! Started logfile: /image_prod/ug002_uva//J1608-1625_S_dfm.log on Thu Mar 5 02:35:32 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1608-1625_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1608-1625_S_uva.fits ! AN table 1: 50 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.997778 visibilities/baseline/integration-bin. ! Found source: J1608-1625 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 5388 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1608-1625_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.008307Jy sigma=7.315670 ! Fit after self-cal, rms=0.934840Jy sigma=6.751422 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.562 mas, bmaj=6.637 mas, bpa=-1.418 degrees ! Estimated noise=2.17097 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0515292 Jy ! Component: 100 - total flux cleaned = 0.0633156 Jy ! Total flux subtracted in 100 components = 0.0633156 Jy ! Clean residual min=-0.006282 max=0.006768 Jy/beam ! Clean residual mean=0.000011 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 0.0633156 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0633156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078505Jy sigma=0.488791 ! Fit after self-cal, rms=0.077812Jy sigma=0.483960 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=7.935 mas, bpa=-1.766 degrees ! Estimated noise=1.38608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00804418 Jy ! Component: 100 - total flux cleaned = 0.0110704 Jy ! Component: 150 - total flux cleaned = 0.0124324 Jy ! Component: 200 - total flux cleaned = 0.0128702 Jy ! Total flux subtracted in 200 components = 0.0128702 Jy ! Clean residual min=-0.004305 max=0.003879 Jy/beam ! Clean residual mean=-0.000002 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.0761858 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 31 components and 0.0761858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077336Jy sigma=0.476580 ! Fit after self-cal, rms=0.077338Jy sigma=0.476500 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.154 x 7.935 at -1.766 degrees (North through East) ! Clean map min=-0.0041024 max=0.070096 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.06 HN 1.03 KP 1.02 ! LA 1.07 MK 1.07 OV 0.77 PT 0.96 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 0.95 HN 1.08 KP 1.03 ! LA 1.06 MK 1.00 OV 0.88 PT 1.01 ! SC 0.82 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.05 HN 1.06 KP 1.00 ! LA 0.95 MK 0.97 OV 0.87 PT 1.03 ! SC 1.08 ! ! ! Fit before self-cal, rms=0.077338Jy sigma=0.476500 ! Fit after self-cal, rms=0.079840Jy sigma=0.471710 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=7.924 mas, bpa=-0.9615 degrees ! Estimated noise=1.37496 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.60858e-05 Jy ! Component: 100 - total flux cleaned = -8.59668e-05 Jy ! Component: 150 - total flux cleaned = -0.000127308 Jy ! Component: 200 - total flux cleaned = -0.000147105 Jy ! Total flux subtracted in 200 components = -0.000147105 Jy ! Clean residual min=-0.002924 max=0.002611 Jy/beam ! Clean residual mean=-0.000003 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.0760387 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.0760387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.079818Jy sigma=0.471647 ! Fit after self-cal, rms=0.080022Jy sigma=0.471305 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080022Jy sigma=0.471305 ! Fit after self-cal, rms=0.085076Jy sigma=0.470081 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=7.918 mas, bpa=-0.9934 degrees ! Estimated noise=1.37406 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267427 Jy ! Component: 100 - total flux cleaned = 0.000267556 Jy ! Component: 150 - total flux cleaned = 0.000265808 Jy ! Component: 200 - total flux cleaned = 0.000250476 Jy ! Total flux subtracted in 200 components = 0.000250476 Jy ! Clean residual min=-0.002689 max=0.002445 Jy/beam ! Clean residual mean=-0.000002 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.0762892 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 43 components and 0.0762892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085063Jy sigma=0.470033 ! Fit after self-cal, rms=0.085172Jy sigma=0.469971 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.79583e-05 Jy ! Component: 100 - total flux cleaned = 1.38154e-05 Jy ! Component: 150 - total flux cleaned = 1.25664e-05 Jy ! Component: 200 - total flux cleaned = 1.22047e-06 Jy ! Total flux subtracted in 200 components = 1.22047e-06 Jy ! Clean residual min=-0.002716 max=0.002433 Jy/beam ! Clean residual mean=-0.000002 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0762904 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.0762904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085165Jy sigma=0.469949 ! Fit after self-cal, rms=0.085165Jy sigma=0.469946 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085165Jy sigma=0.469946 ! Fit after self-cal, rms=0.085078Jy sigma=0.469926 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=7.895 mas, bpa=-0.9224 degrees ! Estimated noise=1.36996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019846 Jy ! Component: 100 - total flux cleaned = 0.000197706 Jy ! Component: 150 - total flux cleaned = 0.000224269 Jy ! Component: 200 - total flux cleaned = 0.000236359 Jy ! Total flux subtracted in 200 components = 0.000236359 Jy ! Clean residual min=-0.002654 max=0.002426 Jy/beam ! Clean residual mean=-0.000002 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.0765268 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.0765268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085070Jy sigma=0.469899 ! Fit after self-cal, rms=0.085074Jy sigma=0.469897 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.28903e-06 Jy ! Component: 100 - total flux cleaned = 1.02143e-06 Jy ! Component: 150 - total flux cleaned = 1.63364e-06 Jy ! Component: 200 - total flux cleaned = 1.94001e-06 Jy ! Total flux subtracted in 200 components = 1.94001e-06 Jy ! Clean residual min=-0.002657 max=0.002430 Jy/beam ! Clean residual mean=-0.000002 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.0765287 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.0765287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085069Jy sigma=0.469883 ! Fit after self-cal, rms=0.085068Jy sigma=0.469881 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085068Jy sigma=0.469881 ! Fit after self-cal, rms=0.084726Jy sigma=0.469871 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.257 mas, bmaj=16.46 mas, bpa=7.14 degrees ! Estimated noise=1.729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000718072 Jy ! Component: 100 - total flux cleaned = 0.000732062 Jy ! Component: 150 - total flux cleaned = 0.000743843 Jy ! Component: 200 - total flux cleaned = 0.000762649 Jy ! Total flux subtracted in 200 components = 0.000762649 Jy ! Clean residual min=-0.003008 max=0.002588 Jy/beam ! Clean residual mean=-0.000005 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.0772913 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 51 components and 0.0772913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.084732Jy sigma=0.469891 ! Fit after self-cal, rms=0.084722Jy sigma=0.469871 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.42825e-06 Jy ! Component: 100 - total flux cleaned = 2.37496e-06 Jy ! Component: 150 - total flux cleaned = 1.20701e-05 Jy ! Component: 200 - total flux cleaned = 2.08578e-05 Jy ! Total flux subtracted in 200 components = 2.08578e-05 Jy ! Clean residual min=-0.003001 max=0.002590 Jy/beam ! Clean residual mean=-0.000005 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.0773122 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 54 components and 0.0773122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.084727Jy sigma=0.469887 ! Fit after self-cal, rms=0.084716Jy sigma=0.469874 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=7.875 mas, bpa=-0.8649 degrees ! Estimated noise=1.3667 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.11 x 7.875 at -0.8649 degrees (North through East) ! Clean map min=-0.0025056 max=0.068948 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.547 mas, bmaj=6.603 mas, bpa=-0.7763 degrees ! Estimated noise=2.11933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0511718 Jy ! Component: 100 - total flux cleaned = 0.0629929 Jy ! Component: 150 - total flux cleaned = 0.0686987 Jy ! Component: 200 - total flux cleaned = 0.0723349 Jy ! Total flux subtracted in 200 components = 0.0723349 Jy ! Clean residual min=-0.004782 max=0.004461 Jy/beam ! Clean residual mean=0.000005 