! Started logfile: /image_prod/ug002_uva//J1608+4012_S_dfm.log on Thu Mar 5 02:35:11 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J1608+4012_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J1608+4012_S_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.901389 visibilities/baseline/integration-bin. ! Found source: J1608+4012 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 5841 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1608+4012_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011677Jy sigma=8.760251 ! Fit after self-cal, rms=0.842153Jy sigma=7.314959 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=7.406 mas, bpa=-29.71 degrees ! Estimated noise=1.61067 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123794 Jy ! Component: 100 - total flux cleaned = 0.15079 Jy ! Total flux subtracted in 100 components = 0.15079 Jy ! Clean residual min=-0.005438 max=0.010778 Jy/beam ! Clean residual mean=-0.000014 rms=0.001897 Jy/beam ! Combined flux in latest and established models = 0.15079 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.15079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086981Jy sigma=0.529627 ! Fit after self-cal, rms=0.086964Jy sigma=0.529493 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.971 mas, bmaj=8.241 mas, bpa=-30.1 degrees ! Estimated noise=1.11446 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327141 Jy ! Component: 100 - total flux cleaned = 0.00297839 Jy ! Component: 150 - total flux cleaned = 0.00297963 Jy ! Component: 200 - total flux cleaned = 0.00307399 Jy ! Total flux subtracted in 200 components = 0.00307399 Jy ! Clean residual min=-0.005700 max=0.010729 Jy/beam ! Clean residual mean=-0.000021 rms=0.002022 Jy/beam ! Combined flux in latest and established models = 0.153864 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.153864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.086040Jy sigma=0.525886 ! Fit after self-cal, rms=0.086034Jy sigma=0.525865 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.971 x 8.241 at -30.1 degrees (North through East) ! Clean map min=-0.0056006 max=0.15766 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.93 KP 1.03 ! LA 0.95 MK 1.03 NL 0.92 OV 1.16 ! PT 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.94 KP 0.98 ! LA 0.98 MK 1.00 NL 0.98 OV 1.25 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.96 KP 0.99 ! LA 0.99 MK 0.98 NL 1.01 OV 1.19 ! PT 0.97 ! ! ! Fit before self-cal, rms=0.086034Jy sigma=0.525865 ! Fit after self-cal, rms=0.086111Jy sigma=0.510730 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.945 mas, bmaj=8.187 mas, bpa=-30.38 degrees ! Estimated noise=1.11155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000746522 Jy ! Component: 100 - total flux cleaned = 0.000742952 Jy ! Component: 150 - total flux cleaned = 0.000740712 Jy ! Component: 200 - total flux cleaned = 0.000805645 Jy ! Total flux subtracted in 200 components = 0.000805645 Jy ! Clean residual min=-0.006115 max=0.007240 Jy/beam ! Clean residual mean=-0.000023 rms=0.001768 Jy/beam ! Combined flux in latest and established models = 0.154669 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.154669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085710Jy sigma=0.509483 ! Fit after self-cal, rms=0.085714Jy sigma=0.509368 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.085714Jy sigma=0.509368 ! Fit after self-cal, rms=0.070035Jy sigma=0.452464 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.946 mas, bmaj=8.139 mas, bpa=-30.21 degrees ! Estimated noise=1.11039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114917 Jy ! Component: 100 - total flux cleaned = 0.00110544 Jy ! Component: 150 - total flux cleaned = 0.00110521 Jy ! Component: 200 - total flux cleaned = 0.00107591 Jy ! Total flux subtracted in 200 components = 0.00107591 Jy ! Clean residual min=-0.001919 max=0.002194 Jy/beam ! Clean residual mean=-0.000007 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.155745 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 31 components and 0.155745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.069981Jy sigma=0.451758 ! Fit after self-cal, rms=0.070168Jy sigma=0.451313 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.08098e-05 Jy ! Component: 100 - total flux cleaned = 1.31618e-05 Jy ! Component: 150 - total flux cleaned = 3.55072e-05 Jy ! Component: 200 - total flux cleaned = 7.51093e-05 Jy ! Total flux subtracted in 200 components = 7.51093e-05 Jy ! Clean residual min=-0.001923 max=0.002206 Jy/beam ! Clean residual mean=-0.000007 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.15582 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.15582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070155Jy sigma=0.451165 ! Fit after self-cal, rms=0.070154Jy sigma=0.451156 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070154Jy sigma=0.451156 ! Fit after self-cal, rms=0.071240Jy sigma=0.450474 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.95 mas, bmaj=8.115 mas, bpa=-30.03 degrees ! Estimated noise=1.1086 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000618075 Jy ! Component: 100 - total flux cleaned = 0.000618133 Jy ! Component: 150 - total flux cleaned = 0.000591764 Jy ! Component: 200 - total flux cleaned = 0.000570578 Jy ! Total flux subtracted in 200 components = 0.000570578 Jy ! Clean residual min=-0.001897 max=0.002184 Jy/beam ! Clean residual mean=-0.000007 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.156391 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.156391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071220Jy sigma=0.450190 ! Fit after self-cal, rms=0.071227Jy sigma=0.450181 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (61.5, -122.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169245 Jy ! Component: 100 - total flux cleaned = 0.00199437 Jy ! Component: 150 - total flux cleaned = 0.00207478 Jy ! Component: 200 - total flux cleaned = 0.00214523 Jy ! Total flux subtracted in 200 components = 0.00214523 Jy ! Clean residual min=-0.001792 max=0.001690 Jy/beam ! Clean residual mean=-0.000004 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.158536 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 71 components and 0.158536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071164Jy sigma=0.449693 ! Fit after self-cal, rms=0.071165Jy sigma=0.449672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071165Jy sigma=0.449672 ! Fit after self-cal, rms=0.071239Jy sigma=0.449568 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.191 mas, bmaj=10.01 mas, bpa=-38.28 degrees ! Estimated noise=1.2797 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000391178 Jy ! Component: 100 - total flux cleaned = 0.000389475 Jy ! Component: 150 - total flux cleaned = 0.000389056 Jy ! Component: 200 - total flux cleaned = 0.000405161 Jy ! Total flux subtracted in 200 components = 0.000405161 Jy ! Clean residual min=-0.001930 max=0.001747 Jy/beam ! Clean residual mean=-0.000006 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.158941 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 84 components and 0.158941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071226Jy sigma=0.449447 ! Fit after self-cal, rms=0.071222Jy sigma=0.449437 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.05735e-05 Jy ! Component: 100 - total flux cleaned = -9.76555e-05 Jy ! Component: 150 - total flux cleaned = -9.78227e-05 Jy ! Component: 200 - total flux cleaned = -9.76336e-05 Jy ! Total flux subtracted in 200 components = -9.76336e-05 Jy ! Clean residual min=-0.001932 max=0.001759 Jy/beam ! Clean residual mean=-0.000007 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.158844 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 88 components and 0.158844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071219Jy sigma=0.449400 ! Fit after self-cal, rms=0.071218Jy sigma=0.449396 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.953 mas, bmaj=8.102 mas, bpa=-29.92 degrees ! Estimated noise=1.10849 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.953 x 8.102 at -29.92 degrees (North through East) ! Clean map min=-0.0017564 max=0.15739 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.204 mas, bmaj=7.291 mas, bpa=-29.66 degrees ! Estimated noise=1.59736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122769 Jy ! Component: 100 - total flux cleaned = 0.149543 Jy ! Component: 150 - total flux cleaned = 0.155695 Jy ! Component: 200 - total flux cleaned = 0.157097 Jy ! Total flux subtracted in 200 components = 0.157097 Jy ! Clean residual min=-0.002805 max=0.002943 Jy/beam ! Clean residual mean=-0.000002 