! Started logfile: /image_prod/ug002_uva//J1626+5809_X_dfm.log on Thu Mar  5 02:44:10 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J1626+5809_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J1626+5809_X_uva.fits
! AN table 1: 80 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.920833 visibilities/baseline/integration-bin.
! Found source: J1626+5809
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 31824 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1626+5809_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010902Jy  sigma=9.095781
! Fit after  self-cal, rms=0.871676Jy  sigma=7.806210
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6928 mas, bmaj=1.168 mas, bpa=-15.85 degrees
! Estimated noise=0.971155 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0943893 Jy
! Component: 100  -  total flux cleaned = 0.132829 Jy
! Total flux subtracted in 100 components = 0.132829 Jy
! Clean residual min=-0.005816 max=0.017386 Jy/beam
! Clean residual mean=0.000019 rms=0.001298 Jy/beam
! Combined flux in latest and established models = 0.132829 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.132829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065502Jy  sigma=0.557591
! Fit after  self-cal, rms=0.064898Jy  sigma=0.552839
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202655 Jy
! Component: 100  -  total flux cleaned = 0.0304822 Jy
! Total flux subtracted in 100 components = 0.0304822 Jy
! Clean residual min=-0.003640 max=0.005511 Jy/beam
! Clean residual mean=0.000016 rms=0.000763 Jy/beam
! Combined flux in latest and established models = 0.163312 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.163312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056960Jy  sigma=0.477709
! Fit after  self-cal, rms=0.056871Jy  sigma=0.477111
! Inverting map 
! Added new window around map position (0.2, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00645604 Jy
! Component: 100  -  total flux cleaned = 0.0106564 Jy
! Total flux subtracted in 100 components = 0.0106564 Jy
! Clean residual min=-0.003356 max=0.003467 Jy/beam
! Clean residual mean=0.000015 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.173968 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 18 components and 0.173968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055801Jy  sigma=0.468078
! Fit after  self-cal, rms=0.055783Jy  sigma=0.467939
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9364 mas, bmaj=1.447 mas, bpa=-14.83 degrees
! Estimated noise=0.448948 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, -8.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00477872 Jy
! Component: 100  -  total flux cleaned = 0.00800807 Jy
! Component: 150  -  total flux cleaned = 0.0104063 Jy
! Component: 200  -  total flux cleaned = 0.012254 Jy
! Total flux subtracted in 200 components = 0.012254 Jy
! Clean residual min=-0.002734 max=0.002540 Jy/beam
! Clean residual mean=0.000024 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.186222 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 43 components and 0.186222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055203Jy  sigma=0.463725
! Fit after  self-cal, rms=0.055169Jy  sigma=0.463421
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9364 x 1.447 at -14.83 degrees (North through East)
! Clean map  min=-0.0026679  max=0.12676 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.07     HN        0.95     KP        1.06     
!   LA        1.04     MK        1.03     OV        0.93     PT        0.88     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        0.95     KP        1.06     
!   LA        1.04     MK        1.04     OV        0.96     PT        0.93     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        0.97     KP        1.08     
!   LA        1.03     MK        1.07     OV        0.95     PT        0.89     
!   SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        0.96     KP        1.08     
!   LA        1.03     MK        1.01     OV        0.95     PT        0.88     
!   SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.05     HN        0.96     KP        1.06     
!   LA        1.02     MK        1.05     OV        0.94     PT        0.87     
!   SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.06     HN        0.99     KP        1.06     
!   LA        1.02     MK        1.04     OV        0.94     PT        0.88     
!   SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.07     HN        0.95     KP        1.04     
!   LA        1.04     MK        1.03     OV        0.94     PT        0.89     
!   SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.07     HN        0.96     KP        1.06     
!   LA        1.02     MK        1.04     OV        0.94     PT        0.88     
!   SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        0.95     KP        1.05     
!   LA        1.01     MK        1.01     OV        0.97     PT        0.90     
!   SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.07     HN        0.98     KP        1.03     
!   LA        1.03     MK        1.05     OV        0.97     PT        0.86     
!   SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.96     KP        1.06     
!   LA        1.06     MK        1.03     OV        0.93     PT        0.87     
!   SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        0.95     KP        1.04     
!   LA        1.03     MK        1.04     OV        0.92     PT        0.87     
!   SC        0.96     
! 