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 0.072335 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.072335 Jy ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=7.875 mas, bpa=-0.8649 degrees ! Estimated noise=1.3667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370718 Jy ! Component: 100 - total flux cleaned = 0.00462682 Jy ! Component: 150 - total flux cleaned = 0.00470539 Jy ! Component: 200 - total flux cleaned = 0.0047375 Jy ! Total flux subtracted in 200 components = 0.0047375 Jy ! Clean residual min=-0.002814 max=0.002352 Jy/beam ! Clean residual mean=-0.000002 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.0770725 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.0770725 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.257 mas, bmaj=16.46 mas, bpa=7.14 degrees ! Estimated noise=1.729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358035 Jy ! Component: 100 - total flux cleaned = 0.000360518 Jy ! Component: 150 - total flux cleaned = 0.000361543 Jy ! Component: 200 - total flux cleaned = 0.000362111 Jy ! Total flux subtracted in 200 components = 0.000362111 Jy ! Clean residual min=-0.003091 max=0.002562 Jy/beam ! Clean residual mean=-0.000005 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.0774346 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.82795e-07 Jy ! Component: 100 - total flux cleaned = 6.05467e-07 Jy ! Component: 150 - total flux cleaned = -9.1267e-06 Jy ! Component: 200 - total flux cleaned = -9.12298e-06 Jy ! Total flux subtracted in 200 components = -9.12298e-06 Jy ! Clean residual min=-0.003073 max=0.002557 Jy/beam ! Clean residual mean=-0.000005 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.0774255 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 32 components and 0.0774255 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=7.875 mas, bpa=-0.8649 degrees ! Estimated noise=1.3667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000386909 Jy ! Component: 100 - total flux cleaned = -0.000413876 Jy ! Component: 150 - total flux cleaned = -0.000413736 Jy ! Component: 200 - total flux cleaned = -0.000414124 Jy ! Total flux subtracted in 200 components = -0.000414124 Jy ! Clean residual min=-0.002777 max=0.002368 Jy/beam ! Clean residual mean=-0.000002 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0770113 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0770113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.084713Jy sigma=0.469894 ! Fit after self-cal, rms=0.084700Jy sigma=0.469869 wmodel J1608-1625_S_map.mod ! Writing 37 model components to file: J1608-1625_S_map.mod wobs J1608-1625_S_uvs.fits ! Writing UV FITS file: J1608-1625_S_uvs.fits wwins J1608-1625_S_map.win ! wwins: Wrote 1 windows to J1608-1625_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000775087 Jy ! Component: 100 - total flux cleaned = -0.00107475 Jy ! Component: 150 - total flux cleaned = -0.00147124 Jy ! Component: 200 - total flux cleaned = -0.00173273 Jy ! Component: 250 - total flux cleaned = -0.0019462 Jy ! Component: 300 - total flux cleaned = -0.00198201 Jy ! Component: 350 - total flux cleaned = -0.00191868 Jy ! Component: 400 - total flux cleaned = -0.00176361 Jy ! Component: 450 - total flux cleaned = -0.00161448 Jy ! Component: 500 - total flux cleaned = -0.00149988 Jy ! Component: 550 - total flux cleaned = -0.00155518 Jy ! Component: 600 - total flux cleaned = -0.00147271 Jy ! Component: 650 - total flux cleaned = -0.00147286 Jy ! Component: 700 - total flux cleaned = -0.00157713 Jy ! Component: 750 - total flux cleaned = -0.0016533 Jy ! Component: 800 - total flux cleaned = -0.001703 Jy ! Component: 850 - total flux cleaned = -0.00184954 Jy ! Component: 900 - total flux cleaned = -0.00199333 Jy ! Component: 950 - total flux cleaned = -0.00211061 Jy ! Component: 1000 - total flux cleaned = -0.00208714 Jy ! Component: 1050 - total flux cleaned = -0.00220105 Jy ! Component: 1100 - total flux cleaned = -0.00226832 Jy ! Component: 1150 - total flux cleaned = -0.0024004 Jy ! Component: 1200 - total flux cleaned = -0.002509 Jy ! Component: 1250 - total flux cleaned = -0.00263694 Jy ! Component: 1300 - total flux cleaned = -0.00265808 Jy ! Component: 1350 - total flux cleaned = -0.00284411 Jy ! Component: 1400 - total flux cleaned = -0.00290528 Jy ! Component: 1450 - total flux