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.157097 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.157097 Jy ! Inverting map and beam ! Estimated beam: bmin=3.953 mas, bmaj=8.102 mas, bpa=-29.92 degrees ! Estimated noise=1.10849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000677752 Jy ! Component: 100 - total flux cleaned = 0.00103161 Jy ! Component: 150 - total flux cleaned = 0.00154906 Jy ! Component: 200 - total flux cleaned = 0.00203207 Jy ! Total flux subtracted in 200 components = 0.00203207 Jy ! Clean residual min=-0.001801 max=0.001671 Jy/beam ! Clean residual mean=-0.000003 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.159129 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 31 components and 0.159129 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.191 mas, bmaj=10.01 mas, bpa=-38.28 degrees ! Estimated noise=1.2797 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000614507 Jy ! Component: 100 - total flux cleaned = 0.000787024 Jy ! Component: 150 - total flux cleaned = 0.000910358 Jy ! Component: 200 - total flux cleaned = 0.000976571 Jy ! Total flux subtracted in 200 components = 0.000976571 Jy ! Clean residual min=-0.001940 max=0.001706 Jy/beam ! Clean residual mean=-0.000006 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.160106 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.99828e-05 Jy ! Component: 100 - total flux cleaned = 2.06935e-05 Jy ! Component: 150 - total flux cleaned = 2.102e-05 Jy ! Component: 200 - total flux cleaned = 2.10906e-05 Jy ! Total flux subtracted in 200 components = 2.10906e-05 Jy ! Clean residual min=-0.001953 max=0.001700 Jy/beam ! Clean residual mean=-0.000007 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.160127 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 66 components and 0.160127 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.953 mas, bmaj=8.102 mas, bpa=-29.92 degrees ! Estimated noise=1.10849 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.21908e-05 Jy ! Component: 100 - total flux cleaned = -0.000152214 Jy ! Component: 150 - total flux cleaned = -0.000179429 Jy ! Component: 200 - total flux cleaned = -0.000178262 Jy ! Total flux subtracted in 200 components = -0.000178262 Jy ! Clean residual min=-0.001705 max=0.001636 Jy/beam ! Clean residual mean=-0.000004 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.159948 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 0.159948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071212Jy sigma=0.449256 ! Fit after self-cal, rms=0.071215Jy sigma=0.449209 wmodel J1608+4012_S_map.mod ! Writing 83 model components to file: J1608+4012_S_map.mod wobs J1608+4012_S_uvs.fits ! Writing UV FITS file: J1608+4012_S_uvs.fits wwins J1608+4012_S_map.win ! wwins: Wrote 3 windows to J1608+4012_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000153308 Jy ! Component: 100 - total flux cleaned = -0.000125547 Jy ! Component: 150 - total flux cleaned = 3.32715e-05 Jy ! Component: 200 - total flux cleaned = 0.000261744 Jy ! Component: 250 - total flux cleaned = 0.000433127 Jy ! Component: 300 - total flux cleaned = 0.000599474 Jy ! Component: 350 - total flux cleaned = 0.000715652 Jy ! Component: 400 - total flux cleaned = 0.000828783 Jy ! Component: 450 - total flux cleaned = 0.000806682 Jy ! Component: 500 - total flux cleaned = 0.000785207 Jy ! Component: 550 - total flux cleaned = 0.000763623 Jy ! Component: 600 - total flux cleaned = 0.000701631 Jy ! Component: 650 - total flux cleaned = 0.00068167 Jy ! Component: 700 - total flux cleaned = 0.000661909 Jy ! Component: 750 - total flux cleaned = 0.000622818 Jy ! Component: 800 - total flux cleaned = 0.000488945 Jy ! Component: 850 - total flux cleaned = 0.000432737 Jy ! Component: 900 - total flux cleaned = 0.00034011 Jy ! Component: 950 - total flux cleaned = 0.000322215 Jy ! Component: 1000 - total flux cleaned = 0.000215137 Jy ! Component: 1050 - total flux cleaned = 0.000179631 Jy ! Component: 1100 - total flux cleaned = 7.54294e-05 Jy ! Component: 1150 - total flux cleaned = 2.441e-05 Jy ! Component: 1200 - total flux cleaned = -5.96359e-05 Jy ! Component: 1250 - total flux cleaned = -0.000125582 Jy ! Component: 1300 - total flux cleaned = -0.00017464 Jy ! Component: 1350 - total flux cleaned = -0.000206795 Jy ! Component: 1400 - total flux cleaned = -0.000302517 Jy ! Component: 1450 - total