! 
! Fit before self-cal, rms=0.055169Jy  sigma=0.463421
! Fit after  self-cal, rms=0.053035Jy  sigma=0.451452
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9414 mas, bmaj=1.453 mas, bpa=-14.88 degrees
! Estimated noise=0.447727 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000889608 Jy
! Component: 100  -  total flux cleaned = 0.000980831 Jy
! Component: 150  -  total flux cleaned = 0.00108465 Jy
! Component: 200  -  total flux cleaned = 0.00115197 Jy
! Total flux subtracted in 200 components = 0.00115197 Jy
! Clean residual min=-0.001492 max=0.001685 Jy/beam
! Clean residual mean=0.000028 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.187374 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 58 components and 0.187374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053004Jy  sigma=0.451187
! Fit after  self-cal, rms=0.052997Jy  sigma=0.451074
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052997Jy  sigma=0.451074
! Fit after  self-cal, rms=0.052604Jy  sigma=0.448165
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9414 mas, bmaj=1.451 mas, bpa=-14.77 degrees
! Estimated noise=0.446966 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.71895e-05 Jy
! Component: 100  -  total flux cleaned = -0.000183138 Jy
! Component: 150  -  total flux cleaned = -0.000259404 Jy
! Component: 200  -  total flux cleaned = -0.000292798 Jy
! Total flux subtracted in 200 components = -0.000292798 Jy
! Clean residual min=-0.001001 max=0.001232 Jy/beam
! Clean residual mean=0.000005 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.187081 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 73 components and 0.187081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052586Jy  sigma=0.448001
! Fit after  self-cal, rms=0.052587Jy  sigma=0.447972
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110779 Jy
! Component: 100  -  total flux cleaned = 0.00130856 Jy
! Component: 150  -  total flux cleaned = 0.00136766 Jy
! Component: 200  -  total flux cleaned = 0.00133385 Jy
! Total flux subtracted in 200 components = 0.00133385 Jy
! Clean residual min=-0.000945 max=0.000890 Jy/beam
! Clean residual mean=0.000006 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.188415 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 93 components and 0.188415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052561Jy  sigma=0.447712
! Fit after  self-cal, rms=0.052557Jy  sigma=0.447683
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052557Jy  sigma=0.447683
! Fit after  self-cal, rms=0.052493Jy  sigma=0.447619
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9412 mas, bmaj=1.451 mas, bpa=-14.8 degrees
! Estimated noise=0.446573 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000502647 Jy
! Component: 100  -  total flux cleaned = 0.000559566 Jy
! Component: 150  -  total flux cleaned = 0.00059221 Jy
! Component: 200  -  total flux cleaned = 0.000564242 Jy
! Total flux subtracted in 200 components = 0.000564242 Jy
! Clean residual min=-0.000858 max=0.000842 Jy/beam
! Clean residual mean=0.000005 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.188979 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 100 components and 0.188979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052481Jy  sigma=0.447496
! Fit after  self-cal, rms=0.052480Jy  sigma=0.447484
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125112 Jy
! Component: 100  -  total flux cleaned = 0.000124603 Jy
! Component: 150  -  total flux cleaned = 0.000111703 Jy
! Component: 200  -  total flux cleaned = 8.89621e-05 Jy
! Total flux subtracted in 200 components = 8.89621e-05 Jy
! Clean residual min=-0.000854 max=0.000842 Jy/beam
! Clean residual mean=0.000005 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.189068 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 106 components and 0.189068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052473Jy  sigma=0.447432
! Fit after  self-cal, rms=0.052473Jy  sigma=0.447429