cleaned = -0.00298586 Jy ! Component: 1500 - total flux cleaned = -0.00312507 Jy ! Component: 1550 - total flux cleaned = -0.00326202 Jy ! Component: 1600 - total flux cleaned = -0.00332036 Jy ! Component: 1650 - total flux cleaned = -0.00337794 Jy ! Component: 1700 - total flux cleaned = -0.00349127 Jy ! Component: 1750 - total flux cleaned = -0.00349115 Jy ! Component: 1800 - total flux cleaned = -0.00358284 Jy ! Component: 1850 - total flux cleaned = -0.00356469 Jy ! Component: 1900 - total flux cleaned = -0.00361868 Jy ! Component: 1950 - total flux cleaned = -0.00361858 Jy ! Component: 2000 - total flux cleaned = -0.00363635 Jy ! Component: 2050 - total flux cleaned = -0.00367138 Jy ! Component: 2100 - total flux cleaned = -0.00374001 Jy ! Component: 2150 - total flux cleaned = -0.00377362 Jy ! Component: 2200 - total flux cleaned = -0.00372326 Jy ! Component: 2250 - total flux cleaned = -0.00372357 Jy ! Component: 2300 - total flux cleaned = -0.00377295 Jy ! Component: 2350 - total flux cleaned = -0.00377283 Jy ! Component: 2400 - total flux cleaned = -0.00383681 Jy ! Component: 2450 - total flux cleaned = -0.00375701 Jy ! Component: 2500 - total flux cleaned = -0.00375702 Jy ! Component: 2550 - total flux cleaned = -0.00372569 Jy ! Component: 2600 - total flux cleaned = -0.00371017 Jy ! Component: 2650 - total flux cleaned = -0.00361782 Jy ! Component: 2700 - total flux cleaned = -0.00358769 Jy ! Component: 2750 - total flux cleaned = -0.00352732 Jy ! Component: 2800 - total flux cleaned = -0.00349727 Jy ! Component: 2850 - total flux cleaned = -0.00346761 Jy ! Component: 2900 - total flux cleaned = -0.00342339 Jy ! Component: 2950 - total flux cleaned = -0.00339427 Jy ! Component: 3000 - total flux cleaned = -0.00333635 Jy ! Component: 3050 - total flux cleaned = -0.00336498 Jy ! Component: 3100 - total flux cleaned = -0.00326477 Jy ! Component: 3150 - total flux cleaned = -0.00320804 Jy ! Component: 3200 - total flux cleaned = -0.0032081 Jy ! Component: 3250 - total flux cleaned = -0.00313802 Jy ! Component: 3300 - total flux cleaned = -0.0031382 Jy ! Component: 3350 - total flux cleaned = -0.00315206 Jy ! Component: 3400 - total flux cleaned = -0.00313818 Jy ! Component: 3450 - total flux cleaned = -0.00313826 Jy ! Component: 3500 - total flux cleaned = -0.00313822 Jy ! Component: 3550 - total flux cleaned = -0.0031114 Jy ! Component: 3600 - total flux cleaned = -0.00312471 Jy ! Component: 3650 - total flux cleaned = -0.00313803 Jy ! Component: 3700 - total flux cleaned = -0.00316429 Jy ! Component: 3750 - total flux cleaned = -0.00315116 Jy ! Component: 3800 - total flux cleaned = -0.00316426 Jy ! Component: 3850 - total flux cleaned = -0.00320315 Jy ! Component: 3900 - total flux cleaned = -0.00317738 Jy ! Component: 3950 - total flux cleaned = -0.00319043 Jy ! Component: 4000 - total flux cleaned = -0.00322878 Jy ! Component: 4050 - total flux cleaned = -0.00326691 Jy ! Total flux subtracted in 4096 components = -0.00326686 Jy ! Clean residual min=-0.000817 max=0.000669 Jy/beam ! Clean residual mean=-0.000000 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.0737445 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 305 components and 0.0737444 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1608-1625_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.11 x 7.875 at -0.8649 degrees (North through East) ! Clean map min=-0.0016464 max=0.068699 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1608-1625_S_map.fits wmodel /image_prod/ug002_uva//J1608-1625_S_map.mod ! Writing 305 model components to file: /image_prod/ug002_uva//J1608-1625_S_map.mod wobs /image_prod/ug002_uva//J1608-1625_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1608-1625_S_uvs.fits wwins /image_prod/ug002_uva//J1608-1625_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J1608-1625_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0686992 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000213881 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.933989 0.933989 1.86798 3.73595 7.47191 14.9438 29.8876 59.7753 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.068 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 321.203 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1608-1625_S_dfm.log closed on Thu Mar 5 02:35:36 2020