! Started logfile: /image_prod/ug002_uva//J1634+6245_S_dfm.log on Thu Mar 5 02:47:48 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1634+6245_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1634+6245_S_uva.fits ! AN table 1: 151 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.999706 visibilities/baseline/integration-bin. ! Found source: J1634+6245 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 20379 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1634+6245_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.056445Jy sigma=8.156787 ! Fit after self-cal, rms=0.908008Jy sigma=7.114553 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.181 mas, bmaj=3.795 mas, bpa=2.307 degrees ! Estimated noise=1.23813 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0797817 Jy ! Component: 100 - total flux cleaned = 0.12229 Jy ! Total flux subtracted in 100 components = 0.12229 Jy ! Clean residual min=-0.020211 max=0.030083 Jy/beam ! Clean residual mean=-0.000837 rms=0.006792 Jy/beam ! Combined flux in latest and established models = 0.12229 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.12229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.294758Jy sigma=1.796484 ! Fit after self-cal, rms=0.294347Jy sigma=1.790412 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.925 mas, bmaj=4.631 mas, bpa=0.5897 degrees ! Estimated noise=0.65401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0581024 Jy ! Component: 100 - total flux cleaned = 0.0943002 Jy ! Component: 150 - total flux cleaned = 0.116912 Jy ! Component: 200 - total flux cleaned = 0.131047 Jy ! Total flux subtracted in 200 components = 0.131047 Jy ! Clean residual min=-0.033967 max=0.040322 Jy/beam ! Clean residual mean=-0.000701 rms=0.010070 Jy/beam ! Combined flux in latest and established models = 0.253338 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 41 components and 0.253338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.276949Jy sigma=1.690387 ! Fit after self-cal, rms=0.277167Jy sigma=1.684957 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.925 x 4.631 at 0.5897 degrees (North through East) ! Clean map min=-0.032024 max=0.10382 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.28 FD 1.12 HN 3.25 KP 1.08 ! LA 0.41 MK 1.30 NL 2.10 OV 2.91 ! PT 0.62 SC 1.19 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.39 FD 0.79 HN 2.27 KP 0.72 ! LA 0.61 MK 0.94 NL 1.94 OV 2.10 ! PT 0.89 SC 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 2.25 FD 0.83 HN 2.43 KP 0.69 ! LA 0.58 MK 1.10 NL 1.92 OV 2.30 ! PT 0.80 SC 0.81 ! ! ! Fit before self-cal, rms=0.277167Jy sigma=1.684957 ! Fit after self-cal, rms=0.393113Jy sigma=1.498183 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=4.856 mas, bpa=4.348 degrees ! Estimated noise=0.7857 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141156 Jy ! Component: 100 - total flux cleaned = 0.0172541 Jy ! Component: 150 - total flux cleaned = 0.0175127 Jy ! Component: 200 - total flux cleaned = 0.0175119 Jy ! Total flux subtracted in 200 components = 0.0175119 Jy ! Clean residual min=-0.032323 max=0.044452 Jy/beam ! Clean residual mean=-0.000479 rms=0.009538 Jy/beam ! Combined flux in latest and established models = 0.27085 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.27085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.391226Jy sigma=1.500552 ! Fit after self-cal, rms=0.402578Jy sigma=1.470888 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.402578Jy sigma=1.470888 ! Fit after self-cal, rms=6.852946Jy sigma=1.294736 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=4.934 mas, bpa=-1.875 degrees ! Estimated noise=0.874175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146048 Jy ! Component: 100 - total flux cleaned = 0.0171282 Jy ! Component: 150 - total flux cleaned = 0.0178079 Jy ! Component: 200 - total flux cleaned = 0.0183087 Jy ! Total flux subtracted in 200 components = 0.0183087 Jy ! Clean residual min=-0.028111 max=0.033254 Jy/beam ! Clean residual mean=-0.000104 rms=0.008781 Jy/beam ! Combined flux in latest and established models = 0.289158 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.289158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=6.851650Jy sigma=1.295145 ! Fit after self-cal, rms=6.855403Jy sigma=1.284378 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00289307 Jy ! Component: 100 - total flux cleaned = -0.00314355 Jy ! Component: 150 - total flux cleaned = -0.0030516 Jy ! Component: 200 - total flux cleaned = -0.00297422 Jy ! Total flux subtracted in 200 components = -0.00297422 Jy ! Clean residual min=-0.028199 max=0.032838 Jy/beam ! Clean residual mean=-0.000126 rms=0.009166 Jy/beam ! Combined flux in latest and established models = 0.286184 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.286184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=6.855377Jy sigma=1.284904 ! Fit after self-cal, rms=6.855471Jy sigma=1.284614 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=6.855471Jy sigma=1.284614 ! Fit after self-cal, rms=15.110512Jy sigma=1.272927 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.107 mas, bmaj=4.725 mas, bpa=-7.151 degrees ! Estimated noise=0.904879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00650242 Jy ! Component: 100 - total flux cleaned = 0.00716513 Jy ! Component: 150 - total flux cleaned = 0.00729457 Jy ! Component: 200 - total flux cleaned = 0.0075048 Jy ! Total flux subtracted in 200 components = 0.0075048 Jy ! Clean residual min=-0.031481 max=0.034596 Jy/beam ! Clean residual mean=-0.000012 rms=0.009419 Jy/beam ! Combined flux in latest and established models = 0.293689 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 65 components and 0.293689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=15.110111Jy sigma=1.275600 ! Fit after self-cal, rms=15.111265Jy sigma=1.274330 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000653114 Jy ! Component: 100 - total flux cleaned = -0.00076683 Jy ! Component: 150 - total flux cleaned = -0.000674691 Jy ! Component: 200 - total flux cleaned = -0.00067316 Jy ! Total flux subtracted in 200 components = -0.00067316 Jy ! Clean residual min=-0.030860 max=0.034909 Jy/beam ! Clean residual mean=-0.000016 rms=0.009410 Jy/beam ! Combined flux in latest and established models = 0.293016 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.293016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=15.111213Jy sigma=1.275097 ! Fit after self-cal, rms=15.111300Jy sigma=1.274950 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=15.111300Jy sigma=1.274950 ! Fit after self-cal, rms=25.446983Jy sigma=1.272695 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.812 mas, bmaj=10.91 mas, bpa=82.75 degrees ! Estimated noise=1.08111 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00630224 Jy ! Component: 100 - total flux cleaned = 0.00658531 Jy ! Component: 150 - total flux cleaned = 0.00683255 Jy ! Component: 200 - total flux cleaned = 0.00705133 Jy ! Total flux subtracted in 200 components = 0.00705133 Jy ! Clean residual min=-0.052929 max=0.057143 Jy/beam ! Clean residual mean=-0.000015 rms=0.017441 Jy/beam ! Combined flux in latest and established models = 0.300067 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 68 components and 0.300067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=25.446512Jy sigma=1.277712 ! Fit after self-cal, rms=25.447035Jy sigma=1.275513 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00148329 Jy ! Component: 100 - total flux cleaned = -0.00147628 Jy ! Component: 150 - total flux cleaned = -0.00126869 Jy ! Component: 200 - total flux cleaned = -0.00109316 Jy ! Total flux subtracted in 200 components = -0.00109316 Jy ! Clean residual min=-0.053202 max=0.056848 Jy/beam ! Clean residual mean=-0.000026 rms=0.017419 Jy/beam ! Combined flux in latest and established models = 0.298974 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 70 components and 0.298974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=25.446892Jy sigma=1.281274 ! Fit after self-cal, rms=25.447239Jy sigma=1.279508 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=4.19 mas, bmaj=4.947 mas, bpa=-14.89 degrees ! Estimated noise=0.997087 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.19 x 4.947 at -14.89 degrees (North through East) ! Clean map min=-0.034177 max=0.15711 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.365 mas, bmaj=3.953 mas, bpa=-17.55 degrees ! Estimated noise=2.13297 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123342 Jy ! Component: 100 - total flux cleaned = 0.187355 Jy ! Component: 150 - total flux cleaned = 0.226337 Jy ! Component: 200 - total flux cleaned = 0.250902 Jy ! Total flux subtracted in 200 components = 0.250902 Jy ! Clean residual min=-0.030413 max=0.030014 Jy/beam ! Clean residual mean=-0.000339 rms=0.008272 Jy/beam ! Combined flux in latest and established models = 0.250903 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.250903 Jy ! Inverting map and beam ! Estimated beam: bmin=4.19 mas, bmaj=4.947 mas, bpa=-14.89 degrees ! Estimated noise=0.997087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0239814 Jy ! Component: 100 - total flux cleaned = 0.035605 Jy ! Component: 150 - total flux cleaned = 0.0413654 Jy ! Component: 200 - total flux cleaned = 0.0434151 Jy ! Total flux subtracted in 200 components = 0.0434151 Jy ! Clean residual min=-0.034509 max=0.037808 Jy/beam ! Clean residual mean=-0.000051 rms=0.010342 Jy/beam ! Combined flux in latest and established models = 0.294318 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 30 components and 0.294318 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.812 mas, bmaj=10.91 mas, bpa=82.75 degrees ! Estimated noise=1.08111 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169815 Jy ! Component: 100 - total flux cleaned = 0.00193158 Jy ! Component: 150 - total flux cleaned = 0.00212193 Jy ! Component: 200 - total flux cleaned = 0.00227994 Jy ! Total flux subtracted in 200 components = 0.00227994 Jy ! Clean residual min=-0.053676 max=0.056567 Jy/beam ! Clean residual mean=-0.000051 rms=0.017413 Jy/beam ! Combined flux in latest and established models = 0.296598 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124869 Jy ! Component: 100 - total flux cleaned = 0.000231478 Jy ! Component: 150 - total flux cleaned = 0.000325463 Jy ! Component: 200 - total flux cleaned = 0.000405553 Jy ! Total flux subtracted in 200 components = 0.000405553 Jy ! Clean residual min=-0.053580 max=0.056781 Jy/beam ! Clean residual mean=-0.000046 rms=0.017411 Jy/beam ! Combined flux in latest and established models = 0.297003 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.297003 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.19 mas, bmaj=4.947 mas, bpa=-14.89 degrees ! Estimated noise=0.997087 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261478 Jy ! Component: 100 - total flux cleaned = -0.000440365 Jy ! Component: 150 - total flux cleaned = -0.00111451 Jy ! Component: 200 - total flux cleaned = -0.00136096 Jy ! Total flux subtracted in 200 components = -0.00136096 Jy ! Clean residual min=-0.034020 max=0.037811 Jy/beam ! Clean residual mean=-0.000043 rms=0.010333 Jy/beam ! Combined flux in latest and established models = 0.295642 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 40 components and 0.295642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=25.447109Jy sigma=1.278383 ! Fit after self-cal, rms=25.447216Jy sigma=1.277601 wmodel J1634+6245_S_map.mod ! Writing 40 model components to file: J1634+6245_S_map.mod wobs J1634+6245_S_uvs.fits ! Writing UV FITS file: J1634+6245_S_uvs.fits wwins J1634+6245_S_map.win ! wwins: Wrote 1 windows to J1634+6245_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488733 Jy ! Component: 100 - total flux cleaned = 0.00674314 Jy ! Component: 150 - total flux cleaned = 0.00910863 Jy ! Component: 200 - total flux cleaned = 0.010826 Jy ! Component: 250 - total flux cleaned = 0.0119505 Jy ! Component: 300 - total flux cleaned = 0.0147154 Jy ! Component: 350 - total flux cleaned = 0.0174281 Jy ! Component: 400 - total flux cleaned = 0.020093 Jy ! Component: 450 - total flux cleaned = 0.0232349 Jy ! Component: 500 - total flux cleaned = 0.0258003 Jy ! Component: 550 - total flux cleaned = 0.0283335 Jy ! Component: 600 - total flux cleaned = 0.0303253 Jy ! Component: 650 - total flux cleaned = 0.0318003 Jy ! Component: 700 - total flux cleaned = 0.0337424 Jy ! Component: 750 - total flux cleaned = 0.0361336 Jy ! Component: 800 - total flux cleaned = 0.0375481 Jy ! Component: 850 - total flux cleaned = 0.038482 Jy ! Component: 900 - total flux cleaned = 0.0398687 Jy ! Component: 950 - total flux cleaned = 0.0421481 Jy ! Component: 1000 - total flux cleaned = 0.0439472 Jy ! Component: 1050 - total flux cleaned = 0.0461724 Jy ! Component: 1100 - total flux cleaned = 0.0483715 Jy ! Component: 1150 - total flux cleaned = 0.0496795 Jy ! Component: 1200 - total flux cleaned = 0.0522634 Jy ! Component: 1250 - total flux cleaned = 0.0531186 Jy ! Component: 1300 - total flux cleaned = 0.0556595 Jy ! Component: 1350 - total flux cleaned = 0.0569218 Jy ! Component: 1400 - total flux cleaned = 0.0590046 Jy ! Component: 1450 - total flux cleaned = 0.0598257 Jy ! Component: 1500 - total flux cleaned = 0.0626876 Jy ! Component: 1550 - total flux cleaned = 0.0643055 Jy ! Component: 1600 - total flux cleaned = 0.0663185 Jy ! Component: 1650 - total flux cleaned = 0.0679136 Jy ! Component: 1700 - total flux cleaned = 0.0706799 Jy ! Component: 1750 - total flux cleaned = 0.0710744 Jy ! Component: 1800 - total flux cleaned = 0.0738029 Jy ! Component: 1850 - total flux cleaned = 0.0761211 Jy ! Component: 1900 - total flux cleaned = 0.0788043 Jy ! Component: 1950 - total flux cleaned = 0.0807057 Jy ! Component: 2000 - total flux cleaned = 0.0833437 Jy ! Component: 2050 - total flux cleaned = 0.0840936 Jy ! Component: 2100 - total flux cleaned = 0.086696 Jy ! Component: 2150 - total flux cleaned = 0.0889098 Jy ! Component: 2200 - total flux cleaned = 0.0911114 Jy ! Component: 2250 - total flux cleaned = 0.0940226 Jy ! Component: 2300 - total flux cleaned = 0.0947462 Jy ! Component: 2350 - total flux cleaned = 0.0972608 Jy ! Component: 2400 - total flux cleaned = 0.0997596 Jy ! Component: 2450 - total flux cleaned = 0.101532 Jy ! Component: 2500 - total flux cleaned = 0.102944 Jy ! Component: 2550 - total flux cleaned = 0.105045 Jy ! Component: 2600 - total flux cleaned = 0.10713 Jy ! Component: 2650 - total flux cleaned = 0.109547 Jy ! Component: 2700 - total flux cleaned = 0.110236 Jy ! Component: 2750 - total flux cleaned = 0.112626 Jy ! Component: 2800 - total flux cleaned = 0.114325 Jy ! Component: 2850 - total flux cleaned = 0.115678 Jy ! Component: 2900 - total flux cleaned = 0.118362 Jy ! Component: 2950 - total flux cleaned = 0.119698 Jy ! Component: 3000 - total flux cleaned = 0.120693 Jy ! Component: 3050 - total flux cleaned = 0.122018 Jy ! Component: 3100 - total flux cleaned = 0.124322 Jy ! Component: 3150 - total flux cleaned = 0.126934 Jy ! Component: 3200 - total flux cleaned = 0.128558 Jy ! Component: 3250 - total flux cleaned = 0.130819 Jy ! Component: 3300 - total flux cleaned = 0.131463 Jy ! Component: 3350 - total flux cleaned = 0.132425 Jy ! Component: 3400 - total flux cleaned = 0.134016 Jy ! Component: 3450 - total flux cleaned = 0.135599 Jy ! Component: 3500 - total flux cleaned = 0.136858 Jy ! Component: 3550 - total flux cleaned = 0.137483 Jy ! Component: 3600 - total flux cleaned = 0.138111 Jy ! Component: 3650 - total flux cleaned = 0.138732 Jy ! Component: 3700 - total flux cleaned = 0.140589 Jy ! Component: 3750 - total flux cleaned = 0.142127 Jy ! Component: 3800 - total flux cleaned = 0.143655 Jy ! Component: 3850 - total flux cleaned = 0.14335 Jy ! Component: 3900 - total flux cleaned = 0.145168 Jy ! Component: 3950 - total flux cleaned = 0.146978 Jy ! Component: 4000 - total flux cleaned = 0.147576 Jy ! Component: 4050 - total flux cleaned = 0.148769 Jy ! Total flux subtracted in 4096 components = 0.149956 Jy ! Clean residual min=-0.014863 max=0.019100 Jy/beam ! Clean residual mean=-0.000111 rms=0.006364 Jy/beam ! Combined flux in latest and established models = 0.445599 Jy keep ! Adding 476 model components to the UV plane model. ! The established model now contains 516 components and 0.445599 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1634+6245_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.19 x 4.947 at -14.89 degrees (North through East) ! Clean map min=-0.03322 max=0.16408 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1634+6245_S_map.fits wmodel /image_prod/ug002_uva//J1634+6245_S_map.mod ! Writing 516 model components to file: /image_prod/ug002_uva//J1634+6245_S_map.mod wobs /image_prod/ug002_uva//J1634+6245_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1634+6245_S_uvs.fits wwins /image_prod/ug002_uva//J1634+6245_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1634+6245_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.164077 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.006334 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -11.5812 11.5812 23.1623 46.3246 92.6492 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.019 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.164 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 25.904 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1634+6245_S_dfm.log closed on Thu Mar 5 02:47:52 2020