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052473Jy  sigma=0.447429
! Fit after  self-cal, rms=0.052438Jy  sigma=0.447406
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.449 mas, bmaj=2.66 mas, bpa=40.06 degrees
! Estimated noise=0.576751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000336421 Jy
! Component: 100  -  total flux cleaned = 0.000393724 Jy
! Component: 150  -  total flux cleaned = 0.000410112 Jy
! Component: 200  -  total flux cleaned = 0.000409433 Jy
! Total flux subtracted in 200 components = 0.000409433 Jy
! Clean residual min=-0.000918 max=0.000954 Jy/beam
! Clean residual mean=0.000013 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.189478 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 133 components and 0.189478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052437Jy  sigma=0.447382
! Fit after  self-cal, rms=0.052436Jy  sigma=0.447376
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-42, -44.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000572628 Jy
! Component: 100  -  total flux cleaned = 0.000695697 Jy
! Component: 150  -  total flux cleaned = 0.000733593 Jy
! Component: 200  -  total flux cleaned = 0.000733595 Jy
! Total flux subtracted in 200 components = 0.000733595 Jy
! Clean residual min=-0.000878 max=0.000780 Jy/beam
! Clean residual mean=0.000009 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.190211 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 155 components and 0.190211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052428Jy  sigma=0.447276
! Fit after  self-cal, rms=0.052427Jy  sigma=0.447270
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9412 mas, bmaj=1.451 mas, bpa=-14.84 degrees
! Estimated noise=0.446338 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9412 x 1.451 at -14.84 degrees (North through East)
! Clean map  min=-0.00078796  max=0.12565 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.695 mas, bmaj=1.17 mas, bpa=-15.89 degrees
! Estimated noise=0.969345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0946338 Jy
! Component: 100  -  total flux cleaned = 0.134553 Jy
! Component: 150  -  total flux cleaned = 0.153945 Jy
! Component: 200  -  total flux cleaned = 0.164001 Jy
! Total flux subtracted in 200 components = 0.164001 Jy
! Clean residual min=-0.002507 max=0.004985 Jy/beam
! Clean residual mean=0.000006 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.164001 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.164001 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9412 mas, bmaj=1.451 mas, bpa=-14.84 degrees
! Estimated noise=0.446338 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00790285 Jy
! Component: 100  -  total flux cleaned = 0.0123752 Jy
! Component: 150  -  total flux cleaned = 0.0154079 Jy
! Component: 200  -  total flux cleaned = 0.0175822 Jy
! Total flux subtracted in 200 components = 0.0175822 Jy
! Clean residual min=-0.001042 max=0.001252 Jy/beam
! Clean residual mean=0.000007 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.181583 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 35 components and 0.181583 Jy
! Inverting map 
! Added new window around map position (0.8, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164814 Jy
! Component: 100  -  total flux cleaned = 0.00295649 Jy
! Component: 150  -  total flux cleaned = 0.00402592 Jy
! Component: 200  -  total flux cleaned = 0.00479485 Jy
! Total flux subtracted in 200 components = 0.00479485 Jy
! Clean residual min=-0.000906 max=0.000835 Jy/beam
! Clean residual mean=0.000006 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.186378 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 59 components and 0.186378 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.449 mas, bmaj=2.66 mas, bpa=40.06 degrees
! Estimated noise=0.576751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110604 Jy
! Component: 100  -  total flux cleaned = 0.00188581 Jy
! Component: 150  -  total flux cleaned = 0.00236229 Jy
