Component: 100 - total flux cleaned = 0.00773615 Jy ! Component: 150 - total flux cleaned = 0.0108367 Jy ! Component: 200 - total flux cleaned = 0.0136141 Jy ! Total flux subtracted in 200 components = 0.0136141 Jy ! Clean residual min=-0.002860 max=0.002911 Jy/beam ! Clean residual mean=0.000006 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 1.83899 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 104 components and 1.83899 Jy ! Inverting map ! Added new window around map position (1.6, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293467 Jy ! Component: 100 - total flux cleaned = 0.00525081 Jy ! Component: 150 - total flux cleaned = 0.00717156 Jy ! Component: 200 - total flux cleaned = 0.0088591 Jy ! Total flux subtracted in 200 components = 0.0088591 Jy ! Clean residual min=-0.002695 max=0.002694 Jy/beam ! Clean residual mean=0.000005 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 1.84785 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 121 components and 1.84785 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.317 mas, bmaj=2.439 mas, bpa=50.9 degrees ! Estimated noise=2.76086 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331041 Jy ! Component: 100 - total flux cleaned = 0.00575626 Jy ! Component: 150 - total flux cleaned = 0.00691552 Jy ! Component: 200 - total flux cleaned = 0.00790953 Jy ! Total flux subtracted in 200 components = 0.00790953 Jy ! Clean residual min=-0.002369 max=0.002869 Jy/beam ! Clean residual mean=0.000012 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 1.85576 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000933887 Jy ! Component: 100 - total flux cleaned = 0.00166286 Jy ! Component: 150 - total flux cleaned = 0.00222511 Jy ! Component: 200 - total flux cleaned = 0.00269785 Jy ! Total flux subtracted in 200 components = 0.00269785 Jy ! Clean residual min=-0.002301 max=0.002677 Jy/beam ! Clean residual mean=0.000011 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 1.85846 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 190 components and 1.85846 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8894 mas, bmaj=1.372 mas, bpa=-13.82 degrees ! Estimated noise=1.92193 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000355743 Jy ! Component: 100 - total flux cleaned = -0.000139557 Jy ! Component: 150 - total flux cleaned = 0.000130391 Jy ! Component: 200 - total flux cleaned = 0.00044909 Jy ! Total flux subtracted in 200 components = 0.00044909 Jy ! Clean residual min=-0.002363 max=0.002585 Jy/beam ! Clean residual mean=0.000004 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 1.8589 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 209 components and 1.8589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053563Jy sigma=0.211482 ! Fit after self-cal, rms=0.053484Jy sigma=0.211097 wmodel J1638+5720_X_d_map.mod ! Writing 209 model components to file: J1638+5720_X_d_map.mod wobs J1638+5720_X_d_uvs.fits ! Writing UV FITS file: J1638+5720_X_d_uvs.fits wwins J1638+5720_X_d_map.win ! wwins: Wrote 10 windows to J1638+5720_X_d_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500375 Jy ! Component: 100 - total flux cleaned = 0.000621381 Jy ! Component: 150 - total flux cleaned = 0.00104204 Jy ! Component: 200 - total flux cleaned = 0.00133716 Jy ! Component: 250 - total flux cleaned = 0.0016231 Jy ! Component: 300 - total flux cleaned = 0.00190039 Jy ! Component: 350 - total flux cleaned = 0.00203599 Jy ! Component: 400 - total flux cleaned = 0.00223513 Jy ! Component: 450 - total flux cleaned = 0.00223545 Jy ! Component: 500 - total flux cleaned = 0.00236345 Jy ! Component: 550 - total flux cleaned = 0.00239481 Jy ! Component: 600 - total flux cleaned = 0.00251792 Jy ! Component: 650 - total flux cleaned = 0.00260876 Jy ! Component: 700 - total flux cleaned = 0.00275843 Jy ! Component: 750 - total flux cleaned = 0.00287652 Jy ! Component: 800 - total flux cleaned = 0.00305137 Jy ! Component: 850 - total flux cleaned = 0.00310896 Jy ! Component: 900 - total flux cleaned = 0.00325131 Jy ! Component: 950 - total flux cleaned = 0.00342028 Jy ! Component: 1000 - total flux cleaned = 0.00353103 Jy ! Component: 1050 - total flux cleaned = 0.00364128 Jy ! Component: 1100 - total flux cleaned = 0.00375071 Jy ! Component: 1150 - total flux cleaned = 0.00383145 Jy ! Component: 1200 - total flux cleaned = 0.00396514 Jy ! Component: 1250 - total flux cleaned = 0.0041766 Jy ! Component: 1300 - total flux cleaned = 0.00422858 Jy ! Component: 1350 - total flux cleaned = 0.00435801 Jy ! Component: 1400 - total flux cleaned = 0.0044606 Jy ! Component: 1450 - total flux cleaned = 0.00458805 Jy ! Component: 1500 - total flux cleaned = 0.00468877 Jy ! Component: 1550 - total flux cleaned = 0.00478855 Jy ! Component: 1600 - total flux cleaned = 0.00493652 Jy ! Component: 1650 - total flux cleaned = 0.00493647 Jy ! Component: 1700 - total flux cleaned = 0.00503382 Jy ! Component: 1750 - total flux cleaned = 0.00522618 Jy ! Component: 1800 - total flux cleaned = 0.00510653 Jy ! Component: 1850 - total flux cleaned = 0.00524871 Jy ! Component: 1900 - total flux cleaned = 0.00529549 Jy ! Component: 1950 - total flux cleaned = 0.00538883 Jy ! Component: 2000 - total flux cleaned = 0.00541214 Jy ! Component: 2050 - total flux cleaned = 0.00554992 Jy ! Component: 2100 - total flux cleaned = 0.00561823 Jy ! Component: 2150 - total flux cleaned = 0.00573142 Jy ! Component: 2200 - total flux cleaned = 0.00582067 Jy ! Component: 2250 - total flux cleaned = 0.00588734 Jy ! Component: 2300 - total flux cleaned = 0.00586556 Jy ! Component: 2350 - total flux cleaned = 0.0060405 Jy ! Component: 2400 - total flux cleaned = 0.00612738 Jy ! Component: 2450 - total flux cleaned = 0.00617046 Jy ! Component: 2500 - total flux cleaned = 0.00627798 Jy ! Component: 2550 - total flux cleaned = 0.00627823 Jy ! Component: 2600 - total flux cleaned = 0.00640492 Jy ! Component: 2650 - total flux cleaned = 0.00640504 Jy ! Component: 2700 - total flux cleaned = 0.00644675 Jy ! Component: 2750 - total flux cleaned = 0.00650897 Jy ! Component: 2800 - total flux cleaned = 0.00650919 Jy ! Component: 2850 - total flux cleaned = 0.00659066 Jy ! Component: 2900 - total flux cleaned = 0.00667176 Jy ! Component: 2950 - total flux cleaned = 0.00663142 Jy ! Component: 3000 - total flux cleaned = 0.00671158 Jy ! Component: 3050 - total flux cleaned = 0.00667154 Jy ! Component: 3100 - total flux cleaned = 0.00669125 Jy ! Component: 3150 - total flux cleaned = 0.00673069 Jy ! Component: 3200 - total flux cleaned = 0.00676981 Jy ! Component: 3250 - total flux cleaned = 0.00675045 Jy ! Component: 3300 - total flux cleaned = 0.00680834 Jy ! Component: 3350 - total flux cleaned = 0.00692367 Jy ! Component: 3400 - total flux cleaned = 0.00694254 Jy ! Component: 3450 - total flux cleaned = 0.0069047 Jy ! Component: 3500 - total flux cleaned = 0.00692357 Jy ! Component: 3550 - total flux cleaned = 0.00699844 Jy ! Component: 3600 - total flux cleaned = 0.00709149 Jy ! Component: 3650 - total flux cleaned = 0.00701741 Jy ! Component: 3700 - total flux cleaned = 0.00710969 Jy ! Component: 3750 - total flux cleaned = 0.00705476 Jy ! Component: 3800 - total flux cleaned = 0.00716391 Jy ! Component: 3850 - total flux cleaned = 0.00723626 Jy ! Component: 3900 - total flux cleaned = 0.00714611 Jy ! Component: 3950 - total flux cleaned = 0.00727134 Jy ! Component: 4000 - total flux cleaned = 0.00725342 Jy ! Component: 4050 - total flux cleaned = 0.00727113 Jy ! Total flux subtracted in 4096 components = 0.00730642 Jy ! Clean residual min=-0.001062 max=0.001042 Jy/beam ! Clean residual mean=0.000001 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 1.86621 Jy keep ! Adding 324 model components to the UV plane model. ! The established model now contains 532 components and 1.86621 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1638+5720_X_d_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8894 x 1.372 at -13.82 degrees (North through East) ! Clean map min=-0.0024999 max=1.5435 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1638+5720_X_d_map.fits wmodel /image_prod/ug002_uva//J1638+5720_X_d_map.mod ! Writing 532 model components to file: /image_prod/ug002_uva//J1638+5720_X_d_map.mod wobs /image_prod/ug002_uva//J1638+5720_X_d_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1638+5720_X_d_uvs.fits wwins /image_prod/ug002_uva//J1638+5720_X_d_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J1638+5720_X_d_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.5435 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000295771 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.057487 0.057487 0.114974 0.229948 0.459896 0.919791 1.83958 3.67917 7.35833 14.7167 29.4333 58.8666 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.543 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 5218.58 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1638+5720_X_d_dfm.log closed on Thu Mar 5 02:50:28 2020