flux cleaned = -0.000349728 Jy ! Component: 1500 - total flux cleaned = -0.000427512 Jy ! Component: 1550 - total flux cleaned = -0.000473655 Jy ! Component: 1600 - total flux cleaned = -0.000504248 Jy ! Component: 1650 - total flux cleaned = -0.000624431 Jy ! Component: 1700 - total flux cleaned = -0.000683695 Jy ! Component: 1750 - total flux cleaned = -0.000742225 Jy ! Component: 1800 - total flux cleaned = -0.0007859 Jy ! Component: 1850 - total flux cleaned = -0.0008866 Jy ! Component: 1900 - total flux cleaned = -0.000957556 Jy ! Component: 1950 - total flux cleaned = -0.000999468 Jy ! Component: 2000 - total flux cleaned = -0.00111069 Jy ! Component: 2050 - total flux cleaned = -0.00111068 Jy ! Component: 2100 - total flux cleaned = -0.00120601 Jy ! Component: 2150 - total flux cleaned = -0.00125964 Jy ! Component: 2200 - total flux cleaned = -0.00127286 Jy ! Component: 2250 - total flux cleaned = -0.00129942 Jy ! Component: 2300 - total flux cleaned = -0.00133885 Jy ! Component: 2350 - total flux cleaned = -0.00135179 Jy ! Component: 2400 - total flux cleaned = -0.00139056 Jy ! Component: 2450 - total flux cleaned = -0.00145401 Jy ! Component: 2500 - total flux cleaned = -0.00145416 Jy ! Component: 2550 - total flux cleaned = -0.0014667 Jy ! Component: 2600 - total flux cleaned = -0.00151609 Jy ! Component: 2650 - total flux cleaned = -0.00151635 Jy ! Component: 2700 - total flux cleaned = -0.00157697 Jy ! Component: 2750 - total flux cleaned = -0.00155288 Jy ! Component: 2800 - total flux cleaned = -0.00157669 Jy ! Component: 2850 - total flux cleaned = -0.00161218 Jy ! Component: 2900 - total flux cleaned = -0.0016122 Jy ! Component: 2950 - total flux cleaned = -0.00163547 Jy ! Component: 3000 - total flux cleaned = -0.00168165 Jy ! Component: 3050 - total flux cleaned = -0.00171582 Jy ! Component: 3100 - total flux cleaned = -0.00169306 Jy ! Component: 3150 - total flux cleaned = -0.00170436 Jy ! Component: 3200 - total flux cleaned = -0.00170441 Jy ! Component: 3250 - total flux cleaned = -0.00172653 Jy ! Component: 3300 - total flux cleaned = -0.00173757 Jy ! Component: 3350 - total flux cleaned = -0.00178105 Jy ! Component: 3400 - total flux cleaned = -0.00179198 Jy ! Component: 3450 - total flux cleaned = -0.00180267 Jy ! Component: 3500 - total flux cleaned = -0.00182404 Jy ! Component: 3550 - total flux cleaned = -0.00187666 Jy ! Component: 3600 - total flux cleaned = -0.00184512 Jy ! Component: 3650 - total flux cleaned = -0.001897 Jy ! Component: 3700 - total flux cleaned = -0.00190739 Jy ! Component: 3750 - total flux cleaned = -0.00190736 Jy ! Component: 3800 - total flux cleaned = -0.00191752 Jy ! Component: 3850 - total flux cleaned = -0.0019377 Jy ! Component: 3900 - total flux cleaned = -0.00197774 Jy ! Component: 3950 - total flux cleaned = -0.00196774 Jy ! Component: 4000 - total flux cleaned = -0.00197752 Jy ! Component: 4050 - total flux cleaned = -0.00198743 Jy ! Total flux subtracted in 4096 components = -0.00201656 Jy ! Clean residual min=-0.000605 max=0.000538 Jy/beam ! Clean residual mean=-0.000002 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.157932 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 364 components and 0.157932 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J1608+4012_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.953 x 8.102 at -29.92 degrees (North through East) ! Clean map min=-0.0012381 max=0.15654 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J1608+4012_S_map.fits wmodel /image_prod/ug002_uva//J1608+4012_S_map.mod ! Writing 364 model components to file: /image_prod/ug002_uva//J1608+4012_S_map.mod wobs /image_prod/ug002_uva//J1608+4012_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J1608+4012_S_uvs.fits wwins /image_prod/ug002_uva//J1608+4012_S_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uva//J1608+4012_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.15654 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000180848 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.346584 0.346584 0.693169 1.38634 2.77267 5.54535 11.0907 22.1814 44.3628 88.7256 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.156 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 865.59 quit ! Quitting program ! Log file /image_prod/ug002_uva//J1608+4012_S_dfm.log closed on Thu Mar 5 02:35:15 2020