! Component: 200  -  total flux cleaned = 0.00267 Jy
! Total flux subtracted in 200 components = 0.00267 Jy
! Clean residual min=-0.000903 max=0.000835 Jy/beam
! Clean residual mean=0.000011 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.189048 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00019235 Jy
! Component: 100  -  total flux cleaned = 0.000329281 Jy
! Component: 150  -  total flux cleaned = 0.000402473 Jy
! Component: 200  -  total flux cleaned = 0.000479838 Jy
! Total flux subtracted in 200 components = 0.000479838 Jy
! Clean residual min=-0.000889 max=0.000812 Jy/beam
! Clean residual mean=0.000011 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.189528 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 123 components and 0.189528 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9412 mas, bmaj=1.451 mas, bpa=-14.84 degrees
! Estimated noise=0.446338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000154423 Jy
! Component: 100  -  total flux cleaned = -9.2134e-05 Jy
! Component: 150  -  total flux cleaned = -1.63849e-05 Jy
! Component: 200  -  total flux cleaned = 3.63743e-05 Jy
! Total flux subtracted in 200 components = 3.63743e-05 Jy
! Clean residual min=-0.000831 max=0.000789 Jy/beam
! Clean residual mean=0.000005 rms=0.000179 Jy/beam
! Combined flux in latest and established models = 0.189565 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 149 components and 0.189565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052427Jy  sigma=0.447283
! Fit after  self-cal, rms=0.052423Jy  sigma=0.447256
wmodel J1626+5809_X_map.mod
! Writing 149 model components to file: J1626+5809_X_map.mod
wobs   J1626+5809_X_uvs.fits
! Writing UV FITS file: J1626+5809_X_uvs.fits
wwins  J1626+5809_X_map.win
! wwins: Wrote 6 windows to J1626+5809_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000164408 Jy
! Component: 100  -  total flux cleaned = -0.000205192 Jy
! Component: 150  -  total flux cleaned = -0.000193084 Jy
! Component: 200  -  total flux cleaned = -0.000193131 Jy
! Component: 250  -  total flux cleaned = -0.000193017 Jy
! Component: 300  -  total flux cleaned = -0.000216629 Jy
! Component: 350  -  total flux cleaned = -0.000193414 Jy
! Component: 400  -  total flux cleaned = -0.00020484 Jy
! Component: 450  -  total flux cleaned = -0.000182373 Jy
! Component: 500  -  total flux cleaned = -0.0001824 Jy
! Component: 550  -  total flux cleaned = -0.000160456 Jy
! Component: 600  -  total flux cleaned = -0.000149613 Jy
! Component: 650  -  total flux cleaned = -0.000117312 Jy
! Component: 700  -  total flux cleaned = -6.43575e-05 Jy
! Component: 750  -  total flux cleaned = -3.3029e-05 Jy
! Component: 800  -  total flux cleaned = -3.29525e-05 Jy
! Component: 850  -  total flux cleaned = 8.09674e-06 Jy
! Component: 900  -  total flux cleaned = 2.83307e-05 Jy
! Component: 950  -  total flux cleaned = 3.84459e-05 Jy
! Component: 1000  -  total flux cleaned = 4.84946e-05 Jy
! Component: 1050  -  total flux cleaned = 7.80409e-05 Jy
! Component: 1100  -  total flux cleaned = 0.000117101 Jy
! Component: 1150  -  total flux cleaned = 0.000165328 Jy
! Component: 1200  -  total flux cleaned = 0.00015564 Jy
! Component: 1250  -  total flux cleaned = 0.000155694 Jy
! Component: 1300  -  total flux cleaned = 0.000184023 Jy
! Component: 1350  -  total flux cleaned = 0.000184158 Jy
! Component: 1400  -  total flux cleaned = 0.000249149 Jy
! Component: 1450  -  total flux cleaned = 0.000276748 Jy
! Component: 1500  -  total flux cleaned = 0.000276825 Jy
! Component: 1550  -  total flux cleaned = 0.000304079 Jy
! Component: 1600  -  total flux cleaned = 0.000313124 Jy
! Component: 1650  -  total flux cleaned = 0.000348952 Jy
! Component: 1700  -  total flux cleaned = 0.000375736 Jy
! Component: 1750  -  total flux cleaned = 0.000410993 Jy
! Component: 1800  -  total flux cleaned = 0.000402233 Jy
! Component: 1850  -  total flux cleaned = 0.000402234 Jy
! Component: 1900  -  total flux cleaned = 0.000393517 Jy
! Component: 1950  -  total flux cleaned = 0.00039358 Jy
! Component: 2000  -  total flux cleaned = 0.00039355 Jy
! Component: 2050  -  total flux cleaned = 0.000385038 Jy
! Component: 2100  -  total flux cleaned = 0.000410358 Jy
! Component: 2150  -  total flux cleaned = 0.000427104 Jy
! Component: 2200  -  total flux cleaned = 0.000402142 Jy
! Component: 2250  -  total flux cleaned = 0.000418775 Jy
! Component: 2300  -  total flux cleaned = 0.000410692 Jy
! Component: 2350  -  total flux cleaned = 0.000418887 Jy
! Component: 2400  -  total flux cleaned = 0.000418963 Jy
! Component: 2450  -  total flux cleaned = 0.00045939 Jy
! Component: 2500  -  total flux cleaned = 0.000459375 Jy
! Component: 2550  -  total flux cleaned = 0.000499368 Jy
! Component: 2600  -  total flux cleaned = 0.000475526 Jy
! Component: 2650  -  total flux cleaned = 0.000499311 Jy
! Component: 2700  -  total flux cleaned = 0.000507202 Jy
! Component: 2750  -  total flux cleaned = 0.000499368 Jy
! Component: 2800  -  total flux cleaned = 0.000514959 Jy
! Component: 2850  -  total flux cleaned = 0.000569057 Jy
! Component: 2900  -  total flux cleaned = 0.000569083 Jy
! Component: 2950  -  total flux cleaned = 0.000599747 Jy
! Component: 3000  -  total flux cleaned = 0.000584524 Jy
! Component: 3050  -  total flux cleaned = 0.000599621 Jy
! Component: 3100  -  total flux cleaned = 0.00061476 Jy
! Component: 3150  -  total flux cleaned = 0.000637263 Jy
! Component: 3200  -  total flux cleaned = 0.000659661 Jy
! Component: 3250  -  total flux cleaned = 0.000659688 Jy
! Component: 3300  -  total flux cleaned = 0.000659642 Jy
! Component: 3350  -  total flux cleaned = 0.000696293 Jy
! Component: 3400  -  total flux cleaned = 0.00071818 Jy
! Component: 3450  -  total flux cleaned = 0.000725466 Jy
! Component: 3500  -  total flux cleaned = 0.000725411 Jy
! Component: 3550  -  total flux cleaned = 0.000725409 Jy
! Component: 3600  -  total flux cleaned = 0.000754059 Jy
! Component: 3650  -  total flux cleaned = 0.000739813 Jy
! Component: 3700  -  total flux cleaned = 0.000761157 Jy
! Component: 3750  -  total flux cleaned = 0.000796432 Jy
! Component: 3800  -  total flux cleaned = 0.00081752 Jy
! Component: 3850  -  total flux cleaned = 0.000817495 Jy
! Component: 3900  -  total flux cleaned = 0.000866238 Jy
! Component: 3950  -  total flux cleaned = 0.00085234 Jy
! Component: 4000  -  total flux cleaned = 0.00087299 Jy
! Component: 4050  -  total flux cleaned = 0.000907318 Jy
! Total flux subtracted in 4096 components = 0.000886793 Jy
! Clean residual min=-0.000433 max=0.000411 Jy/beam
! Clean residual mean=0.000001 rms=0.000115 Jy/beam
! Combined flux in latest and established models = 0.190451 Jy
keep
! Adding 309 model components to the UV plane model.
! The established model now contains 458 components and 0.190451 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J1626+5809_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9412 x 1.451 at -14.84 degrees (North through East)
! Clean map  min=-0.00061663  max=0.12562 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J1626+5809_X_map.fits
wmodel /image_prod/ug002_uva//J1626+5809_X_map.mod
! Writing 458 model components to file: /image_prod/ug002_uva//J1626+5809_X_map.mod
wobs   /image_prod/ug002_uva//J1626+5809_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J1626+5809_X_uvs.fits
wwins  /image_prod/ug002_uva//J1626+5809_X_map.win
! wwins: Wrote 7 windows to /image_prod/ug002_uva//J1626+5809_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.125618 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000114314 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.273004 0.273004 0.546009 1.09202 2.18404 4.36807 8.73614 17.4723 34.9446 69.8891
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.125 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1098.88 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J1626+5809_X_dfm.log closed on Thu Mar  5 02:44:15 2020